|
|
10EaZy sound measuring system for Professional pcs.
10EaZy & RogaDAQ2 15905-5, is a new and high-grade intuitive sound measuring system for PCs, which can be served. It combines one in singular way control surface which can be used simply and intuitively as well as a measuring system, which become in its entirety fair the requirements for measurements in accordance with International Electronical Commission 61672-1; the RogaDAQ2 PC sound measuring system is inserted for the measurement of the noise at the professional workstation after 2003 European Union directive 10/EC as well as DIN 15905-5. The standard is valid for electroacoustic acoustic irradiation technology in places of event.... e.g. in discotheques, cinemas, concert halls, general-purpose and halls, areas for shows, Events, cabarets and Varietes, studio for sound broadcasting and television, theaters as well as in connection with play and scene surfaces in free light stages, open air meetings and with fixed removals or city celebrations. Inclusive measuring professional microphone class 2. |
|
The OROS 3-series industrial analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Get accurate and comprehensive results representing noise phenomena within a portable instrument is what OROS 3-Series offers to acoustics specialists. The 1/n octave band analyzer and the overall level counting (OVA) deliver data complying with international standards within class 1 requirements. Take benefit from the OROS 3-Series mobility for your industrial acoustic measurements and improve your efficiency.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analysis, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data industrial recorder packaged in portable and professional units.
|
|
| LMS provides a vehicle-based acquisition system for noise emission evaluation of vehicles against predefined targets, legislative standards like the ISO 362, SAE J1470 and upcoming standards with a strong focus on enabeling high channel counts for parallel engineering analysis measurements. Addionally, the acquisition and analysis tools for in-depth engineering analysis of noise emissions enable the user to design for noise emission levels lower then ever and achieving attractive brand sound characteristics |
|
| ROGA-Instruments is used for measuring sound , oscillations , and operation oscillations. Furthermore it is an important part of medical technology and professional test system technology . It makes possible to record and analyze orders, structures, and sound pressure. |
|
| Pimento can handle most tasks in general manufacturer of data acquisition & INDUSTRIAL DSP, rotating machinery, structural analysis and acoustics, including sound power and sound intensity measurements. It comes in a highly portable unit that responds to your needs just as conveniently at home, in the lab or in the field. |
|
Portable Manufacturers of data acquisition Fft analyzer Soundcard. Two high quality, high speed, IEPE simultaneous sampling inputs, 24 bit ADC, for NVH measurements.
RogaDAQ2 datalogger is a high performance portable Data Acquisition Device. It features two high quality, high speed, 24 bit simultaneous sampling inputs, 4 auxiliary inputs, two configurable tacho-inputs and additional digital I/Os.
The main inputs of the RogaDAQ2 are simultaneously sampled precision analog inputs for recording static and dynamic signals. Sampling rates up to 48 kHz at 24 bit resolution are supported. Each channel features instrumentation quality preamplifiers with AC or DC coupling and constant current sensor supply for directly supporting IEPE-type sensors. In addition, the RogaDAQ2 is equipped two highly flexible RPM inputs featuring individual pulse width counters, yielding RPM and phase relative to the main channels. The trigger levels are programmable between +/-25 Volts. In a complex measurement application it is often necessary to measure the main channel inputs in correlation with other data. For this purpose, the RogaDAQ2 features for auxiliary analog channels along with four digital I/Os.
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration professional monitor and the "New" VI-400Pro real time vibration analysis.
|
|
WaveBook/516E
Ethernet-Based Portable High-Speed Waveform Acquisition
WaveBook/516E digitizer offers multi-channel waveform acquisition and analysis for portable or laboratory applications; includes 8 built-in channels expandable up to 72 channels of voltage, accelerometer, microphone, strain gage, thermocouple, position industrial encoder, frequency, high voltage, and other signal types.
Key Highlights
• 16-bit/1-MHz A/D
• 1 µs/channel scanning of any combination of channels
• Single and multichannel analog triggering with programmable level and slope
• Digital TTL-level and pattern triggering
• Pulse trigger and external clock
• Programmable pre- and post-trigger industrial sampling rates
• Sixteen digital inputs can be scanned synchronously with analog signals
• Operable from AC line, a 10 to 30 VDC source, such as a car battery, or optional compact rechargeable cell module
• Expandable up to 288 high-speed channels
• SYNC connection allows multiple units to sample synchronously
• Add up to 854 lower-speed thermocouple channels
• DSP-based design provides real-time digital calibration on all channels |
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an clinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest. |
|
Assessor Range
- Model 81 & Model 82 Integrating Averaging Audio level meters with Leq & Peak(C)
- Model 81CA & Model 82CA Integrating Averaging Sound Level counters with Leq & Peak(C) plus dB(C)-dB(A) Mode
- Model 83 & Model 84 Integrating Averaging Sound Level Meters with Leq & Peak(C) plus 1:1 Octave Band Professional filters
The Assessor Series is a range of simple to use Sound Level Meters designed to be used for Noise at Work Measurements and General Purpose noise testing.
All of the Assessor instruments are Integrating Averaging Sound Level Meters providing for the measurement of LAeq and LCPeak. The instruments are ideal for compliance with the requirements of the EU Physical Agents (Noise Directive) as well as many other Occupational Noise Regulations and Guidelines.
The Assessor Range of instruments are available as either Class 1 or Class 2 and can also be supplied as a Noise Measurement kit containing all that is needed to carry out a noise survey including the Assessor Sound Level Meter, Acoustic Professional calibrator, Windshield, Hard Attache Carrying Case, Operating Manual, Calibration Certificate, Professional batteries and 'Analyser' Professional software (where applicable).
|
|
The Ultraprobe 10,000 brings Ultrasound Inspection technology to a whole new level. With this one system, inspectors can perform condition analysis, record sounds, store and manage data.
With the push of a button, it is now possible to record a sound sample directly into the instrument and link it to one of 400 record files stored in the Ultraprobe.
Specialized Application Screens
Adjustable On/Off Features
Connect to External Devices
Flexible Reporting Options |
|
The NS 346 series noise sources are
specifically crafted to be used with noise
figure meters. They are factory calibrated
to a high degree of absolute accuracy.
These noise sources also have
extremely good match in both on and off
states which increases the accuracy of
noise figure measurement.
|
|
The VIBROCONTROL 6000 Compact monitor initiates a new period of vibration measuring and machine condition monitoring.
It is exactly adapted to the specific requirements of the machine to be monitored. Standard monitoring, if necessary, but also diagnostic monitoring, if needed.
Our huge application library offers you a great number of already practised solutions. Should this be insufficient to fulfil
your requirements, our application engineers will work out the optimum machine protection for your precious
manufacturing facilities. |
|
Innovative hardware
The compact diagnosis system efector octavis evaluates vibration signals using the methods of frequency analysis. The system uses a micromechanical acceleration detector. Data can be collected, processed and evaluated decentrally with no expert know-how required.
Continuous monitoring
efector octavis is designed for the early detection of rolling element bearing specifications damage or unbalance. Continuous monitoring offers a reliable and cost-effective solution as compared to intermittent methods.
The unit type VB1001 professional monitors up to two different objects. The unit type VE1001 can monitor up to five different objects or 20 individual frequencies. An object is defined as a rolling element bearing or a shaft. With efector octavis permanent vibration monitoring is no longer a question of price.
The integrated expert
Acoustic emission is detected, the frequency spectrum is calculated and e.g. the rolling element bearing state, the unbalance etc. are evaluated. The condition can be directly read on site and is signalled by binary switching outputs. The switching signal can be transmitted via unscreened cables. Connection to bus systems
is possible. |
|
VIBROCONTROL 6000 Compact monitor
Continuous and high-level productivity requires security for machines. Unlimited machine availability and uptime is the primary factor to guarantee trouble-free, predictable productivity.
VC-6000TM compact monitor- a new and revolutionary generation of on-line monitoring and diagnosis systems; and "smart" accurately describes the concept. These instruments adapt easily and exactly to a monitoring requirement, using some truly unique sets of features.
- Off-the-shelf, customised configuration
- Stand-alone or plant-wide concept with PC interface
- Professional cabinet or on-the-machine mounting
- Safety and diagnostic monitoring
- Extendable, multi-faceted modularity |
|
VIBROCONTROL 4000 offers optimum protection through permanent
condition monitoring.
This means:
• Acquisition of current machine condition through continuous measurement
of relevant condition and operating parameters
• Recognition of deviations from the desired condition
• Alarming at violation of limit values
• Plant shutdown when dangerous conditions exist
• Communication with control systems
VIBROCONTROL 4000 meets all important requirements of internationally
recognised guidelines such as API 670 and DIN 45670
Measured values are processed and compared with adjustable limit values in the individual monitoring modules of VIBROCONTROL 4000. 4 limit relays are available for each module for alarm signalling. In addition to the general customary limit values for pre- and main-alarms, in this protection system the measured values trend is also monitored. Unexpected sudden changes in the measured value which indicate abnormal behaviour initiate a trend alarm and thus permit an extraordinary level of sensitive monitoring
of the machine condition.
|
|
A Perfect Blending of Compact Size and Multi-function Ability
These self-contained professional monitors are designed to address essential and balance-of-plant (BOP) equipment assets that require continuous machinery protection but do not warrant the cost of larger, more sophisticated rack-based industrial monitoring systems like the 3500 Series. 1900 monitors provide a simple and cost-effective way to apply machinery protection on selected machines or points. They are designed to operate as stand-alone units, or in conjunction with our Trendmaster® Pro on-line condition monitoring equipment. |
|
- T1-45: Vibro-alarm
- T1-D: Absolute vibration monitoring, single channel with
- T1-D2: Absolute vibration monitoring, single channel with
- T1-EV1: Absolute vibration monitoring, dual channel with 2
- T1-EV2: Absolute vibration monitoring, dual channel with 4
- T1-EA: Absolute vibration monitoring, with 4 alarm relays
- T1-DADV: Absolute vibration monitoring, with 2 alarm relays
- T1-C: Relative vibration monitoring, dual channel with 4
- T3-NC2: Absolute vibration monitoring, dual channel
- T13-N: Speed monitoring, zero speed, reverse rotation
- T1-NC2: Axial displacement monitoring, dual channel with 4
- TMP: Vibrations monitoring, axial displacement, differe
- TMP-PROFESSIONAL SOFTWARE: Diagnostic and data industrial management software
- TM1: Vibrations monitoring, dual channel programmable
|
|
Data Logging Real Time Analyser
Description:
Model 30 Sound Level measurement instrument & Real Time Analyser with 1:1 Octave Band Industrial filters
The Model 30 (Class 1) and Model 30-2 (Class 2) are high performance, yet user friendly, integrating Professional sound level meters and Real Time Frequency Analysers.
Both models meet or exceed the latest standards for compliance with worldwide regulations and guidelines, making them ideal for most applications.
Taking measurements is as simple as pressing the 'record' and then 'stop' buttons. The wide single dynamic span of over 110dB ensures that you never make invalid measurements that 'Overload' or 'Under range'.
The Model 30 instruments simultaneously measures parameters with all Frequency and Time Weightings, this gives users the confidence to know they will always have the correct data for subsequent analysis.
Real Time Analysis allows users to measure all 10 individual 1:1 Octave Bands at the same time. This is very practical for reliable, accurate and rapid capture of variable noise levels to optimise the accurate prescription of hearing protection in industrial environments.
The Model 30 series can also be supplies as a Noise Measurement Kit containing all that is required to carry out a noise survey, including a Model 30 Sound Level Meter, Acoustic Professional calibrator, Windshield, Hard Attache Carrying Case, Wrist Strap, Carrying Pouch, Software, Calibration Certificates, Download Cable & Professional batteries.
|
|
Whether you are testing for OSHA compliance, quieting equipment, or monitoring the roar of a stadium crowd, B+K Precision's Sonometers can get the job done. The model 735 Sound Level counting provides 30~130 dB capability in three convenient measurement ranges Low, Med and Hi with an accuracy of ±1.5 dB. The meter meets the IEC 651 Type II and includes frequency weighting A & C and fast and slow time weighting. Two auxiliary ports provide either AC output, 1Vrms full scale, or DC output, 10mV /dB. With the model 735, B&K Precision can meet all your sound testing needs.
# Windows Software Included
# Clock Display
# 32,000 Records Data Logger
# RS-232 Interface
# Bargraph
# MAX/MIN function
# Auto Ranging (30 ~ 130dB)
# Resolution 0.1dB
# Level Range Display
# AC/DC Signal Output
# Auto Power Off
# Backlit LCD |
|
The CR:800B is a range of high performance Integrating Averaging Manufacturer of sound level meters that provide the functions and features demanded by modern measurement standards & guidelines.
The CR:800B is an Integrating Sound Level counting with all of the measurements required by the Noise at Work Regulations, as well as for general noise assessments and surveys. The CR:800B can also be used with an outdoor measurement kit for Environmental noise measurements.
In addition to the Broadband measurement provided by the basic instrument, the CR:800B can be upgraded to incorporate 1:1 and 1:3 Octave Band industrial filters, allowing the CR:800B to be used in a wider range of noise measurement and control applications. T
> Ideal for Noise at Work Assessments, Noise Control & Environmental Measurements
> Integrating Averaging Sound Level Meter, with Leq, LEPd (LEX8h), Sound Level, Lmax, Lmin, LCPeak, Ln's and Frequency Analysis
> Optional 1:1 and 1:3 Octave Band Filters
> IEC 61672-1:2003 Class 1 or Class 2 Group X
> Data Logging of Measured Parameters
> Up to 1,300 measurements and 8 days of Time History
> Large Graphical Display
> Advanced configuration options from the Deaf Defier3 software
> Updated Deaf Defier3 Windows software
> Outdoor measurement kits available |
|
The measurement of Environmental Noise covers a wide range of sources and situations. For example, Cirrus Research manufacturer of plc Environmental Noise Professional monitors are used in the following applications and measurement situations:
> Airport Noise Professional monitoring systems
> General Aircraft Noise
> Power Stations
> Construction Sites
> Traffic Noise
> Motor Racing Circuits
> Product Developement & Testing
> Mining & Quarrying
> Firing Ranges
A range of precision instrumentation is available for the measurement of Environmental Noise. This equipment has been purpose designed for outdoor measurements, and all meet or exceed the requirements of IEC 60651:1979and IEC 60804:1985 for Type 1. The range of instrumentation currently consists of portable and permanent noise monitoring equipment, along with outdoor measurement kits for Audio level meters. |
|
●Accurate testing of vibration on the workshop machines.
●For quick checking of unbalance misalignment, bearings specifications and gears
| | |
Acoustic measurement instruments, Vibration measurement instruments
