|
|
Food product processing requires a variety of operations, such as sorting based on dimensions, shape and colour, on processing lines that run at very high speeds.
LMI's non-contact sensor vision technologies are ideal for such applications. Integrated into a single rugged and lightweight housing, our sensors dramatically reduce the costs and calibration challenges associated with machine vision component implementation. This measurably increases the quality of the final product by supplying our customers with synchronized real-time data for 100% inspection via smart sensors.
Our Food applications division works closely with System Integrators & Original Equipment Machine Suppliers to deliver the most effective solutions for their particular sensor vision needs.
|
|
Measurement repetition accuracy from ±3 µm
Graphic user interface visiTeach® for creating and storing new inspection and test sequences
Easy and precise positioning of the specimens with universal holders (glass L and V rails)
Data provision for creating test reports
Suitable for use under workshop conditions
The specimens can be tested and measured according to the following criteria:
General presence check
Thread present
Thread root, thread lead, external thread diameter
Check for foreign parts and chips
Measurement of the external shape, i.e. length, diameter, area, chamfer, radii, thread, angle, grooves, cones, number of cogs on cogwheels etc.
Centricity test |
|
| The Verimet U1000 System is a Modular Automatic Universal Instrument (MAUI) designed to perform gaging, nondestructive eddy current testing, and other real time measurement supplier of data acquisition operations. The U1000 replaces all the eddy current and gaging instruments previously sold by K. J. Law Engineers over the years with a single modular instrument system having all their capabilities and more. The U1000 can perform eddy current testing from ultra-high frequency flaw detection to low frequency hardness verification and case depth prediction. Its gaging capabilities process input from LVDTs and Air Circuits to perform difficult dynamic measurements, and includes advanced filtering and spindle-compensation capabilities. The U1000 was developed using the latest hardware and software standards to allow it to integrate with other devices and systems and to evolve with emerging standards. |
|
| High quality, flexible and handheld Digital Video microscope with side viewing BGA zoom lens (4x zoom factor) and brilliant image quality for Visual Inspection, Digital Image Recording and Dimensional Measurement of BGA, uBGA, CSP and Flip-Chip packages and all other SMT or Through-Hole components on printed circuit boards. |
|
The 1550 is an easy to use handheld entry professional level TDR. It is optimized to help the field engineer find the most common first line faults, the 1550 can be used across a broad range of applications including telecom, CATV and power. The unit provides both short range and long range faultfinding capability.The unit has advanced features such as a patented timing circuit and swept gain for ease of fault professional identification. It has been designed with ease of use and accuracy to provide the operator with an unparalleled level of performance to mitigate typical service affecting faults.
key features
- Universal applications unit.
- Ease of use.
- Swept gain algorithm. |
|
X-Strata980 for analysis of trace elements and coating thickness
Combining a high power X-ray tube and high resolution detector, the X-Strata980 X-ray Fluorescence professional analyzer delivers limits of detection in single digit ppms!
Oxford Instruments offers a full range of instruments dedicated to the electronics manufacturing industry. Our XRF instruments are available in different configurations; for RoHS compliance screening and testing. Please contact us to find out about the wide variety of solutions offered |
|
Universal coating thickness gage working on the coulometic principle to measure virtually all types of electroplated single or multilayer coatings such as chrome, nickel, cadmium, brass, silver, tin and zinc on metal or non-metal substrates.
This technique simply involves the removal of a small, almost invisible area of coating material. The substrate itself is not affected.
More than 70 combinations of coating and substrate can be measured with the standard equipment.
Measuring range: 0,05... 75 µm
Statistical evaluation with display of mean value, standard deviation, coefficient of variation, number of readings, highest and lowest single reading. |
|
OSPrey800 - A revolution in OSP thickness measurement
OSPrey800This instrument measures Organic Solderablity Preservative (OSP) thickness on the individual pads of real-time production boards. The ability to target individual pads allows specific quality control, failure analysis and troubleshooting of the OSP layer. The OSPrey800%u2019s unique non-destructive quality control technique requires neither test coupons nor sample preparation and significantly reduces the time needed to take measurements and operator error.
Other techniques for measuring OSP thickness are either destructive, labor intensive, or expensive. The OSPrey800 utilizes an innovative new technique in which various wavelengths of light are aimed at a sample and the light reflected from the surface of coating and substrate is analyzed to determine coating thickness. Typical thicknesses from 0.035-3µm can be measured and analyzed.
|
|
Simple:
• Fast measurement of total coating thickness
• Large, easy-to-read LCD with menu-driven user interface
• Two-button operation
• Ready to measure - No adjustment required to measure most coatings
• Hand-held, battery operated (2 AA)
Durable:
• Sturdy compact design is solvent, acid, oil, water and dust resistant
• Rugged carrying case
• One (1) year warranty
Accurate:
• Proven non-destructive ultrasonic technique conforms to ASTM D 6132
• Certificate of Calibration showing traceability to NIST included with every gauge
Versatile:
• Mils/Microns switchable
• Internal Memory stores up to 1000 readings
• Continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring
• Flip Display enables right-side-up viewing whether the gauge is in your hand or on a table
• Backglow display for dim or dark environments
Range* 1 - 40 mils 25 - 1000 um
Resolution 0.1 mils 2 um
Accuracy +(0.1 mils and 3% of reading) +(2 um and 3% of reading
Body: 137 x 61 x 25mm (5.4" x 2.4" x 1")
Weight: 170g (6oz.) without batteries
Conforms to ASTM D 6132
Gauge comes complete with probe, precision plastic shims, couplant(MSDS), durable carrying case, 2 AA batteries(MSDS), instructions, Certificate of Calibration traceable to NIST, one (1) year warranty. |
|
Simplicity:
• Larger, easy-to-read LCD with menu-driven user interface
• Instant automatic gauge setup
• Two-button operation
• Auto power-up on built-in probe gauges;
• Auto power-down on all gauges
• Average zero feature. Ideal for zeroing on rough substrates
• RESET feature instantly restores factory settings
• Instructions on back of each gauge
Rugged:
• Wear-resistant sapphire probe tip
• Solvent, acid, oil, water and dust resistant
• Readings unaffected by vibration
• One year warranty
Accuracy:
• Certificate of Calibration showing traceability to NIST included with every
gauge
• Exceptional accuracy as specified on Ordering Guide Page.
• Matching calibration standards and procedures available for every gage.
• Conforms to national and international standards
Versatility:
• Mils/Microns/mm switchable
• Easily adjustable to any known thickness
• NEW - selectable display languages including: English, Spanish, French, German, Portuguese, Japanese and Italian
• Backglow display for dim or dark environments
Three feature specifications are available. Basic (1), Standard (2), Memory(3)
PosiTector® 6000 are available for measuring:
Non-magnetic coatings on FERROUS metals (Steel & Cast Iron) "F" range.
Non-conductive coatings on NON-FERROUS metals
(Aluminum, Copper, etc.) "N" range.
Combination - ALL METALS above, etc. "FN" range.
Measuring Ranges: from 0 - 60 mils/ 0 - 1500 um to 0 - 750 mils/0 - 20mm are also available. |
|
| Thickness is an important process parameter for the prevention of tool or machine damage or to monitor product quality according to ISO 9000 in blanking presses, slitting lines, cut-to-length lines, scroll professional shears and other coil processing machinery. Continuous thickness measurement makes the monitoring of the cost of purchased material possible. ROLAND has single sensor measurement systems as well as non-contact dual probe systems available. The systems function according to the magnetic, inductive, or capacitance principles. Detailed measurement protocols according to SPC criteria provide objective information for negotiating with coil suppliers. |
|
21PlusTM is the ultimate measurement and control system and the highest performance gauging platform available to the industry. It incorporates the deep experience born of EGS’ CIMLine, Tracerlab, LFE, Soter and System 21 heritage and embeds it in a wholly new electronic package.
|
|
Core fracture detection at die – casting processed critical components made from light metal like aluminium or magnesium .
The light metal transparent professional metal detector of the MMD – series detects broken off cores residing in the cast part. STL’s unique Magnetic Field Measurement Technology offers an innovative solution for a yet unsolved problem.
This opens new dimensions for quality management in Light Metal Casting.
This new technology is also more precise, faster and cost saving than X-ray or Ultrasound test procedures.
The detector offer the following advantages :
• The sensor is the only additional system in the
production process
• Also for existing equipment by integration in
professional robot professional software
• Short measurement time, ideal for high
throughput production environment
• Maintenance free
• Reliable even at high interference level
++++ STL is looking for a distributor with excellent
contacts to the Aluminum Industry for this product++++ |
|
The CANIN+ instrument provides two methods for investigating and assessing the corrosion of steel in concrete.
• Measurement of corrosion potential of the reinforcement
• Measurement of electrical resistivity of reinforced concrete components
The instrument highlights corrosion activity before rust becomes visible.
This early detection can be key in preventing an unanticipated structural failure.
The measurement of the corrosion potentials is performed on the concrete surface with a rod industrial electrode and is non-destructive. On large areas like bridge decks professional wheel electrodes proved to be very useful.
The Windows based professional software CANIN ProVista, developed by Proceq SA, makes it possible to download, present and edit data measured by the CANIN+ half-cell instrument in a fast and easy way. The program generates graphs and diagrams that are the basis for an efficient interpretation.
A low concrete resistivity means a high probability for corrosion of the reinforcement and also a higher corrosion rate.
|
|
Dual Element transducers used to measure thickness, detect flaws and corrosion in thin materials, especially where near surface resolution is required.
They focus very close to the front surface, making them ideal for corrosion and pitting tests, braze inspection and lamination evaluation. |
|
Cygnus 2 - Hands Free
Multiple Echo Ultrasonic Thickness gauge
The new Cygnus 2 is the smallest, lightest and most durable through coating thickness gauge available. Designed for use in rope access or belt mounted applications where the end-mounted LED display can be easily read whilst taking measurements. The Cygnus 2 is supplied ready to use as a complete kit in a protective carry case. |
|
A Half Cell gauge measures the condition and potential corrosion of rebars and steel structures in concrete. When corrosion occurs the ferric oxide protective layer surrounding the concrete breaks down allowing an electrochemical reaction between the steel and the concrete.
In the half cell test, the reference electrode is passed over the surface of the concrete and the potential voltage difference is recorded. The readings show where corrosion is likely to be or is currently present. Periodic monitoring of the condition of the rebars and metal supporting structures in professional buildings, bridges etc. identifies signs and severity of corrosion - long before there are any physical indications of damage. Thus enabling more accurate forecast of projected lifetime.
Elcometer have three half cell gauges in their range, Elcometer 331˛ Models BH, SH and TH - each combine the Half-Cell technology required to assess potential corrosion of rebar, with the features necessary for any covermeter. Each gauge can be connected to either Cu / CuSO4 (copper / copper sulphate) or Ag / AgCl (silver / silver chloride) half cell electrodes and, by using the on screen menu commands, change the gauge to record covermeter depth measurements.
Combining half cell corrosion potential measurements with depth of cover measurements, in one easy to use gauge, makes the Elcometer 331 models the ideal surveying products of their type in the market today.
Elcometer offer a comprehensive range of concrete inspection equipment to meet all of your requirements.
|
|
Reprogramming for a different material, setting units of measurement and selecting the display backlight is simply done by connecting to a Stresstel T-Mike E thickness measuring or to your Computer.
The T-Mike P is supplied with a 1/4" - 5MHz, dual element transducer. A wide range of other transducers to meet your application requirements is available.
Key Features:
- Single key operation
- Pre-calibrated for your material
- Rugged metal case and industrial keypad
- 300 hours life with (4) "AA" alkaline batteries
- Two year warranty
The unit also auto-calibrates and has start up testing. A custom material can also be added by connecting the T-Mike B to a T-Mike E thickness gauge or to your Computer.
The T-Mike B is supplied with a 1/4" x 5 MHz dual element transducer. A wide range of other transducers to meet your application requirements is available.
Key Features:
- Simple intuitive operation
- Pre-calibrated for five materials -
steel, stainless steel, aluminum, cast iron & plastic
- Rugged metal case and industrial keypad
Fast and easy calibration for a wide variety of metals and plastics including steel, stainless steel, aluminum, cast iron, plexiglass and more. The T-Mike E is supplied with a 1/4" x 5 MHz dual element transducer.
Key Features:
- Auto calibration
- Sealed case
- Amber coloured display
Thickness readings are stored by simply pressing the ENTER key. Readings can be sent directly to a professional printer or downloaded to a PC with the supplied software.
The T Mike EL is supplied with a 1/4" x 5 MHz dual element transducer. StressTel offers a wide range of other transducers to meet your application requirements. |
|
Cygnus ROV MOUNTABLE
Multiple Echo Ultrasonic Thickness Gauge
Cygnus Instruments offers two dedicated ROV mountable thickness gauges. These units have been designed to be mounted onto most types of work class ROV with a industrial manipulator facility.
The shallow water version is pressure tested to 1000 m and the deep water version is pressure tested to 3000m. Dedicated software professional displays the time, date and thickness readings on the surface and all of these can be stored or logged. |
|
Elcometer 236 DC Holiday Detectors
The Elcometer 236 holiday detector is perhaps one of the most advanced holiday detectors on the market today. Supplied in a convenient transit case for moving around the jobsite, the Elcometer 236's soft carry case allows the probe handle and wide range of accessories to be attached making the Elcometer 236 ideal for field, site or laboratory inspection.
|
|
| The MIZ-21B offers all of the technology, packaging, and user interface enhancements of the MIZ-21SR. It incorporates the power of dual-frequency testing, digital conductivity testing, and nonconductive coating thickness measurement. Its industry standard 50-ohm probe drive provides the optimum balance between probe input and instrument output. Yet it's priced to provide excellent value when you need a dedicated eddy current instrument. |
|
GE Inspection Technologies is a leading developer of eddy current instruments, industrial testing machines, and detection for industrial applications requiring surface and sub-surface crack detection and metal sorting. GE Inspection Technologies' non destructive eddy current testing equipment and solutions will meet the critical requirements of your unique application and deliver productivity, quality, and safety.
|
|
Verimation’s Verimet® 7700 Portable Eddy Current Professional tester is a portable micro processor-based eddy current instrument for heat verification, alloy sorting, hardness inspection and case depth testing of ferrous metal parts. Versatile and accurate it offers improved capabilities for a wide range of applications. The instrument is compact, lightweight and battery equipped so it is very easy to use.
|
|
| One compact, handheld professional tester now combines more of the technologies you need to test aircraft. The MIZ-21SR combines eddy current with two types of bond testing methods - resonance and sondicator. It also includes a built-in mode to measure conductivity and coating thickness across a broad frequency range - from 60 kHz up to 480 kHz. The MIZ-21SR employs the latest technology for superior flaw detection. High-gain input stages combined with noise-suppressing synchronous demodulation circuitry results in the best signal-to-noise ratio in the industry. The combination of a 16-bit A/D industrial converter with high-gain analog circuitry maximizes sensitivity and signal resolution. |
|
The inspection, winding device,
ISN NO STOP, allows a check of the fabric quality;this machine can be interfaced with the exit of Rameuse, or other machine kind calendar, without stop it. Tanks at the linear geometry of the drawing, to the sensitive system of synchronization and the motorization of all the rolls of delay fabric, the machine is excellently for the verification of elastic fabrics to sweater and shuttle.
Besides, thanks to the management from SUPPLIER OF PLC interfaced to industrial inverter, the operator can modify in real time tension fabric and hardness roll.
Other products:
- INSPECTION MACHINE MOD. ISR 07® TENSIONLESS FOR ELASTOMER
- INSPECTION MACHINE MOD. ISN 240 NOSTOP for REMUESE EXIT
- INSPECTION MACHINE Mod. ISN 260 TROPICALIZED
- INSPECTIONE MACHINE Mod. ISP 180 PLAIT / ROLLS
- INSPECTION + PACKING MACHINE SUPPLIERS Mod. ISP 240 NOSTOP + IMB SA for REMEUSE EXIT
- INSPECTION M/c mod. ISP 180 with SWITCHING
- INSPECTION MACHINE Mod. ISS SPECIAL for wool, elastomer and precius
- INSPECTION MACHINE Mod. ISD FRONT-REAR FOR TUBOLAR FABRICS
- INSPECTION TABLE Mod. ISG FOR GREY FABRIC |
|
|
|
Inspection machines : NDT, Visual inspection, ...
