Rotary seals and shaft seals

72 companies | 429 products
Filters
  • What’s new?

The chasing sealing system has developed its sealing components for the drive shaft designed with thermoplastic...

{{productDetail[7393]}}

The SKF radial shaft seals feature two key components: a cylindrical shell made out of sheet steel or elastomer and the elsatomer (or thermoplastic) sealing lip. These seals are normally found between...

The SKF V-ring seals represent a range of axial shaft seals that can be used in a...

The SKF range of sealing and spacing washers is composed out of Z type sealing and ZW...

The basic demand on piston seals as well as on rod seals for hydraulic cylinders under the operating conditions for which they have been chosen, is to maintain a high level of sealing performance during their service life. The overall demands on both these function-determining main seals in the hydraulic cylinder are meanwhile very different in many respects....

The rod seal is the seal in the hydraulic cylinder with the most demanding requirement specifications. In addition to normal wear and aging, this...

{{productDetail[5564]}}
rotating shaft seal - -40 °C ... +120 °C

This rotary seal features a high-carbon steel stiffening sheet and NBR outer casing and sealing lip (70.445-04). Its...

rotating shaft seal - -40 °C ... +120 °C | 11.5010.1111

The 11.5010.1111 model of dummy radial-shaft seals from APOsparts are manufactured primarily for applications involving the sealing-off of mineral oils and fats. These...

rotating shaft seal - -40 °C ... +120 °C | 11.5010.1112

This rotary shaft seal form B NBR from APSOparts is a dummy radial-shaft seal which has a good sealing effect against mineral oils and...

rotating shaft seal - -40 °C ... +120 °C | 11.5010.1113

This rotary shaft seal form BS NBR from APSOparts is a dummy radial-shaft seal specifically used on mineral, oils, and fats applications....

{{productDetail[5082]}}
rotating shaft seal - max. 500 °F | 8091

Garlock 8091 Hydra-Just® Rotary Seal is uniquely engineered to replace mechnical seals in industrial pumping operations. This assures a non-leak and dillution free operation. It also renders an outage-to-outage service in slurry applications.

The...

U seal / ring lip - max. 180 °F | 9220 GARTHANE®

Benefits

* Increased seal life and performances
* Less equipment downtime
* Fewer sizes save inventory expense
...

ring lip seal - max. 0.4 bar (7 psi) | 113

The Garlock Model 113 is a high performance external lip seal with an assembled...

rotating shaft seal - max. 26.7 bar (400 psi), max. 204 °C (400 °F) | Type 80

The Type 80, which is manufactured by Garlock, is a balanced rotary component seal that...

{{productDetail[5615]}}
expanded graphite packing sealing ring - max. 600 °C, 160 - 250 bar | LATTYgraf BA

The LATTYgraf BA features expanded graphite rings for autoclave valves, handholes, mechanical...

expanded graphite packing sealing ring - max. 3000 °C | LATTYgraf E series

The LATTYgraf E2P is a High Purity Expanded Graphite that is specifically used in the nuclear...

expanded graphite packing sealing ring - -200 °C ... +600 °C, max. 2000 bar | LATTYgraf EF NG

These all new rings feature 99.5% graphite and have been produced by LATTY’s...

{{productDetail[8103]}}
{{productDetail[32592]}}
ring lip seal - ø 1 - 1500 mm (0.04 - 60

OmniSeal® RacoTM is an efficient, sturdy and heavy duty seal that is energized through a high spring load and remains in contact throughout the length of seal. This high-performance seal is capable...

rotating shaft seal - max. 3.5 MPa | OmniLip™ series

A wide selection of metal-cased lip seals such as the OmniLip PTFE rotary shift models are offered by Saint-Gobain Performance Plastics...

ring lip seal / PTFE / for rotating shaft - max. 3.5 MPa | Dynalip® series

Saint-Gobain High Performance Seals has a complete line of polymer-based Dynalip® seals with many PTFE and PTFE blended...

{{productDetail[17912]}}
ring lip seal / PTFE / for rotating shaft - max. 3.5 MPa | Dynalip® series

These spring powered seals are designed with a narrow, flexible PTFE sealing jacket strengthened through a corrode-resistant stainless steel spring, which puts a load to the sealing...

{{productDetail[28310]}}
piston seal / double-acting - ø 47.42 - 405.75 mm, 35 MPa (5076 psi) | Turcon® AQ Seal® 5

Trelleborg Turcon® AQ Seal® 5 is one of latest innovation with high quality standards....

rod seal / piston / double-acting - ø 1.93 - 405.75 mm, 41.4 MPa (6004 psi) | Turcon® CX(D)

The CX (D) by Turcon is a double-acting sealing system known for combining a machined elastomer energizer with a low friction sealing element by Turcon. The item has been manufactured...

rod seal / ring lip - ø 1.93 - 405.75 mm, 41.4 MPa (6004 psi) | Turcon® CX(S)

This single-acting sealing system designed by Turcon impresses through a combination of a stepped elastomer energizer with a low friction sealing element. In addition to this,...

double-acting seal - ø 1.93 - 405.75 mm, 41.4 MPa | Turcon® Double Delta® II

The first aspect that users will notice about this product is the original seal design, which ensures great performance improvement of the back-up ring...

rod seal / piston / T - ø 1.93 - 405.75 mm, 35 MPa (5076 psi) | Turcon® T-Seal

The Turcon® T-Seal from Trelleborg is an aircraft seal with MIL grooves typically used on strenuous aircraft applications that require zero leakage,...

{{productDetail[4774]}}
rod seal / piston / T - ø 1.93 - 405.75 mm, 35 MPa (5076 psi) | Turcon® T-Seal

There are various important properties that apply to the design of this impressive item. First of all, the...

{{productDetail[14764]}}
bearing protection seal - -30 °C ... +200 °C, 0.2 - 1 barg | 83 series

Type 83 is a carbon-bushing assembly, dual-segmented, which the manufacturer has designed to prevent bearing oil...

{{productDetail[14142]}}
{{productDetail[26649]}}
bearing protection seal - -30 °C ... +200 °C, 0.2 - 1 barg | 83 series

PTFE Lip Seal Design Guide offers comprehensive information on spring-energized PTFE lip seals that include:...

bearing protection seal - -30 °C ... +200 °C, 0.2 - 1 barg | 83 series

The Rotary Seal Design Guide is a literature that contains detailed descriptions and...

bearing protection seal - -30 °C ... +200 °C, 0.2 - 1 barg | 83 series

The packing products include lip seals made...

{{productDetail[14828]}}
rotating shaft seal - max. 80 °C, max. 0.05 MPa | COMBI series

Simrit's Simmerring Combi-Seals have been engineered deliver effective contaminant protection....

rotating shaft seal - max. 80 °C, max. 0.05 MPa | SF19

The Simmerrings from Simrit is highly resistant to dirt that commonly comes from...

rotating shaft seal - max. 80 °C, max. 0.05 MPa | SF5

The Shimmering and Radial Shaft Seals are highly ideal for resistance against sludge...

rotating shaft seal - max. 100 °C, max. 0.05 MPa | SF6 series

The Simrit Simmering Combi Seals are designed to deliver efficiency and reliability for various...

rotating shaft seal - max. 80 °C, max. 0.05 MPa | SF8

The seal for rotating shaft is created with maximum resistance and protection...

{{productDetail[26637]}}
liquid-tight sealing washer - max. 257 °F | SW series

For use with Heyco-Flex fittings.
Liquid tight, dust tight, and oil tight at enclosure.
Suitable...

{{productDetail[11746]}}
sealing ring - ø 15 - 62 mm | JVRU, JTRU series

The JVRU, JTRU Series, manufactured by FG Inox, and is a sealing that is...

{{productDetail[7801]}}
sealing ring - ø 15 - 62 mm | JVRU, JTRU series

Mink AD-System (AD) – the innovative solution for sealing shafts

The Mink AD-System consists of a specially designed brush ring to seal shafts and to prevent coolants, swarf and mists from escaping....

{{productDetail[14806]}}
sealing ring - ø 15 - 62 mm | JVRU, JTRU series

Only available for FLADDER® 150/MICRO

Inside diameter/thickness:
50/8.

The...

{{productDetail[26744]}}
tree seal - VI series

The seal usually employed in a stationery manner, i.e. with a rotating shaft. Care should be taken...

tree seal - VA series

At low peripheralspeeds and very good – if possible, lapped – mating surfaces, it can also be used with liquids.
This...

tree seal - DI series

Axial shaft seal with internal sealing lip, for use with liquids under high pressure....

{{productDetail[16419]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation