|
|
Better cutting - manual cutting systems
the ergonomically formed cutting carriage with cutter cassette cuts with absolute safety in both directions.
The cutter cassette can be replaced in one easy operation.
cassette with circular knife for paper, corrugated board etc.
cassette with blade for film
for use with roll material, such as paper, corrugated board or foil, we offer you the time-tested cutting systems with dispenser
freestanding or directly at the packing location
with changeable cutting cassette
standard cutting widths up to 160 cm, vertical cutting stand up to 200 cm
|
|
Multipack Machine :
Application:
Compact, fully automatic machine for compression and wrapping of a requested number of packs into multipacks
Compression: 350 kg-1.200 kg (from 2:1 - 4:1)
Capacity: Max 4 Multipacks / min (the equivalent of 12-18 units/min)
Handles rolls and packs
Features:
Fully automatic operation
Designed for continuous production
Easy programming and change to the requested content of a multipack
Accessories:
In- and Outfeed Lines
Palletizing Machines
Pallet Wrapping Machines |
|
STANDARD dispensers - the approved quality
thousandfold approved, sturdy, durable
with smooth tear bar for paper or serrated bar for paper and foil
practical one-handed service
for rolls 30-100 cm wide and up to 22 cm diameter, max. 20 kg
sturdy powder coated profile steel frame either light grey (RAL 7035) or elegant chromium plated
the spring-loaded tear bar is also an effective roller brake
versatile combinations with curling ribbon dispensers for 1-12 reels possible
|
|
Flexible Packaging
These machines are designed to produce DOYPACK® pouches at high-speed, up to 250 pouches/minute, or four-seal bags.
THIMONNIER's Research and Development Department is able to create new forms of packaging.
Special adaptations enable the manufacture of shaped bags for unique packaging solutions.
THIMONNIER bag manufacturing machines have been installed at the major transformers in Europe, the Middle East, Asia and Central America.
THIMONNIER also offers an automatic machine for installing spouts and stoppers on bags and Doypack® pouches (SI 30). |
|
Automatic packing machine
IMB AUT 240, have been projected and built keeping in mind of the various typologies of feeding you roll that are set in the cycles of job.
The versatility of this machine allows him to be set in direct exit to the checker as unity of line to different Checkers or fed by tables of accumulation in automatic.
The machine is managed by PLC and it is able to manage the introduction and clearing you roll in various stations of unloading.
- Structure to closet with integral protection
of the mechanical and electronic parts
- Ample range ø rolls up to ø1000 mm
- Cutter film-fabric with electric blade hidden
- Every type of polythene, both transparent and coloured,
according to optional features, can be used
- Control microprocessor with trouble-shooting feature
- Output capacity up to 60÷100 rolls/h
- Longitudinal Welding by Thermo-fusion
- Edge-Closing by thermo-retraction with hot-air
- Possibility to wind more turns of polyethylene on the roll |
|
Automatic packing machine
IMB AUT 240 COMKPACT, have been projected and built keeping in mind of the various typologies of feeding you roll that are set in the cycles of job.
The versatility of this machine allows him to be set in direct exit to the checker as unity of line to different Checkers or fed by tables of accumulation in automatic.
The machine is managed by PLC and it is able to manage the introduction and clearing you roll in various stations of unloading.
- Structure to closet with integral protection
of the mechanical and electronic parts
- Ample range ø rolls up to ø500 mm
- Cutter film-fabric with electric blade hidden
- Every type of polythene, both transparent and coloured,
according to optional features, can be used
- Control microprocessor with trouble-shooting feature
- Output capacity up to 40÷80 rolls/h
- Longitudinal Welding by Thermo-fusion
- Edge-Closing by thermo-retraction with hot-air
- Possibility to wind more turns of polyethylene on the roll |
|
This is an area in which ABB services a multitude of installations, covering a host of different products, applications and packaging line set-ups.
These include frozen food, bakery and confectionary as well as ice-cream, meat and fish, cheese, pet food, medical products, shampoo and perfume bottles.
Able to achieve a staggering 150 picking cycles per minute, the IRB 340 FlexPicker is our star performer in this area.
For full 6-axis flexibility, less demanding cycle times and payloads of up to 5 kg, we recommend our IRB 140. |
|
The Adept Quattro s650 robot utilizes a patented 4-link parallel drive and carbon fiber construction to provide packaging cycle times which are twice as fast as conventional packaging robots and up to 240 pick-and-place cycles per minute.
The Adept Quattro s650 robot is also the world's first packaging robot to integrate the controls inside the robot virtually eliminating external controls cabinets saving valuable factory floor space and simplifying installation.
Adept's industry leading SmartController platform provides fully integrated vision and conveyor tracking for up to 6 conveyors making the Quattro an ideal solution for high speed packaging applications in which products are randomly located on moving conveyor belts.
The Adept Quattro features over-the-belt mounting, a 1300 mm work envelope and 250 mm Z-stroke along with a wash down option for usage in sensitive manufacturing environments, which require frequent washing to prevent product contamination. |
|
Together with integration partners, FANUC Robotics offers a range of advanced solutions to speed up end of line operations.
With a payload range from 2 to 700kg, you are sure to find the robot model that best suits your needs:
› very high speed M-430iA/2F dedicated to food industry (food grease, up to 120 picks per minute, washable)
› High speed M-6iB series (2-10kg payload) for very fast pick&place applications. Higher payloads are managed at high speed with M-420iA-M-421iA robots (40-50kg)
› M-410iB series (160-450kg): the most successful palletizing robots in Europe!
› M-900iA series (260-700kg) for very heavy payload with highest wrist inertia. Smaller payload can be handled with the top selling M-710iC (20-70kg) or R-2000iB series (100-210kg)
Our intelligent software and systems ensure reliable and safe handling operations:
› Integrated vision: our latest R-J30iA controller comes as standard with all the necessary hardware for 2D vision: just plug a camera and a cable! This is most cost-effective solution on the market!
› Line tracking software
› Collision Guard to protect robot, tooling and products
› Advanced vision for 2D visual line tracking or 3D bin picking
› Multi robot control for increased cycle time |
|
| KUKA's many years of experience in palletizing offer you new possibilities in the field of palletizing and depalletizing. The tried-and-tested modular system gives you the choice of a wide range of perfectly-coordinated components. |
|
Automatic packaging machine is designed for foiling of processed cheese with aluminium foil.
Dose mass of product: 30g; 62,5g; 100g
Dimensions of briquette: 30g-50x50x12mm; 62,5g-50x50x24mm;
100g-71x52x26mm; 100g-90x46x26mm
Technical characteristics:
*maximum output capacity- 65 bricks/min
*dimensions- 2740x1510x1640 mm
*weight- 1470 kg |
|
| Dispensers EL-5 are capable of rolling humidified paper ready to close carton boxes. Possibility to select the tape sequence as required pushing buttons. Heating for moistening water electronically regulated. The paper rolls can be rolled with the glue coating on the inside or the outside. No noise level when in stand-by: the motor is only started when the program button is pressed. |
|
Automatic wrapping machine is designed for making a sleeve of polyethylene film and locating piece products in it with following closing (sealing).
Packed food-stuffs: wafer cups with ice-cream (ø65xø39xø76) and other food-stuffs by the piece.
Dimension of packages:
-length: 100-240 mm;
-width: 55-210 mm;
-height: 10-70 mm.
Technical characteristics:
maximum output capacity- 90 packs/min
dimensions- 3700x900x1600 mm
weight- 370 kg |
|
Stacking
Application:
Automatic pre-stacking of plates into 2 layers directly off the production line via accumulating roller conveyor for continuous handling of plates
Pre-stacking increases the capacity and reduces the wear of the main stacker
The prestacker stacks up to 17 layers per minute
Products ranging from 400 x 400 mm up to 4050 mm X 2700 mm
Features:
- Robust design for continuous production
- Fast pre-stacking of a wide range of sizes
- Quick changes of program according to product size
- Gentle handling of products
- Compact space-saving design
- Reliable electronic controls for fully automatic operation |
|
Our tagging gun is famous for textile industry where price tagging is necessary.
Our tag gun has light weight & simple design to fit into various working environment. Moreover, we offer affordable prices by using condenced assembly process.
Two Types: Fine needle & Regular needle
Two models: Ace (with no bolt) & Plus (with bolts)
For more information, please do not hesitate to contact our office.
|
|
Products finally must be removed from the end of every automatic line; this can be done by hand or you can choose Bewo's automatic stacker.
The SCP stacker is an excellent solution.
|
|
Automatic packing machine
IMB A, have been projected and built keeping in mind of the various typologies of feeding you roll that are set in the cycles of job.
The versatility of this machine allows him to be set in direct exit to the checker as unity of line to different Checkers or fed by tables of accumulation in automatic.
The machine is managed by PLC and it is able to manage the introduction and clearing you roll in various stations of unloading.
- Structure to closet with integral protection
of the mechanical and electronic parts
- Ample range ø rolls up to ø1300 mm
- Cutter film-fabric with electric blade hidden
- Every type of polythene, both transparent and coloured,
according to optional features, can be used
- Control microprocessor with trouble-shooting feature
- Output capacity up to 60÷100 rolls/h
- Longitudinal Welding by Thermo-fusion
- Edge-Closing by thermo-retraction with hot-air
- Possibility to wind more turns of polyethylene on the roll |
|
| ... products without technical information |
| |
|
|