|
|
|
|
|
|
3 mm carbon steel construction. Bent with a fibre system and equipped with structural reinforces.
Weldings with electronic control of the edges and of the gaseous mixture to assure perfect waterproofing. Layout, tolerances, rims, chamfers, nominal weight and finishing grade according UNI parameters.
External anti-corrosion treatment obtained with visible anti-oil and antiacid resins, safe in compliance with ISO 3864 and CEE 77/576 - L 229 regulations and following modifications. Hot-galvanized carbon steel grate with heavy load resistant handles, put on the ?L? welded profile perimetre and ( for some models) central reinforced omega.
Each drum rack has a safety labelling for accident and pollution prevention in compliance with current, EC and national regulations (D.L.22 of 05/02/1997, D.L. 626/94, D.L. 915/82 and following modifications.)
Registration and trial testing by hydraulic test made at full load for 48 following hours at atmospheric pressure at room temperature, in compliance with legislative decree of 11/05/1999 n. 152, DPR 915 of 10/09/1982 and following modification.
SAFELY LABELING
PRODUCT IDENTIFICATION LABELING
SINGLE PACKING
OPTIONAL ITEMS UPON REQUEST:- SPECIAL COLOURS - SPECIAL RESINS - COMPANY LOGO - STAINLESS STEEL COVERING - GRIDS
|
|
- Robust tack welded steel Construction
- Exists in 2 models: for strong density and average density - Handling by lifting truck
- Double Locking
- E.C. Conforms, validated by an organization of control
Options:
- Wheels for manual displacement
- Galvanization
- Lid
|
|
Steel or Aluminium Container
Pressurized aluminium container for a helicopter engine, in accordance with the STANAG standard.
|
|
Bucket-container tilting of type BBM
Detail characteristics
- Volume 500 to 2500 liters,
- Resumption of the bucket by 3 sides,
- Control of opening per lever with double locking with latch of safety,
- Possibility of adding your share a cord or a chain for a control of the remote lever,
- Interlocking of the bucket manually by the operator,
- Nongerbable Bucket,
- Enamelled Completion blue, green or gray out of standard.
Options
- 2 fixed wheels + 2 swivelling wheels with binding polyamide,
- Lids,
- Galvanized hot,
- Stainless 304 or 316,
- Valve of draining with mechanical protector,
- Personalized Marking.
|
|
|
The ordering of swing is made starting from the seat lifting kl'. Very resistant, sheet of 3 mm for the vat standarts a metal section rigidifying it. Safety counters the nonintentional slip. Surface treatment by lacquering or galvanization.
|
|
CAR PIK pi 25 Display units - Inclineurs
Display unit inclinor 25° standard pi 25,
Maximum loading 400 kg
Loading by forklift truck
Maximum slope 25°
Self-contained equipment
Slope ordered by foot-switch
given to horizontal ordered by foot-switch with assistance by compass gas has
Slope by large or the small with dimensions one of the crate
use in loading or unloading
|
|
STANDARD INCLINEUR OF CRATE AP 45
Characteristics:
Pneumatic food 4/6 bars;
Slope of 0 with 45°;
Slope ordered by foot-switch,
Handing-over with horizontal ordered by foot-switch;
Slope large or small side towards the operator;
Bar anti-pliers finger;
Protectors back and side by scales of safety anti-shearing.
Automatic crutch of safety, in position safety constant, retractable at the time of the rise or the descent of the apparatus;
Loading with the forklift truck or stacker;
According to your needs:
Dimensions of the plate;
Height of demounting;
Color with the choice;
|
|
|
|
|
|
STANDARD RETOURNEUR OF COIL AP85
This apparatus makes it possible to pass from the rings concrete or coil yarn/steel having the same horizontal problems of axis vertical to axis or conversely;
Characteristics:
- Demounting of a pallet empties in the receptacle;
- Rotation 85° of the apparatus;
- supply and deposits with the forklift truck of an battery cell of rings horizontal axes on the receptacle out of V allowing the centering of the rings;
- Resumption of the pallet with the rings vertical axes by the forklift truck;
- Strapping of the unit to make safe transport;
Apparatus conforms to the standards THIS and the directives 89/392/CE
- Control by controlled cells car;
- Control of rotation/return rotation by push-button to maintained contact;
- Side and back Protector of safety;
- Check valves controlled electrically at exit of the cylinders,
- Mounting Feet on the ground.
According to your needs:
Dimensions of the receptacle;
Form receptacle;
Options:
Cycle automatic;
Color with the choice;
|
|
standard inclinor of crate AP80
Characteristics:
- Control of assembled/descent by push-button with maintained contact;
- Introduction of the crate by 3 sides;
- Slope large or small side towards the operator;
- Metal side Scales of safety;
- In-depth reduced front Face over a width of 819 mm in order to obtain a better ergonomics at the workstation than it is in horizontal and tilted position;
- Check valves controlled electrically at exit of the cylinders,
- Bar anti pliers fingers;
- Mounting Feet on the ground.
According to your needs:
- Dimensions of the plate;
- Color with the choice;
options:
- 1 curtain with reel of red color on the back part.
- Off-set Control.
|
|
Tilters for caissons
PCF model
The PCF caisson tilter models are particularly indicated for the picking up of raw or semi-manufactured material with manual interlocking with the functioning machines.
PCM model
The PCM caisson tilter models are equipped with wheels so that they can be moved from one place to another. The tilters have an electro-hydraulic action with an electric push button panel to go up and down.
|
|
Standard Features
• Heavy-duty construction with captured scissor rollers for maximum stability
• Superior hydraulic systems feature an integrated pump-cylinder for maximum reliability
• High quality casters and wheels for exceptional rollability
• Dual action caster brake locks both the wheel and the swivel
• Ergonomic push handle with convenien lowering control
• Lowering control automatically stops when released for added safety
• Convenient maintenance pins secure the scissor legs for inspection and maintenance
• Quality baked enamel finish provides exceptional durability and corrosion resistance
|
|
|
Use these tilters to make workers safer and more productive. When it comes to accessing parts in baskets or loads on pallets, nothing makes the job easier than these units. Presto offers models for virtually any requirement including; tilt only, lift & tilt, portable, floor level, hydraulic and pneumatic units.
|
|
|
Automatic dump truck Standard BBA "ASPI" especially designed to adapt a industielle turret of vacuum cleaner to it. Structure of the completely reinforced bucket, capacity 800 liters out of standard, lid in 2 parts with hole to fix your turret of aspiration, seal and sytème of locking of the type "Apple tree"; Resumption of the bucket on 3 sides with the lifting truck; D-enclechement of the bucket automatically by simple slope of the chechmate of your lifting truck; 2 fixed wheels, 2 wheels swivelling with brake, hanse of displacement; safety of fork allowing "to lock" your forks and thus to avoid any slip of the bucket forwards during discharge. Special achievements to measures.
|
|
AUTO TIPPING SKIP LOW-COST GIO
Low-cost - Load capacity = 800kg - Versatile - Automatic release
Capacity: 685 to 1140 litres. Automatically unlocks and tips by pressure. Lever for manual tipping.
|
|
Waste skips tilting -
Dump trucks of type "VID-BOX"
Volume 600,900 and 1200 liters
For the collection of all types of waste
Use with a device of discharge taken again on the forks of the forklift truck
options:
wheels, lid, complete sealing, double bottom, valve of draining, marking, galvanized hot, etc .......
|
|
CASE HAS WASTE
- Robust tack welded steel Construction
- The use of a swing bar Requires
- Handling by lifting truck or transpallet - Stacking and possible slinging
- E.C. Conforms, validated by an organization of control
Options:
- Wheels for manual displacement
- Galvanization
|
|
- Wire rack truss is designed with a rigid 3-point connection for maximum rigidity.
- Bulk rack beams with reinforced waterfall wire decking for maximum load capacity in
a wire deck application.
- Bulk rack beams with reinforced drop-in wire decking.
- Bulk rack beams with heavy-duty 18 gauge corrugated
- Steel deck panels.
- Versa rack shelf beams with 24 Gauge corrugated steel deck shelf.
- Wire shelf with integrated wire truss for maximum rigidity.
- Heavy duty 18 gauge solid steel shelf.
- Modular drawers come in 48 standard sizes in 200 lb. and 400 lb. capacity.
- Versarack shelf beams with drop-in wire shelf.
- Versarack shelf beams with 5/8” particleboard shelf.
|
|
An extremely versatile structure, to which a wide range of accessories can be added
A functional design that ensures it's easy to use
Part of the Rousseau solution, including Work Centers, Spider® Shelving System, Mobile and Stationary Cabinets, Multi-Drawer Cabinets, and Drawers in Shelving
45" W X 42" D X 91" H
Store up to 12 bumper covers
Can store bumper cover for small cars and trucks in the same rack
Levels are ajustable in height
Polyurethane casters do not mark floors
|
|
|
SCHNEIDER containers are reusable packaging that are designed to meet the most varied of needs and uses. The front has double-wing doors. Door opening angle 270°, end face with slot-in profiles, slot-in dimensions 50 mm to insert trays, 4-way design with all-round skids for forklifts and hand-lift trucks, stackable, etc...
|
|
|
|
|
|
From an idea to a container-system
In recent years things have changed greatly in the waste-disposal sector. Less waste is disposed and more is recycled. However recycling only makes sense from an economic and ecological point of view if the substances to be recycled are available in large and – more important - unmixed quantities. This demands the job of sorting out the waste from the individual valuable substances and placing them in special containers, which should be done directly on location. That is exactly where KLIKO containers come into their own. Container systems for dealing with waste in all sectors whether centrally or on location – no matter whether the materials are to be recycled or disposed of.
A wide range of two- and four-wheeled containers of various capacities are available to our customers.
To maintain Craemer's stringent standards, only high quality material is used for the production, whether plastics or metal.
Craemer provides a complete range of different containers for a variety of disposal systems.
The high quality of our wastebin system confirms the certification according to DIN EN 840 considering as example of our "MGB"-line.
|
|
|
|
|
|
Weber products:
Pre-sorting containers, large refuse containers, waste collection containers, refuse baskets, waste bins and mobile waste disposal containers etc.
Are suitable for various types of selective waste disposal such as paper, glass, packaging etc.
All Weber products are produced on our company premises in Haan, near Düsseldorf off our own tools using the compact injection moulding technique and in compliance with DIN 30740 / EN 840.
The containers comply with the noise protection ordinance according to the EU Directive and bear the guaranteed acoustic power (CE) mark.
All products are manufactured exclusively from new basic materials (certified 1a type goods) and are resistant to UV, cold, heat and chemicals.
The high quality standard of our products, our extensive capacities, exact scheduling and reliable service are the basis for the successful development of our company - as well as ensuring satisfied customers.
Waste containers, 1100 litres -round lid
Waste containers, 1100 litres -flat lid
Waste containers, 1000 litres -
Waste containers, 770 litres
Waste containers, 660 litres
Waste containers, 360 litres
Waste containers, 240 litres
Waste containers, 140 litres
Waste containers, 120 litres
Waste containers, 80 litres
Waste containers, 60 litres
Waste containers, 50 litres
Pre-sorting waste containers 18 litres
Pre-sorting waste containers 10 litres
|
|
All of the Engels 2-wheel containers comply with the EN 840 standards. Not only have they been TüV-approved, they are also cadmium-free and UV-resistant.
The containers are made of impact resistant plastic. The 2-wheel containers can be delivered from stock in various volumes and colour combinations.
In addition, Engels has succeeded in equipping the standard container with many options so that the range of containers for specific applications is infinite.
Containers for confidential paper or the safe collection of glass is now standard. The containers can be delivered with an indelible imprint.
|
|
|
Justrite Cease-Fire® Waste Receptacles are specially contoured to direct smoke and gas from any fire inside the container, back into the combustion area, cutting off the air supply and extinguishing flames in seconds. Cease-Fire® Receptacles provide round-the-clock protection against trash fires and are suitable for use in plants, hospitals, schools, offices and stores.
|
|
|
|
|
|
95 Gallon Universal Roll-out Cart, Model ROC-95U
Universal Roll-out Carts are designed for both automated and semi-automated collection of household waste and recyclables. Injection molded with premium quality, resilient, high-density polyethylene (HDPE) resin, Rehrig Roll-out Carts are designed to provide many years of quality service and look good at the curb in virtually any neighborhood or climate found in North America. ROC-95U Roll-out Carts have an integrally molded-in plastic catch bar.
While evaluating possible molding methods in the early 1960's, Rehrig Pacific determined that only the injection molding method possessed the technology to mold complex geometric shapes, and the ability to maintain precise tolerances with exact predictability. A further advantage is the ability to vary wall thickness strategically throughout the same part, adding strength to critical wear and load-bearing points. As a result, injection molding allows Rehrig to engineer premium product quality, performance and dependability into every product we make.
Rehrig Roll-out Carts meet ANSI Safety Standard Z245.30 and ANSI Compatibility Standard Z245.60
Capacity: 95 gallons (360 lt)
|
|
Container great volume for heavy steel 3133 waste
Is useful for storage of heavy waste
CHARACTERISTICS
References - Capacity - Height - Width - Length
CDDA -- 1100 -- 1100 -- 1420 -- 1020 -- 1360
CDDA -- 770 -- 770 -- 1255 -- 770 -- 1360
|
|
Wherever hygiene and functionality matter. Stainless steel works equipment is particularly long-lived and ensures high stability and safety, GMP-compliant, easy to clean, simple handling, functional and adapted to particular requirements...
SCHNEIDER industrial furnishings:
- Designed to meet your functional and space requirements
- Hygienic workplaces
- GMP-compliant
- Easy to clean
- High stability
- Long service life
- Simple handling
- Excellent functionality
|
|
K60B
Trash can with folding Lid and rollers D.200 mm.
L.505, A.448, h.700 mm.
KA80
Trash can with folding Lid and rollers D.200 mm.
L.505, A.448, h.930 mm.
KA120
Trash can with folding Lid and rollers D.200 mm.
L.555, A.480, h.930 mm.
KA240
Trash can with folding Lid and rollers D.200 mm.
L.740, A.580, h.1.070 mm.
KA660
Trash can with folding Lid and rollers D.200 mm.
L.1.360, A.765, h.1.235 mm.
KA1100
Trash can with folding Lid and rollers D.200 mm.
L.1.360, A.1.220, h.1.470 mm.
|
|
Urba 40 is an ergonomic and stylish container with tapering shaped body and square base.
It can be used at all types of properties, either inside or outside the home or office.
Strong handle with shaped grip is perfect for handling and opening.
Vertical handle stays in the upright position, reducing the need for bending.
Lid/handle locking mechanism reduces accidents, spillage and interference
from birds and animals with 2 lid opening and 2 lid locking positions.
Handle grip on the base makes emptying easier when the bin is inverted.
The small storage space allows for fitting the container under the sink, next to the kitchen waste caddy.
Urba 40 is suitable for any waste type sorting mainly for all recyclable dry materials (glass, paper, cans, plastic, etc.).
|
|
|
|
Skips, Large containers
