Inserts
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
MATERIAL Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. STANDARD EXECUTION Nickel-plated brass boss with threaded pass-through hole.
... -tapping inserts. Inserts provide reusable threads and secure tight threaded joints. Inserts offer preservation of the threaded joint, proper seating torque, are unaffected by stress ...
SPIROL
Self-Tapping Inserts are available in Series 10 which is a thread forming insert for soft, flexible thermoplastics. Reduced thread profile and coarse pitch minimizes radial stress and potential hole wall ...
SPIROL
SPIROL Series 14 are Heat/Ultrasonic Inserts and are designed for post-mold installation in thermoplastics. Heat and ultrasonic installation yield outstanding performance results. Available in long and short variations, ...
SPIROL
... impregnated surface comparable to 100 grade abrasive grit. Form P with polyurethane surface, hardness Shore 60. Form F, hardened and black oxidised. Form M with carbide serrations, black oxidised. Note:Grippers and ...
HEINRICH KIPP WERK GmbH & Co. KG
... threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.Advantages:- ...
HEINRICH KIPP WERK GmbH & Co. KG
Material:Threaded insert in steel or stainless steel.Version:Passivated.Note:Threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired, enabling ...
HEINRICH KIPP WERK GmbH & Co. KG
Can be integrated into fixtures or clamping jaws to provide high holding forces on cast or workpieces. SKH51 steel Quenched and tempered Black oxide finish Heat treated to HRC62
Imao Corporation
Can be integrated into fixtures or clamping jaws to provide high holding forces on cast or workpieces. SKH51 steel Quenched and tempered Black oxide finish Heat treated to HRC62
Imao Corporation
Steel(SCM440) Quenched and tempered Black oxide finish Heat treated to Rc32 Carbide Heat treated to Rc72
Imao Corporation
Resilient threads on thin-walled components. With RIVKLE® biind rivet nuts and studs for sheets and plastics. For load-bearing threads RIVKLE® blind rivet nuts and studs reliably join thin-walled components. Highly resilient. RIVKLE® ...
... part of industry today. AMTEC® thread inserts make it possible to achieve the advantageous synergy effects resulting from high-strength metals in combination with plastics. Method / principle AMTEC® thread inserts ...
Thread reinforcement for metals KOBSERT® thread inserts are designed for creating vibration-resistant and torsion-proof nut threads in metal materials with low shear strength. Clever mechanics, easy use. Whenever ...
... in the field. Both inserts fit industry standard 9.5 mm square holes common to IT rack systems Front-mounting style enables use with tubular racks and crowded racks without convenient access Components mount to installed ...
Thread pitch - Fixing thread: M1,4 01860704 Diameter [mm] - 0,5 - Weight [g] - 1 - Weight [lb(s - 0,0022 01860201 Diameter [mm] - 1 - Weight [g] - 1 - Weight [lb(s - 0,0022 01860202 Diameter [mm] - 2 - Weight [g] ...
Thread pitch - Fixing thread: M1,6 01866014 Diameter [mm] - 0,8 - Weight [g] - 1 - Weight [lb(s - 0,0022 01866003 Diameter [mm] - 2 - Weight [g] - 1 - Weight [lb(s - 0,0022 01866021 Diameter [mm] - 3 - Weight [g] ...
Thread pitch - Fixing thread: M1,6 01866010 Dimensions - 13,40 - Dimensions - .52 - Diameter [mm] - 0,8 - Diameter [in] - 0.03 - Weight [g] - 1 - Weight [lb(s - 0,0022 01866007 Dimensions - 13,40 - Dimensions - .52 ...
• With interchangeable inserts made of wear-resistant tool steel for maximum flexibility. • Assortment with different inserts. • Body hardened and ground • Inserts through-hardened ...
FTC-Rivsert Steel h.12,0 gr1,0-3,0 DH M10/030 T16 Steel. Open cylindrical shank. Dome head.
ITCA4-Rivsert Stainless steel A4 h.7,0 gr0,5-3,0 D M5/030 A4 stainless steel. Open cylindrical shank. Dome head.
Application: The thick film-supported CVD Diamond can be used in machine cutters, diamond dressers, diamond wire drawing die blanks, electronic components heat spreaders and other fields. Description: Being the largest manufacturer in ...
... BLIND THREADED TUBULAR RIVET NUT WITH FLUSH HEAD AND HEXAGONAL SHANK Family Deformation Threaded Insert Type of product Deformation Threaded Insert Receiving material Composites, Copper, ...
Specialinsert s.r.l.
... BLIND THREADED TUBULAR RIVET NUT WITH ROUND HEAD AND HEXAGONAL SHANK Family Deformation Threaded Insert Type of product Deformation Threaded Insert Receiving material Composites, Copper, Stainless ...
Specialinsert s.r.l.
... - THREADED TUBULAR RIVET NUT WITH FLUSH HEAD AND HEXAGONAL SHANK Family Deformation Threaded Inserts Type of product Deformation Threaded Insert Receiving material Composites, Copper, Stainless ...
Specialinsert s.r.l.
... threading. No special technique is required for insertion. Mounting is even easier than with coil-type inserts. Use the dedicated tool SKK. Coil-type inserts and special surface treatment specifications ...
... kinds of tubular applications, available to fit both Round & Square tubular sections. Removing the need for pairing a threaded insert with an adjustable foot, these products feature an height adjusting base which can ...
... stock these Heavy Duty Threaded Tube Inserts in many different diameters and thread sizes as seen below, this ensures the best possible fit to your equipment or machinery. Why Choose Us For Heavy Duty Tube Inserts? Manufactured ...
Screw bushing system for cam covers, oil pans and other automotive plastic components Carbon & stainless steel, brass and aluminum Zn, ZnNi, Geomet
Threaded inserts for screwing in Self-tapping thread inserts can be used in a wide range of materials - in plastics as well as metals. To do this, a hole is drilled in the material and the thread insert ...
... Threaded Insert for press-fitting MGT-M..-BU(KK)PSO-"L "MS Threaded Insert for press-in with knurl MGT-M..BU(KK)PK-"L "MS Threaded Insert for press-fit with curved knurl shape ...
Threaded inserts for insertion The inserts are inserted into the mold and overmolded during the molding process. The closed inserts prevent the plastic from penetrating the thread. When ...
External diameter: 27 mm
Length: 25 mm
NOX INSERT FOR VAG SW.17 SENSOR Necessary to remove the temperature sensor without damaging it. It can be used only after having removed the toothed belt cover. Timing belt replacement only every 210TKm but attention: ...
... : PA6 – Polyamide glass reinforced Insert: Brass insert Threaded bushings for square tube Square threaded tube inserts in reinforced polyamide are designed to be used on square hollow ...
Body: PA6 – Polyamide glass reinforced Insert: Brass insert Threaded bushings for round tube Round threaded tube inserts in reinforced polyamide are designed to be used on round ...
Internal diameter: 6 mm - 20 mm
External diameter: 12 mm - 28 mm
Length: 12 mm - 25 mm
... , different supports, work-piece stops, screws and bolts, or washer and spacers are complementing our program. Threaded insert, Heat treated Manufacturer LEAVE
... of the screw expands the insert giving a self-locking action Typical Applications: Threaded inserts are available in various materials and finishes and metric course threads to suit every application. ...
... stabilisation of the LOKRING connection under mechanical loads. Supports calibration of coiled tube. IMPORTANT: Stabilisation inserts must not be used within an NRA adaptor or within the stainless steel tube of ...
VULKAN LOKRING Rohrverbindungen GmbH & CO. KG
... connection when fitting pipework into a John Guest fitting for potable liquid or hot water applications John Guest pipe inserts play a vital role in providing extra support to pipework, ensuring that the ends of the ...
Flat head design for high load applications. Semihex body for improved torque-out resistance. Standard material: Low Carbon Steel. Materials available on special order: 300 Series Stainless Steel, Alloy No. 260 Brass, 6053-T4 or 6061-T4 Aluminum.
PENN Engineering
The thread inserts in the CLAV-SERT product series are composed of one-piece bushes of a rigid design and come with two or four locking keys, depending on the diameter of the inset. In addition to this, the fitting ...
AMECA
... existing insert or create a custom design specifically for your application. And you’ll be surprised how quickly we get back to you. Get in touch with us for custom threaded inserts for plastics, brass ...
Replaceable Grippers The Jergens Replaceable Grippers are available in Hardened High Speed Tool Steel or with Carbide Inserts. The points of the grippers embed themselves into the work piece giving greater holding power ...
Jergens, Inc.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining