- Industrial machines and equipment >
- Surface Treatment Equipment >
- Other surface treatment equipment
Other surface treatment equipment
Better than Zirconium in every respect (better surface finishing、longer using life and Cost-effective). Suitable for the following materials:Carbon Steel、High-alloyed steel、Stainless Steel、Chrome and Chrome、Cast iron、Nickel Steel、High ...
DanYang Rigo Abrasives Co., Ltd.
Material:Premium Zirconia Suitable forhard materials、stainless steels, etc. Better in surface finishing. Used for:Carbon Steel、 Alloyed Steels、Stainless steel、 Sheet metal、 Heat treated steels、 Cast iron、High speed and tool steels ...
DanYang Rigo Abrasives Co., Ltd.
Material Available: Alumium Oxide, Calcine Alumium Oxide, Zirconium Oxide,Ceramic Oxide,Silicon Carbide Grit Size Available: #40.#60.#80.#100.#120
DanYang Rigo Abrasives Co., Ltd.
Neodymiμm-doped yttriμm Aluminum garnet (nd:yag) laser crystal, its superior basic properties make it often used in near and far infrared solid-state lasers and their frequency doubling and frequency tripping, in scientific research, ...
zoolied inc.
Nd:YAG laser crystal has high gain and very low losses at 1064 nm. Optimised thermal conductivity and thermal shock characteristics make it suitable to produce stable and high characteristics reachable lasers. Zoolied provides Customized ...
zoolied inc.
Zoolied offers D7*100 D7*115 D7*120 D7*130 D7*140 D7*145mm 1064nm Yag Laser Crystal. Neodymiμm-doped yttriμm Aluminum garnet (nd:yag) laser crystal, its superior basic properties make it often used in near and far infrared solid-state ...
zoolied inc.
Belmeko is producer of pretreatment tunnels, single and multi-chamber spraying systems and bath series; all produced in its own workshop in Oostkamp, Belgium. The tunnels can be made of stainless steel or polypropylene. The pretreatment ...
Single NV diamond (SNV-1) contains single NV centers which dispersedly distribute throughout the diamond. Nitrogen-Vacancy uniformly distributed over the plate. NV density below than 0.00005ppb. The single NV centers are manufactured ...
HaiNan Neocrystech Co., Ltd
Single NV diamond (SNV-1) contains single NV centers which dispersedly distribute throughout the diamond. Nitrogen-Vacancy uniformly distributed over the plate. NV density below than 0.00005ppb. The single NV centers are manufactured ...
HaiNan Neocrystech Co., Ltd
Single NV diamond (SNV-1) contains single NV centers which dispersedly distribute throughout the diamond. Nitrogen-Vacancy uniformly distributed over the plate. NV density below than 0.00005ppb. The single NV centers are manufactured ...
HaiNan Neocrystech Co., Ltd
Rotational speed: 2,000 rpm - 35,000 rpm
Power: 30 W
Minitor
Rotational speed: 1,000 rpm - 35,000 rpm
Power: 50 W
The Neo Digit 1 micromotor controller unit is a rugged all around power unit which offers the latest in technology. It offer many safety features as well as a digital display. It is a very versatile unit that accepts either straight ...
Bipol
Rotational speed: 35,000 rpm
Power: 50 W
Set composed of a control Unit Neo Digit 1, one handpiece PHP-Eco 35.000 rpm or PHP-Pro 40.000 rpm and one foot pedal. Continuous speed adjustment with digital display and forward/reverse direction switch. High torque. Ideal for universal ...
Bipol
Rotational speed: 0 rpm - 55,000 rpm
Power: 0 W - 50 W
Hybrid deburring and polishing set combining asynchronous technology (brushless motors) with traditional technology (brush type motors). The technology makes it possible to use handpieces with minimum maintenance and a longer engine life ...
Bipol
Rotational speed: 20,000 rpm
Power: 0.7 kW
Our small lightweight pneumatic die grinder has a collet for usual grinding consumables. Energy source: Pneumatic Operating pressure: 6 bar Actuation: Lever valve Tool holder: Collet dia. 8 mm Exhaust: Front
Spitznas Maschinenfabrik GmbH
Rotational speed: 7,000 rpm
Power: 1.8 kW
This powerful hydraulic grinder with high removal rate, also for underwater work. The maximum diameter of the grinding disc is 200 mm. Energy source: Hydraulic Operating pressure: 140 bar Actuation: Lever valve Tool holder: ...
Spitznas Maschinenfabrik GmbH
Rotational speed: 10,000 rpm
Power: 1,250 kW
Diameter: 6 mm
The ideal pneumatic axial grinder at speeds up to 10,000 rpm, with high removal performance. Tool holder for collet dia. 6 mm. Energy source: Pneumatic Operating pressure: 6 bar Actuation: Lever valve Tool holder: for collet dia. 6 mm
Spitznas Maschinenfabrik GmbH
Flap Discs of very first quality, with single or double flap and support in nylon or fiberglass. Abrasive material with Zirconium or with Corundum of different grits. Applications: Ideal for finishing the surfaces, for clean weldings ...
DT are cut discs SIT Tecnospazzole in aluminium oxide or in silicon carbide while DS are deburring discs in aluminium oxide. Applications: DT: Cut discs for steel, iron, aluminum e marble. DS: Deburring discs for iron.
Spray Pre-Treatment Systems Spray surface pretreatment lines are ideal for automated powder coating systems where the product quantity is high and where dipping type pretreatment does not meet the demand. The work pieces moving ...
Polyurethane pad for polishing and sanding for Ø150 mm wheels. Item no.: 5-170-0004
August Handel GmbH - CARFIT
Diameter: 150 mm
Color Net Disc – mesh abrasive disc of 150 mm diameter are designed for dry sanding of such materials as putties, fillers, finish coatings, synthetic materials, plastic sand etc. Discs Item no.: 6-700-0080, grit P80, 50 pcs. Item no.: ...
August Handel GmbH - CARFIT
Diameter: 150 mm
Red Film series plastic-based abrasive discs for wet and dry machine sanding. Due to special corundum grain Red film materials provide enhanced performance, which means faster sanding, high quality of a sanded surface and durability. Discs Item ...
August Handel GmbH - CARFIT
Rotational speed: 12,000 rpm - 13,500 rpm
Power: 1.3 kW
Diameter: 101 mm - 125 mm
High-performance 1.7Hp motor delivers maximum power Quick change spindle lock for fast and easy abrasive changes Quieter operation with rear exhaust overhose standard Ergonomic, anti-vibration handle for increased comfort ...
Cleco Tools
Rotational speed: 2,800 rpm - 11,000 rpm
Power: 1,750 W
- Easy to remove the Oxide film, deep scratch, rust on the laser and plasma cutting on the hole, curve, and straight of the plate. - Removing or deburring films such as zinc plating and stainless steel. It is possible to work in various ...
Daesunggt co.,Ltd
Power: 1,080 W
If do not use the any guide alongside of machine, it becomes a reason of the product breakage or injured operator by the repulsive force of cutting Height Adjustment One-touch Spline Controller - Adjustment Increments Minimum 0.1mm ...
Daesunggt co.,Ltd
Power: 1,700 W
The GTB -2100-S has a one-touch spline controller for height adjustment. It can be adjusted in minimum increments of 0.1 mm steps. The milling units consist of a single facemill cutter head. It is used with steel, non-ferrous metals and ...
Daesunggt co.,Ltd
Smoothed polishing-pad Fine cut SC-55 Smoothed polishing-pad with reduced velour,.
Corcos Srl
Application of laboratory testing oven: High Temperature Vacuum Oven is widely used for heating treatment of metal materials in low vacuum, recursive, protective atmosphere, also can be used for heating treatment of special materials, ...
Rotational speed: 0 rpm - 14,600 rpm
Diameter: 3 in
Features: * The cylinder is durable and longer lifespan. * Increase gear strength, consequently the abrasive life is improved
Sumake Industrial Co., Ltd.
Pre-treatment equipment is always designed after the specific demands for every project. All technical and environmental aspects are considered. Solutions for most chemical processes on the market can be supplied.
In Dip Tank Lines parts are loaded inside baskets and treated by dipping them inside each process tank for prefixed period of time. Ironphosphate and Zincophosphate surface treatment processes can be done in dipping lines. Materials ...
Chamber Pre-treatment Lines Chamber Pre-Treatment Lines are compact systems in which several processes can be made in one unit, therefore occupying much less space. It has made for an alternative to classical spray cleaning lines ...
Roll Test - Sound Insulation Cabins These are the cabins in the automotive sector where the final controls of the vehicles are made. The sound generated by the vehicle operating at high speeds in the cabin absorbed there. Sound leak ...
The sanding flap discs are used for deburring, polishing, and grinding welds and rough surfaces. This product is an excellent alternative for the fibre disc or rough grinding disc. The flap disc is more economical, quieter and vibrates ...
Danpoort International Abrasives B.V.
Danpoort offers a wide variety of sanding discs for dry sanding many surfaces where quality of finish is of primary importance. The choice of backing type and attachment option generally guides which product is best suited to the application. Various ...
Danpoort International Abrasives B.V.
Also known as sandpaper discs, this is a type of orbital sanding disc made for easy attachment and removal to your power tools like an orbital sander, for example. One side has an abrasive material attached to it while the reverse has ...
Danpoort International Abrasives B.V.
Engine Cylinder Hone Brush This brush can be used to remove burrs from cross drilled holes leaving a clean, radiused intersection. Due to its unique shape, hone brush can be used online in machine tool applications or offline as a secondary ...
Aluminum Oxide Flex Hone For Surface Finishing The feature of aluminum oxide is ideal for working on materials such as aluminum, brass, bronze or other non ferrous. It polish inner holes evenly (step or wave-shaped inner holes) to ...
Rotational speed: 30,000 rpm
Power: 220 W
Diameter: 6 mm
- It can be used for drilling, weld breaking, smoothing the sharp edges as well as for deburring, polishing, grinding, grooving, removing material, sanding etc - Double bearing system inside to ensure longer service life - Body and handle ...
Rotational speed: 26,000 rpm
Power: 0.5 ch
APACH Industrial Co., Ltd.
Rotational speed: 20,000 rpm
Power: 0.5 ch
APACH Industrial Co., Ltd.
Rotational speed: 20,000 rpm
Power: 1 ch
APACH Industrial Co., Ltd.
Diameter: 115 mm
Increased user safety thanks to the paddle switch: switches off immediately upon release Equipped auto mode function for automatic speed regualtion due to load Kickback protection for high user safety Equipped soft start for a reduced ...
Mounted wheel Bonding: Metal bonding Work Material: hard brittle materials For machining of hard brittle materials, the MF560 bond has hard and brittle properties and features an excellent biting property and moderate grain changing ...
Electroplated mounted wheel for chamfering glass Bonding : Electroplated Work materials : chamfering glass We can also suggest how to control the amount of abrasive grains embedded and how to further increase the service life. With ...
Rotational speed: 5,000 rpm
Power: 60 W
PORTABLE TUNGSTEN ELECTRODE GRINDER GRINDS ELECTRODES FROM 1.6 TO 5.0MM 0 to 60 degree angle adjustment range. CE certificate Specification •Voltage: AC220V •Frequency: 50-60HZ •Power: 60W •Disc Diameter: 90mm •Disc rotating ...
GBC UK
Acetone Dipping Machine The Acetone Dipping Machine is a semi-automatic equipment to treat acetate products in acetone vapors. Respectful of anti-pollution and safety norms and respectful of operator’s health. All steps of the working ...
Automatic Flux Treatment Machine The model referred to as “AUTOFLUX” is an automatic device, ideal for the treatment of spectacle frames in metal by immersion in bath of “FLUX” and subsequent hot air drying. Respectful of anti-pollution ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining