|
|
| Products 91 to 120 of 234 |
Precision screw bearing for a high accuracy application with high force (example : robots).
Scribing marking on the steel cylinder circumference.
Material is hardened steel on smooth surface.
The mechanism of this rotary device was designed with almost no play for high quality mark
A 3 stages reducer is used to develop the power for deep scribing marking.
|
|
|
|
|
|
When you need a permanent mark on extruded plastic products, the Matthews Hot Print continous rotary branders can get the job done. This friction-driven system is ideal when ink marking alone does not meet code requirements. Available in two styles, with or without foil, both units use heated steel type to form a crisp indented mark that is permanently imbedded in plastic pipe and other in-line extrusions.
Some new enhancements to this product line include a tape-saver motor & retrograde tape-saver kit designed to prohibit the foil tape waste involved in typical continuous marking processes. By purchasing a model with this feature or retrofitting a tape-saver motor to your existing Hot Print Brander, all colored tape is consumed at a reduced rate eliminating space holding characters. This innovation allows for a great reduction in the production cost of marking foil tapes.
The resulting mark is abrasion-resistant, making the product suitable for both outdoor and underground use. For a high-contrast mark, the Thermo Foil brander adds the option of embedding a colored foil into the branded mark. The result is a highly visible, yet permanent mark on ABS, polybutylene, polyethylene, PVC and Styrene. Installing a Hot Print Model 4015 Brander on your extrusion line is effortless. The systems come complete with a mounting stand and deluxe guide rolls to accomodate pipe ranging in size from 1/2" to 8" (12.5 mm - 200.8 mm).
|
|
Our Compact range of Hot Foil printers are widely recognised as probably the most reliable and efficient systems available on the market today.
The units are compact, reliable and robust. They offer an exceptionally high print quality with a wide range of options that suit most applications.
Options include extended reach and low print run models for restricted spaces. An IP65 version is available, designed to work consistently within dusty and wet environments
Features
- Print areas ranging from 38mm x 25mm through to 78mm x 45mm
- Extended reach options
- Comprehensive range of clip-in type holders
- Flexible character print format layouts
- All version have quick foil change magazines
- Foil run out warning systems as standard
- Patented foil indexing system that minimised foil waste
|
|
|
|
|
|
Technical Parameter: H-TC-300
1. Max. Stamping Size:300 400 mm (1216 inch)
2. Working table area:500 650mm
3. Max printing pressure:15,000 Kg
4. Up and down distance:70mm
5. Heat wattage: 3000W
6. Foil in feed: Motor Drive
7. Temperature adjustment:0-300oC
Production Advantage :
1.Vertical Pressure design ensures big pression;
2.Capable of adjusting the stamping pressure, the temperature and the speed;
3.Worktable slight adjustment ensure precision stamping;
4.The height of the stamping head adjustable ;
5.Automatic foil feeding and collecting.
6.Photecell installed to finsih heat transfer process.
Caution: Pay attention to High temperature state when Machine running. Aviod Putting your hand on the woking table while Machine starting.
Stamping Plates Materials: Silicon Rubber Edition ;
Copper-Zincograph;
Magnesium Edition.
Product Description:
Mobile screen , Household appliances Panel , Thick paper card, PVC board Etc large dimension Flat substrate stamping and Bronzing.
Woodiness objects baking-burns and Impress;
Leather bronzing and Molding;
Paper products concavo indentation.
Graduated disc of clock bronzing.
|
|
|
|
|
|
Automatic Cylinder Hot Stamping Machine (For Cap's Circle Edge)
Specifications︰
1. Total consume Wattage: 260W;
2. Stamping temperature Rnange:20∼300℃;
3. Compress air Pressure﹕5－8Bbar;
4. Products Diameter:﹕（φ15~Φ80mm）（20~200mm）
5. Max stamping Speed:2000-3000pcs/hr
6. Outer dimension: 230021601200mm;
Advantages︰
1. Vertical Pression design and stabilization Pression;
2. Capable of adjusting the stamping pressure, the temperature and the speed;
3. Automatically counter available;
4. Automatic back-and-front worktable ensures safe and quick operation;
5. Worktable capable of slight adjustment of back-and-front, left-and-right and rotation;
6. Automatic foil feeding and rolling with adjustable function;
7. High precision sensor available for foils feeding, ensures good registration;
8. Safe protection device installed。
Application:
This machine is one of the newest designed fully automatic hot stamping, it is adopted the newest technology for printing & stamping machine. During stamping and printing, the loading and unloading system of the material, is the most advanced technology in stamping and printing area. The machine could be used automatically including the feeding and hot stamping. Due to adopt the system-controllor, which organized the operation systemometer by the touch screen, the machine has been characterized by the easy operation, high speed printing, best quality stamping etc. The machine is mainly applied to hot stamp on the different kinds of wine bottle cap, cosmetic bottle cap, chemical bottle cap and all other kinds of caps. The suitable hot stamping materials included plastic, glass and metal etc.
|
|
Stamping Machines : STM-150-CS+
Features
- Servo driven main spindle - offers very high speed operation.
- Machine can work with narrow width foil - offers foil saving.
- Single station machine - reduces set-up time & tooling costs.
- Automatic ejection of part *- increases productivity.
- Easy setup & operation
- Easy roller alignment in Y axis & angle adjustment - reduces set up time.
|
|
Stamping Machines : STM-1000-F
FEATURES
- Suitable for medium plastic articles.
- State of the art PLC - ensures precise parameter control.
- Pneumatically operated - ensures clean surrounding C type structure for enhanced rigidity.
- Easy and precise block alignment in x , y, angle, parallelism & depth- quick settings and excellent stamping results.
- Powder coated / electroless nickle / hard chrome plated machine parts - prevents corrosion & enhances machine life.
- Dual 'start' button operation for operators safety.
- Various attachments like peripheral printing, linear conveyor etc. can be mounted.
|
|
MODEL WP-1HS
WALDORF MODEL WP-1HS: PNEUMATIC ONE TON HOTSTAMPER. COMPLETE WITH THERMOSTATIC CONTROLS, AIR FILTER AND REGULATOR, DOUBLE SAFETY PALM BUTTONS, AND ELECTRIC FOIL FEED.
MODEL WHHS
WALDORF MODEL WHHS: MECHANICAL TOGGLE HAND HOTSTAMPER. COMPLETE WITH THERMOSTATIC CONTROLS, SPRING RETURN, MECHANICAL FOIL FEED, AND ADJUSTABLE SLIDING TABLE.
MODEL WPT- 2.5HS
WALDORF MODEL WPT-2.5HS: PNEUMATIC TOGGLE 2 1/2 TON HOTSTAMPER. COMPLETE WITH THERMOSTATIC CONTROLS, AIR FILTER AND REGULATOR, DOUBLE PALM BUTTON SAFETY CONTROLS, AND ELECTRIC FOIL FEED.
|
|
Balluff identification systems help in managing the flow of information in production operations. The right data at the right time: this is what the BIS system promises. The data carrier stores all the information, which can then be read or re-programmed at any desired decision point.
|
|
Identification Systems
Identification systems are used for object identification. They can be used to automate manufacturing processes and to control the entire logistics of merchandising management through flexible networking. This reduces throughput times and makes variant manufacturing more flexible. Pepperl+Fuchs offers a comprehensive range of electromagnetic identification systems (RFID). Object identification is also possible using barcodes and data matrix codes.
|
|
Manual Presses 600 Kg / 3T / 6T
Wide range for marking, numbering, riveting, crimping with high performance and precision.
Pneumatic Presses 600 Kg / 3T / 6T
Pneumatic presses are adapted for all productivity enquiry. On request, bimanual push button safety control can be adapted.
|
|
Using the impact indenting method, the entire message is indented at one time using an impact press with a press-style die, holder and changeable type or numbering head. The force to indent the product is produced by a compression spring in the impact press. The machine and tooling selected is determined by the size of the inscription and the resistance (hardness) of the material.
Matthews impact presses are available in six models for manual or pneumatic operation with an indenting force ranging from 1/2 ton to 10 tons. Production rates are limited by the speed of loading and unloading the press.
Press indenting is useful for marking on products which require long production runs, precise mark registration and controlled marking. Indenting can be achieved as part of the production process or as a separate operation.
|
|
MONODE STEEL STAMP'S COMPLETE LINE OF IMPACT PRESSES
The MONODE line of manual and pneumatic impact presses provides the versatility needed in your manufacturing operation. Whether the need is marking, piercing, shearing, punching, forming, stamping or assembly, the MONODE impact press will be one machine for all your needs. The unique impact spring design provides consistent pressure from piece to piece, even with variations of the air pressure or operator input.
|
|
Jacobsen's impact wheel marker is an add-on module for positively marking defective wheels.
The impact marker physically deforms defective wheels, ensuring that they cannot be accidentally mistaken for good ones.
The wheel marker is standalone, turn-key module that can be added to any process in a wheel foundry. It can be installed in-line anywhere where defective wheels are removed from the process.
Jacobsen's impact wheel marker positively identifies defective wheels by visibly denting the rim. A wheel that has been dented is both visually and functionally defective, and cannot be accidentally used as good.
The marker is a complete turnkey unit, requiring only power, trigger and compressed air inputs. The marker uses a special pneumatic/hydraulic cylinder that generates high pressures without the need for hydraulics.
The marker will work for wheels from 12" to 22" in diameter and from 4" to 12" in width.
|
|
Economical and safe for low to high volume applications
Fully adjustable for safe, controlled-depth marking
Precision marking minimizes distortion and cracks, even on fragile materials
Mark-FirstTM marking presses can be used on a bench-top or can be mounted for in-line indenting. Use a type holder to arrange type for simple alphanumeric marking or a numbering head for serializing. Custom type and type holders are available for special marking needs.
Mark-FirstTM marking presses can be used on a bench-top or can be mounted for in-line indenting. Use a type holder to arrange type for simple alphanumeric marking or a numbering head for serializing. Custom type and type holders are available for special marking needs.
Mark-FirstTM presses satisfy a wide variety of stamping and embossing needs, and can also be used for riveting, crimping and other operations. Marking is actuated by compressing and releasing a spring-loaded ram for controlled marking depth.
|
|
For secondary operations of steel, aluminum or plastic parts we offer a system of units for coining/marking, piercing and forming with forces from 1 to 100 kN.
For these operations normally only a short stroke power stroke (<1.0 mm) is required. That is why our pneumatic PFS units, which develop maximal force shortly before reaching the end position, are ideal for these operations.
Pivoting the tool 75 into the working position, this design allows an easy load and unload of the parts.
We have been active in this field for over 15 years focusing on automotive sheet metal. Especially for individual applications we can offer a broad spectrum of solutions based on our experience. Please send us a description of your unique application.
Since more than 30 years TUENKERS is working closely with the automotive industry. That makes us happy, because it is well known that automobile manufacturers do have particularly high quality demands.
|
|
Brain Cells are a revolutionary method of storing information with a product . For many years barcodes have been used for identification of products, however, the brain cell technology has taken a significant leap forward in the information storage and retrieval.
Each Brain Cell contains a microchip memory which requires no battery and can store relatively large amounts of data. The real advantage is that these devices not only allow information to be read from them but can also have a new data written to them by the PAT Tester, using a simple wand similar to a barcode pen.
|
|
We offer a broad range of knurling wheels
for form knurling
cut knurling
as well as customized knurls according to individual requirements. Our standard product programme consists of more than 170000 knurling wheels made of HSS, PM, HM. Please contact us for further assistance.
|
|
|
Dies for infeed and through-feed rolling processes are available in diverse profile configurations to meet the highest quality demands.
|
|
The Centromatic machines center and edge lenses of 10 to 300 mm in diameter fast, reliable and precise.
The complementary tool geometry permits processing of complex lens shapes (i.e. not-rotatory symmetric contours as well as not round shapes) without tool change with two spindles (option) even faster.
The Centromatic grows with your demands, extension is easy, because of the modular construction.
|
|
High precision laser engraving system for marking ophthalmic progressive lenses. The CO2 laser system is prepared to engrave semi-visible markings on organic lenses. Marks convex and concave surfaces. Desktop system.
|
|
|
|
|
|
Line printers (or impact printers) continue to be the unchallenged leader in reliability, while delivering the lowest cost per page printing and widest range of forms flexibility.
P7000 Printers
Printronix introduces the 6th generation P7000 line printer family. Advancing its industry leading web-enabled remote management capabilities, and coupling a host of reliability and usability enhancements, the P7000 printer represents the best line printer ever made and the ideal solution for high volume low cost printing of mission critical reports, forms and labels.
P7000 Ultra Capacity ribbon - up to 300% longer life with darker, sharper print
Integrated Print Management - total visibility and control of image quality and consumables
High speed - up to 2000 LPM
Low cost of operation - typically 10X lower than laser or serial matrix
Forms flexibility - straight paper path and heavy duty pulling power
Rugged design holds up to abuse and harsh environments
100% duty cycle - designed for relentless printing
Comprehensive bar code support - high quality reliable bar codes in the following symbologies: Code 39, EAN 8/13, UPC A/E, Postnet, Royal Mail, Interleaved 2 of 5, and PDF417
New pedestal or quietized cabinet models
For HP LineJet users the new P7000 can handle all your printing needs. View our P7000 versus HP LineJet table.
P7000ZT Series
This line printer enables printing single sheets from the first to the last line with no loss of forms.
P7000HD Series
High Definition graphics printer for use in Windows based applications and PDF printing.
|
|
|
|
|
|
Emboss or deboss metal tags using a simple character selection wheel, ideal for low volume applications
Accommodates several different tag sizes
Specified in GSA Contract #GS-25F-0043L for making military dog tags
This manually operated tag embosser is an economical option for creating small quantities of embossed or debossed metal tags. Compact and lightweight, it can be used for tabletop or portable needs. Tag sizes range from .8 x 1.2 minimum to 3.4 x 4.5 maximum.
This manually operated tag embosser is an economical option for creating small quantities of embossed or debossed metal tags. Compact and lightweight, it can be used for tabletop or portable needs. Tag sizes range from .8 x 1.2 minimum to 3.4 x 4.5 maximum.
Using the manual character selection wheel, characters are embossed one at a time. The wheel has a 60-character capacity including numbers and punctuation marks. Once the character is selected, simply pull the handle and the M10 embosses the character and automatically spaces to the right. It also features a correction device that allows you to backspace and re-emboss a character.
|
|
Machine Parameters:
1.Hot stamping areaF60 x 90 mm
2.Worktable areaF105 x 150 mm
3.Operate way:manus
4.Height adjustmentF0 - 30 mm
5.Hot stamping widthF50mm
6.PowerF110 V / 220 V / 240 V
7.Teat wattageF300 W
8.Temperature adjustmentF0-200oC
9.WeightF8.2 Kg
10.Gross WeightF9.2 Kg
11.DimensionF260 x 160 x 340 mm
12.Dimension with packageF340 x 230 x 360 mm
Advantages:
1.Front loading foil system - for easy set up.300 watt flat heating element - for efficient heating.
2.Pressure control limiter - for precise printing.
3.Horizontal sliding table - for convenient working.
4.Integral lay gauges - for accurate product placement.
5.Micro adjustable auto foil feed. 60x90mm print head.
6.Pen jig and type chase included.
Testing:
1. a stamping plate;
2. some golden foil;
3. some samples.
Product Description
H-900 is an ideal machine for specialist printers of smaller items, the hobbyist, for taking to craft fairs and pony shows or simply those on a limited budget.
|
|
MK3
- Cable, wire and component marking system X-CARD for more efficient and versatile marking on site.
- Prints various marker tags on credit card type format (Partex type PFC) accomodating also project and mounting information directly on the card.
- Project and mounting information directly on the card gives lower marking costs.
- Printing on site with PC controlled thermotransfer printer.
PFC
- Fast mounting with easy breakoff cards with precut or moulded marker tags.
- Easily detachable tags are put directly into PARTEX various tag holder systems.
- The hard tags can be rapidly mounted, before or after connecting the wires and cables.
- Easily printable in the X-Card MK3 printing machine with high production rate.
|
|
Schleuniger offers several solutions for marking, printing and labeling of wires and cables. From hotstamp marking to inkjet printing and thermal transfer printing - all integrated in automatic production lines with Schleuniger's automatic wire cutting and stripping machines.
With the PC software Cayman, all printing parameters are programmed directly in the same software where the settings of your cut & strip machine are made. Schleuniger has also implemented various customized solutions with several inkjet printers in one production line or printing with different colors on both sides of the cable / wire.
|
|
Stamping, Punching
Benefit from our wide selection of high precision tools and built-in modules for the production of:
Smooth and serrated punching for business forms, datamailers, tea bags and -labels, self-adhesive labels and price tags, ...
Contour and profile punching for corner cuts of ATB- and ATB2- tickets, boarding passes, wallets, parking tickets, security labels, smart cards, datacards, diagrams, test strips, file holes, meat tray inserts, film holes, ...
surface holes for fruit and vegetable wrapping foils, band aids, ...
Schober offers the largest spare parts inventory in Europe for:
Round, square and profile punches and dies
Crimp punches and dies
Circular knives
Perforating and cutting wheels and blades
Quick change clamping bars
Early on Schober engineers recognized the need to combine different types of material to increase the life of our tools.
Count on our consultants and send us your product sample or drawing
|
|
Spring Return Marking
For marking tools: MR1 - Serie
No. 431-08...16R+L 150506
No. 431-16...25R+L 250606
Marking types:
S = Marking vertical, with driving points between text
W = Marking horizontal, with driving points between text
|
|
BIVA
DCM has been a pioneer in the development of the narrow web concept (up to 800-mm web width). This design suits the short run markets particularly well, for example the PVC shrinkable sleeve printing
|
|
GIANT AUTO NUMBERING MACHINE
-4 DIGITS & 6 DIGITS
-NUMBERS ONLY
-GOOD FOR PRINTING ON CARTON BOXES
-LARGE LETTER SIZE
-EASY REPLACEMENT OF INK PAD
-EASY TO CARRY
|
|
|
|
Other marking and engraving techniques
