- Materials - Tools - Components >
- Standard Mechanical Component >
- Other attachment devices
Other attachment devices
- 398 mm short depth 2U rackmount chassis - Supports ATX and mATX form factor motherboard - Dual front USB 3.0 - Support 350W 80 plus single flex ATX power supply or 500W 2U redundant power supply - Front-accessible ...
ADVANTECH
- All I/O ports, buttons, LEDs, drive bays, AC inlet located on the front side - Supports ATX/Micro ATX MB with CPU TDP up to 120W - Built-in 500W single or redundant power supply - 350mm short depth - Optional module ...
ADVANTECH
- Supports a PICMG backplane with up to 15 slots or an ATX/Micro-ATX motherboard - Shock-resistant disk drive bay holds four hot-swap 3.5" and 2.5" SAS/SATA disk trays, one slim optical disk drive, and one 2.5" internal drive - ...
ADVANTECH
Fasten and decouple SNAPLOC® joins without transmitting vibrations or noise. The two-piece SNAPLOC® fastening system consists of a ball stud and a coupling for quick assembly and is based on the principle of a simple snap connection ...
BÖLLHOFF
Tolerance compensation – production efficiency The use of FLEXITOL® systems permits greater manufacturing tolerances, thereby allowing for more effective production methods. FLEXITOL® tolerance compensation systems were developed ...
BÖLLHOFF
Our QUICKLOC® clamping, rotation and pressure locks create repeatedly releasable joints. Easy to fit and even easier to operate –the right quick-release system also allows repeated opening and closing. QUICKLOC® is the perfect solution ...
BÖLLHOFF
ONSERT® allows the adhesive bonding of various fasteners to a wide range of materials. As a specialist in mechanical joining systems, we have developed together with DELO, the expert in intelligent adhesive technology, a new fastening ...
SNAPLOC® joins without transmitting vibrations or noise. The two-piece SNAPLOC® fastening system consists of a ball stud and a coupling for quick assembly and is based on the principle of a simple snap connection or plug-in connection.
Our QUICKLOC® clamping, rotation and pressure locks create repeatedly releasable joints. Easy to fit and even easier to operate –the right quick-release system also allows repeated opening and closing. QUICKLOC® is the ...
Made from Nylon. Turn the Quarter Turn Fastener to both lock and release fastener. Supplied in a pre-assembled format for added convenience. Ideal for when it is impossible to fit a receptacle in the frame work. Anchor Length - 11.0 ...
Essentra Components
RS PRO offers this great connector bracket and joint angle to fit 40 x 40 x 40 mm strut profiles with a groove size of 8 mm. These connecting sets provide the angle bracket to secure structural profiles along with a decorative cap. The ...
RS PRO
LUBRIKUP® composition rings are precision ground and swell to ensure uniform bearing contact in the barrel tube, providing long-lasting performance and value. Style 1773 Resistoil is our premium grade composition ring made from 5 plies ...
The Intel® Server Board S2600BP product family is a purpose built, rack-optimized server board ideal for use in hyper-converged, data analytics, storage, cloud, and high performance computing applications. Designed to support the 2nd ...
Standard chassis, It can be installed in the computer room rack for unified management and maintenance Modular power design, easy to maintain. High shielding prevents electromagnetic signals of the power supply from interfering with ...
DescriptionMaterial:GJL 250 annealed.On request:Other slot widths.Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
norelem - Éléments standard mécaniques
Angle bracket for magnetic lock Material: Steel. Version: galvanized. Note: These angle brackets enable the magnetic catch to be flexibly positioned.
norelem - Éléments standard mécaniques
Locating pins with ball-end, Form B Material: Tool steel or stainless steel 1.4305. Version: Steel hardened and ground. Stainless steel ground and kolsterised. Note: Ball end locating pins are specially designed to ease the locating ...
norelem - Éléments standard mécaniques
AirLoc HZA horizontal supports are an important part of a complete AirLoc machine setup system. The delivery provides you with all required components including complete fixing materials. The threaded spindle with lock nut ensures precision ...
AirLoc AG
AirLoc HZA horizontal supports are an important part of a complete AirLoc machine setup system. The delivery provides you with all required components including complete fixing materials. The threaded spindle with lock nut ensures precision ...
AirLoc AG
AirLoc HZA horizontal supports are an important part of a complete AirLoc machine setup system. The delivery provides you with all required components including complete fixing materials. The threaded spindle with lock nut ensures precision ...
AirLoc AG
The DA 084 is a vent cable gland that is specifically designed to provide a protective housing for critical electrical and electronic components. It is constructed in a securely closed housing built according to Ingress Protection class ...
STEGO
Cable diameter: 16.3, 12.3, 20.3 mm
Thread diameter: 18 mm - 26 mm
Operating temperature: -20 °C - 80 °C
Cable gland with integrated ventilation High degree of protection Easy to install Integrated strain relief Waterproof filter Large clamping range Pressure differentials in enclosures with a high degree of protection are a result of internal ...
STEGO
Passive pressure compensation device for enclosures and control cabinets. Evens out temperature-induced pressure differences between the inside and outside of the cabinet. Humidity escapes through a watertight membrane. Condensation is ...
STEGO
For the connection of small flanges (ISO-KF) clamping rings or clamping collars are used. Clamping rings can be mounted easily without the use of a tool.
