Metal profiles, profiles for modular structures

75 companies | 307 products
Filters
  • What’s new?

Using high-tensile aluminium profiles, any type of structure can...

Line D30 from item – simple, flexible and efficient!

Simple handling is the key feature of Line D30 and delivers maximum cost efficiency in the continuous improvement of manufacturing processes. It is made possible by non-machined...

aluminum profile / clean-room - Baureihe X

MB building kit system profiles in line X are featured by a completely smooth and closed connection, with a small edge radius. They can be connected to perfectly...

aluminum profile system - 40 mm | Baureihe 8

Aluminum profile system with a modular dimension of 40mm. There are...

aluminum profile system - 50 mm | Baureihe 10

The Line 10 is an MB building kit system manufactured by item that features a durable M10 thread and profile furrows that is attributed with outstanding...

{{productDetail[13749]}}
aluminum profile - RoHS

The Movomechs Mechprofile aluminum selection is highly enhanced and now features minimum tare weight, maximum boosted bearing strength and torsional rigidity. This range...

{{productDetail[68901]}}
aluminum profile - F-40 BLOCAN®

A new flange bracket aluminium profile has been added to complete the construction profile range. Like all BLOCAN...

aluminum profile - BLOCAN®

A variety of profile geometries and sizes allows optimal adaptation to prevailing technical and economic conditions. The construction profiles from the structural profiles range set their focus on optimal connection options...

aluminum profile / heavy-duty - BLOCAN®

This piece of construction wisdom is now well out of date. The BLOCAN® aluminium heavy duty profiles with a slot...

{{productDetail[11638]}}
profile system - tesamoll® D-Profile

Self-adhesive, easy to install gasket for doors and windows tesamoll ®, D Profile is recommended especially for sealing very...

profile system - tesamoll® E-Profile

The tesamoll® E-Profile is a rubber, self-adhesive seal for filling minute gaps in doors and windows. It can withstand harsh climatic conditions...

profile system - -50 °C .. 60 °C | tesamoll® P-Profile

The tesamoll® P-Profile is made with a highly durable self adhering rubber. This quality makes the P-Profile...

profile system - tesamoll® STANDARD I-Profile

The tesamoll STANDARD I-Profile is soft and flexible, it is utilized specifically...

{{productDetail[26521]}}
aluminum profile - PP series

Isel's PP Series of panel profiles are generally used for simple frame, bench, and rack erection operations. They...

aluminum profile - PU 25 / PU 50 series

Isel's PL 25 is part of the company's PU 50 Series of universal profiles. The tools are generally used for simple...

aluminum profile - PT 25 series

Universal precision, clamping and machining surface
Aluminium, naturally...

aluminum profile - PT 50 series

The PT 50 series by Isel Germany is an aluminum profile which features its Universal...

aluminum profile - RE 40 series

The Aluminum profile of the RE 40 series offers its highly-precised, clamping and machining surface....

{{productDetail[6054]}}
aluminum profile - RE 40 series

Over 250 profile cross sections made of high-quality alloys, stability-oriented connection technology , and an extensive line of accessories - this is the basis for implementing your projects, from a simple frame...

aluminum profile - 25 series

For developing custom designs of display cabinets, light-weight frames, and electronics housing, we provide highly versatile series 25 profile beams. The beams come in multiples of 25x25 mm dimensions, and the cross-section can...

aluminum profile - 40 series

The Series 40, manufactured by MK® Technology Group, is a series of aluminum profiles that are built on grid dimensions measuring 40mm x 40mm. Specifically designed for usage with DIN M8 screws, this profile...

aluminum profile - 50 series

The series 50 is built on the grid dimension 50 x 50 mm and its multiples. The groove width of 10 mm and the groove depth of 12 mm are designed for use with DIN M8 screws. Fastening with M4, M5 and M6 threaded unions is also possible.

The...

aluminum profile - 60 series

The series 60 is built on the grid dimension 60 x 60 mm and its multiples. The groove width of 14 mm and the groove depth of 19 mm are designed for the use of M12 DIN screws. Fastening with M6, M8 and M10 threaded unions is also...

{{productDetail[15404]}}
aluminum profile - MCS Series

A comprehensive system of profiles together with an enhanced range of fixing elements including brackets, flexi connectors and accessories to enable complete frames to be constructed by the customer from components or supplied flat packed for simple re-assembly....

{{productDetail[159]}}
cast iron rectangular block - 01160

The 01680 U cast iron profile, manufactured by Norelem,...

L-section proifle - 01440

The 01440 is a U cast iron profile made of stabilised GJL 250 grey cast iron...

L-section proifle - 01520

The 01520 Series of Unequal L-Section Aluminum Profile, manufactured...

{{productDetail[7884]}}
cast iron profile / wide flange - 01560

907 H-section is a cast iron steel profiles manufactured by WDS. The tools' end...

cast iron profile / wide flange - 01560

The 946 series is manufactured by WDS, and is an unequal L section that is made...

{{productDetail[14778]}}
cast iron profile / wide flange - 01560

The world has woken up to the dangers wrought by high carbon footprints of manufacturing industries. There is a growing clamor for decreasing the carbon output of industries along with maximum preservation of available resources. Organizations are looking for innovative solutions that allow them to "go green" even while maintaining their productivity levels and profit...

cast iron profile / wide flange - 01560

Independent of the type of vehicle, the materials used in manufacture must possess a comprehensive range of characteristics, including stability and strength for the optimum protection and safety of the passengers. In addition, lightness and flexibility are vital to a reduction...

cast iron profile / wide flange - 01560

The Steel profile, developed by Welser Profile, is mainly used for transport technology. It is built with wagon structure offering...

cast iron profile / wide flange - 01560


Efficient construction progress through the safety, stability and flexibility provided by Welser...

cast iron profile / wide flange - 01560

The steel profile systems RP-ISO-Hermetic and Multitop manufactured by Welser Profile, play a decisive role in these façade systems. This is because the possible size of the photovoltaic module of up to 2440*5100mm...

{{productDetail[12772]}}
steel profile / U - max. 12 m, max. 78.75 kg/m | NbV series

The NbV Series, manufactured by Winkel, is a U steel profile equipped with a high-quality...

steel profile / U - max. 12 m, max. 70.6 kg/m | PR series

WINKEL Precision U-Profiles NbV is the perfect...

steel profile / I - max. 12 m, max. 51.4 kg/m | NbV series

The NbV series by Winkel is an I steel profile which is designed for high capacity...

heavy-duty profile - max. 12 m,  max. 382.9 kg/m | Jumbo series

The Jumbo series, manufactured by Winkel®, is utilized as a heavy-duty profile...

stainless steel profile / U - max. 6 m, max. 20.9 kg/m

Winkel Bearing's U-Profiles in Inox are designed and manufactured out of stainless steel materials,...

{{productDetail[7055]}}
stainless steel profile / U - max. 6 m, max. 20.9 kg/m

To cover size 8 and 10 profile slots
Material Plastic...

{{productDetail[14913]}}
stainless steel profile / U - max. 6 m, max. 20.9 kg/m

Many of the metal sections we produce, and aluminium extrusions in particular, are often combined with plastic or rubber profiles in order to create complete systems for dedicated applications. Prime examples are hinges for luggage compartment flaps and...

{{productDetail[14805]}}
stainless steel profile / U - max. 6 m, max. 20.9 kg/m

Rail systems

Profile rail
Profile...

stainless steel profile / U - max. 6 m, max. 20.9 kg/m

KTS mounting systems form the solid base for light...

{{productDetail[12326]}}
stainless steel profile / U - max. 6 m, max. 20.9 kg/m

ROBOMEC is a modular system with aluminium profiles standard components for building aluminium structures for industrial automation: work stations, structures for machines, robots, feeding units, laboratory benches, accident...

{{productDetail[4836]}}
{{productDetail[60286]}}
aluminum profile - 25 X 25 mm

The industrial profile is an updated unit from Sigma Profil Market. The profile...

aluminum profile - 20 X 20 mm

It is mostly used in the production...

aluminum profile - 30 X 30 mm

The Heavy-duty aluminum profile, manufactured by Dogus Kalip ®, is ideal...

aluminum profile - 30 X 60 mm

The 30x60 Aluminum Industrial Profile is ideally designed to provide a good quality performance...

aluminum profile - 30 X 90 mm

The 30 X 90 Aluminium Industrial Profile from Sigma Profile Market may be applied...

{{productDetail[69599]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation