|
|
Symbol LS7708 General Purpose Presentation Scanner
As every retailer knows, time is money, especially at customer check-out. The Symbol LS7708 horizontal presentation scanner provides quick, accurate scanning with minimum effort and maximum productivity.
Available for presentation and swipe scanning, the Symbol LS7708 combines the ease of hands-free and the versatility of handheld scanning. Its easy-to-use design, large scanning window and intuitive operation make check-out faster and more efficient, allowing employees to focus on customer service. Designed to stand up to the toughest and busiest environments, the Symbol LS7708 provides a cost-effective solution for medium- to high-volume retailers. |
|
| Barcodes and data matrix code are pure fixed code systems. The code is applied to a label (e.g., in the form of a bar code or a 2D matrix code). These labels are scanned / recorded optically according to the reflection principle. The code is then read based on the sequential differences in intensity. Barcodes are read using scanning equipment (laser scanners or CCD technology) and matrix codes using an image recognition process with a camera. Both optical code types can be created with commercially-available printers and are therefore unbeatably inexpensive. |
|
Sensors for reading 1D and 2D codes
Independent of the orientation and the number of codes, the high-performance algorithms automatically decode 1D or 2D codes. An optimisation mode allows additional settings to ensure reliable identification of each code. Automatic setting of the exposure time: The sensor characteristics and the segmented lighting can be adapted so that optimum results are achieved even with highly reflective metal surfaces. Complex application programming is no longer necessary due to code identification and comparison in the sensor. |
|
ICR890 Image Code Reader:
high-end CCD camera system
for 1D and 2D codes
- Line camera system with LED illumination and
high-performance decoder
- Real-time image output via Gigabit Ethernet interface
- Integrated image processing for OCR and
video coding applications
- 19 kHz scanning frequency for reliable identification
of codes, even at high transport speeds
- Simple installation and commissioning
For identification tasks at parcel services, mail order
houses, food wholesalers and in the automotive industry |
|
| Cognex ID Products are focussed on solving the most difficult to read Direct Part Marked (DPM) 2D codes. Whether the code is marked on an engine component, a jet engine, a medical instrument, a healthcare product or an electronic pcb, the ID Products range are targeted at reading the code, first time, every time. Cognex ID Products take pride in being the industry and technology leader in the challenging world of ID Direct Part Marking. |
|
DataMan 100, the world's smallest high-performance ID reader, reads everything from simple bar codes to challenging DPM marks with ease!
Cognex DataMan image-based ID readers represent a breakthrough in combining unmatched code reading performance, ease of use, and an extremely small size. Lighting, camera, processor, and communications are all integrated into an exceptionally small industrial housing, making DataMan 100 ID readers ideal for the most challenging applications.
|
|
VB34-2500 Barcode reader
Optimised for the requirements of the automobile industry
Dynamic focusing system
Fast Lonworks interface for master/slave configurations
Display and keypad for parameter settings
General specifications:
Scan rate 600 ... 1200 s-1 , programmable
Reading distance: 500 ... 2500 mm
Light type: semi-conductor laser 655 nm
Resolution max: 0.2 mm ( 8 mils )
Indicators/operating means: Data flow display LED green flashing: Data transfer carried out (TX-DATA)
Electrical specifications: Operating voltage 15 ... 30 V DC
Interface: Interface type serial , RS 232 and RS 485 up to 115.2 kBit/s
Protection degree: IP64
Connection Interface: (primary, secondary) : 25-pin Sub-D socket , Lonworks: : Sub-D socket, 9-pin , 9-pin Sub-D connector
|
|
Features of the 6200 Closed Loop Galvanometer Family
Highest Galvo Speeds and Step Response Times: The 6200H series' positioning speed comes from advanced galvanometer and new actuator design for the highest system resonant frequency and RMS power capability. The newest design of the actuator features extremely high torque along with very little electrical inductance, thus providing high scanner speeds at reduced power supply voltages. These characteristics combine to produce superior system bandwidths, the fastest step response times and the highest repetition rates with excellent wobble and jitter performance.
Maintaining Position Accuracy and Repeatability at High Speeds: CTI's newest innovation in position accuracy is the advanced optical position detector, which was designed to provide high positioning repeatability, linearity and stability over time and temperature while operating at high speeds.
High System Performance and Reliability Over Time: Superior product lifetime and reliability result from disciplined design technique, the best in bearing technology and quality manufacturing processes and workmanship. Our scanner designs are computer modeled and have been life-test proven to billions of cycles of operation. CTI's high standards of manufacturing quality guarantees the performance consistency that you need to design the high quality systems demanded in today's competitive marketplace.
|
|
Nutfield Technology's QuantumScan-30 (QS-30) galvanometer scanners are used to position laser beams fast and accurately over millions of cycles. The limited rotation moving magnet motor is coupled to a highly sensitive position detector. The device is controlled through a PID based servo driver to provide amazingly fast and accurate closed loop control.
NTI's engineers are veterans of the scanning industry and have been designing galvos for two decades. They have been continuously researching ways to improve scanner performance, which has lead to several patents and patent pending designs including our exclusive ceramic rotor designs. This first of a kind rotor has exceptionally low inertia and high stiffness, which results in higher bandwidth performance. The QS-30 uses high quality bearings with tested and patent pending bearing preload designs to ensure a long lifetime of operation.
The QS-30 Position Detector was designed close to the mirror for the best possible accuracy. Further position detector refinements give the QS-30 galvanometer up to 10 times greater signal-to-noise; the highest in the industry. This means greater pointing accuracy and repeatability in your application. |
|
Most aggressive handled imager available for decoding symbols on low contrast substrates such as metal, plastic, rubber, and glass. It is optimized to read both linear and 2D symbols that use direct part mark (DPM) methods such as dot peen and laser/chemical etch.
With custom optics and advanced decode algorithms, the MS-Q Quadrus provides the decoding power of a smart camera into a powerful handled device.
- Optimized resolution
- User-friendly design
- Aggressive decoding
- Security option |
|
Intermec's family of handheld scanners addresses the needs of users in virtually every scanning environment. From handheld scanners or decoders to integrated scan engines, Intermec has the right scanner for any application.
Light Industrial:
The convenience of scanning automation, with features you need, at the right price.
Rugged:
Feature-rich scanning for your heavy duty industrial environments. |
|
MS-Q Quadrus® Handled Imager
The MS-Q Quadrus Imagers are optimized to read bar codes and 2D symbols that use direct part mark (DPM) methods. It is the most aggressive handled imager available for decoding symbols on low contrast substrates such as metal, plastic, rubber, and glass with marking methods such as dot peen and laser/chemical etch.
Optical Options:
- The high resolution version is custom designed to optimize resolution for reading small 2D symbols in direct part mark applications
- The standard resolution version is suitable for reading all printed bar code methods plus many applications with direct marked symbols.
Applications:
Automotive, aerospace and the defense industries are actively tracing all parts with bar codes or 2D symbols. The most common practices are to permanently imprint a Data Matrix or bar code symbols directly into the metal component surfaces.
System Integration:
All MS-Q imagers are available in 3 configurations options that provide effortless connectivity:
Batch: A wireless way to collect thousands of decoded symbols for later download, capable of performing from a single charge and buffer a minimum of 1MB of data in non-volatile memory.
Cabled: Cabled units can be connected two ways: USB and RS-232
Bluetooth: Wireless data transmission using Bluetooth%u2122 class 1 radio with a 328' (100 m) operation range.
Symbologies:
- Data Matrix (ECC 0-200)
- RSS Family
- PDF417
- Standard linear bar codes |
|
Portable Hand Held Scanners for the identification of barcodes are used especially where objects or products are handled manually while becoming identified.
Of course the Hand Held Scanners of SICK are equipped with different interfaces to connect the scanners with various peripheral devices such as PC Computers, Terminals, EDP Systems, mobile
data collection terminals or point of sales cash registers.
SICK is offering appropriate Hand Held Barcode Scanners for the identification of linear or stacked barcodes as well as for the increasing use of the innovative Matrix Code.
|
|
Scanner CCD
The CCD Barcode Scanner is a reliable, low cost bar code reader suitable for a wide range of environments. Its features and price make it a good solution for retail, medical and light industrial applications. The powerful built-in decoder reads and discriminates all major symbologies, reducing processing time and labor costs, while increasing accuracy.
The decoder also allows editing and modifying scanned data before sending it to the host device. Barcode menus provide extensive configuration options. Its ergonomic gun action design fits comfortably into the operators hand. |
|
CribMaster Mobile PC's / Bar-Code Scanners
CribMaster Mobile PC's / bar-code scanners come complete with both CM Radio and CM Scan software licenses and a support agreement which means a replacement is provided if repairs are needed. Other accessories are provided depending on the scanner you choose. These scanners are the most durable scanners available and are perfect for most industrial applications. These scanners are available with and without a pistol grip and allow CribMaster users to:
Bar Code or Key Enter Data
Issue and Receive Items
Return Used Items
Cycle Count
Quantity Adjustments
Assemble Kits
Replenish Kits
Transfer
Relocate
Log labor time against work orders
Communicate Real Time with CribMaster
Communicate in Batch Mode
Expand Coverage and Range as Needed |
|
Give your customers the power of mobile shopping
Symbol's "shopping buddy", the CS1504 is a portable scanner that allows customers to buy your products while they're on the go.
Additional benefits:
Fits in a pocket or purse, or can be attached to a keychain
Lets shoppers scan for further information on price, availability, features, rebates, special offers or similar products
Outside the store, customers can use the device to scan embedded information in your advertisements and catalogs, create shopping lists, purchase items or link to the Web for more information.
CS 1504 Consumer Memory Scanner
Shop Anytime, Anywhere with the CS 1504
While Web access has given customers the freedom to shop anytime, the CS 1504 Consumer Memory Scanner from Symbol Technologies gives them true mobility to shop anywhere. Another breakthrough in consumer bar code scanning technology from Symbol, the CS 1504 Consumer Memory Scanner enables customers to capture bar codes on retail merchandise in order to create a shopping list, purchase an item or simply link to the Web for further content about the item of interest. |
|
|
|
Code readers, Bar codes