Diameter: 4 mm - 16 mm
Length: 8 mm - 80 mm
Wing screws DIN 316 | Malleable cast iron head with steel shank Radiuses acc. to DIN 316, i.e. ergonomic wings, no sharp edges Complete range M4x8 – M16x60 available while stocks last On request: Special lengths up ...
BTS Befestigungselemente-Technik GmbH
Diameter: 4 mm - 12 mm
Length: 8 mm - 60 mm
Wing screws DIN 316 | Cast brass version Radiuses acc. to DIN 316, i.e. ergonomic wings, no sharp edges Complete range M4x8 – M12x60 available while stocks last One-piece cast model
BTS Befestigungselemente-Technik GmbH
Wing screws American form | Cold-formed From M3x6 – M12x60 available while stocks last On request: Special lengths and individual thread ends With flange beneath wing head, also available without flange on request Packaging:: Standard ...
BTS Befestigungselemente-Technik GmbH
Threaded Rod for Swivel Feet, Ball Joint 10 Steel Description Threaded rod for swiveling levelilng feet, ball joint 10 Material Zinc plated steel Ball joint Swiveling range ±10° Pack Quantity 10 pieces Specials Stainless steel, other ...
FATH GmbH
Diameter: 8 mm
Model: Steel Description: Threaded rod for swiveling levelling feet ball joint 10 Ball Joint: Swiveling range ±10° Specials: Stainless steel, other lenghts and other sizes on request Material: Steel Surface: Zinc plated
FATH GmbH
T-Slot Nuts and Rhombus T-Slot Nuts for Aluminum Profiles for groove width: 5 - 6 - 6,5 - 8 - 10 - 11 - 12 different designs possible: - single, double - retractable, swiveling - with/without thread - ESD-capable different ...
FATH GmbH
The fischer metal cavity fixing HM is a flexible cavity fixing with metric screw for all panel building materials with a wall thickness of 3 to 50 mm. The plug is set in the pre-positioned installation using the installation pliers fischer ...
Artur Fischer
The fischer rebar anchor FRA is a concrete steel bar with a friction-welded threaded part made from stainless steel. Due to the high load-bearing capacity of the concrete, extremely high tensile loads can be introduced into the base material. ...
Artur Fischer
The fischer bolt anchor FAZ II Plus GS with its large washer is the ideal bolt anchor for the highest requirements. With the steel anchor made from zinc-plated and stainless steel, heavy loads are secured in cracked and non-cracked concrete. ...
Artur Fischer
The most comprehensive way to connect tubes – the Tube Connecting System The tube connecting system was the father to the thought “Connect without drilling and welding”. For more than 30 years, the system has continuously been extended ...
THREADED STIRRUP FOR ISO PIPE - STAINLESS STEEL A2 - A4
BENE INOX
Diameter: 14 mm - 219 mm
LIGHT DUTY ROUND PIPE HOLDER WITH RUBBER PROTECTION - STAINLESS STEEL 316 - GALVANIZED STEEL
BENE INOX
Diameter: 25 mm - 104 mm
HINGED HEXAGONAL PIPE HOLDER WITH ROD - STAINLESS STEEL 304
BENE INOX
OU 20/60-Brass eyelet 2,0x6,0 Brass unified eyelets with pass through hole.
RIVIT
Chocolate brown (RAL8017) nylon plug. Copper plated stainless steel screw.
RIVIT
RIVIT
We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum ...
We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum ...
We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum ...
19-inch chassis for rackmount use 18 slots for high density applications Supports dual power input with redundancy Fanless chassis design reduces servicing costs SNMP/web console for easy management TRC-2190 media converter for passenger ...
Features: RECTANGULAR, FIX STEM • Galvanized steel base (C40). Fixed galvanized steel screw. The leveling element could be supplied, on request, with steel nut. • Load values above mentioned have to be considered referring to static ...
The brass angle saddle allows offset fixing of the pointed air rod. It also allows for either a round or a flat conductor to be
Indelec
This kit provides all the necessary parts for attaching guy wires to an Indelec 4-section pole.
Indelec
Used to fix a pole on any vertical tubular support (e.g. pole, railings etc.). 2 models with different offsets are
Indelec
The NEFF screw jack accessory range offers an extensive range of accessories for all common accessory parts of a screw jack, from precise pivot bearings to the appropriate grease dispenser. If desired we manufacture tailor-made solutions ...
The NEFF screw jack accessory range offers an extensive range of accessories for all common accessory parts of a screw jack, from precise pivot bearings to the appropriate grease dispenser. If desired we manufacture tailor-made solutions ...
The NEFF screw jack accessory range offers an extensive range of accessories for all common accessory parts of a screw jack, from precise pivot bearings to the appropriate grease dispenser. If desired we manufacture tailor-made solutions ...
The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.
MayTec
The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.
MayTec
The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.
MayTec
Perpendicularity: 0.01/200 mm Material: aluminum casting Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with clamping and base surface Base surface: with hole pattern according to table or drawing, suitable ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Clamping thread (M): M12 Grid pitch (R): 40 mm ± 0.01 mm Grid hole (D): Ø 16F7 Grid hole (E): 12 mm Perpendicularity: 0.01/200 mm Clamping surface face: smoothed after nitration Hardness: 700-100 HV1 Material: case-hardened steel Alignment ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Parallelism: 0.01/200 mm Clamping surface faces: finely milled or smoothed Hardness: unhardened Material: case-hardened steel Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with base surface Base surface ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining