Components for modular structures

67 companies | 241 products
Filters
  • What’s new?
    Submit

The clamping bores of the two-way connector clamps GN 132 are mechanically machined and...

The clamping bores of the two-way connector clamps GN 132.5 are mechanically machined and...

The clamping bores of the two-way connector clamps GN 133 are mechanically machined and...

The clamping bores of the flanged connector clamps GN 145 are mechanically machined and designed for construction...

The clamping bores of the flanged connector clamps GN 146 are mechanically machined and...

{{productDetail[15596]}}

When the end of the profile is not quite the end of the frame, its time to use Butt Fastener...

{{productDetail[13749]}}

The SQT series angles for profile structures are made of polyamide-based (PA) technopolymer material that is reinforced with glass fiber. These robust, sturdy, compact, rigid and stable angles are...

Aluminium.

Standard executions
- SQMA-B-MT: natural aluminium, matte finish.
- SQMA-B-SW: aluminium, epoxy resin coating, RAL 9005 black colour, matte finish.
- SQMA-B-SR: aluminium, epoxy...

The innovative SQMF Angles made for profile structures is a highly robust unit made mostly of aluminum with a cover made from glass-fiber reinforced polyamide-based...

The GN 131 range of two-way connecting clamps are made with aluminum. These two-way connecting clamps are designed with assembly holes that allow them to be paired...

The GN 133 range of two-way connecting clamps are made with aluminum. These two-way connecting clamps are designed with assembly holes that allow them to be...

{{productDetail[9336]}}

Tubular connectorss RV

Material:
Chill casting of high-grade aluminium alloy in accordance with DIN 1725.

Surface...

Tubular connectors RV are made up of chill casting high-grade aluminium alloy that passed the DIN 1725 requirement. It has...

The Rohde AG Tubular Connectors RV are made of high grade aluminum alloy which has been subjected to chill casting that is compliant to DIN...

Rohde offers tubular connectors RV that are at par with the standards of DIN 1725. These tubular connectors...

Made with chill casting of high-grade aluminum alloy in accordance with DIN 1725, the tubular...

{{productDetail[12415]}}

Sugatsune PJ-60A 80A corner connector has an innovative drop-in design, which provides huge time savings in frame assembling....

This product manufactured by Sugatsune Kogyo is typically used for assemblies where the slide-in...

{{productDetail[16787]}}

The K0472 Cross clamps are equipped with round tubes that follow standard sizes of Ø18 mm or Ø30 mm. Made...

Made from black thermoplastic, the socket head screw to DIN 7984 and the hexagon nut to DIN 985 in galvanized steel....

Tubular connection elements basic sizes for round tubes available in Ø18 mm or Ø30 mm. When smaller tubes need to be converted...

The K0476 Angle clamps is made from cast aluminum and vibration ground. The clamping...

The base clamps are made of black thermoplastic with DIN 7984 socket head screw and DIN 985 hexagon nut in galvanized steel. The...

{{productDetail[12621]}}

The T-piece, corrugated pipe, s. steel by Wurth has a stainless steel material...

{{productDetail[18878]}}

X tubing connector, four-way connector to connect hoses.

-...

{{productDetail[63760]}}

Material: Polyamide
Color: grey (RAL 7037), black (RAL 9005)
Temperature...

TemperatureRange: Min-40℃,Max115℃,Short-term150℃
Color:...

Temperature Range: Min-40℃,Max115℃,Short-term150℃
Color: grey (RAL 7037),...

Temperature Range:Min-40℃,Max115℃,Short-term150℃
Color:...

{{productDetail[126851]}}
{{productDetail[20091]}}

The RR 6042 by GAV srl is a T-connector...

{{productDetail[100819]}}

The EH 23020 is manufactured by Hardler....

{{productDetail[13708]}}

157 fuse and holder series of Littelfuse finds a way out for automatic installation and a substitute for small Nano2® plane equipped fuses. These fuse...

{{productDetail[17136]}}

These are Tube connectors manufactured by Beisit Electric Co. which is made of PC...

{{productDetail[125481]}}

The system of assembly for tubes is composed of elements of tightening which are capable of creating gauges, installations, and operating systems. Also, it allows...

{{productDetail[39388]}}

The CIT series is a plastic tube connector developed by BMP Tappi. It is specifically...

The CTQ Series manufactured by BMP Tappi is a square tube connector that is made from...

The CT series is constructed from polyethylene or PE-HD...

{{productDetail[16057]}}

The RK ROSE+KRIEGER Robust stainless steel clamps are installed using standard tools, and are provided with a silicone thread...

The RK LightClamps plastic connection system guarantees utomost flexibility thanks to the...

The RK, manufactured by RK Rose + Kreiger, is a tube connector that has a simple design that enables the fast assembly...

The Robust Clamps series has been expanded through the addition of two new clamp connector...

{{productDetail[11638]}}

1-piece plastic tube holder
-40 °C to +120 °C approx.
Colour black or grey
Applications
For socure mounting of NORDUC** protection tubes
Properties
• on^piece
• string...

{{productDetail[26237]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation