|
|
| Products 121 to 150 of 233 |
|
|
|
|
Numbering machines: Basis of the numbering machines in such a numbering system is a two-unit construction. The upper unit, containing the mechanical moving parts, can be seperated easily from the unit containing the electronic parts by loosening only two screws.
This concept has a lot of advantages in terms of handling and maintenance:
- The mechanical unit with the moving parts can be handled, cleaned and maintained in the same way as conventional mechanical numbering machines.
- The second unit, containing the sensor electronics, stays on the press as no cleaning and regular maintenance is required.
- After re-connecting the upper mechanical unit no new positioning is required, all machines are in the proper location (no move of lower adaptor unit).
- The numbering machines are equipped with a pre-inking system.
- The non-automatic wheels are locked by means of a spring loaded pin; to turn the wheels one has to push the pin, after releasing it again the wheels are automatically locked.
|
|
ATN is designing and manufacturing high precision printing presses rotogravure/offset/flexo.The main markets are in the cigarettes packaging, liquid boxes and food packaging.
EMERA
Web offset press combined with roto rotogravure/flexo units.
|
|
Label Printing Machines - LPM75
This machine is a 3-Color Narrow Web Dry Offset Printing Machine. It is a rugged machine for high speed and high quality printing. It is used for printing on different materials such as Fabrics, Nylon, Plastic films, paper etc. This machine is very suitable for printing logo labels, wash-care labels for the garment industry on different kinds of fabrics.
Features :
- Sturdy well designed machine
- Electronic drive for speed variation
- Inching mode for setting
- Revolution / RPM counter
- Auto lubrication system
- Heater for quick drying
- Options for printing on elastic bands
- Provision for reverse printing
|
|
|
|
|
|
Matthews was one of the early Pioneers that designed and manufactured industrial quality, offset printers. This term offset printing means that a mark made by ink is transferred from a solid rubber covered roll, commonly referred to as a blanket roll. Offset printers are three roll systems that incorporate an ink roll, type wheel, and blanket roll. The type does not come into contact with the product on an offset system.
This system minimizes the amount of type wear while producing a permanent, consistent quality mark. The Print-A-Mark Offset Printer line, furnished by Matthews are available in 1", 2" and 3" wide roll units. Our standard printers are generally friction driven, obtaining their power from coming into contact with the product causing the product to revolve the printer.
Motor drive package options are available for applications that require an assist to revolve the offset printer. This is sometimes necessary when the product has a small diameter, or too little friction available at the blanket roll contact point.
|
|
General description
With over 20 years experience in laser marking, CMS is your best choice for fully integrated 4th generation PCB (Printed Circuit Board) laser marking systems.
All of our systems utilize high speed galvo steered lasers to mark any combination of:
- IDM Square matrix codes
- Rectangular matrix codes
- ECC 200 2D matrix codes
- UPS, 2 of 5, 3 of 9, 128 and EAN linear barcodes
- OCR Machine-Readable Text
- Alphanumeric Text with various fonts
- Graphics and logos
Our systems can be stand alone or can be integrated into your already automated production line. Systems can be designed to use automatic stackers, flippers, or any other kind of part handling system. See the PCB Marking system detail page for more features!
|
|
Function
The unit consists of a servo driven X/Y axle, a rotating application head and a conveyor with positioning mechanism to pick up and place the PCBs. The PCB is transferred by the conveyor into the application area. The X/Y axle moves the application head to the printer, a label is taken and then applied to the PCB. After the application process the PCB is released and then transferred to the following unit.
Special features
- PC controlled unit
- User guidance
- Print control possible after printing or after application
- High performance servo drive
- Rotating applicator head
- Printer slides out for easy maintenance
- Barcodes and data-matrix labels
- Programmable Z-axis
- 2 Thermal transfer printers
- ASYS label software for creating labels
|
|
ALFA range is designed for automatically punching, marking and shearing of profiles. Therefore, the final part is obtained in a whole and single process increasing the efficiency and erasing loss of time.
Automatic line CNC controlled for punching, marking and shearing profiles. This solution is ideal for metallic constructors. The bars (flat bars up to 500x400 mm, and angles up to 150x150x15 mm) up to 12 m long are pushed and clamped by a carriage. Material is always guided by lateral roller against line reference.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
FlyMarker® Mobile
Independent, hand-held CNC marking device
Marking area (x/y) 75 x 25 mm
Sturdy, low-noise, electromagnetically driven marking pin
Marks nearly everything, permanently...point by point!
100% mobile and compact hand-held pinmarker
Integrated display, keyboard, rechargeable battery
Optimum price performance ratio!
Instruction time for operators without CNC-knowledge: 1 minute!
Marks clear and well defined numbers, letters, various signs and logos in
dot matrix
Dot peening marking system
|
|
|
|
|
|
Microdots Marking Systems, the model P.2 has a window area of 100x35mm (4x1.4In). Here P.2 is displayed as portable marking machine.
Technical Details:
This technology can mark up to a 1mm depth and on surfaces irregularities up to 14mm (0.5In).
All models are available:
as portable handy tools,
as integrated systems,
as fixed structures.
Easy to program, P.1 can manage all following functions:
1000 programs in memory,
texts in line, angular, mirror,
arc-texts,
serial numbers,
batches of production,
time and date,
working shifts,
customized codes,
preview, diagnostic and many more.
The excellent management of the mechanical movements allows marking:
logos,
2D Matrix and OCR codes,
fonts per dots 5x7 and 11x16,
continuous line fonts.
The flexibility of the software allows communication:
with PC direct and wireless,
through RS232 / RS485,
from/to PLC,
from Bar Code readers,
TXT files,
integrated floppy disk port.
Low maintenance, reliable and friendly use, all Microdots Marking Machines are supplied complete with programmable controller with JOG function, tungsten-carbide stylus in 3mm or 6mm diameter, filter and air regulator and all accessories to suit customers needs.
|
|
|
The portable dot peen marking machines can indent any type of materials, from plastic to hardened steel up to 62 Hrc. The electromagnetic stylus can mark parts of different shapes and different surfaces (flat surfaces, concave or convex surfaces, circular parts, rough or machined surfaces...). They are designed for heavy duty environment. Portable dot peen marking machines are well suited to the identification of heavy or large parts.
|
|
Portable machine - compact - Lightweight - speed
Marking window : 50x20mm
For part marking and identification, the XF520Cp portable machine offers both speed and reliability in a practical and compact size.
HIGH-PERFORMANCE
Speed, reliability and excellent marking quality : up to 10 characters per second !
HAND-ADAPTED & EFFICIENT
Lightweight, its compact size can mark locations that previous systems can't reach.
NEW GENERATION ELECTRONICS
UC520, fast creation of the marking files thanks to an integrated intuitive and user-friendly software.
|
|
Portable EasyMarker EM 100
Functions equal to standard model, but easy for transport and applicable on larger objects at your premises.
Easy operation: place EasyMarker on your part and press the start button in the handle. The entered data will be immediately retrieved.
|
|
Mobile Marking Station:
Portable table
All steel construction
Tabletop is non-slip vinyl-matted 36” long x 22” wide
Bottom shelf 30” long x 20” wide
Wrap around bumper
14” x 20” x 5” small parts drawer with cylinder lock and keys
Six 3-prong grounded outlets on a plug strip with circuit breaker
Full pneumatic wheels, 2 swivel 2 rigid with brakes
Heavy Duty Retractable Electric Reel
Automatically retracts
125 volts
10 amps
7-3/4” wide x 12” deep x 12-3/4” high
Nema 4 rated
Cord length 30 foot
Air Line Reel
Double o-ring seal
Pressure rating to 250 P.S.I.
Ratchet engagement
Fully enclosed and replaceable rewind spring
Adjustable guide arms
1” solid steel axle
Full flow brass swivel joint
Overall size 17-1/4” long x 7” wide x 18-1/4” high
30 foot of 3/8”I.D. hose
|
|
|
|
|
|
The handy marking solution.
A handheld machine, the M3000 offers the freedom of movement you need thanks to its design and portable battery. It can mark parts which are large, heavy, or in hard-to-reach areas.
The M3000 is available in pneumatic or electromagnetic versions.
TECHNICAL INFORMATION
- Marking area: 60x40 mm
- Character size: 1-30 mm in increments of 0.1 mm
- Dimensions (without handle):
L=350 mm
l=240 mm
H=200 mm
- Weight: 4.5 kg
MARKING POSSIBILITIES
- Linear, radial and angular marking
- Special marking (normal, inverted, mirrored, reflected text)
- Character adjustment, centering, character spacing, compression, inclination
- Programming of varaible data:
date and time, incrementing serial numbers, batch numbers, shift codes...
- Logotypes
- Available fonts: point separated or 5x7 matrix, CE mark
DOCKING STATION
This accessory converts your portable machine into a benchtop machine.
With a crank, you can easily adjust the distance between the stylus and the part for small parts and tags.
ACCESSORIES
Pro-Pen offers a large choice of accessories for these marking machines.
|
|
The PinMark™ handheld embossers are applied when products or components are difficult to move due to their weight or size. The handheld devices also demonstrate their advantages fully in poorly accessible locations. Special attention was paid to practical operation here: the embossing head is simply applied to the object to be marked. The marking procedure is then initiated with the switch integrated in the handle.
Due to their proven robust and compact construction, you will be able to create extremely precise markings on your products or components.
|
|
Portable e7-p62 e7-p122 Dot Marker
p62 Advantages
- Electromagnetic: No air supply
- Integrated keyboard
- Graphical screen
- Simple and user friendly
- Robust and ergonomic design
- Cost effective
|
|
Indent-A-Mark Roll Markers are used in applications where larger characters, longer legends and greater marking force are required. With the proper tooling, roll marking is used to mark on metal products with flat, concave, convex, recessed, round, cylindrical and conical surfaces.
During the marking cycle, a ram travels vertically downward, then across the part to be indented. Each indented character is formed one at a time. A flat die with a dove tail holder is used to mark around the circumference of round parts and a roller die is used to indent on flat parts.
- Permanent product identification.
- For large characters and long reading legends.
- Accomodates a variety of product shapes.
- High-speed production line marking.
- Easy setup and message changeover.
- Good character formation and legibility.
- Safe, reliable marking method.
|
|
- Use one machine to mark both round and flat parts
- Uses less pressure than other types of marking, which reduces distortion and provides a quality mark on thin-walled material or uneven surfaces
Roll marking machines offer a fast, efficient method of stamping either round or flat parts. Consistent marks made with less pressure can be achieved with the use of steel roller dies for flat parts or type holders with individual type for round parts.
Manual Model MB-40
Small, precision machine for marking flat and small diameter cylindrical parts. Hand-powered unit can be used with flat dies or numbering heads for stamping round parts.
Pneumatic Model MFR-05
Bench mounted, air operated machine for marking flat or cylindrical parts up to 8” in diameter. Available with an adjustable table that uses X and Y slots and 16 tapped holes for easy mounting and fixturing.
|
|
|
Quality for more than 50 years. Most advanced production processes with CNC controlled turning and milling centres, highest depth in production and skill and experience for decades guarantee a quality of our numbering machines which exceeds the requirements of the printing industry. A computer controlled hardening and chromium/ nickelplating guarantee a constant hardness and nickel and chromium coat.
|
|
CNC Scribe Marker VU4 Sprint
Marking area (x/y) 80 x 50 mm
Option sprint enables shorter marking times. Aprox. 2 - 3 seconds for 10 characters in 3 - 4 mm character heights
Expansion of the central unit with a sprint drawer
Fully prepared and ready to be integrated marking system
Easy integration in production and assembly lines
Infinitely adjustment of the different marking strengths
Works in all positions
Highest marking repeat accuracy by high value linear guidance in connection with ball bearing screws
Particular suitable for data matrix marking
Maintenance free mechanics and tools
Protective covering against smut
|
|
Scratch Marking Systems,
the model Artiglio has a window area of 180x100mm (7x4In), here is displayed as fixed marking machine with base and double column.
Technical Details:
Easy to program, P.1 can manage all following functions:
1000 programs in memory,
texts in line, angular, mirror,
arc-texts,
serial numbers,
batches of production,
time and date,
working shifts,
customized codes,
preview, diagnostic and many more.
The excellent management of the mechanical movements allows marking:
logos,
2D Matrix and OCR codes,
continuous line fonts.
The flexibility of the software allows communication:
with PC direct and wireless,
through RS232 / RS485,
from/to PLC,
from Bar Code readers,
TXT files,
integrated floppy disk port.
Low maintenance, reliable and friendly use, all Scratch Marking Machines are supplied complete with programmable controller with JOG function, Diamond stylus filter and air regulator and all accessories to suit customers needs.
|
|
The e8-i61S and e8-i111S scribe marking machines can mark all types of materials, from plastic to hardened steel up to 62 Hrc. The scribing technology produces high quality characters and logos with continuous line style. Noise level operations are extremely low. Deep marking can be achieved (up to 0.7 mm / 0.3).
Scribing is produced by the continuous motion of a diamond or tungsten carbide stylus pin mounted within a pneumatic cylinder.
The e8-i61S and e8-i111S scribing systems are robust and reliable. They are perfectly suited for heavy industrial environment. Stainless steel shutters protect their internal components.
|
|
The scribing technology marks permanently, directly on the material, on plastics and the hardest of steels (62 HRC).
The marking content (text, logotypes, traceability variables, time & date) is made by a carbide or diamond point that under pneumatic pressure penetrates the surface the surface to mark. Continuous point displacement is very accurate (steps of 0.025 mm), via an X/Y (X=100 mm et Y=120 mm) crossed mounting plate and operated with a fully-autonomous unit control.
The continuous stroke, very legible, is obtained without consumables or percussion, thus reducing the sound level to less than 72 dBA.
|
|
SITELMK3-G2
SPECIAL FOR FAST CONTINUOUS LINE MARKING
MARKING PRESSURE UP TO 45 KG WITH 6 BAR AIR PRESSION
SILENT MARKING
HIGH ROBUSTNESS AND DURATION
FULLY SELF-CONTAINED
EASY INSTALLATION
HIGH MARKING FLEXIBILITY AND QUALITY
ELECTRONIC ADJUSTMENT OF MARKING POWER
Marking area: 130 x 100 mm
Marking speed: up to 3 characters/second
|
|
TeleScribe® Marking Systems
The SC3500/420 and SC5000/420 are the right choice when deep, low noise marking is required. Especially well-suited for VIN (Vehicle Identification Number) Marking applications. Marking windows available: 4" x 6" (100 x 150mm) or 2½" x 7½" (63.5 x 190.5mm)
TeleScribe® Product Line
SC3500/420
SC5000/420
SS5500
|
|
MULTI4 is available in Scratching version. This technology using compressed air is ideal in situations where marking impact noise is an issue (<72dba) or where highly defined characters are required.
It allows permanent marking on numerous materials, from plastic to tempered steel.
Precise, accurate and easy to use, the Multi4 Scratching technology is particularly suited for marking parts generating noise, for good looking marking as well as for tooling marking.
Marking layouts or files can be created and marked in seconds. With the standard marking functions provided, marking errors are highly reduced or eliminated.
The MULTI4 Scratching model is an ideal system for marking simple or complex components in batches or longer runs.
|
|
|
|
Other marking and engraving techniques
