|
|
DTX2 series are torque measurement system for the screw-caps of cosmetic, food and beverage containers.
The operation is very simple and it is possible to achive high repeatability and accuracy. |
|
The ANDITORK bottle or jar opening tester is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 10 mm to 200 mm in diameter. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
If the cap has a safety ring, the test can be carried out using the ANDITORK Star, which measures both the break (first peak) and the opening torque (max torque). |
|
CapStar II is a simple and easy to use digital torque tester. The accurate information provided can then be stored in the internal memory, and downloaded to a printer or computer.
The LCD digital read-out clearly displays the peak torque of each test. Preferred units of measurement may be selected from a list of seven options. Statistical analysis of sigma, mean and range is also available when the data is printed out.
Container to be tested are located in adjustable jig capable of clamping circular or custom bottles and jars from 10 mm to 130 mm in diameter. Child resistant closures, much used in the pharmaceutical industry, can also be tested.
CapStar II is housed in a rugged, drip proof ABS housing with wipe-clean, touch sensitive controls. CapStar II is portable, battery powered and can be used with an optional mains battery charging unit. The screen displays a warning when the batteries need replacing or charging.
To save power CapStar II switches off automatically if no key is pressed within a specified pre-set period. |
|
Mecmesin's range of manually-operated Digital Torque Testers provide a simple and cost effective method of measuring low-level torques.
From packaging and toys, to high-tech automotive controls and medical devices, Mecmesin testers can help assesses the quality and usability of any rotating component.
Orbis
Perfect for any small rotary component, this rugged, lightweight and portable tester is ideally suited to both laboratory and production environments. The versatile mounting table sits atop an integrated digital torque sensor and grips the base of your sample.
The tester features high sampling-rate electronics for accurate peak torque capture, offering a greater level of accuracy than mechanical spring-type testers.
Summary.
Clockwise & Counter-clockwise Digital Torque Capture
Compact, Portable & Affordable
Clear Digital Display & Intuitive Controls
6N.m (50 lbf.in) Capacity
Water Resistant (rated to IP54)
Data Output for Easy Export of Results
Mains or Battery Powered
Versatile Mounting Table
Graphical interrogation of results with Dataplot Software.
Tornado
The Tornado features the same basic design and functionality as the Orbis tester, but with a range of advanced features, including pass/fail alerting, on board memory and a tamper-evident closure testing facility. The Tornado is also available in a range of capacities from 1.5N.m to 10Nm.
Tornado features.
Range of Capacities; 1.5N.m (13lbf.in), 3N.m (26lbf.in), 6N.m (50lbf.in), 10N.m (90lbf.in)
On-board Memory; up to 500 readings
Audible/Visual Tolerance Alerting
Tamper-evident Closure Testing; Characterise Both'Slip'& 'Bridge'Torques |
|
Features:
- Dull Tool Detection
- Broken Tool Detection
- Grinder Gap Elimination
- Tool Touching Workpiece
- Misplaced Workpiece Detection
- Overload Protection
- Crash Avoidance
- Wear Compensation |
|
FEATURES
The LMTX is a new system for the monitoring of hook load for telescopic cranes also when mechanical extensions are used. The system is composed by a transmission unit LIM-TX, which is hanged on crane hook, and by a receiver unit LIM-RX positioned in the control panel unit.
The LIM-TX is composed by a strain gauge pin for load detecting and by a micro controlled transmitter to send by radio the data weight to the receiver unit.
The new structure of the shackle hook group does not limit the lifting operations.
The unit LIM-RX has two functions: the show of the data weight through a four digits red display, the load limits control.
If used with mechanical extensions (up to four jibs) the LIM-RX allows, through a push button, to set the numbers of jibs and consequently to control the overload limits by a relay contact and a LED indication.
The device is included in SRD (Short Range Device) classification and uses a frequency band of 868.3 Mhz of free use (without any authorization).
The LIM-TX unit works with a battery rechargeable by the truck lighter and the LIM-RX unit works by a 12..24 voltage battery.
Free maintenance. No interference with the other on board radio devices.
APPLICATIONS
Load monitoring
Overload monitoring
|
|
It is the force measuring instrument of the mechanical type of the power supply needlessness which can measure tension and compression force easily and correctly.
Based on our long history of technical achievement as a force gauge pioneer with the variety of know-how, IMADA mechanical force gauge is produced under advanced technology and severe quality control, and maintain early high precision for a long period of time. |
|
Real time or Peak Hold Switch to observe transcients or capture peaks by a drag indicator
- Zeroing by a short push of the switch
- Tare Ring for an easy calibration of the tester
- Dual Scale: Shows NEWTON and kg
- Can be mounted on all manual test stands or the optional handle |
|
MF Series
Incredibly durable and user-friendly, our economical mechanical gauges are excellent for repetitive testing in assembly line or quality control lab applications. The peak mode features an easy push-button reset; this is especially helpful for doing repetitive testing in an assembly line or quality control lab. The real time mode allows you to see force changes as they occur.
Ergonomically designed for handheld use, gauges may be used with the optional handle (great for loads over 15 pounds). Response time is immediate. Large, easy to read dial indicators are designed to reduce gauge parallax.
The MF gauges feature a die-cast aluminum housing. Mounts easily to all Shimpo test stands for even greater control of repetitive testing. |
|
| ALTAIR LI is an advanced system which use an infrared focal plane array camera, capable of producing non contact stress images of structures and materials under cyclic loading. ALTAIR LI uses the thermoelasticity principle together with an highly sensitive infrared focal plane array camera and state of the art digital processing electronics. |
|
| The OBR 4400 takes the industry's first ultra-high resolution OTDR with backscatter-level sensitivity designed for component- and module-level reflectometry to the next level. With a small, easily transportable platform, the capability to "see" reflections out to 2 kilometers with no dead zone, and integrated temperature and strain sensing, the OBR 4400 gives you the ultimate in fiber diagnostics. The OBR 4400 uses swept-wavelength coherent interferometry to measure minute reflections (< 0.0003 parts per billion) in an optical system as a function of length with spatial resolution less than 50 microns. This provides the user with precision reflectometry and unprecedented optical-module inspection and diagnostic capabilities by providing the ability to locate and troubleshoot splices, connectors, fiber bends and breaks, insertion loss points, track polarization, verify PM components and more. |
|
TesT develops and validates systems, in line with the constantly growing requirements and aim at the needs of its customers to guarantee a complete and competent solution of the highest level. We engage ourselves to reach a high customer satisfaction in a surrounding field of prevention and continuous improvement. The new model 322 is the High end product of most modern measur-ing technique and offers an unusual price performance ratio.
dynamometers integrate a high-resolution force sensor as well as processor-controlled electronics with most modern software, based on a wide experience and the requirements of our customers.
The main area of application for these devices is research and development, production and quality assurance. Particularly operating forces as well as stability of construction and functional units will be measured.
Examples
Springs, switches, levers, fasteners, precision mechanics, foods, cosmetics, vehicles, medical technology, and many more.
|
|
Measuring System PHYSIMETER® 906 MC-B
The measuring system PHYSIMETER® 906 MC-B has been designed for the determination of the mechanical parameters force or torque on the basis of wire strain gauges. The instrument can be supplied with an integrated or an external sensor. For the power supply a block battery of 9 V is required (standard article) or alternatively a plug-in power pack (option). For easy handling the instrument is provided with the functions On/Off, reset and indication of peak value (upper and lower measuring value). In the standard version of the instrument the load introduction takes place at the bottom. Upon request, the load introduction can also be effected on the top of the instrument. The ergonomically designed housing, made of anodised, high-strength aluminium, is provided with threaded bores at the front side so that an unproblematic connection to the ERICHSEN testing machines is guaranteed - as it was also ensured when using the preceding models of the tensile and pressure testing instruments. The instrument is perfectly suitable for mobile as well as for stationary applications. |
|
Simple and yet complete, the CENTOR First uses efficient technology to simplify force measurements, in tension and compression.
A big display shows the force measured in tension or compression in the unit selected by the operator: newtons, kilograms or pounds. The bar graph completes the measurement.
The 3 keys make it very easy to use this force gauge and access the essential functions: measurement of the peak tension or compression value, resetting to
zero, and changing the measuring units. It is an ideal tool for basic tests during production. Its metal casing, protected by an elastomer overmould, gives it
exceptional strength.
The internal sensor stands up to an overload of 200% of its maximum capacity.
Simple, precise, robust, supplied with its own carrying case, mains adaptor and certificate, ready for use, it is the basic tool for force measurement. |
|
- Ergonomically-designed and advanced style.
- Rugged die-cast aluminum housing excellent for noise protection.
- Various output functions (For models with the functions only).
- Peak-hold function for all models.
- Various functions unique to the digital gauges.
- Various attachments and a carrying case. |
|
| TorqueStar Opta is the equipment of choice for the measurement and collection of torque data in the manufacturing environment. TorqueStar Opta's range of software features can be individually specified to give a configuration most suited to the requirement, from a simple no-frills readout to a comprehensive audit tool with display of torque curves and specialist measurement routines. |
|
Norbar's Test Beams are designed for the static calibration of Torque Transducers. They are ideally suited to Norbar's transducers, but can be employed on other manufacturer's equipment.
Torque is generated by the application of a known force at a known radius from the centre of rotation of the torque transducer.
Designed to remove potential sources of measurement error, these beams can be used to calibrate Norbar torque transducers, and torque transducers from other manufacturers (where design permits), as well as mechanical test devices. UKAS length certification is provided with each beam.
The Beams are designed with square drives machined to the top limit of ISO 2725:1987. This minimises any play between the beam and the transducer. However, a combination of square drive tolerances, misalignment of fittings and elastic rotation of the transducer shaft inevitably cause the beam to rotate from the horizontal under load.
Norbar's Radius Ended Beams are designed with a /-8% degree usable arc within which the calibration accuracy is unaffected.
Additionally the beams are designed to apply load on a vertical plane which cuts through the square drive inside the transducer. This minimises bending moments on the transducer and, for safe operation, ensures that the beam will not fall out of the transducer. |
|
Torque wrench calibrator
CENTOR Meter W
The CENTOR Meter W torque wrench calibrator enables verification of torque wrenches thanks to a series of reference sensors ranging from 22 to 222 NM.
Torque wrench calibrator
torque screwdriver calibrator
CENTOR Meter H
A set of low-capacity reference torque sensors enables use of the CENTOR Meter H torque screwdriver calibrator to verify torque screwdrivers from 1 Nm to 6 Nm. |
|
Experienced fastening tool users know that frequent calibration of air and DC electric tools is necessary to ensure exceptional performance. Ingersoll Rand offers users its Expert range of torque analysis systems. The ETT tabletop torque testers provide torque coverage for fastening tools (including pulse tools) from 1 to 30 Nm, while the ETA series of torque analyzers provide portable measurement capability with the ability to use external transducers or joint simulators. The ETW-A audit wrenches offer a portable and extremely precise way to audit actual joints following tightening with a traditional tool. And finally, Ingersoll Rand's new ETW-E provides labs and low-volume assembly operations the ability to fasten with true closed-loop control in a handheld cordless tool.
For users who don't have the capability or facilities to perform their own tool calibration, Ingersoll Rand also offers calibration service for any and all brands of fastening products. Call our toll-free number at the top of this page for details.
|
|
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test stand.
The TWIST, a 1 to 12 NM torsion test stand with combined Torque/Angle measurement provides this function.
The torsion meter enables torsion tests to be made on various samples such as springs, or metal or plastic parts.
It is made up of a horizontal, rigid test stand, with two rails to provide precision guidance.
Its calculating power enables it to record values coming from 2 different sensors simultaneously, monitor the set points and make a calculation for each channel.
On its display, it shows a Torque/Angle graph curve.
It provides the simplest, most versatile system for dealing with the most wide-ranging torsion tests in the workshop or in the laboratory. |
|
| The Crane Joint Rate Simulator (JRS Opta) is used for assembly tool performance testing. This is achieved by accurate and repetitive simulation of the joint without the use of a threaded fastener. The JRS can be configured across a range of joints from hard (20 degrees) to soft (720 degrees). Once the tool has finished its test cycle, the JRS Opta automatically releases the brake ready for the next test cycle. This has the advantage of speeding up the tool test procedure because there are no fixings to undo and no joint kits to back off and re-grease between test cycles |
|
| The Vortex is a twin-column motorised torque testing machine. Speed is set with a rotary potentiomer controller. Either speed or total rotation is indicated on an LCD display. Torque is measured by a `smart` static torque transducer and displayed on an AFTI. |
|
TS-7700 Torque Station Pro is designed to automatically measure motor torque characteristics, which are evaluated in development and product inspection of motor and motor driver, in combination with MT-series torque detectors. The system provides user-friendly application software, enabling easy operation, with secondary data processing using spread sheet application. Max. 16 kinds of input signal can be measured as well as torque and revolution at once. Moreover, motor characteristics can be shown in graph format after measurement and comparator function expands capability of usage in quality control.
47 models in 6 of MT-series torque detector are configured with the TS-7700 Torque Station Pro. With highlight of MT-7200 series of standing type for cogging torque measurement, which is said to be important to improve efficiency and noise reduction of motor, the TS-7700 system can meet a variety of requirement of motor test. |
|
This newly designed, numerical control torquemefer is capable of carrying out right-hand and left-hand torsion tests including at break. It is a freestanding structure with precision ball-type guides.
It is supplied with a computer and touch screen with new 24-bit microcontroller. Our system uses severo/ cards to control the axes, sensor, and cells that are connected via CanBus to enable displacements to position or force at a feedback speed of 1000 Hz. Load cell reads are effected 1,000 times per second. Minimum indexing is 1/32,700 (this can be increased on request).
|
|
It is a torque checker to control electric screwdriver, air driver, and torque driver.
The measuring joints included with I-8 series and never like as ordinary screwed ones but brings you a stable measurement by its low friction. Needlessness to rewind the joint helps you to saves a lot of time. |
|
| The newly developed measuring system MONITEX® measures the twisting angle and the speed of the approved KTR elastomer couplings ROTEX® and ROTEX® GS. Without having contact a light barrier scans the coupling and calculates the compression respectively the possible wear of the spider. Thus overload and possible wear can be determined in time without the need for a time-consuming disassembly of the drive unit. |
|
Besides having all the functionalities of the CENTORW Easy, the CENTOR W Star torque gauge provides handy further possibilities: the graphic display shows the
full graph Torque = C(t). This gives you a general overview of the current test.
The torque gauge is able to make several types of calculations on demand (break point, first peak, average, torque at time T, etc.).
It is equipped with a special sensor recognition system. This means that a single instrument can read different sensors (several capacities, Force
or Torque).
Furthermore, it is possible to freeze its configuration to avoid handling errors.
It is the most versatile instrument designed for all tests in industrial surroundings. |
|
| The K series is a totally new class of torque analyzers. They feature a built-in transducer and also have the unique ability to connect to an external transducer. Using a high performance circuitry they collect, store and eventually download torque measures for a complete analysis of the tool and/or the joint. Priced at an outstanding low level, this tester will surely become very popular for any company wishing to improve their product quality through the precise control of torque. |
|
Special software for download of measuring data.(TNP series only)
Download the torque data of open and close into Excel.
Download the memory data into Excel.
Create the frequency distribution graph of memory data. ¦Excel is registered trade name of Microsoft.
Lower the height,Compact design
126mm height, Fit within A4 size, Space-saving.
USB communication(TNP series only)
Sophisticated type TNP series can download the data to PC with USB, and available varias types of data management.
USB communication
Comparator function
Memory function(1000 data)
Economy type(TNJ series)
Simple function and easy measuring, but high accuracy. ¦TNJ series does not have USB port and comparator function. Please see specification. |
|
|
|
Force measurement instruments, Torque measurement instruments
