|
|
We offer everything you need for electrolytic marking ...
Manufactured at our own production site in Germany.
Whether you need a manual workplace, a semi-automatic system or a fully-automatic solution: it will be difficult for you to challenge us with a problem in the field of electrolytic marking that we have not solved already.
The examples in the right column merely represent a small selection from our programme. We can supply everything you need for the most varied product shapes, sizes and other specifications.
Electrolytic marking remains a very clever solution to obtain first class marking results with simple means.
Accessory examples
ÖSTLING electrolytes for nearly any alloy
Marking heads for all product shapes and sizes
Multi-digit stamps for changing serial numbers, etc.
Stencil paper for the easy creation of templates with the typewriter or a printer (available from us)
ÖSTLING PT devices for the fast creation of temporary templates for frequent data changes (e.g. serial numbers, 2D codes)
All sizes of long-term templates available (several thousand high-quality markings)
Our long-term templates are of the highest quality and often applied by users of other electrolytic devices (incl. marking devices / etching devices).
We are happy to assist you personally.
|
|
FlyMarker® Mobile
- Independent, hand-held CNC marking device
- Marking area (x/y) 75 x 25 mm
- Sturdy, low-noise, electromagnetically driven marking pin
- Marks nearly everything,
permanently...point by point!
- 100% mobile and compact hand-held pinmarker
- Integrated display, keyboard, rechargeable battery
- Optimum price performance ratio!
- Instruction time for operators
without CNC-knowledge: 1 minute!
- Marks clear and well defined numbers, letters, various signs and logos in
dot matrix
- Dot peening marking system
|
|
The easiest and cheapest marking system for aluminium and cardboard packages.
Manual use. Suitable for low-medium outlets. (estimated 900 to 1200 markings per hour)
1-2-3 lines typeholder available. Impression depth regulation.
Dimensions: mm 150 x 250 x 300 (total height)- inches 5.90 x 9.85 x 11.8 (total height)
Weight: 7 Kg - 15.5 lb
|
|
MARKER HP1 - MODEL HP1
CAPACITY 2"
WEIGHT 26 KG
DIMENSIONS L x D x H 370 x 280 x 490 mm
N° OF CHARACTERS 16
CHARACTERS HEIGH 3 mm
2 LINES OPTIONAL
PROGRESSIVE COUNTER OPTIONAL
MARKER HP1 - MODEL PNEUMATIC
CAPACITY 2"
WEIGHT 50 KG
DIMENSIONS L x D x H 720 x 250 x 500 mm
NO. OF CHARACTERS 16
CHARACTERS HEIGHT 3 mm
DOUBLE CONTROL included
2 LINES OPTIONAL
PROGRESSIVE COUNTER OPTIONAL
PNEUMATIC PEDAL OPTIONAL
|
|
Precision screw bearing for a high accuracy application with high force (example : robots).
Scribing marking on the steel cylinder circumference.
Material is hardened steel on smooth surface.
The mechanism of this rotary device was designed with almost no play for high quality mark
A 3 stages reducer is used to develop the power for deep scribing marking.
|
|
MODEL WP-1HS
WALDORF MODEL WP-1HS: PNEUMATIC ONE TON HOTSTAMPER. COMPLETE WITH THERMOSTATIC CONTROLS, AIR FILTER AND REGULATOR, DOUBLE SAFETY PALM BUTTONS, AND ELECTRIC FOIL FEED.
MODEL WHHS
WALDORF MODEL WHHS: MECHANICAL TOGGLE HAND HOTSTAMPER. COMPLETE WITH THERMOSTATIC CONTROLS, SPRING RETURN, MECHANICAL FOIL FEED, AND ADJUSTABLE SLIDING TABLE.
MODEL WPT- 2.5HS
WALDORF MODEL WPT-2.5HS: PNEUMATIC TOGGLE 2 1/2 TON HOTSTAMPER. COMPLETE WITH THERMOSTATIC CONTROLS, AIR FILTER AND REGULATOR, DOUBLE PALM BUTTON SAFETY CONTROLS, AND ELECTRIC FOIL FEED.
|
|
Hot marking numbering heads art. 4967/M
Direct marking or using coloured foil transfer, on plastic, wood, cardboard etc.
Progressive numbering by manual or mechanical movement of the actuating pawl.
Electrically heated by its own internal heating element. The numbering head can be fitted on fly, cam, pneumatic and hydraulic presses.
Ideal for fitting on our press R5/C for hot numbering (see catalogue page -21).
|
|
Balluff identification systems help in managing the flow of information in production operations. The right data at the right time: this is what the BIS system promises. The data carrier stores all the information, which can then be read or re-programmed at any desired decision point.
|
|
Identification Systems
Identification systems are used for object identification. They can be used to automate manufacturing processes and to control the entire logistics of merchandising management through flexible networking. This reduces throughput times and makes variant manufacturing more flexible. Pepperl+Fuchs offers a comprehensive range of electromagnetic identification systems (RFID). Object identification is also possible using barcodes and data matrix codes.
|
|
|
These steel stamps give a deep legible impression in metallic surfaces. A perfect relief and a strict gauging of pieces make easy positioning and excellent marking possible, using only a hammer. Letter and figure stamps with relief on right cutting are used for imprinting moulds and dies. Mini stress stamps provide an impression without creating stresses in impressed metal such as may result from a sharp or pointed impression .
|
|
Manual Presses 600 Kg / 3T / 6T
Wide range for marking, numbering, riveting, crimping with high performance and precision.
Pneumatic Presses 600 Kg / 3T / 6T
Pneumatic presses are adapted for all productivity enquiry. On request, bimanual push button safety control can be adapted.
|
|
MONODE STEEL STAMP'S COMPLETE LINE OF IMPACT PRESSES
The MONODE line of manual and pneumatic impact presses provides the versatility needed in your manufacturing operation. Whether the need is marking, piercing, shearing, punching, forming, stamping or assembly, the MONODE impact press will be one machine for all your needs. The unique impact spring design provides consistent pressure from piece to piece, even with variations of the air pressure or operator input.
|
|
Hand controlled impact presses
Pre-set to mark:
- tags or labels;
- iron castings;
- metal parts etc...
Any of our standard numbering heads (art.4916 or art.4697) can be fitted on the press as can hardened steel dies with tangs.
Art. R5/M
Lever-operated hand controlled impact press, impact force adjustable from 0 to 3000 kg complete with a series of striking springs and users spanners
|
|
FRAP S1 : PERCUSSION PRESS (pneumatic).
An air operated machine suited to marking, numbering, identifying, crimping, rivetting, punching, and other applications.
Features:
Striking load ajustable from 0 to 7,500 kg.
Weight : 165 kg.
Running: air pressure 6 bar.
Bimanual security operating.
Hourly output : About 2000 impacts.
Anti-double striking device.
Shank: Ø 16 x 50 mm .
Possibility to fit a longer column..
We make all engravings adaptable to this machine.
|
|
For secondary operations of steel, aluminum or plastic parts we offer a system of units for coining/marking, piercing and forming with forces from 1 to 100 kN.
For these operations normally only a short stroke power stroke (<1.0 mm) is required. That is why our pneumatic PFS units, which develop maximal force shortly before reaching the end position, are ideal for these operations.
Pivoting the tool 75° into the working position, this design allows an easy load and unload of the parts.
We have been active in this field for over 15 years focusing on automotive sheet metal. Especially for individual applications we can offer a broad spectrum of solutions based on our experience. Please send us a description of your unique application.
Since more than 30 years TUENKERS is working closely with the automotive industry. That makes us happy, because it is well known that automobile manufacturers do have particularly high quality demands.
|
|
Carousel Accessibility of the TAPMATIC MARKING HEAD makes it possible to mark the part while still set up in the machine, eliminating expensive secondary operations and additional equipment and labor.
FEATURES & BENEFITS:
- In-Carousel Design & Compact Size: Easily positioned in tool magazine or turret without interfering with machine components or work piece.
- Multi-Character Marking Letters & Numbers: Up to 15 characters and 0.25 maximum character height.
- Marks In Less Than 1 Second
- Adjustable and Uniform Marking Depth
- Precise Marking Location Repeatability
- Positive Locking
- Easy Type Change
- Accepts Blank Spacers
APPLICATIONS:
- Designed to work in conjunction with CNC Machining and Turning Centers as well as any Manual Turning, Milling or Drilling Machines.
- Shank Sizes: 3/4", 1.0" and MT3.
- 2 Stamp Holding Systems: Integrated Type Holder or ER Collet Chuck to hold your own customized stamps.
- Uses: With the TAPMATIC MARKING
HEAD you can mark: Date, Part Number, Description, Company Name etc.
on your work piece while still on your machine.
|
|
We offer a broad range of knurling wheels
for form knurling
cut knurling
as well as customized knurls according to individual requirements. Our standard product programme consists of more than 170000 knurling wheels made of HSS, PM, HM. Please contact us for further assistance.
|
|
|
Dies for infeed and through-feed rolling processes are available in diverse profile configurations to meet the highest quality demands.
|
|
The Centromatic machines center and edge lenses of 10 to 300 mm in diameter – fast, reliable and precise.
The complementary tool geometry permits processing of complex lens shapes (i.e. not-rotatory symmetric contours as well as not round shapes) without tool change – with two spindles (option) even faster.
The Centromatic grows with your demands, extension is easy, because of the modular construction.
|
|
High precision laser engraving system for marking ophthalmic progressive lenses. The CO2 laser system is prepared to engrave semi-visible markings on organic lenses. Marks convex and concave surfaces. Desktop system.
|
|
The model FP 23 is the smallest of the engraving machines of the FP series. Thanks to the strong structure made of cast iron and to the generous dimension of the mechanical components in general, it allows to face in absolute calm any professional milling, despite the redoubts dimensions of encumbrance. The powerful 600 W mechanical spindle, allows to also perform heavy milling on stainless steel or drill aluminium and brass plates, possibility absolutely blocked to other "similar" machine present on the market.
To all of this it is added an extraordinary reliability that will allow you to exploit all the potentialities of the machine for thousand of times of job, without any decadence of the characteristics of precision that countersign this engraving machine since the first hours of use. Almost total absence of operations of maintenance and possibility to work for many hours without interruptions are characteristics that confer to the FP 23 an absolute record of productivity and of made economic in the category of the compact engraving machines.
|
|
* A manually operated machine with electric heating suited to hot marking, with or without foil, on wood, plastic, leather, cloth, paper, etc
- Hauteur totale en mm : 645
- Surface de la table en mm : 165 x 165
- Passage sous la gravure en mm : 380
- Entraxe broche-colonne en mm : 145
- Poids : 40 kg
- Bloc chauffant 220 V -300 W. Dimensions en mm : 60 x 80
- Rhéostat électronique de réglage detempérature : 0 à350°C
- Avance automatique du papier transfertréglable de 0 à80 mm
- Largeur maximum du rouleau papiertransfert -en mm : 100
- Force réglable
- Arrêt mécanique de la course de la broche
- Production horaire : 1200/1500 pièces
- Possibilitéde monter une colonne plus longue
- Nous réalisons toutes les gravures adaptables sur cette machine.
* A pneumatic operated machine with electric heating suited to hot marking, with or without foil, on wood, plastic, leather, cloth, paper, etc.
Total height: 640 mm.
Working area size: 160 x 160 mm
Maximum daylight (without tooling): 300 mm.
Throat: 150 mm.
Weight: 70 kg.
Air presure: 4 bar.
Heater block 220 V - 1000 W.
Dimensions: 60 x 80 mm
Electronic rheostat for tempeature adjustment from 0 to 350°C.
Automatic foil feed adjustable from 0 to 80 mm.
Maximum width of the foil roll: 100 mm.
Adjustable load.
Mechanical stop of the spindle stroke.
Hourly output: 1,200/1,500 parts.
Possibility to fit a longer column.
We make all engravings adaptable to this machine.
|
|
Hand controlled hot marking press art. R5/C
Pre-set for hot marking with coloured foil transfer.
Technical characteristics:
- electrically heated by internal heating element: 220V - 300W;
- 0 to 350° C heat regulator;
- ideal for our hot marking numbering head Art. 4967/E.
PNEUMATIC CONTROLLED HOT MARKING PRESS - ART. R2 CB
Pre-set for hot marking with coloured foil transfer.
Technical characteristics:
- electrically heated by internal heating element: 220V - 300W;
- 0 to 350° C heat regulator;
- ideal for our hot marking numbering head Art. 4967/E.
|
|
|
|
Other marking and engraving techniques
