|
|
Self dicharging boat skip
The AUTOVID PB Boat Skip is designed for handling rubble, earth and other materials around a construction site. The skip is fitted with a hinged reinforced bale arm which offers three advantages over traditional circular tipping skips.
1. With the skip sitting on the ground the bale arm hinges to the rear and this, coupled with its low profile, enables easy loading.
2. When discharging, the vertical position of the skip along with its design ensures a quick and complete operation.
3. The skip can be used by the professional crane operator without the need for an assistant. The cycle of operation is very simple as the crane operator only has to lift and lower the crane hook. |
|
BOTTOM DISCHARGE SKIP WITH SIDE CHUTE
Lever operated with side chute
The most versatile skip with both centre and side discharge, to be used for a variety of site concrete pouring requirements. The side chute allows concrete to be poured into structures where access is a problem
With a fixed bale arm, the 116 GL skip makes the concrete pouring effortless and precised. |
|
MEASUREMENTS:
Height: 1460 mm.
Base: 880 x 1320 mm.
Weight: 240 Kgs.
Volume: 1200 Liters.
IT IS GIVEN WITH:
* Manual of use and instructions, as well as Declaration of Conformity CE In conformity with the Board CE 98/37.
ENDED IN:
Painted Orange Color RAL 2004. (Or another color to choosing)
OPTIONAL ACCESSORIES:
* Ended in galvanized.
* Possibility of putting wheels.
* It hooks to lift truck. |
|
A complete range specifically designed to collect and dump waste and scraps easily and safely. These containers are emptied automatically from the manufacturer of forklift truck by means of a lever: a solution that minimises operating times and eliminates the risk of accidents that one could meet with using traditional systems. All products in the range comply with the EEC Directive 89/392 and bear the EC mark.
|
|
Container of inferior opening.
Apilable that facilitates the collection, the storage and the transport of by-products non liquids (I don't stagnate) as metals, wood, cardboards, plastics, glasses, etc.…
Range for intensive use.
All type of product solid capacity models from 500 liters up to 2000 liters.
It loads from 1000kg. Up to 2500kg |
|
MEASUREMENTS:
Interior measurements: 1000 x 1000 mm.
Exterior measurements: 1305 x 1305 mm.
Exterior measurements pipes: 1140 x 1140 mm.
Height base: 300 mm.
PRINCIPAL CHARACTERISTICS:
* Capacity of load 1500 Kgrs./unit.
* Detachable and stackable.
ENDED IN:
Painted Blue color.
OPTIONAL ACCESSORIES:
* Ended in Galvanized.
* Supplement 4 gyratory wheels Diam.125 mm.
* Low support Opening.
NOTICES: Height of the props (pipes) to choosing between(among) 1000, 1200, 1500 and 2000 mm., ended in galvanized electrolytic. |
|
MEASUREMENTS:
Useful height: 900 mm.
Base: 1000 x 1200 mm.
PRINCIPAL CHARACTERISTICS:
* With half a door 50 % side 1000 mm.
* Folding and stackable.
ENDED IN:
Painted Blue Color RAL 5010.
OPTIONAL ACCESSORIES:
* Ended in Galvanized electrolytic. |
|
| The Sall folding containers, available in different models and shapes, are particularly appreciated because they are so practical. When they are closed they can be stacked one on top of the other, taking up very little room. |
|
CARGO FOLD 700
The new CARGO FOLD 700 is completely folding. With this system, in case of transport and storage of empty containers, you shall earn 63% in volume: a stack of eight folded Cargo is the same height as three open ones. Available in polypropylene or polyethylene, both very resilient and sturdy.
No metal inserts at all, Cargo Fold is completely recyclable. Feet, runners, professional hinges and locking mechanism in black colour are immediately visible, and appear very nice with the grey or green walls and base. The Cargo, completely dismountable, allows the replacement of eventually damaged parts. Every wall can be fitted with card holder for an immediate identification of the content and can be personalized with the company logo.
A range ready for everything. 24 available variants developed for every application. With flat walls for industrial goods, or grilled for fruits and vegetables. With or without folding professional door. Equipped with 4 feet, or 2 runners, or 3 runners for heavy loads.
The version for fruits and vegetables are designed with smooth grilled opening, having an internal radius, to avoid any damage at the most delicate goods. Rounded edges and corners to easy cleaning for the maximum hygiene.
The versions with folding door makes easier the manual loading / unloading operations.
|
|
080110
Specifications
Opening: Half hinged gate on 1150mm side
Mesh: mm 65x120
Stackability: 3+1
Tare weight: kg 44
Capacity: kg 1000
Finish: Bright electro zinc plate. ON REQUEST: Straw passivate or hot dip plate.
Other products available: |
|
Universal solution adapted to many type of products, the collapsible wire container permits the exposition of products on salespoint.
Castors can be adapted.
Dimensions (mm):
720 litres model
Interior width / length
795 x 1080
Exterior width / length
840 x 1145
Useful height 840
Folded height 285
300 litres model
Interior width / length
560 x 750
Exterior width / length
625 x 800
Useful height 710
Folded height 300 |
|
GEARED ROLLOVER SKIP
Laydown version
The SBC VOL skip is the right skip when flowing a concrete with a low SLUMP (up to 5 cms)
The SBC VOL Geared Rollover Skip is designed for pouring mass concrete onto shutters and also large slab areas.
The patented innovative design offers excellent accessibility where handrails and industrial scaffolding may present a problem. Gate operation is by means of a geared hand wheel which enables precise and accurate placing.
Capacities of 1200 litres and above are fitted with heavy duty reinforced bale arms.
The SBC VOL skip sits in the horizontal position on the ground for ease the filling and reverts to the vertical when in use. |
|
COLUMN SKIP WITH TI GATE & DISCHARGE PROFESSIONAL HOSE
Laydown centre dischage version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete box.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM |
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version & lateral lifting eyes
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete container.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge industrial hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM |
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Upright centre dicharge version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete case.
The pros of the TI system are the following:
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge industrial hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTREGRAL SYSTEM |
|
both standard and custommade dimensions available
Multi-Purpose professional container with handles
Made-to-order models availble on request |
|
Containers with retention for drum storage cistern of the type PPP Protec Stake
PB Protec Box
Pt Protec Tainer
For the installation of 2,4 or 8 professional drums of 220 liters or cubitainer of 1000 liters
Volume of retention 140, 440 or 1050 liters
Displacement of the PROTEC STAKE by pallet mover or forklift truck manufacturers
Support out of hot galvanized grating
Sealing tested in factory
Options:
Professional wheels, completion hot galvanization, marking, etc.... |
|
Descriptions:
- double wall thermo insulation
- easy handling
- rugged and durable
- temperature resistant to -78°C
- food safe, physiological correct and age resistant
Standard features:
- 2 fold-away handles
- stackable
- lid opening on top
- frame with wheels |
|
Olivo Cold Logistics offers a wide range of insulated containers dedicated to the transport and storage of Dry Ice.
From 55 to 600 litres, made of rotomoulded polyethylene or fiber glass,
hight insulation efficiency.
The main players in the Dry Ice Industry are using worldwide
the Olivo containers |
|
The large CRYONOMIC® containers are robust, well insulated and can store the CO2 pellets for several days.
For long term storage, 2 types of containers are available:
The CIC 465 is an extremely well isolated container for storage of a large quantity of pellets (465 l, 390 kg). minimal five days. The CIC 465 is the most successful container because of the superb isolation, the sheet metal reinforced outer walls and the integrated plastic pallet manufacturer allowing forklift handling from two sides.
The CIC 160 is a smaller dry ice container (160 l, 135 kg).
For short term storage, we offer 2 solutions:
The CFC 260 is a foldable container, useful in combination with 10 kg pellet bags (260 l, 220 kg).
The CIC 30 is a portable polystyrene box (27 l, 22 kg).
|
|
The dry ice containers are manufactured from polyethylene and are insulated with polyurethane.
The effective insulation ensures that loss of dry ice through evaporation (sublimation) is reduced to a minimum. |
|
STANDARD RETOURNEUR OF COIL AP85
This apparatus makes it possible to pass from the rings concrete or coil yarn/steel having the same horizontal problems of axis vertical to axis or conversely;
Characteristics:
- Demounting of a pallet empties in the receptacle;
- Rotation 85° of the apparatus;
- supply and deposits with the forklift truck manufacturers of an industrial battery cell of rings horizontal axes on the receptacle out of V allowing the centering of the rings;
- Resumption of the pallet with the rings vertical axes by the forklift truck;
- Strapping of the unit to make safe transport;
Apparatus conforms to the standards THIS and the directives 89/392/CE
- Control by controlled cells car;
- Control of rotation/return rotation by push-button to maintained contact;
- Side and back Protector of safety;
- Check faucets controlled electrically at exit of the cylinders,
- Mounting Feet on the ground.
According to your needs:
Dimensions of the receptacle;
Form receptacle;
Options:
Cycle automatic;
Color with the choice; |
|
standard inclinor of industrial crate AP80
Characteristics:
- Control of assembled/descent by push-button with maintained contact;
- Introduction of the crate by 3 sides;
- Slope large or small side towards the operator;
- Metal side Professional scales of safety;
- In-depth reduced front Face over a width of 819 mm in order to obtain a better ergonomics at the professional workstation than it is in horizontal and tilted position;
- Non return valves controlled electrically at exit of the cylinders,
- Bar anti professional pliers fingers;
- Mounting Feet on the ground.
According to your needs:
- Dimensions of the plate;
- Color with the choice;
options:
- 1 curtain with professional reel of red color on the back part.
- Off-set Control. |
|
CAR PIK pi 25 Display units - Inclineurs
Display unit inclinor 25° standard pi 25,
Maximum loading 400 kg
Loading by forklift truck truck
Maximum slope 25°
Self-contained equipment
Slope ordered by foot-switch
given to horizontal ordered by foot-switch with assistance by compass gas has
Slope by large or the small with dimensions one of the industrial crate
use in loading or unloading |
|
STANDARD INCLINEUR OF INDUSTRIAL CRATE AP 45
Characteristics:
Pneumatic food 4/6 bars;
Slope of 0 with 45°;
Slope ordered by foot-switch,
Handing-over with horizontal ordered by foot-switch;
Slope large or small side towards the operator;
Bar anti-pliers finger;
Protectors back and side by professional scales of safety anti-shearing.
Automatic crutch of safety, in position safety constant, retractable at the time of the rise or the descent of the apparatus;
Loading with the forklift truck truck or stacker;
According to your needs:
Dimensions of the plate;
Height of demounting;
Color with the choice; |
|
CARGOPALLET 300, 600 and 1100 PLUS
Quality and resistance on the large professional scale. The Cargopallet collection is designed to cope with large loads and has two fundamental characteristics – resistance and non-deformability – that derive from the reinforcement pilasters in the bulkheads and the well-ribbed base.
Made of polyolefin resins, Cargopallet containers are inert to acids, hydrocarbons, alkalis and solvents.
Ideal for the textiles, pharmaceuticals, metallurgical, rubber treatment and plastics industries. It can be stacked and fork-lifted; available with or without professional wheels. Easy to clean, it does not absorb smells or damp and it can be stored in the open.
Fitted with feet, runners or wheels, it can be shifted with a transpallet or a supplier of forklift truck.
CARGOPALLET 600 PLUS OPEN: this version with a tip-up flap makes filling, emptying and cleaning even easier.
CARGOPALLET 1100 PLUS: not suitable for liquids. Also available for foodstuffs. Fitted with feet or runners.
CARGOPALLET 600 PLUS LIQUID LINER: this version is fitted with a special triple polyethylene liner. The liner is complete with filling and empting 2” cocks. The liner is approved for food, and can be used for water, wine, milk, vegetable and animal professional oils and greases, paint, professional ink, glue, cosmeticians, pharmaceuticals.
|
|
This product is adapted to heavy and intensive handlings. The structure is reinforced to ensure robustness and longevity of the container.
It allows the protector, the maintenance and the total visibility of your products.
The container exists in various dimensions, with or without folding door.
Cast solid steel structure. Preparing by a netting with welded mesh of 50x50 mm in professional yarn of diam 4mm.
Base reinforced with welded sheet metal covering.
Catch on 4 faces.
Stacking 4/1
Completion blue RAL 5019 |
|
|
|
Skips, Large containers
