|
|
| Waste gas, biogas, off-gas, blast furnace and coke professional oven gas are often used as fuel for boilers, reboilers, industrial furnaces, gas turbines and incinerators. The highly variable BTU content makes it difficult to use these fuels efficiently, safely and with minimum emissions. This professional analyzer directly measures the flow of air needed to burn a flow of a variable composition fuel gas. |
|
Designed and manufactured within its instrument workshops Factair's range of air quality industrial testers has established new levels of accuracy and reliability.
Each unit has been developed for speed and ease of use. The Safe-Air Tester range ensures compliance with the mandatory requirements of COSHH L5. The latest generation models are the F3000 and the F3001 which are designed to test low and high pressure compressed-air respectively to the requirements of BS EN12021:1999.
To help with the correct use of these instruments Factair has produced videos for both instruments, together with self assessment questionnaires to test your knowledge, all of these can be accessed from the attached link. |
|
| Control of the air-to-fuel ratio in premix gases is essential for venturi or industrial diaphragm mix outlet stations in glass and fiberglass production and also for ribbon industrial burners or flame treating applications. PreMix industrial analyzers take a sample of premixed gas, burn it and determine the resultant excess oxygen or excess fuel.The CMFA-P 2000 is portable, the PreMix 2000 is fixed. |
|
or industrial service where changes in fuel gas or ambient air characteristics will upset the heating process, the mixture output from the combustion controller can be monitored and controlled. The Selas Qual-O-Rimeter Mixture Monitor detects any deviation in flame temperature and automatically adjusts the gas/air ratio to compensate. By connecting the Qual-O-Rimeter sample line immediately downstream of the combustion controller, continuous and accurate correction for gas and ambient air variations is assured before production is affected.
The Selas Qual-O-Rimeter Mixture Monitor is superior to oxygen analysis for temperature-sensitive processes. Pushbutton control, digital display, and microprocessor circuitry assure easy operation and fast-acting response. Built-in alarms and an output for optional professional recorder are also included. |
|
The Aries roaming air industrial monitoring system is ideal for industrial hygiene applications including use in washing rooms, plant floors, and office areas. Designed for in-situ monitoring of ambient air, this complete, turnkey system includes:
- integrated professional cart, notebook data system, and 12 volt battery all designed to be wheeled from location to location
- 80 meter pathlength gas cell and powerful AutoQuant quantitative analysers software for low level detection of ambient gases |
|
Air quality sensors enable an individual, demand-responsive control of the outdoor air supply and thus an optimization of the energy consumption.
In modern buildings the use of these sensors is almost taken for granted - the energy consumption and the well-being of people are of paramount interest |
|
Combining state of the art sensing technology with a sleek design the IAQPoint accurately measures PROFESSIONAL CO2, temperature and humidity levels and ensures the right amount of fresh air is supplied to all parts of a professional building where people are present.
With its BACnet, LON, Modbus and FLN digital output capabilities, the IAQPoint is simple to install and integrates easily into existing Building Automation Systems.
By simultaneously monitoring three parameters in one unit ; CO2, temperature and humidity , the IAQPoint dramatically lowers the overall installation cost by reducing the amount of required wiring and use of a simple snap-fit mounting kit. |
|
| The SPA 500 analysis system was developed particularly for the measurement of the oxygen content in steam-heated autolavas during the vulcanization process by rubber products by peroxide (H2O2). The duration of the flushing of the autoclaves manufacturer with water vapor can be reduced by the accurate measurement of the CO2 content. This leads to a clear cost saving. The determination of the optimal starting point and the monitoring of the CO2 content during the entire curing process lead in addition to an improvement of the product quality. The professional analyzer is both in a stationary execution (SPA500S) and in a portable execution (SPA 500P) available. |
|
The new Rapidox 3100 incorporates a powerful and silent linear piston pump manufacturers for remote sampling of gas. Connections are made using 6/4mm flexible tubing to the front panel input and output unions. The front panel includes a flow gauge allowing the user to control the rate of gas flow into the analyser from 0 to 4 litres per minute.
From the display to the outputs, all features are fully user-programmable using the keypad on the front panel. Easy to use and simple to calibrate using your choice of gases, the Rapidox 3100 offers exceptional performance and flexibility using a rugged, long-life zirconia o2 sensor. The Rapidox now comes with powerful Windows software for easy data-logging and graphing. Just switch on and start measuring...
-Bench mounted zirconia oxygen analyser with internal sensor & sample pump
-Rapid response long-life sensor
-Sample flow rate adjustable from 0 to 4 litres per minute
-Suitable for applications where the gas must be sampled remotely
-Gas is sampled through flexible tubing connected to the front of the analyser
-Perfect for analysis of room air or difficult to access locations
-Perfect for static gas applications
-Not suitable for hot gas analysis (i.e. >150°C at point of entry into analyser) |
|
The MicroDock II is the world’s most advanced, compact and affordable automatic calibration, testing and data management system for portable gas detection equipment. Compatible with BW’s GasAlertMicro 5, GasAlertMicro 5 PID, GasAlertMicro, GasAlertMicroClip, GasAlert Extreme and GasAlertClip Extreme family, the MicroDock II is expandable to up to 10 docking modules (including up to 6 charging units).
- Fully automatic “hands-free” calibration & functional bump test
- Automatically verifies performance of audible and visual alarms
- No computer required
- Entirely self-contained
- Fully portable
- Lightweight and mobile
- Operates via line power or a set of four C-cell batteries
- Add additional self-contained docking modules to system via simple, plug-in connections-no external industrial pressure transducers or gas lines necessary
- Simplify record keeping
-Verify proper performance
- Reduce maintenance costs
- Multiple MicroDock II systems can be connected via a LAN
- Multi-language support in English, French, German, Spanish, and Portuguese
|
|
Test flue gasses at home or office spaces for the
presence and location of CO leaks. With a protective
rubber professional boot, the new 707 fits comfortably in your hand and operates with the push of a button.
- Clear and fast response with advance pump
driven technology.
- Peak Hold to capture peak CO reading.
- Instrument recycles and will not shut off if 15ppm CO
is present, increasing safety.
- Store Button allows you to save up to eight readings and
then print using the IR port and optional A740 professional printer.
- 1 ppm sensitivity.
- Measures up to 10,000ppm.
- Push on professional fittings are fast and easy to use.
- Large easy to read backlit display.
- Advanced electrochemical detector is field replaceable
and calibrateable.
- Protective rubber boot and soft carrying case with shoulder strap is
included. |
|
The Fluke CO-220 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels with a single compact instrument.
Featuring the newest generation of electrochemical detectors, the CO-220 responds very quickly to ambient changes in carbon monoxide concentration without the use of a pump.
The CO-220 is the perfect instrument for technicians and other professionals who need to measure CO levels within spaces such as industrial environments, commercial buildings, or residential dwellings where accumulation of combustion gas is possible.
|
|
GfG is a world leader for industrial gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and detection available.
GfG offers an extensive range of portable professional monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-suppliers of gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and detection available.
GfG offers an extensive range of portable industrial monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
The Pulsar EX provides continuous automatic on-line monitoring of contaminant levels in beverage grade carbon dioxide, providing early detection of impending contamination and improving product quality.
|
|
| The Series 9500 Oxygen and Carbon Dioxide Monitor is designed to provide continuous, unattended monitoring of both oxygen and carbon dioxide. |
|
Series 200ACE Acetaldehyde Professional analyzer
Meets ISBT Method 11 criteria for selective measurement of acetaldehyde in CO2
- Rugged, low cost, low maintenance, turn-key system
- Capable of PC-based control and data logging
- Batch or continuous stream monitoring
- Detector: Flame Ionization Detector (FID)
- Automatic, hands-free calibration, flow setting and analysis
- Detection limits for acetaldehyde of < 30 part-per-billion (ppb)
- Instrument operating temperature: ambient
- Detector temperature: factory set; adjustable
- Professional oven temperature regulation: factory set with professional software controlled conditioning
- Tested against virtually all of the potential alcohol and oxygenate impurities that could be present and determined to be interference-free
- Acetaldehyde is captured by the software system, with results displayed digitally on the instrument's front panel
- On-board software package contained in the Series 200ACE allows complete unattended operation
- Installation: bench or 19" rack
- Power: 115-230 V, 50-60 Hz |
|
Series 200AHC Aromatic Hydrocarbon Professional analyzer
Specific detection of benzene within beverage-grade carbon dioxide.
Trace aromatic impurity monitoring is of critical importance to carbon dioxide manufacturers and the carbonated beverage industry. The Series 200 AHC meets all ISBT Method 12.0 criteria for selective measurement of benzene in carbon dioxide. Continuous stream or batch sampling operations are readily performed.
The Series 200 AHC is specifically designed as a rugged, low cost, low maintenance, simple to operate, turn-key system. No professional cylinder support gases are needed. Calibration and sample introduction are totally automated. A newly designed photo-ionization detector (PID) and proprietary technology are used for the specific measurement of benzene without interference from other potential impurities in beverage-grade carbon dioxide. Detector response is linear over three orders of magnitude. The detectable limit for benzene is 3 ppb, which is far below the ISBT guideline limit of 20 ppb. GOW-MAC’s Series 200 AHC system is also capable of PC-based control and data logging. Full documentation is provided, along with optional customer training and support services.
|
|
Series 200BTEX Industrial gas analyzer
Meets all ISBT Method 12 criteria for selective measurement of BTEX (benzene, toluene, ethyl benzene, o-xylene, m-xylene, and p-xylene) in CO2
- Rugged, low cost, low maintenance, turn-key system
- Features: Auto-Calibration, Auto-Calibration Validation, Process/Manual mode, As Found/As Left function, Sample stream selection, and six 4-20 mA outputs
- Capable of PC-based control and data logging
- Batch or continuous stream monitoring
- Detector: Photo Ionization Detector (PID)
- Automatic, hands-free calibration, flow setting and analysis
- Detection limits for benzene of < 5 ppb
- Instrument operating temperature: ambient
- Detector temperature: factory set; adjustable
- Professional oven temperature: factory set with professional software controlled conditioning
- Tested against virtually all of the potential alcohol and oxygenate impurities that could be present and determined to be interference-free
- Benzene is captured by the software system, with results displayed digitally on the instrument's front panel
- On-board software package contained in the Series 200AHC allows complete unattended operation
- Installation: bench or 19" rack
- Power: 115-230 V, 50-60 Hz |
|
Full inline quality control for soft drink professional production. Know in less than one minute the dissolved carbon dioxide, professional oxygen, and temperature in the product. Offers real-time analysis. Audible and visual professional alarms. Internal components are sanitized automatically during normal CIP operation. Up to 1,000 product specifications can be stored in the professional software.
-Confirm carbon dioxide professional levels within one minute of initial startup or changeover
-Confirm Brix levels within three minutes
-Reduce product and package waste by not filling packages with product out of specifications
|
|
| AMETEK Western Research’s UV-VIS photometric industrial analyzers are recognized worldwide offering excellent performance and reliability for continuous monitoring of pollutants emitted from refineries, chemical plants, power stations, and other industrial facilities. Western Research has the full system design and manufacturing capabilities needed to engineer a turn-key solution to meet your requirements. |
|
Oxygen Flue gas analyzer BA 2000
In combustion applications such as process heaters, steam generation boilers or industrial furnaces, the amount of air needed to reach optimum system efficiency can vary rapidly.
Accurate O2 measurement is also essential in the control of NOx and SOx emissions. Equipped with a fast responding sensor and attached directly to the fire box, this professional analyzer provides immediate information to allow adjustment of the combustion process in real-time.
The BA 2000 is designed to ensure accurate and rapid measurement in most combustion processes. The unique fast loop design continuously provides a fresh sample gas stream to the zirconium oxide sensor. The sensor enclosure is heated to 180 °C to avoid condensation. The zirconium oxide sensor does not need any reference gas. 1-point-calibration of the sensor takes place with instrument air which is also used for the aspirator driving the sample gas. Optionally, a 2-point-calibration may be performed.
The measurement cell is protected against dust and particulates by a heated filter. The filter element can be easily replaced without tools by a 90° turn of the handle. Filter elements are available in ceramic, sintered or pleated stainless steel. The BA 2000 can be used with these industrial filters for dust loads up approx. 2g/m³. When the dust load exceeds this limit, additional in-situ filters are available.
Fast response
Easy replacement of probe and filter
Flue gas temperature up to1600°C
Durable ZrO2 - cell
Ambient temperature -20°C up to 70°C
No reference gas needed
No calibration gas needed
Calibration by instrument air
No gas conditioning needed |
|
The BA 4510 is based on an advanced, zirconia measurement cell. The highly selective cell combines high mechanical strength with consistent accuracy. With inert gases, the cell delivers an increasing signal if the partial pressure of oxygen drops thus giving a highly precise measurement of trace oxygen levels. The value is shown on the digital display and a current output is provided.
The BA 4510 has an integrated sample pump. The unit is operated with menu guided keys on the front panel.
For O2 measurement in forming gases, a special version is available.
Measurement cell does not require daily or weekly calibration and is nearly drift free
4 - 20 mA analog output
RS 232-Interface
Internal industrial sampling pump
Simple menu-guided operation
Programmable alarm output |
|
Due to the extremely fast response time of the patented M&C magneto-dynamic measuring cell with no stagnant volume as well as the negligible cross sensitivity from other sample gas components, the portable M&C oxygen analysers has a wide variety of applications. The analyser is a suitable and reliable instrument for monitoring oxygen concentrations in various gas analytical control applications including flue gas-, inert gas-, fermentation processes- and process or laboratory control measurements.
|
|
Teledyne%u2019s hand-held GB300 Portable Percent Oxygen analyser is designed for use in a wide variety of applications from diving to fine tuning boilers.
Lightweight and easy to use, the GB300 incorporates Teledyne%u2019s own Micro-fuel Cell sensor for quick and accurate analysis of oxygen.
This maintenance-free, sealed, electrochemical cell is specific to oxygen, insensitive to flow rate, and has a 90% response in less than 10 seconds. At the end of its life, the cell is discarded and replaced like a professional flashlight battery.
Constructed of high impact resistant materials, the GB300 provides unparalleled performance under the harshest conditions. The unit is powered by 3 AA batteries which should last for at least 2000 hours of use. |
|
ENOTEC, as one of the world’s leading suppliers of flue gas measuring and analyser systems, is your competent partner for complete emission and process analyser systems ranging from a single probe, from our own production, to an individually designed system using our own analysers together with O.E.M. products, through to turnkey emission and process projects.
Process and emission industrial measuring systems from ENOTEC are used worldwide in refuse incineration, crematoria, power-generation, and all kinds of other industrial combustion and process engineering.
For each task ENOTEC develops individual concepts from the sampling and treatment of measuring gas up to the analysing/measuring unit and the logging/recording. ENOTEC co-operates with all qualified blue-chip suppliers of analysers and selects for each case the instruments, which are optimal in performance and value.
|
|
|
Gas analyzers, Portable gas detectors 
