|
|
| Products 91 to 120 of 165 |
IROX DIESEL Analyzer
Portable Diesel Analysis with MID-FTIR
IROX Diesel is a Mid-FTIR analyzer dedicated to Diesel analysis: With a different spectrometer cell, it's own on-board software and a vast calibration library handling is as easy as with the gasoline unit. This instrument also uses an improved calculation model, based on Cluster analysis and MLR, for the determination of the key properties of diesel fuel such as Cetane Number, Cetane Index and Distillation Properties. Fast and easy on-site custom calibration by adding a new sample in less than 4 min.
A spectral resolution of 4 cm-1 ensures results with highest precision in less than 3 min.
IROX DIESEL has been upgraded for a new application: the determination of the FAME (Biodiesel) content in Diesel Fuel.
Features
* Cetane number (correlation to ASTM D 613)
* Cetane Index (correlation to ASTM D 976)
* Cetane Improver
* Total Aromatics (correlation to ASTM D 5186)
* FAME (Biodiesel) content in Diesel Fuel
* Polynuclear Aromatics (correlation to ASTM D 5186)
* Distillation Properties: T85, T90, T95 (correlation to ASTM D 86)
* Built-in Density Meter
* Temperature control
* Fully automated
* No sample preparation: just press RUN
* No complex technical training required
* Small sample volume: 7ml
* Measuring time: 3 minutes
* Fast and easy on-site calibration of the correlation library
* Optional 6-position sampler
* Portable for field applications
* PC/printer interface
* MINIWIN IROX-PC software |
|
IROX 2000 Fuel Analyzer
Portable Gasoline Analysis with MID-FTIR
IROX 2000 is an extremely compact, robust and user friendly Mid-FTIR spectrometer for the automatic measurement of the concentration of the most important components of gasoline. Thanks to an improved mathematical model and the use of a built-in density meter the instrument additionally provides most reliable results for key properties such as Octane Numbers, Distillation Properties and Vapor Pressure. A large number of country specific calibration samples is stored. Outlier fuels can be easily added even without a PC.
The portability and vehicle battery options are ideal for on-site field use.
Features
* 9 Specific Oxygenates (ASTM D5845)
* 14 Specific Aromatics and Benzene (ASTM D6277, EN238)
* Total Parameters: Aromatics, Oxygen, Olefins (incl. Di-Olefins) & Saturates (correlation to ASTM D 1319)
* Octane numbers: RON, MON (correlation to ASTM D2699, D2700)
* Calculation of AKI and Drivability Index
* Distillation properties: IBP, T10, T50, T90, FBP, E200, E300
* Vapor Pressure (correlation to ASTM D5191 and D6378)
* Optional 6-position sampler
* Built-In Density Meter
* Automatic Sample Introduction
* Small sample volume: 7ml
* Fast & easy on-site calibration
* Laboratory and Field Applications
* MINIWIN IROX-PC software |
|
Model HPM 4/6 portable vacuum meters are compact, hand-held, digital display, battery operated control units. When combined with the Hastings Instruments rugged thermopile sensors, they become vacuum instruments designed for portability and ease of use in applications where AC power is not readily available.
The lightweight control units operate with a standard 9 volt battery, and are available for display in units of Torr or mbar. Additionally, they can be calibrated to an individual sensor or set for average sensor output to test many different sensors of the same type. They are switchable to offer display for both the DV-6 (0.001 to 1 Torr) and the DV-4 (0.01 to 20 Torr) sensors without re-calibrating. These sensors are rugged, noble metal sensors which are resistant to corrosion and can be ordered with a variety of system connections to meet your system's requirements such as VCR(R), KF 16, KF 25, Glass, MiniConflat™, etc.
VCR is a registered trademark of Cajon Company.
MiniConflat is a trademark of Varian Associates, Inc.
|
|
All Isco brand portable samplers are built to withstand harsh environments and hard service.
- Vacuum-formed ABS plastic shell withstands exposure and abuse.
- Twin-wall construction with foamed-in-place insulation maximizes structural integrity along with the efficiency of ice used for sample preservation.
- NEMA 4X, 6 (IP67) controller rating for submersible, watertight, dust-tight, and corrosion resistant service. |
|
Sievers 900 Portable TOC
The Sievers 900 Portable TOC Analyzer, weighing only 12.5 kg and measuring 35.6 x 22.3 x 46.5 cm, is the first portable TOC analyzer of its kind, bringing the lab to the field. It can be hand-carried anywhere for on-line measurement, used for grab samples, or connected to an autosampler for high volume applications in a laboratory. It requires no external reagents or gas supplies and boasts a four-minute analysis time and a 0.03 to 50 ppb measurement range.
The 900 Portable’s color touch-screen display provides an intuitive menu to quickly establish operating parameters, such as setup and automated calibration procedures, and to graph historical or real-time data. A USB drive enables easy data transfer.The Analyzer was engineered for ease of use and cost-effective operation, requiring no external reagents or gas supplies. It typically needs only a few hours of preventive maintenance annually.
The Sievers 900 Portable won Instrument Business Outlook’s 2005 Gold Award for Best Portable Analytical Instrument Industrial Design. |
|
Handheld measuring instruments for connection of one or several
sensors, with microprocessor and memory. The instruments can be
operated via battery or mains. The AUTO store function allows the
units to be used as a data logger. The stored measured values can
be read easily and processed further on a PC with the corresponding
software. Depending on the requirements, the instruments are
equipped with temperature and pressure measurement facilities
Calibration solutions are supplied for the calibration of the instruments.
An instrument case is available as an option. |
|
The 8930 Includes:
* 900 MAX Portable Sampler Controller (P/N 8972)
* Center Section (P/N 8922)
* Cover (P/N 8890)
Components to complete the system:
* Power Source/Battery Chargers
* Intake Tubing and Strainer
Optional Components:
* Base/Bottle Tray, Composite/Multiple Bottle Accessories
* Pump Tubing
* Factory Installed Options
* Support Software and Data Transfer Unit
* Cables and Interfaces
* Accessories
For pricing, part numbers, and assistance in configuring your Sigma Portable Sampler to fit your application please call Hach: 1-800-227-4224
Sampling for regulatory compliance, monitoring or combined sewer overflows, storm water outfalls, and water quality research may demand a sampler with greater sophistication and capability. If so than the Sigma 900 MAX Controller is what you need. |
|
Pycnometer, Model 290
To measure the density of coating materials and similar liquids. Robust and light weight design, made of black anodized aluminium, or alternatively, stainless steel. Available for 50 or 100 ml capacity, also with official calibration certificate. |
|
Isco developed the first refrigerated sampler designed to be used outdoors without an enclosure, and continues to set the standards for weather and corrosion resistance.
The all-new Isco 4700 Refrigerated Sampler is purpose-built to survive outdoors for wastewater compliance monitoring.
Our 6712FR refrigerator gives you field-proven, trouble-free sample preservation and dependability in harsh environments, along with the most advanced sampler controller available. |
|
PRODUCT RANGE GENERAL PRESENTATION
The electronic allows the vibration of the viscometer and processes the amplitude variations in order to deliver a linear viscosity response.
7000 RANGE
• Viscosity and temperature transmitter
• Maximal process temperature 100°C
• Mounting on standard DIN rail
• Analog output 4-20 mA
• RS 485 output
800x RANGE
• Viscosity controller
• Maximal process temperature 200°C or 300°C
• Flush-type mounting
• Analog output 4-20 mA
• RS 485 output
• Output relay (switching power 2A - 250VAC)
OPTIONS :
• Viscosity and temperature processor
• Temperature compensation
• additional analog output 4-20 mA
• Viscosity controller (All or nothing, PID)
|
|
Loveland, Colorado, October 2002 — For the first time, an on-line sludge volume index measurement can provide wastewater treatment plant operators early warning of upset conditions. With Hach’s OptiQuant SVI Analyzer, operational decisions can be based on Sludge Volume results that have been determined objectively and accurately.
The analyzer gives operators a reliable, continuous analysis of Sludge Volume without frequent minimal intervention. The in-situ measurement provides accurate analysis by measuring a true representative sample directly in the aeration basin. In addition, the OptiQuant SVI Analyzer saves valuable time with on-line analysis and graphical display of the settling curve. This eliminates the need for manual plotting to determine sludge age and return activated sludge flow rate.
During a measurement cycle, the OptiQuant SVI Analyzer utilizes a sampling vessel that is submerged in the aeration basin. Liquid is purged from the vessel with air from a built-in air compressor. When the sampling vessel is full of air, a valve is opened, allowing the sludge to enter. A sampling orifice allows solids particles and flocs to remain intact within the vessel, without the aid of moving parts. The settling rate and final settled sludge volume are measured with the Infra-Cam™ device inside the sampling vessel. With the addition of an OptiQuant TS-line suspended solids probe, the analyzer calculates the Sludge Volume Index.
The OptiQuant SVI Analyzer is a convenient tool for the continuous monitoring of Sludge Volume and Sludge Volume Index in-situ, with objective, accurate results. |
|
The Polymetron 9245 provides low-level sodium measurement in high purity water applications. With a detection limit of 0.01ppb and a range of 0-10,000ppb this analyzer is ideally suited for monitoring sodium in demineralized water, boiler feed, condensate and all parts of the steam/water cycle.
The instrument has a grab sample feature for manual calibration and measurement of one-off process samples after which the unit automatically returns to on-line monitoring. It is specially designed for low total cost of ownership.
-Measures sodium levels from 0-10,000ppb with a detection limit of 0.01ppb
-Automatic reactivation ensures optimum electrode operation and response time
-Unique temperature compensated constant pH buffering is provided
|
|
The very short response time of the COBRIX3 allows quick line start-ups after a change of product. There are no drifts and no delays. Cobrix3 continuously measures °Brix, Diet, CO2, alcohol, temperature, pressure, sugar inversion, extract, original extract, degree of fermentation, oxygen and conductivity. The COBRIX3 provides real-time data which allows quick and effective adjustment of the blender and carbonizer.
Production efficiency is improved by significant savings in syrup and CO2 . Throughout the production run, warning lights, sounds and PC messages give you time to make adjustments to the line before product goes off spec, or before the Cobrix3 multibev stops the production line. Connect Cobrix3 to the network for real-time data monitoring and control from any PC in the plant. Brand-specific settings such as target values, alarm limits, etc. can be stored using the supplied software and recalled for a virtually unlimited number of different beverages. Among many other selectable indications, line start/stop information is displayed. Alarms are indicated optically and acoustically, and by highlighting the corresponding measuring values on the PC display. |
|
TOC/TNb analysis for all matrices
The new generation of our TOC analyzers represents the consistent development of the successful concept of our proven TOC/TNb systems. Beside catalytic high-temperature oxidation at up to 1,000° C and high-sensitivity NDIR and chemiluminescence detectors, this concept is based on innovative technological solutions for signal analysis (VITA technology) and high particle-handling capacity (special valves and septum-free injection heads).
The multi N/C series consists of five analyzers covering the range from budget-priced, but powerful instruments for environmental analysis to high-sensitivity, extremely flexible systems that are suitable for most diverse applications, such as the analysis of ultrapure water, drinking water, surface water, waste water, slurry and solids. With the multi N/C 2100, another innovation has joined the series: a "double-furnace? system providing TOC analysis of liquid and solid samples without requiring an additional solids module.
multi N/C UV HS: a TOC analyzer with UV-supported wet-chemical digestion principle ? an ideal tool for the analysis of ultrapure water, drinking water and similar samples Internationally, the diversity of TOC analyzers provided is unique and ensures the right technical solution for every possible application. |
|
| Automatic analyzer for the continuous measurement of total organic carbon (TOC) in water, with automatic sample preparation and the capability to measure individual samples. |
|
Sievers 900 Series TOC
The Sievers 900 Series Total Organic Carbon (TOC) Analyzers are designed for organic analysis in ultrapure and municipal quality waters in pharmaceutical, semiconductor, municipal, and power generation applications. The four 900 Analyzers (Laboratory, On-Line, Portable, and the 5310 C for municipal water) offer exceptional ease of use, analytical performance, productivity, and reliability. The random-access 900 Autosampler provides high sample capacity and fast analysis.
The 900 Series TOC Analyzers are easy to set up, operate, and maintain. With minimal training, an operator can analyze samples in less than an hour. Unlike many competitive analyzers that use technologies such as non-dispersive infra-red, the 900 Series Analyzers require no external gasses or reagents, offer 12-month calibration stability, and usually require just a few hours of maintenance annually. |
|
CheckPoint TOC Sensor
The new CheckPoint Total Organic Carbon (TOC) Portable/On-Line Sensor from GE Analytical Instruments is the first and only battery-powered TOC measuring device. CheckPoint can easily be hand carried to any point in a water system for rapid diagnostic sampling and troubleshooting, or used on-line for continuous monitoring. It is designed for microelectronics, pharmaceutical, and power applications.
CheckPoint’s ultra portability, fast analysis time, and versatility enable new problem-solving and diagnostic capabilities at points of use away from power sources. The Sensor typically operates four to five hours using the optional battery, or continuously with AC power. It weighs just 3.6 kg (7.9 lb), and features a 15-second default measurement, adjustable in intervals up to eight hours.
The CheckPoint TOC Sensor has a dynamic range of 0.05 to 1,000 ppb, and can measure TOC in water with up to 1.4 uS/cm conductivity from CO2. CheckPoint also measures conductivity/resistivity and temperature. CheckPoint features an Ethernet (Modbus over TCP/IP) and a USB port for convenient data download. CheckPoint requires no reagents, and is easy to operate and maintain. Calibration is typically stable for six months. |
|
The new Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer can run thousands of diverse, high-TOC samples—including brine and cellulose—with unprecedented uptime. The Sievers InnovOx offers unmatched oxidation robustness, dynamic linear working range, and calibration curve stability for industrial process, wastewater and environmental water samples. It is compliant with EPA, Standards Methods and ASTM regulatory methods.
The tough and reliable Sievers InnovOx uses a patent-pending Super Critical Water Oxidation (SCWO) technique to achieve superior TOC recoveries regardless of organic compounds and particulate impurities in the sample. In addition, this new process removes all oxidation byproducts and sample between each analytical run, eliminating the need for frequent maintenance.
The Analyzer uses an enhanced Non Dispersive Infra Red (NDIR) design, which has no moving parts, to allow superior linear response. The NDIR has a dynamic detection range of 0.5 to 50,000 ppm, and is capable of measuring Total Carbon (TC), Total Inorganic Carbon (TIC), Total Organic Carbon (TOC), and Non-Purgeable Organic Carbon (NPOC.
The Sievers InnovOx has a Web interface for easy, remote monitoring, an intuitive touch-screen display, and three convenient USB ports. The InnovOx is easy to set up and operate and requires no external carrier gas. The InnovOx is ready to run immediately, as it needs no prior furnace heat-up or stabilization. Maintenance is minimal, keeping total cost of ownership low. Preventive maintenance and calibration are only needed every 6 months. |
|
ANATEL A-1000
TOC Analyzer
Ideal for monitoring ultrapure water production and measuring the influent and effluent water at rinse stations to ensure that cleaning is complete. Monitors both hot and cold water to detect and report the most rapid TOC changes quickly.
Detection limits from 0.05 to 1999 ppb TOC
Patented stopped flow and photocatalytic oxidation
Convenient serial, analog, and digital interfacing
|
|
The analyzer measures Total Organic Carbon in liquid samples using the EPA approved method based on UV persulfate oxidation and detection of
generated carbon dioxide using a Non Dispersive Infrared Analyzer. This
method meets also the requirements of European ISO/CEN guidelines. The
analyzer provides this measurements on liquid samples ranging from 0-10
mg/l to 0-5.000 mg/l. The analyzer is conformed to EPA, DIN, CE, ASTM,
NAMUR regulations.
Applications:
- industrial wastewater
- industrial effluents
- effluent and influent monitoring
- boiler feed water
- condensate and cooling water
- drinking water
- surface water
- process water
-....
|
|
* Total Organic Carbon (TOC) Reagent Set, Low Range Test 'N Tube(TM) includes: Acid Digestion Solution Vials, Low Range TOC, Bufer Solution (Sulfate), Micro Funnel, Indicator Ampules, Low Range TOC, TOC Persulfate Powder Pillows
* Method: Direct
* Range: up to 20 mg/L C
* 50/test |
|
AOX/TOX Analyzer; DEXTAR
The DEXTAR analyzer is designed for cost effective AOX and TOX analysis in a wide range of water and solids matrices.
Product Detail
Organic Halogens pose a threat to the environment and mankind. Most substances, which include organic halogens, are toxic, carcinogenic, persistent and bio-accumulative.For this reason regulatory authorities imposes maximum permissible levels of these compounds in soil and water.
Microcoulometry is the best reference method for the determination of total organic halogen content in environmental samples; it fully complies with ISO, DIN, CEN and EPA methods. These methods lead to fast, quantitative, economical and absolute results. De DEXTAR analyzer is ideal for laboratories performing a low number of AOX/TOX samples.
Applications:
• Drinking water
• Surface water
• Ground water
• Effluent water
• Influent water
• Waste water
• Cooling water
• High salt content water
• Process water
• Pulp & paper products
• Soil & sediment
• Sludge
• Waste oil
Options:
• The DEXTAR can be used as a horizontal or vertical sample introduction system |
|
MIVI PROCESS VISCOMETER FOR INLINE, ONLINE AND ON REACTOR APPLICATIONS
Simple, Rugged, Reliable, No wear part, Low maintenance, Operates in any position, Easy installation
GENERAL TECHNICAL DATA
• Maximum working temperature up to 200 or 300°C
• Maximum working pressure up to 60 bar or 150 bar (500 possible at request)
• Maximum viscosity range up to 1000 Pascal.second
• Watertightness of the body IP67
• Material 316L SS, Hastelloy, ...
• Protective coatings Diamolith, PTFE, enamel
• Exproof approval ATEX, FM, JIS
• Sanitary design on request
INDUSTRIES :
Petrol, Petrochemical, Chemical, Food & beverage, Cosmetics, Printing & coating
APPLICATIONS :
Polymerization control, Heavy fuel oil control, Inks control...
PRODUCTS :
Oil, Polymers, Fuels, Bitumen, Resins, Gels, Emulsions, Cheese, molasses, Paints, Inks... |
|
WALL MOUNTING INSTRUMENTS
with one "ON or OFF" threshold and one output function 4 - 20 mA :
- pHM 200 : pH meter
- CM200 : conductivity-meter
- OXYM200 : oxymeter
- CLM200 : chlorometer |
|
Ever more stringent legislative regulations witin the water and wastewater industry are placing increased demands on process orientated system technology. Especially in the wastewater treatment the on-line measurement of Nitrogen and Phosphorus parameters play an important role because of continuous monitoring and optimization of the performance of a biological purification process.
WTW’s answer is the multiparameter system TresCon.
TresCon is a modular analysis system for continuous measurement of analytical parameters like e.g. Ammonium, Nitrite, Nitrate / SAC, total Nitrogene or Phosphate and total Phosphate. This system based on a central controller and one or several autonomous modules is built up on a functional structure which constitutes a "analytical platform" of highest flexibility.
Due to this modularity this system assures a continuous and very reliable operation which constitutes a new dimension with respect to performance, flexibility, reliability and cost efficiency. Additional analyzer modules and parameters are easily accomplished by the user
|
|
SEKO introduces the 500 Series family of industrial control instruments designed for measuring:
■ pH
■ Redox
■ Oxigen
■ Conductivity
■ Turbidity
Design compliant with EMI regulations
All instruments comply with the 73/23 EC,89/336 EC,92/31 EC and93/68 EC directives,in order to guarantee maximum Electromagnetic Compatibility.
Serial Communication (RS485)
All instruments are designed for use with RS485 communication serial port,to monitor measurements and data recording.
Graphic Display
The graphic display,with 128x64 pixel resolution,ensures simultaneous display of the chemical measurement,the measurement of the temperature and the status of the various control outputs,by means oficons,throughout the entire process.
Power-assisted adjustment with probeeffectiveness test
The user-friendly software functions are designed to supply fast and effective assistance to the operator.This guarantees excellent calibration results.The system will inform the user about the quality of the electrode in use.
Flexible enclosure design
The enclosure allows various mounting options,such as panel,wall orpole mounting.
Control Functions
The instruments can be supplied with different software functions,ranging from Proportional-Integrated-Derived (PID),Timed and ON/OFF. |
|
| ”On-site” means measuring Ammonium and Phosphate in the tank. The main advantage is that short sample paths give quick, undistorted results. This is the idea behind the new digital analyser generation from HACH LANGE—AMTAX sc and PHOSPHAX sc. The concept is a practical, logical extension of the proven AMTAX and PHOSPHAX series. It combines all the advantages: the high precision of an analyser and the simplicity of a probe. |
|
|
|
Liquid analyzers
