Ideal for use in remote and/or mobile locations where electricity is scarce, the Jet Edge iP55-280DS water jet intensifier pump is powered by a 280hp Cummins turbo diesel engine that meets Tier 3 emissions standards. It is capable of producing ...
Ideal for use in remote and/or mobile locations where electricity is scarce, the Jet Edge iP36-280DS waterjet intensifier pump is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions ...
The 50-horsepower iP3650 Jet Edge Mobile Waterjet Intensifier Pump is capable of producing of 36,000 psi (2,800 bar) of ultra-high pressure (UHP) water for mobile water jet cutting, ...
The Gardner Denver's line of reciprocating plunger pumps are used in multiple production and industrial ...
The TWS 600S offers a versatile small footprint pump that can perform a variety of duties for the well service industry. The unique design ...
QWS 1000S
The QWS 1000S offers a similar design as the TWS 600S with its small ...
The QWS 2500SD was developed to handle harsh frac conditions, as seen ...
The 02-series line of high-pressure pumps are rated up to 10875 psi/750 bar operating pressure and volumes of up to 229 l/min.
This series is ideal for cleaning pipes, tube bundles, sewer lines, tanks and containers. ...
Operating pressures up to 3625 psi/250 bar and rated volume up to approx. 400 l/min make this series a specialist for de-scaling operations as well as drain and pipe cleaning. The series, developed in keeping with ...
This series was specially developed for pumping water that is contaminated with granular or fibrous solids.The ARP®-high-pressure
plunger pumps have operating pressures up to 5800 psi/400 bar and volumes up to 1700 l/min1) and always work reliably with fluids ...
• Max. flow: 2.1 gpm/7.9 lpm (2220B-P and 2221B-P); 3.0 gpm/11.4 lpm (2230B-P and 2231B-P)
• Max. pressure: 1500 psi/103 bar (2221B-P and 2231B-P); 2000 psi/138 bar (2220B-P and 2230B-P)
• Max. rated speed: 1725 rpm (2220B-P and 2230B-P); 3450 rpm (2221B-P and 2231B-P)
• Max. fluid temperature: 160°F/71°C
Other Attributes
• ...
Features and Benefits:
• Delivers 8 gpm (30 L/min) of solution @ 1400 psi (96 BAR)
• Hypro triplex plunger pump provides dependability and high pressure performance
• Exclusive PowerPro™ ...
Self-serve carwash and tunnel prep unit owners are making the switch to Hypro's 2300 Series plunger pumps. Backed by the ...
Totally Enclosed Power End, protected from the liquid end by adjustable liquid end packing, ample sized cradle with drain connection, plunger slingers and power end seals, assures trouble-free operation.
Solid Power Transmission from forged steel crankshaft ensures the highest reliability. ...
Self-Aligning Plunger connection ensures proper concentricity within the stuffing box.
Valve Assemblies are independent of and clamped between manifolds and liquid cylinders.
Stuffing Box Assemblies are individually bolted to the liquid cylinder permitting easy accessibility and maintenance.
Three Lip Type Seals at each horizontal ...
Three Plunger Reciprocating Pumps
* Liquid ...
High pressure plunger pump is positive displacement reciprocating plunger pump. Such pumps are very efficient and often used to handle relatively small quantity of liquid at quite large delivery pressure.
In a reciprocating pump, a volume of liquid ...
PressureJet pumps are triplex (three plungers), positive displacement, triplex plunger pumps. We offer both the high pressure triplex piston and triplex plunger pumps. With the positive displacement design, each revolution of the crankshaft creates a direct motion in the plunger rods [piston] resulting in a positive output of flow from the pump. This output from ...
PressureJet pumps are triplex (three plungers), positive displacement, industrial high pressure triplex plunger pumps. We offer both the triplex piston and triplex plunger pumps. With the positive displacement design, each revolution of the crankshaft creates a direct motion in the plunger rods [piston] resulting in a positive output of flow from the pump. This output from the pump [flow] is in direct ...
Hammelmann high pressure pumps are built to operate at the continuous
maximum duty stated ...
Hammelmann high pressure pumps are built to operate at the continuous
maximum duty stated ...
Hammelmann high pressure pumps are built to operate at the continuous
maximum duty ...
Hammelmann high pressure pumps are built to operate at the continuous ...
The DP Series plunger pump adds a new dimension of rugged versatility to ...
Hammelmann process plunger pumps are designed for continuous ...
Cat Pumps offers a range of belt-driven pumps from 0.13 GPM up to 240 GPM. Belt-drive is a very popular option because of the flow flexibility given within pulley ratios. ...
Cat Pumps offers a complete line of stainless steel pumps to meet the demands of many industrial applications. Available as 304, 316 and duplex stainless steel, these pumps are stock items at Cat ...
Cat Pumps’ direct-drive pumps offer a compact and cost-effective pump mounting, and are available for electric and engine drives. This option allows for easy installation with the pump mounting directly to ...
Performance Information
• Max. flow: 2.1 gpm/7.9 lpm (2220B-P and 2221B-P); 3.0 gpm/11.4 lpm (2230B-P and 2231B-P)
• Max. pressure: 1500 psi/103 bar (2221B-P and 2231B-P); 2000 psi/138 bar (2220B-P and 2230B-P)
• Max. rated speed: 1725 rpm (2220B-P and 2230B-P); 3450 rpm (2221B-P and 2231B-P)
• Max. fluid temperature: 160°F/71°C
Other ...
The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 ...
The Hypro 2545S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 47 gpm (177 lpm) and 1200 ...
Triplex plunger pumps according to API 674 norms
Stroke: 68 mm
Plunger design load: 2885 Kg
Maximum power at shaft end: 56.5 ...
Triplex plunger pumps according to API 674 norms
Stroke: 78 mm
Plunger design load: 4134 Kg
Maximum power at shaft end: ...
Triplex plunger pumps according to API 674 norms
Stroke: 125 mm
Plunger design load: 9025 Kg
Maximum power at shaft end: 191.1 ...
