|
|
INSPECTION MACHINE
FOR FABRICS WITH PLATFORM
Mod. ISP 220
The inspection, winding and plaiting machine with platform Mod. ISP 180 PLAIT / ROLLS,
Allows a check of the fabric quality.
Tanks at the linear geometry of the drawing, to the sensitive system of synchronization and the motorization of all the rolls of delay fabric, the machine is excellently for the verification of elastic fabrics to sweater and shuttle.
Besides, thanks to the management from PLC interfaced to inverter, the operator can modify in real time tension fabric and hardness roll.
With the addition of a platform to allow the operator a qualitative control more near at the fabric. The winding or PLAITING process happens behind the operator.
The machine can be inserted in an automatic layout of more inspection machine with an automatic packing
Technical characteristics:
• Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
• Inclined inspection table with rear light
• Up light
• Platform
• Auto-centring winding unit
• Winding of the roll
• Adjustable compactness of the rolls
• Adjustable fabric tension
• ø500 mm diameter knitted fabric rolls
• 3÷60 m/min. speed control without step.
Optional:
• Digital weight measuring system
• Automatic linear cut
• Wood or special light
• Comatex software for store all the faults
• Barcode labelling for more type of error
• Mark-fault one or more fault
• Doubling system in 2 or 4
• Packing system |
|
INSPECTION MACHINE
FOR FABRICS for wool, elastomer and precius
Mod. ISS 220 SPECIAL
The inspection, winding machine
for wool, elastomer and precius
ISS, is different from the preceding machine for the characteristic to have two angles of vision for the control of special fabrics.
The characteristic structure has been studied for facilitating the worker to the stain remover and the darning of the fabrics.
Complete of rull of automated switching can be integrated
Technical characteristics:
• Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
• Doubled inclined inspection table with rear light
• Up light
• Auto-centring winding unit
• Winding of the roll
• Adjustable compactness of the rolls
• Adjustable fabric tension
• ø500 mm diameter knitted fabric rolls
• 3÷60 m/min. speed control without step.
Optional:
• Digital weight measuring system
• Automatic linear cut
• Wood or special light
• Comatex software for store all the faults
• Barcode labelling for more type of error
• Mark-fault one or more fault
• Doubling system in 2 or 4
• Packing system |
|
AutoPoint II is a fixtureless, gridless flying probe with a unique power off impedance analysis measurement system. Capable of detecting manufacturing and in-service faults as standard the measurement system is not limited to a single technique.
With the addition of the MiniScanner a wide range of complimentary instruments, whether from DiagnoSYS or an IEEE/GPIB interface instrument supplier, can be added and fully supported by the TestVue32™ operating software. |
|
INSPECTION MACHINE
FRONT-REAR FOR TUBOLAR FABRICS
Mod. ISD 220
The inspection, winding machine, ISN NO STOP,
allows a check the quality of the front and the rear side of the fabric.
Thanks to the linear geometry and to a new system of drew-in of the fabric, the machine is able to check both the fabrics tubular that the fabrics in open, the new system of wrapping allows besides to wind the roll in hourly sense or ant-clockwise.
The machine is excellently for the verification of elastic fabrics to sweater and shuttle.
Besides, thanks to the management from PLC managed to inverter, and to the sensitive system of synchronization and the motorization of all the cylinders of transport fabric, the operator can modify in time real tension plotted and compactness roll.
Technical characteristics:
• Inlet fabric from Roll of plait
• Special draw-in of the fabric
• Double inclined inspection table with rear light
• Up light
• Auto-centring winding unit
• Winding of the roll in clockwise sense or ant-clockwise sense
• Adjustable compactness of the rolls
• Adjustable fabric tension
• ø500 mm diameter knitted fabric rolls
• 3÷60 m/min. speed control without step.
Optional:
• Digital weight measuring system
• Automatic linear cut
• Wood or special light
• Comatex software for store all the faults
• Barcode labelling for more type of error
• Mark-fault one or more fault
• Doubling system in 2 or 4
• Packing system |
|
| Roll scan inspection means that gears are scanned in rolling contact with a special inspection gear. The instrument combines the simple, robust and temperature stable design of the single flank gear rolling inspection with the greatest information density of modern coordination measuring technology, yet the measuring time remains short. |
|
OTS 50 the industrial thickness meter for sheet glass and acrylic panes.
The OTS 50 is a sensor especially developed for measuring on transparent, parallel and highly reflective surfaces. Directly aimed at the glass industry for on-line control of the production of double glass units, DGU’s, also known as thermo windows.
The sensor is controlling thickness of the window units providing precision measurement of the thickness of one or more glass/acrylic panes. The measuring principle is based on total/direct reflection from one side of the object/window. The OTS 50 sensor is a very rugged and compact unit. All optical and electronic elements are contained in the sensor unit, this is a valuable quality for many industrial applications.
In addition to the competitive palette of ODS standard sensors and O2DS scanners, DSE design and customize special sensors to our customers needs. The OTS 50 is a good example of this appreciated DSE activity.
For further information please study the PDF/datasheet available at our website www.sensor.dk
|
|
With highly demanding requirements to maintain glass thickness in the micron and sub-micron ranges for many applications, only the most accurate sensors will do. Using special laser lighting and image processing software to extract thickness information from the image of the laser beam as it passes through the glass, accurate measurements are achieved in real time, with sensors able to deliver instant data throughput.
Our Glass applications division works closely with System Integrators & Original Equipment Machine Suppliers to deliver the most effective solutions for their particular sensor vision needs.
|
|
●Easy to use handheld thickness gauge
●Suitable for most metallic and non-metallic materials
●Display current thickness or minimum thickness (menu selectable)
●Upper-lower limits setting and sound alarm
●Memory for 500 stored values
●Two point calibration
●Display resolution 0.1mm/0.01mm selectable
●Display in mm or inch
●LCD display with adjustable backlight
●Low battery indicator
●RS232 output for data transfer
|
|
| The v|tome|x s is an ultra high-resolution CT system, equipped with a special image grabbing and processing software. |
|
OPTICAL HOLE INSPECTOR
- Shows magnified full 360° inside view of holes
- Allows instant detection of potentially costly drilling imperfections, spiraling, roughness, and burring
- Facilitates checking of PCB holes for plating voids, smoothness and solder flow
- Automatically focuses on contact with surface
- Low cost
- Requires no operator training
- Quick inspection of plated through boards |
|
Features:
Resolution: 0.1 µm
Linearity: +/- 1 µm (Diameter)
Linearity: +/- 0.5 µm (Position)
Standard gauge fingers for measure of diameters from 5 mm to 90 mm.
Watertight.
Measure of smooth or interrupted surfaces.
Gauge slides driven by air or oil.
Fine adjustment on slide.
Wearproof fulcrums.
Advantages:
Accurate.
Sturdy, suitable for installation on grinders.
Fits pre-, in-, and post-process applications.
Quick set-up and retooling. |
|
Features:
» Handling of two LVDT transducers, for continuous and interrupted surfaces gauging.
» Compact size.
» Bench and built-in versions.
» Application customisation by the user through the set-up of:
- Gauging formulas;
- Arms ratio for self-learning;
- Metric or British measurement units.
» Analogue indicator for the continuous measurement
display, with x1 and x10 automatic scale change.
» Digital I/O, SINK or SOURCE type, for the connection to CNC/PLC.
» The operator's panel provided with sensitive waterproof sandwich keyboard allows:
- Setting the three gauging thresholds for the output contact;
- Setting the delay of cycle start input contact and zero quota output contact;
- Setting the zero correction value (offset);
- Selection of the reading of individual transducers for the mechanical manual zeroing;
- Measure electronic, manual and automatic zeroing.
» Memory and LEDs test performed at start-up.
Advantages:
» Accurate.
» Simply to configure and to programme.
» Can be integrated in any architecture both in a new machine or in an already operating machine.
» Comfortable to use.
» Tough and reliable.
» Affordable. |
|
Features:
Overall dimension: 20x40x76 mm.
Measuring range: up to 12,5 mm
Repeatability: < 0,05 µm.
Connection to the electronics through cables long up to 30 m
Memory chip for process optimization.
Pneumatic recoil.
Quick manual retooling of the fingers.
Wide range of fixed or manually adjustable supports.
Fingers available with breakaway pin.
Advantages:
COMPATIBILITY
Fits all measurement applications related to:
- diameter
- position
on new or operating machines
No limits of installation due to the loss of the signal.
ACCURACY
Within the measuring range:
- sub micron, through automatic calibration on the master for every measure.
- micron, through automatic calibration on one master only for all measures.
PRODUCTIVITY
No manual retooling within the measuring range.
Quick manual retooling for adjustment to a new family of pieces.
Prevention from machine breakdown due to accidental impacts. |
|
AM313T - DinoLite Plus (VISTA supported)
Featured with unique Microtouch snapshot, the AM313T offers the user another option of the way taking the picture. Without visible physical snapshot button, the Microtouch was designed to minimize the vibration when taking the picture under microscope. The Microtouch had also seamlessly integrated with the DinoCapture software along with other AM313's features like measurement and LED control.
Product Features:
*Resolution: 640* 480pixels (VGA)
*Adjustable magnification: 10x~50x, 200x
*Built-in 8 white-light LED illumination (software switchable)
*MicroTouch snapshot
*Frame rate: up to 30fps
*Interface: High speed USB image transmission (PC)
*Dimension:10cm (Height) *3.2CM (R)
*Weight: 90g
*Software: DinoCapture
*With measurement capability
Support Operation System: Windows Vista, XP Professional x64 Edition, XP, 2000, or Windows Server 2003
|
|
Mantis Compact excels in the low magnification range for inspection or manipulation tasks where bench magnifiers have traditionally been used. Mantis Compact has a small footprint and low investment cost giving a superb price / performance ratio.
Patented optical technology allows operators freedom of head movement for superb ergonomics and hand-eye co-ordination, with the ability to wear glasses if required. Operators can increase productivity and improve quality, at an affordable price.
Mantis Compact offers: Superb hand-eye co-ordination for inspection and manipulation tasks; a choice of x4, x6 quick change objectives; Bright white, true colour, LED illumination providing over 10,000 hours of shadow-free viewing.
|
|
Aerospace
Offering a wide range of inspection solutions for aircraft engine part production, or composite airframe manufacturing to full aircraft maintenance.
Automotive
Offering a wide range of inspection solutions in every step of the Automotive value chain from semi-finished products (rods, bars, billets) up to the final assembling of vehicles.
Power Generation
Offering a wide range of inspection solutions for Balance of Plant (BOP), steam generators, turbine and generators, pipes and vessels and reactor internals.
Oil, Gas & Process
Offering a wide range of inspection solutions that help detect corrosion and inspect welds.
|
|
IT Concepts - Industrial Endoscopy
... the new prospect
since 1991
7 sites
3 continents
500 collaborators
We draw our force thanks to our network of partners on different
continents. For Europe, Africa and the Middle-East our Main office
is located at Lahnau (Germany), a few kilometres from Wetzlar `the city
optics". The team qualified around her President Alexander Bowl
is characterized by a great flexibility and improves constantly.
Our main force is the innovation and the search for products always
more compact and autonomous. Our systems are used inter alia in
energy, aeronautics, the car, the railway one and the building. Us
also let us have a product range especially conceived for
the police force (armed, customs, brigades of interventions, sécur
I t-piece...) , We accompany you in vot Re T ravai L while developing
solutions and of the innovating products adapted to your needs. Our team
is with your service in order to bring all its competences and you to you
guarantee the quality of our products while reducing the delivery periods.
You discover... your new prospect. |
|
SATIMO designs and manufactures Quality Inspection Systems.
Directly issued of the knowhow of SATIMO in the antenna measurement field, these linear equipments, composed of hundreds of sensors, offer online microwave scanning of products transported on a conveyor belt.
Completing infrared and optical camera as well as x-ray and gamma scanners, the microwave vision capabilities open new possibilities that are not available from other technologies on the market.
Small pockets of moisture can be detected inside the material under test, as well as cavities or inhomogeneous objects, with a resolution in the centimeter range.
The complete density or moisture distribution profiles of large blocks or sheets of non-metallic materials can also be determined, at full production speed and without the safety concerns raised by X-rays or radioactive isotopes.
The main requirement for defect detection using microwaves is that the material under test is fairly non-conductive, in order for the microwaves to be able to propagate through the material. There must also be a detectable contrast between the defect and the surrounding material, i.e. a difference in density, chemical composition, or moisture content.
The SATIMO Quality Inspection System can be used for a wide range of products.
The following materials have been already successfully tested with the SATIMO Quality Control System:
Glass
Plastic
Mineral Wool
Wood
Leather
Food Products
Plasterboards
Paper
Composite Materials |
|
Lynx VS8 is an advanced stereo zoom microscope for Printed Circuit Board inspection and is ideal for all electronics applications including fine pitch, surface mount, TAB and BGA technology.
The Lynx VS8 consists of a stable, high capacity scanning stage that provides free floating movement for all sizes of board, including double sided PCBs. Stage can be locked for precision inspection tasks (x-axis, y-axis, or both). Complete with earthing point for static safe inspection.
Lynx VS8 provides magnification from x7 - x40 within the standard zoom range. An oblique and direct viewer can also be added to the modular system allowing the operator to view a subject direct or from an angle of 34° from vertical, which can be rotated through 360°.
|
|
Cygnus Intrinsically Safe
Multiple Echo Ultrasonic Thickness Gauge
Certified Intrinsically Safe to Ex II 1 G EEx ia IIC T6
A tough, rugged Ultrasonic Thickness gauge using our Multiple Echo technology, designed for safe use in potentially explosive environments. The Cygnus 1 Intrinsically Safe is supplied ready to use as a complete kit in a protective carry case with 2 rechargeable batteries.
Features
• Certified Intrinsically Safe to Ex II 1 G EEx ia IIC T6 (CSA Class 1 Group A Division 1)
• For use in hazardous areas
• No plant shut down or hot work permit necessary
• Heavy duty sealed unit - highly water / dirt / dust resistant
• Rugged construction - shock proof
• Stable calibration - linear accuracy - no zero adjustment
• Self verification of the measurements to ensure accuracy
• Various probe options
• Two rechargeable batteries with charger
• Displays sound velocity settings
• Echo strength indicator to aid measurement
• Bright LED display with polarised filter
• Probe frequency selectable
• Low battery warning
• Metric / Imperial switchable
Applications
• Maintenance and safety checks on petroleum, chemical and LPG storage tanks.
• Corrosion checks on ships’ shell plates, bulkheads and inside enclosed areas.
• Metal thickness safety checks on steam and pressurised water systems, transportable gas containers and compressed air systems.
• Systematic wall thickness and corrosion monitoring of storage tanks and process vessels.
• Quality assurance metal thickness checks.
• Maintenance and safety checks on bridges and street lighting columns.
For more information, please visit www.cygnus-instruments.com |
|
| With the development of optoelectronic technology, laser diode has been one of the most important components. The Improvement of laser diode performance directly effect on the developing of optoelectronic technologies, and it highly depends on an advanced testing & analyzing system. Meeting the market demand, LD Characteristics Testing System designed by HTOE is a high performance, cost effective testing and analyzing system for laser diode characteristics. |
|
| ILX Lightwave offers burn-in and reliability test systems for laser diodes and LEDs as well as functional test systems for precision characterization of LIV parameters. These systems incorporate ILX Lightwaves proven technology for laser diode drivers, temperature control, and optical measurement to provide the precision and reliability required for manufacturing, engineering evaluation, and R&D applications. |
|
ATLAS70 is a multi-sensor system for comprehensive mapping of tunnel walls. It includes a visible channel (laser), an infrared channel, a laser profilometer and an odometer.
The aim is to precisely locate and record possible cracks, water infiltrations and electrical cable overheating.
|
|
Laser triangulation sensors have proven an ideal technology for measuring thickness of products. Noncontact operation allows accurate measurement of soft, gummy, materials as well as product moving at high speed.
In a typical thickness measuring application, two triangulation sensors are used, one above the material and one below the material. Outputs of the two sensors are compared differentially to determine the material thickness. This approach provides accurate thickness data even if the material location moves up or down.
To measure variations in thickness across the width of a product, the sensors are mechanically scanned over the width of the material.
Moving product often has variation in surface texture, reflectivity or color, so sensor data must not be influenced by these changes. To insure that these variations do not influence sensor performance, LMI includes an automatic gain control feature in each sensor which automatically compensates for any surface changes.
For products that are soft or deformable from contact gaging, or which are abrasive and will wear contact probes, laser triangulation provides an ideal non-contact measurement solution. High frequency response provides detailed information about local thickness variations, even for fast moving product.
Our applications division works closely with System Integrators & Original Equipment Machine Suppliers to deliver the most effective solutions for their particular sensor vision needs. |
|
A simple solution for in-line process monitoring, wet and dry end brightness grading, or paper break detection.The BriteX-1000 series brightness sensor is easy to use and affordable enough for multipoint sensing. Tighter control of processes can reduce operation costs and minimize quality variations.
Numerical display in standard brightness units.
Several times the range of competing sensors.
Adjustable sensitivity.
Variable projected-light intensity enables flexible operation over wide range of distances and materials.
|
|
|
|
Inspection machines : NDT, Visual inspection, ...
