|
|
FCB 175/300/400 FF
The packaging machines for bags from flat foil
The modular structure is in such a way conceived that FCB 175/300/400 FF can be used and integrated of condition alone packaging mA schine up to the fully automatic Verpackungsanla ge.
Interfaces for the external administration of the machine and marking data as well as host binding are naturally present.
System of characteristics
- Polyethylene flat foil
- Flexible building method in profile technology
- Filling tubing quick change system
- Low-maintenance |
|
Filling of milk, dairy products, drinks and soups
in bottles with uncontrolled contamination
Container:
Open neck
contamination non-controlled
Capping:
Screw capping
or heat sealing
Product:
pH > 4,5 |
|
Introduction OMVE Asepto-Fill®
The OMVE Asepto-Fill FS range enables small scale production to produce packaged samples aseptically, at a fraction of the cost and time compared to industrial aseptic filling systems.
The OMVE Asepto-Fill includes all equipment and a detailed step-by-step methodology to assist the operators in filling sterilised containers. The process is overseen by a PLC (programmable logic controller) and operated by a touch-screen interface. This not only guides the operator through the vital cleaning and sterilisation activities, but also ensures that positive responses are obtained at each stage of the process, ensuring the effectiveness of the aseptic filling operation.
Since many of the operations are under manual control, the OMVE Asepto-Fill is ideal for R&D departments and pilot plants applications. This unique equipment is flexible in operation, easy to use and assures the highest hygienic conditions during operation.
The Asepto-Fill is unmatchable by other filling systems in the market.
Features
- Aseptic filling when linked to a suitable UHT processing system.
- The filling chamber is isolated with a small over-pressure
- Complete step-by-step instructions to ensure hygienic standards are maintained
- User controlled operation with PLC supervision
- Caters for a wide range of containers and sealing devices.
- Filling at low oxygen level
- Handles flow rates from 10 to 100 l/hr
- Integrated automation and controls
- No chemical sterilisation of packaging |
|
| We work closely with our sister companys Inno-Tech and Prewa to supply you with complete turn-key solutions. Prins can offer superior quality baggers from Inno-Tech and lower budget machines from Prewa. |
|
| Particularly selected for certain filling materials owing to flow-mechanical properties, valve-sack filling-machines are manufactured by Möllers in further worldwide proven configurations. The machines, constructed as single packers, are used to achieve higher filling capacities but also in in-line configurations with a common filling material feed and empty-sack feed via a common sack applicator. |
|
The PACK 50 is the ideal packer for anyone wishing to achieve medium outputs.
The machine can reach a maximum packing speed of 48 bags per minute and with the additional size changeover parts, bag sizes from 500 grams to 2.5 kg (depending on product bulk density) can be packed.
The machine can be fitted with either the auger doser model DVC (for powder products), and/or the cups doser model DVT (for granular products), or with an electronic weigher for handling special products
|
|
All the equipement we manufacture is the result of innovative technological processes developed over 20 years. Our adaptability enables us to supply either our standard machinery or bespoke solutions, tailored to specialized processes or customers.
Depending upon your production requirements and product specification, we offer a comprehensive range of equipement, include the following :
1. Forming of the pack (bag, box, bag-in-box, ...)
2. Filling with weight control
3. Vacuum or gas flushing of the pack
4. Heat sealing of the bag
5. carton closure and sealing
6. palletization |
|
Universal Sorting and Equalizing System
The UES is a product routing system as an extension to an automatic price labeler. It intelligently compiles batches, boxes or bags with a standardized fixed weight from a choice of products with weight tolerances. Therefore, the UES helps to optimize product usage of food, non-food, fresh and frozen products. The import of the product weights through a standardized data interface from a price labeler saves an additional weighing process.
- Reduces/saves up to 75% of give away depending on product
- Comes in standard design with 4, 6, 8, 10 or 12 channels, but also various options for special production environments available
- Different designs and constructions of the channels to fit various product classes
- Special design for instant filling of bags or various containers optional, as well as release to transport -belt or -roll systems
- Integration in robot systems possible
- Packing table for outer cases
- Working with labeled and wrapped or foiled products
- Compact and space-saving design
- Easy-use and intuitive 10,4“ TFT colour display with softkey controls
- Clearly arranged display symbols, easy-to-capture production data
- Detailed statistical information and functions, including breaks and downtimes
- Allows for additional processes like sorting, equalizing, calibrating and counting, also in simultaneous mode
„The investment into an equalizing system made instant product savings possible and had a short-term payback time“ |
|
Filling machines for :
- FOOD (Milk, drinking yoghurts, probiotics, vegetable oil, beverages, sauces, ketchup, ...)
- INDUSTRIAL products (Detergents, cleaning products, softeners, agro-chemicals, lubricants, paints, ...)
- BEAUTY & HEALTH (Perfumes, hair care, body care, Facial care, pharmaceutical products) |
|
PneumaticScaleAngelus has a diverse selection of pre-owned filling technologies. Our Pneumaflow and Easi-Flow are ideal for constant level fills while the Accuflow Positive Displacement and Pfaudler Rotary Piston fillers are perfect solutions for volumetric fills. The Liquid and Dry Net Weigh fillers are for those customers who value the highest level of accuracy with minimal product loss. The Mateer Auger fillers are well suited for dry filling applications.
-Widest variety of technology
-Fill speeds and accuracies verified in test lab
-Close-coupling to PSC capper available
-Reliable, minimal-maintenance and highly versatile filling solutions from the industry leader in packaging automation
-Superior customer service and technical support |
|
Basic units to sophisticated systems
Bulk bag filler configurations
Flexicon bulk bag fillers (also known as FIBC fillers) are offered in three configurations, each of which is engineered to deliver optimum performance across specific capacity ranges with maximum cost-effectiveness.
Flexicon's patented TWIN-CENTERPOSTTM filler, satisfies low- to medium-capacity filling requirements and/or sanitary applications where frequent wash-down or compliance with USDA Dairy standards is required.
Flexicon's latest bulk bag filling innovation is the patent-pending SWING-DOWNTM filler. Designed for medium- to high-capacity applications, this revolutionary design brings the fill head to the operator at floor level for faster, safer and easier bag connections.
REAR-POST fillers are intended for medium- to high-capacity applications requiring pass-through conveyors and, or powered fill head height adjustment.
Each of these designs satisfies a distinct range of bulk bag filling applications, and is available with performance enhancements to meet your individual requirements with extreme cost effectiveness. From basic, low-cost fillers to automated, high-capacity systems and everything in between, Flexicon offers precisely what you need for bulk bag filling success.
Basic units to fully automated, high capacity, feeder/filler systems
For fast, accurate, and stable weigh-filling of small to large volumes of free- and non-free-flowing bulk materials, Flexicon bulk bag fillers are offered in two configurations: with load cells which measure weight gain of the bulk bag filler (three photos at right), and with weigh hoppers suspended above the bag filler (illustration at bottom) allowing simultaneous recharging of the hopper and replacement of the bulk bag to achieve high filling rates.
|
|
Metalfab Bulk Bag Filling Stands and Systems are engineered to provide a safe, reliable, and dust free means to fill lined, reusable, and disposable (one way) bags with a wide variety of powders and other difficult to handle dry bulk materials.
The basic cantilever filling stand allows loading from three sides and includes a 60" x 60"diamond plate bag support surface with 5,000 lb. capacity, adjustable bag holding frame fabricated from 3" structural tubing, fixed position bag holding hooks, and frame mounted inflatable bag seal for dust free filling. The main support posts and bag clamp bars are predrilled at 2"intervals to allow adjustment of the frame to accommodate bags from 36-85" in height. All material contact surfaces are 304 stainless steel.
Metalfab can also provide a completely integrated turnkey package inclusive of the stand, a choice of weighing options, feeding systems, cutoff valves, digital control instrumentation for direct connection to a PLC or DCS, and motorized conveyor sections to remove filled bags from the bulk bag or bulk container filling stand. |
|
For bottling machineries and spare parts components .
Orobica Plast-Gom began in 1980 with the production of components and spare parts for bottling machines and it is still growing over the years.
|
|
Thimonnier packages an extensive variety of liquid and viscous or solid products in "pillow" pouches or Doypack® (stand-up pouches), such as:
milk products,
drinking water,
fruit juices,
whipped cream,
stewed fruit, jam, fruit purée,
condiments, olives, pickles,
soups, sauces and ready meals,
sauerkraut,
seafood products: surimi, crab-flavoured fish sticks,
liquid egg,
rice, coffee, cereals,
cooking oil and margarine,
mayonnaise / ketchup,
pet food,
etc...
|
|
Ship container BULK loader type CBL
New unique loader ideal for loading of dry bulk commodities into containers, such as sugar, malt, fish meal, grain or almost any other granular product.
Sturdy screw conveyor with special designed pressure outlet for optimum filling of container liner.
Remote controlled sidewise and vertical movement of outlet.
Easy moveable by e.g. a fork lift truck.
Feeding hopper for connection to a gravity bellow feeder or other customer specific feeding system.
Capacity: one 20 feet container in 20 minutes.
New:
We can now also supply a unique pneumatic container un-loading system.
|
|
Fully Automated Pint Gallon container filling equipment
- In-Line
- Volumetric
- Time/Pressure
- Net-Weight
- Mass-Flow |
|
Open or sealed transfer of solids from drums to process equipment
Flexicon "open-chute" and "lift-and-seal" drum dumper models accommodate all popular drum sizes and are available in carbon steel with durable industrial finishes, or in stainless steel with material contact surfaces finished to industrial, food or pharmaceutical standards. All models can discharge directly into process equipment or into hoppers equipped with outlets for connection to Flexicon flexible screw or pneumatic conveyors, or to other process equipment.
|
|
Fully Automated Drum filling equipment :
- 4 on a pallet Net-Weight
- In-Line Net-Weight with orientation and bung removal |
|
Bagging machines of the Form Fill and Seal type manufacture the bag either from a plastic tubular film with a gusset (FFS) or from a flat film (VFFS).
A range of metering-weighing devices installed upstream prepares the doses before filling (net weight). |
|
SP2
Continuous motion horizontal form-fill and seal machine to flowrap products with coldsealing material taken from reel.
Speed up to 1200 pcs/min.
- "In line" or "90°" version
- Left and right version
- Possibility to connect directly with
- Buffer exit, feeding station from main conveyor and pick-up system
- Maximum flexibility of product handling
- Quick size change over
- Easy accessibility and maintenance |
|
FFS-Filling machines manufacture the sacks from PE-tubular film, fill them and seal them hermetically tight.
Main advantages:
• Sack length according to pack size infinitely adjustable (minimal residual empty space)
• Tubular film in roll form, no additional sack magazine
• Simple machine loading, modest space requirement |
|
| The new series Prins multihead weighing machines are constructed modularly to gain flexibility in hopper size on a single machine. The double door weigh-pans ensure fast and quiet operation while handling your product with the greatest of care. |
|
The Form Fill and Sealing Machine EVX260, is a small/middle format equipment offering a high performance and versatility useful to pack from a few grams up to 2 or 3 kg of product depending on its density.
Features:
Bag width: From 60 to 260 mm
Bag length: From 60 to 500 mm (800 mm in option)
PRODUCTION: 100 bags/min (Depending on the kind of bag)
Wrapping material: Polyethylene and complex
Sheet Pulling: By belts (vacuum optional)
Drive: Pneumatic (Servomotors in option)
Construction: Parts in contact with product in stainless steel (optional the whole machine).
Control: Electronical through microprocessor
MEASURES
Air machine: 30 lits./mm.
Air seailing: 40 lits./mm.
Water (PE only): 80 lits./h.
Energy power: 4 kVA.
HEIGHT: 1.400 mm
WIDTH: 1.285 mm
DEPTH: 1.910 mm
Pillow bag, strings, gusseted bag, display, flat bottom bag, handles, 4 sealing bag, squared, pocket bag with adhesive
Options :
Automatic reel correction, pulling with vacuum, antistatic unit, bottom vibrator, gas injection, vacuum printer, equipment to provide adhesive tape or zipper ...
|
|
Big Bag-filling equipment (Flexible Intermediate Bulk Container, FIBC) is manufactured by Möllers using gross-weight weighing. Octabin-filling machines are offered, with infinite height adjustment, filling lid and suction device.
Peripheral equipment is available for plant automation systems |
|
|
|
Filling machines, Baggers, Box filling machines
