{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.defLight}}
{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.defLight}}
{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
cleaning nozzle / blow-off / air / stainless steel
cleaning nozzle
303SS

EXAIR’s new 303SS Air Jets provide reliable and efficient blowoff and cleaning within corrosive, high temperature, or washdown environments. These 1/8 NPT Stainless Steel Air Jets replace open tubes and pipe nipples on parts cleaning, ...

See the other products
EXAIR Corporation
cleaning nozzle / cooling / for drying / flat spray
cleaning nozzle

Orifice diameter: 0.25 in

The Super Air Nozzle which is an award winning product introduced by EXAIR, provides a high thrust, concentrated stream of high velocity airflow for blow off, cooling, drying and cleaning applications available in aluminium or stainless ...

See the other products
EXAIR Corporation
cleaning nozzle / cooling / for drying / flat spray
cleaning nozzle

Orifice diameter: 1 in

The 1" Stainless Steel Flat Super Air Nozzle™ from EXAIR boasts a unique design that makes it suitable for use in tight corners and spaces, since it produces a flat and wide inch-long (25mm) airstream. Once this highly efficient nozzle ...

See the other products
EXAIR Corporation
spraying nozzle / cleaning / full-cone / for liquids
spraying nozzle
BV/BW series

Orifice diameter: 0.13 in - 0.5 in

BV BW full cone nozzle is a two-piece nozzles with a 90° elbow coupling that produces a mist spray. Their special design with X-vane breaks the liquid into fine droplets and allows an easy cleaning. They may be supplied with male or female ...

See the other products
PNR
cleaning nozzle / washing / for water / PVDF
cleaning nozzle
UBE series

These devices, with monoaxial rotation, are particularly suitable when you need a high impact wash using small quantities of water. On the rotating head there are three nozzles with fan jet that offer an extremely uniform and high impact ...

See the other products
PNR
cleaning nozzle / for water / industrial / for tanks
cleaning nozzle
UBT

Orifice diameter: 4.5, 6 mm

The UBT series tank wash heads are very sophisticated devices, designed with a robust structure and constructed with the latest technology to allow for high performance and providing excellent disinfection after each wash cycle. These ...

See the other products
PNR
transfer hose / for chemical products / high-temperature / for chemical applications
transfer hose
Versilon™ FEP

Inner diameter: 1.59 mm - 22.23 mm
Outer diameter: 3.18 mm - 25.4 mm
Pressure: 2,600 psi

The physical and chemical properties of FEP fluoropolymer tubing makes it ideal for various applications. Not only is it able to withstand extreme heat, it is also resistant to low croygenic temperatures. This chemically inert tubing ...

cleaning nozzle / air / screw-in / flexible
cleaning nozzle
1200BSP

Orifice diameter: 0.12 in

Model 1200BSP consumes 736 SLPM at 6.9 Bar. The nozzle Models 1200BSP and 1200SS provide fully adjustable thrust performance. They feature a threaded-end and are compatible to use with a 12” positionable hose when used in conjuction ...

See the other products
ITW Vortec
cleaning nozzle / air / aluminum / orientable
cleaning nozzle
1200SSBSP

Orifice diameter: 0.13 in

The 1200BSP and 1200SS thread-end nozzle can be used together with a 12 hose that can be positioned by specifying 1204EBSP Flexible Shaft Extension. The nozzle can be adjusted easily and can be dismantled for cleaning purposes. The ...

See the other products
ITW Vortec
cooling nozzle / cleaning / for drying / air
cooling nozzle
1201

Orifice diameter: 0.25 in

The nozzles are available in in low or high thrust versions configurations of threaded or pre-mounted. The energy-saving jet or nozzle are finds application in cooling, cleaning, drying or parts movement.

See the other products
ITW Vortec
cleaning nozzle / cooling / blow-off / for drying
cleaning nozzle
209L

SILVENT 209 L is part of a new generation of patented Laval nozzles. It is a refinement of Silvent’s 208 and 209 nozzle series and represents an entirely new phase in blowing technology. The effect is achieved by surrounding a core jet ...

See the other products
SILVENT
cleaning nozzle / cooling / blow-off / for drying
cleaning nozzle
MJ4

Orifice diameter: 2 mm

SILVENT MJ4: micro-nozzle of stainless steel with central hole surrounded by slots. Generates a concentrated air stream while limiting both sound level and air consumption to a minimum. Small dimensions make this nozzle suitable for incorporation ...

See the other products
SILVENT
cleaning nozzle / cooling / blow-off / for drying
cleaning nozzle
011

SILVENT 011: a robust stainless steel nozzle. Stainless steel is necessary in applications involving e.g. high ambient temperatures, the food processing industry, or intensive mechanical nozzle wear. Noise level is halved and energy savings ...

See the other products
SILVENT
dry ice production machine
dry ice production machine
ICM series

The CM series, manufactured by KW®, is a dry ice production machine tailored out of a stainless steel material. This series is equipped with an isolated polyurethane deposit and is available in two refrigeration versions, water and air. The ...

cleaning nozzle / cooling / flat spray / stainless steel
cleaning nozzle
Swepro P-B-FFN-1/4-316-30-1

swepro P-B-FFN-1/4-316-30-1 - The swepro pro series flat fan nozzle, made from corrosion-resistant 1.4404 stainless steel, is suitable for continuous use in all industry sectors. Applications for the flat fan nozzle are cleaning, cooling, ...

See the other products
Swedex GmbH Industrieprodukte
cleaning nozzle / cooling / flat spray / stainless steel
cleaning nozzle
Swepro B-B-FFN-1/4-303-30-1

swepro B-B-FFN-1/4-303-30-1 - The swepro flat fan nozzle, made from 1.4305 stainless steel, is suitable for continuous use in all industry sectors. Applications for the flat fan nozzle are cleaning, cooling, coating and wetting processes. ...

See the other products
Swedex GmbH Industrieprodukte
cleaning nozzle / cooling / flat spray / brass
cleaning nozzle
Swepro B-B-FFN-1/4-B-30-1

swepro B-B-FFN-1/4-B-30-1 - The swepro flat fan nozzle, made from brass, is suitable for continuous use in all industry sectors. Applications for the flat fan nozzle are cleaning, cooling, coating and wetting processes. One advantage ...

See the other products
Swedex GmbH Industrieprodukte
dry ice production machine
dry ice production machine
Airline

For the majority of airline catering companies, the ‘cold chain’ accounts for up to 30% of non-food costs. Money literally disappears as dry ice must be ordered in advance, sublimates during transport or is thrown out due to quality. Dry ...

See the other products
Cold Jet
dry ice blasting nozzle
dry ice blasting nozzle
xxxV series

With patented MERN technology and new variable fragmenting technology you have the power to control aggression downstream of the nozzle throat for a full range of performance with maximum effectiveness - the most ever from a single nozzle.

See the other products
Cold Jet
dry ice blasting nozzle / air / low-pressure
dry ice blasting nozzle
3xx series

Full pressure nozzles with the maximum amount of agression available. Ideal for low-flow and low-pressure air systems. The longer the nozzle length, the more aggressive the blasting. The blast swath width determines the ice distribution ...

See the other products
Cold Jet
plasma cleaning machine / automatic / process / immersion
plasma cleaning machine
Tetra 150-LF-PC

Special plasma system Tetra 150-LF-PC Technical data: Switch cabinet: W 1000 mm, H 2100 mm, D 1000 mm Chamber: W 400 mm, H 600 mm, D 625 mm Chamber volume: approx. 150 litres Gas supply: 2 gas channels via MFCs Generator: ...

plasma cleaning machine / automatic / process / spray
plasma cleaning machine
Tetra 210-LF-PC

Special plasma system Tetra 210-LF-PC Technical data: Switch cabinet: W 1560 mm, H 2350 mm, D 1860 mm Chamber: W 1000 mm, H 200 mm, D 1400 mm Chamber volume: approx. 210 litres Gas supply: 2 gas channels via MFCs Generator: ...

plasma cleaning machine / automatic / process / spray
plasma cleaning machine
Tetra 12 600-LF-PC

Special plasma system Tetra 12 600-LF-PC Technical data: Switch cabinet: W 1200 mm, H 2200 mm, D 800 mm Chamber: W 2400 mm, H 2100 mm, D 2500 mm Chamber volume: approx. 12,600 litres Gas supply: 2 gas channels via ...

cleaning nozzle / multi-jet / for water / for special applications
cleaning nozzle
SA

The new nozzle with a diameter of 12 mm is designed to hydraulically clean small drain pipes in excess of 19mm bore, regardless of pipe routing or configuration. It can spin up to 9’500 rpm at 100 Bar with an output of 14.5 litres/min. ...

cleaning nozzle / blow-off / flat spray / compressed air
cleaning nozzle

The Flat ionizing air nozzle is used to clean and neutralize electrostatically charged surfaces. The use of compressed air allows awkward places to be neutralized and cleaned as well. Connected to a Simco power unit, the ionizing air ...

cleaning nozzle / air / flexible
cleaning nozzle
BW

Simco's BW Series is part of the company's product line of ionizing air nozzles. Models of the series are designed and manufactured for applications that involve neutralizing and cleaning small bottles in the inside. They are available ...

blow-off nozzle / for cleaning / compressed air / stainless steel
blow-off nozzle
Nex Flow 47004-316L

Orifice diameter: 4 mm - 6 mm

Nex Flow™ Air Nozzles Conserve compressed air and half noise levels while meeting OSHA standards. Wide range of compressed air nozzles. Our air nozzles substitute open pipes of 2 mm to 25 mm allowing dramatic energy savings and a return ...

chemical product hose / for gas / for steam / conveying
chemical product hose
BW656 series

ANACONDA butt welded corrugated stainless steel hose type BW656 is designed for conveying chemicals, gases, steam, etc. It is suitable for use under full vacuum and has a temperature range of cryogenic to ca. +600°C*. Type BW656 is designed ...

See the other products
Anamet Europe
chemical product hose / for gas / for steam / conveying
chemical product hose
BW756 series

Inner diameter: 32 mm - 350 mm
Outer diameter: 47.8 mm - 383 mm
Pressure: 0.2 bar - 55 bar

Anaconda butt welded corrugated stainless steel hose type BW756 is designed for conveying chemicals, gases, steam, etc. It is suitable for use under full vacuum and has a temperature range of cryogenic to ca. +600°C*. Type BW756 will ...

See the other products
Anamet Europe
chemical product hose / for gas / for steam / conveying
chemical product hose
BW856 series

Temperature: 0 °C - 600 °C

Anaconda butt welded corrugated stainless steel hose type BW856 is designed for conveying chemicals, gases, steam, etc. It is suitable for use under full vacuum and as a temperature range of cryogenic to ca. +600°C*. Type BW856 engineered ...

See the other products
Anamet Europe
thermal cleaning system / die / ultrasonic / solvent
thermal cleaning system
CHC 1000

Features: Batch size: 112 lenses (up to 90 diameter) Per Hour: 1,120 (lenses) x2 Robotic Transporter Systems Three ultrasonic cleaning (detergent) plus three stages plus ultrasonic rinsing. All clean and rinse stages are fitted ...

cleaning nozzle / washing / for liquids / stainless steel
cleaning nozzle
LSD

LSD clip/weld The LSD rotating heads are built in AISI 316 L stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. The rotating part has the peculiarity of not having coupling ...

See the other products
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
cleaning nozzle / washing / for liquids / stainless steel
cleaning nozzle
LSD

LSD Thread The A_LSD rotating heads are built in AISI 316 stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. The rotating part has the peculiarity of not having coupling lines ...

See the other products
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
cleaning nozzle / washing / straight jet / for liquids
cleaning nozzle
LSE

Building: The A_LSE48 rotating heads are built in AISI 316 stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. Their reduced diameter allows the use, in the case where there are ...

See the other products
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
pillar Flame Treatment Unit
pillar Flame Treatment Unit
GAS FLAMING C

To print on certain surfaces (in particular, plastics such as polypropylene, polyethylene and poly-acetate) may be necessary to subject the pieces, before (pre-treatment) or after printing (post-treatment), to a flaming process. This ...

belt conveyor Flame Treatment Unit
belt conveyor Flame Treatment Unit
GAS FLAMING N

To print on certain surfaces (in particular, plastics such as polypropylene, polyethylene and poly-acetate) may be necessary to subject the pieces, before (pre-treatment) or after printing (post-treatment), to a flaming process. This ...

cleaning nozzle / multi-jet / tungsten carbide / for the steel industry
cleaning nozzle

Nozzles are widely used for cleaning, preparation of steel & other surfaces prior to painting or finishing applications, from small delicate parts, ships hulls, airplane surfaces, dental parts, plastic parts, fiberglass structures, gears, ...

cleaning nozzle / multidrop / stainless steel / brass
cleaning nozzle
CL7 series

The CL7 is a cleaning spray equipment that provides a cone pray pattern. It is equipped with various spray nozzles that can be installed to produce non-standard spray designs. The device has a cluster that is equipped with 7 removable ...

See the other products
DELAVAN France
cleaning nozzle / multi-jet / stainless steel / brass
cleaning nozzle
DWN 19 series

SPRAY CHARACTERISTICS -Produces a solid cone type spray pattern from a multiple orifice body. -Relatively uniform distribution at all pressures. -Atomisation is finer than with a single nozzle of the same capacity. -Available in a range ...

See the other products
DELAVAN France
cleaning nozzle / multi-jet / stainless steel / brass
cleaning nozzle
KN9 series

SPRAY CHARACTERISTICS -Produces a solid cone type spray pattern from a multiple orifice body. -Relatively uniform distribution at all pressures, 360° coverage. -Atomisation is finer than with a single nozzle of the same capacity. -Available ...

See the other products
DELAVAN France
cleaning nozzle / spray / flat spray / for liquids
cleaning nozzle
CVVP series

FEATURES • Flat spray pattern with stable distribution having tapered spray pattern edges. • Taking shape of thin coin, this nozzle does not protrude out of pipe-surface, which makes it easy to accommodate nozzle headers ...

See the other products
H. Ikeuchi & Co., Ltd.
washing nozzle / cleaning / spray / flat spray
washing nozzle
VE/VEP series

Orifice diameter: 0.13 in - 0.5 in

FEATURES: • Produce even flat spray pattern with uniform distribution across the entire spray area. • Even spray impulse across the entire spray area. MATERIALS: • Brass / Stainless steel / PVDF (Polyvinylidene fluoride) ...

See the other products
H. Ikeuchi & Co., Ltd.
cleaning nozzle / spray / flat spray / for liquids
cleaning nozzle
VNP series

Orifice diameter: 0.13 in

FEATURES: • • Flat spray pattern with uniform distribution throughout pattern area. •• Small 1/8" size pipe connection size designed for high pressure cleaning. MATERIALS: • • Brass / Stainless steel (with ceramic ...

See the other products
H. Ikeuchi & Co., Ltd.
cleaning nozzle / flat spray / ceramic / compact
cleaning nozzle
AD 90

Orifice diameter: 1 mm - 4 mm

Anti-drift flat spray nozzles AD 90 Low-drift flat spray nozzle. Advantages „„99/95/90/75/50 % drift reduction depending on nozzle size, pressure and country Fine droplets at higher pressure Pre-atomizer can be removed without tools ...

See the other products
Lechler
cleaning nozzle / flat spray / for liquids / stainless steel
cleaning nozzle

Rotating cleaning nozzles „MicroWhirly“ and „ContiCleaner“ with slide bearing Rotating cleaning head with flat spray nozzles and slide bearings Advantages Effective rotating cleaning by means of flat spray nozzles Optimum internal ...

See the other products
Lechler
cleaning nozzle / flat spray / for liquids / stainless steel
cleaning nozzle

Rotating cleaning nozzles, „CanCleaner“ and „MiniWhirly“, ball bearing-mounted Rotating cleaning head with flat spray nozzles and ball bearings.

See the other products
Lechler
cleaning nozzle / straight jet / for liquids / for tanks
cleaning nozzle

The design of the cleaning heads is characterized by minimized components and reduced dead space. The performance of the cleaners is perfectly adjusted to the cleaning requirements with jet geometries and nozzle number and rotation speed ...

spray nozzle / cleaning / washing / for water
spray nozzle
HC series

HydroClaw Nozzles Clog-Resistant Tank Washing Nozzles HydroClaw clog-resistant stationary spray nozzle for quick, efficient tank cleaning The unique, patent-pending, clog-resistant design quickly cleans tanks and eliminates maintenance ...

See the other products
BETE
cleaning nozzle / multi-jet / for water / industrial
cleaning nozzle

Alfa Laval MultiJet Rotary Jet Head tank-cleaning range provide exceptional cleanability, better end-product quality, greater overall output and reduced operating costs. They are designed for industrial application, such as paint, steel, ...

See the other products
Alfa Laval
cleaning nozzle / multi-jet / for water / stainless steel
cleaning nozzle
1030xSC series

The Bigfoot Nozzle utilizes Optimized 3D Hydro Mechanics to convert the water coming from a pressurized sewer hose into unrivaled cleaning power. The roll over bars allow the nozzle to upright itself in the line. All of the rear jets ...

See the other products
INTERSEWER UG (haftungsbeschränkt)
cleaning nozzle / compressed air / compact / rotating
cleaning nozzle
ST80100025

25m hose with a shut-off valve and claw coupling. This is a 1 inch (25mm) compressed air nozzle equipped with a very powerful rotating WhipStream. The WhipStream rotates with 10,000-12,000rpm and the impact of the compressed airflow ...

See the other products
Aquila Triventek A/S