|
|
| Products 121 to 150 of 288 |
Seven excellent reasons to choose ECTHA1000 Eurosit:
1) because it comes from a family of instrumets developed over a quarter of a century
2)because it is the only toll with its own specific updated correlation curves
3) because it has the widest measuring range suitable for concrete with values from 50-120 N/mm2
4)because it is backed by the support of a state of the art research and development centre for non destructive testing in civil engineering applications
5)because its innovative design is unmatched in its cleass
6)because it is the only tool eith a comprehensive range of functional intelligent accessories for rapid and direct analysis
7)because its designe is based on valid and fully documented scientific research |
|
Microprocessor meltingpoint measuring instrument with interface RS-232.
Measuring Range: 25-400 °C
Accuracy: up to 200°C +/- 0.3°C; 200°C-400°C +/- 0.5°C
Display: LCD Grafik Display
Heating Rates: to 300°C approx. 4min; to 400°C approx.7.5 min
Dimensions: 230x210x110 |
|
A completely passive microwave receiver that is very stable and compact and measures the thermal radiation of the atmosphere at different elevation angles. Using unique algorithms to retrieve the temperature profile.
|
|
PASCAL LAB ET, touch-screen multifunction calibrator for lab applications dedicated to the measurement/generation of electrical signals/temperature:
- modular configuration: up to 2 input and 2 output modules for both generation and measurement of the electrical signals ( mA, mV, V, Hz, ohm, Pulse) /temperature (TC e RTD)
- -uncertainty up to 0,008% rdg.
-display touch-screen with 4 variables simultaneously indicated
- huge memory, bi-direction and real-time communication to PC
-large memory storage for the calibration procedures, data and reports
|
|
The ecom MCAL 4200 Multi-Function Calibrator provides a feature set unmatched in high accuracy,hand-held calibrators in its price range.The MCAL 4200 Calibrator provides the functions and accuracy associated with fixed-installation,laboratory instruments,and has everything needed for virtually any calibration task.Measure and source thermocouples,RTDs,current,voltage, and frequency,and source pulse trains.
|
|
The Memocal 2000 is a lightweight, versatile, portable, hand-held calibrator developed for use in both field and laboratory calibration
maintenance, quality control and process simulation.
- Very low temperature drift (0.1Vµ°C)
- Accuracy: 0.015% of span
- Power supply: standard AA size battery (Alkaline, NiCd or Ni-MH)
- Measurement & generation of TC (15 types), RTD, linear and ohms signals
For field calibration the Memocal 2000 offers: compact size, long battery life, easy to use interface, low temperature drift, high noise immunity
and simple programming capabilities.
For laboratory calibration the Memocal 2000 offers: digital interface to data loggers or supervision and control systems, large range of I/O
capabilities, high accuracy and stability over time.
|
|
PASCAL: Portable Advanced Touch-Screen Multifunction Calibration Station
PASCAL 100, the most powerful and user-friendly calibration station:
- modular configuration: up to 2 input and 2 output modules for the electrical signals/temperature , up to 6 pressure sensors
- large memory storage for the calibration procedures, data and reports
- wide touch-screen display with 4 variables simultaneously indicated
- high resolution and high accuracy: up to 0,01% for pressure, 0,008% for the electrical signals
- suitable for process instrumentation calibration as well as process calibrator units
- real-time bi-directional communication to PC
- fast and easy maintenance through the input & output plug-in modules and recalibration procedures
SPECIAL APPLICATIONS
1.avionic engineering units available for avionics/military applications
2.turbine control through the pulse generation and counter functions
3.flow computer control through the simultaneous combination of the input channels
4.thermo-elements calibration through the comparison method: two simultaneous measure channels required
|
|
Multifunction meters from AHLBORN are suitable for the adaption of various sensors and are able to measure and store the data of nearly all physivcal, chemical and electrical variables. Also sensors with a non linear output signal are adaptable. Sensor specific linearisations can be programmed easily by the user. The linearisation will be stored inside the intelligent sensor connector. Between 5 to 9 sensors are adaptable depending on instrument version. The devices are easy programmable via menue guided displays. The indication of up to 3 measuring values is possible on the large, illuminated display. The indication can be also a grafic or a measurement list. The measurement values can be stored in the device or directly be transfered to a PC, either per cable or wireless. Complete software programms are available for professional data acquisition. The company AHLBORN offers with its flexible dataloggers and multifunction devices many possibilities for each kind of application and measurement task. The ALMEMO measurement techology is future orientated and easy to handle.
|
|
m3/h, m/s, CO2, %RH, °C, DP, Lux
Instrument memory for up to 10,000 measurement values
PC software for analyzing, archiving and documenting the measurement data
IAQ probe, Lux probe and Comfort Probe
Vane measurement and integrated differential pressure probe for Pitot tube measurement
Wireless probes for temperature and humidity |
|
°C, %RH, °Ctd, g/kg, hPa, m/s, m3/h, ppm CO, ppm CO2, U/min, mA, V
Simultaneous measurement at several measurement locations
Data logger function
Freely usable probe inputs
1 to over 200 measurement channels
Data transfer with the Testo data bus
Modular setup of system components |
|
DTM 550 FEATURES
Temp:-20~ 100
Humidity:0 ~ 100%RH
3 1/2 Digit, Back light display
Use highly accurate RTD temperature sensor
MAX, DATA, HOLD function
Automatic low battery indication
Valox housing to withstand accidental
DTM 550SPECIFICATIONS
Measurement Range: Temp:-20 ~ 100
Humidity: 0 ~ 100%RH
Temp. Accuracy: }0.5-0~50, }1-20 to 0,50 to 100
Humidity Accuracy: }2.5% RH (10% to 90% RH) ;}5% RH (90% RH)
Operating Environment: 0 to 50 at <75% relative humidity
Resolution: Temperature:0.1; Humidity:0.1% RH;
Sensor: Pt385/1000¶,RTD temperature sensor
General
Power Requirement: 4 pieces 1.5V (AAA size) batteries
Dimensions: 6.7"x1.7"x1.6" (170x44x40mm)
Weight: 6.3 oz(180g)
Accessories: Soft carrying case, batteries, owners manual |
|
The ASC300 is substantial enough to cover all your needs for a process signal calibrator with superior accuracy and compact enough to fit into your tool box and operate with one hand for easy field calibration. The ASC300 can change your entire calibration regimen for signal, pressure, and temperature. You can combine this versatile calibrator with the JOFRA APM external pressure modules or a JOFRA dry-block calibrator to meet your calibration needs.
The JOFRA ASC300 offers simutaneous input and output. This means that you can calibrate and adjust a temperature transmitter on the table with no other necessary instruments.Output the sensor signal and input the mA from the transmitter. If you select mA Loop the JOFRA ASC300 will also supply the 24 VDC for the loop. In the display you will see both your output temperature and the return mA from the transmitter. Enter the zero and full scale values and you can make quick 25% steps or go direct to zero or full span values. The JOFRA ASC300 has dedicated keys for this operation so adjustment on the transmitter is made easier. |
|
Introduction
Beamex's range of portable MC-calibrators for field calibration is known for their accuracy, versatility and also for meeting both high and uncompromised quality standards. Accuracy is assured when you decide to buy any of Beamex's portable MC-calibrators, because they all come with a traceable, accredited calibration certificate.
Benefit from using Beamex calibrators:
* Very high accuracy
* Simple to use
* All-in-one functionality
* Robust casing
* Customization possibilities
* Extensive after-sales services
|
|
Scandura multifunction calibrator model B-20, well known device in the calibration field (ATEX version available), has been improved to satisfy the specific requirements of the gas plant operators.
The improvements embedded started from a detailed study led at the laboratories of Gaz de France, which have underlined some requirements specifically tied to the gas field. Major improvements concern:
- new absolute pressure transducers (internal and external);
- all the connectors have been placed on the front panel (external transducer and connectors RS232 battery recharger etc.);
- special metal case;
- possibility to use the instrument in extreme;
- environmental conditions without any risk of damaging due to water infiltration, mud and dust.
Provide more GAS to your calibrations!
|
|
| Many manufacturing processes involve either the heating or cooling of products, and it is essential for operators to be able to monitor the operating temperature of critical areas of the process. In many cases it is not possible or practical to use thermocouples. e.g. the object is too big, is moving or precludes contact measurement. The IRISYS on-line imager makes all these tasks simple by providing 256 temperature measurement points without contact. The information from the imager can be transferred to a controller and thresholds can be added for alarm activation. Typical applications include alarm monitoring and process control applications in the glass, steel, rubber, plastic moulding and petrochemical industries. |
|
The Zetasizer® Nano simplifies measurement of particle size, stability characterization using zeta potential, and molecular weight, for a wide range of dispersions, emulsions and molecules in solution. The technology in the system provides the sensitivity required for the measurement of proteins and polymers, as well as the ability to measure inks, pigments and emulsions at high concentrations. It is the method of choice for nano-particle applications from routine colloid size measurements to the investigation of particulates at the leading edge of materials research. Patented technologies ensure optimum performance for particle size measurement over the range 0.6 to 6000 nm, molecular weight measurement from 1 x 103 to 2 x 107 Daltons, and zeta potential of particles from 5 to 10 µm.
A unique disposable capillary cell for zeta potential measurement eliminates cross contamination; a wide range of cuvettes is available for different applications. The %u2018chromatography flow-mode%u2019 option allows the system%u2019s use as an in-line chromatography detector for protein applications, conferring the ability to perform Absolute Size Exclusion Chromatography (ASEC).
The optional MPT-2 autotitrator simplifies trend measurements and enables the measurement of size and zeta potential as a function of pH, conductivity or additive. Software includes solutions for 21CFR Part 11 compliance, customised reports, data export and an expert system approach for result quality assessment.
|
|
| The Series 4000 Capacitec® amplifiers and racks were designed to offer the best signal to noise ratio and wide band width response options in a simple modular package. The 4000 Series was built upon our 20 year proven foundation of 3000 Series amplifiers (3101-SP, 3200, 3201-SP) still in operation. Utilization of individual pins in a 32 pin DIN connector increases reliability for more industrial applications where vibrations are present. The small Euro-style 2U size boards have appeal for small portable packaging as well as high (but lightweight) density applications. When coupled with Capacitec® non-contact displacement probes, they produce a linear output voltage proportional to the gap spacing between the probe and a ground plane. The systems are designed to produce stable and reliable operation with excellent gain and zero shift stability with respect to changes in ambient temperature. Stability is achieved with a digitally derived sine-wave oscillator, having a crystal clock as the frequency reference. |
|
Laser Hologage LGH (resolution 0.01 um):
- High-accuracy type with high displacement accuracy (0.1 um), high repeatability (0.02 um), and a length measuring range of 10 mm
- Optimal as a master gage of measuring instruments.
- For detailed information, leaflet is available on request.
Linear Gage LGB2 (slim type, resolution 0.1 um):
- Optimal for incorporation in equipment owing to a slim head type.
- Resolution: 0.1 um, accuracy: 0.8 um, measuring range: 5 mm
- For detailed information, leaflet is available on request.
Linear Gage LGF (resolution 0.1 um):
- A new model with a resolution of 0.1 um added to the lineup in the LGF series.
- A drastic cost reduction has achieved compared with the conventional type. Measuring range: 10 mm, 25 mm depending on the type
- For detailed information, leaflet is available on request. |
|
LASERSPEED 4000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
LaserSpeed is able to measure length & speed on continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0.4 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs:analog, RS232, 2x pulses as standard
Benefits:
1- non-contact Laser Doppler technology ensures high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
2- no moving parts: no wear or drift to the accuracy
3- independent to product size and no markings |
|
LASERSPEED 9000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
A Bragg cell is built in the optical system to allow for measurement of speeds from 0m/min, et to detect the direction of travel of the product without the need for external information.
LaserSpeed is able to measure length & speed on dis-/continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs: analog, RS232, 2x pulses as standard, Ethernet
Benefits:
1- Measures from 0m/min, ideal for applications where the speed profile is variable with frequent stops or reverse speeds,
2- high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
3- no moving parts: no wear or drift to the accuracy
4- independent to product size and no markings |
|
The RD500 is a locator for underground plastic water pipes. A transonde is used to vibrate the water as it passes through it and across an internal spring system sending a minute sound wave back along the pipe. This sound wave is then detected using the RD500 receiver hence locating the water pipe.
Key features:
- Simple operation - a meter deflects showing pick-up of the vibrations on the water pipe
- No disruption of services while locating
- Audible and visual tracing indicator
- Variable Power Pulsers (TransOnde) supplied
- Distances up to 800 metres may be traced
- Locate up to 2 metre depth |
|
Malvern® Insitec® systems measure particle size distributions from 0.1 to 1000 µm wet or dry, atline or online, with even mobile solutions.
The Parsum inline particle probe (IPP) delivers continuous real-time data for particles or granulates in the size range 50 - 5900 µm.
The proven laser diffraction technology at the heart of the Insitec® systems is now the standard in most particulate processing industries and has been pioneered and developed by Malvern® Instruments for more than 30 years. Insitecs rugged construction and robust technology reflect the exacting demands placed on analytical instrumentation in continuous use in a process environment. The instrument, the process interface, analysis software, automation and data reporting can all be customized to the unique needs of individual clients. The sensor's range of changeable lenses allows the tuning of instrument resolution to the needs of the process. The instrument is watertight and dustproof, and certified to industrial protection rating IP66. It is CE badged and meets industrial grade electromagnetic compatibility (EMC) requirements for safe, reliable operation.
The Parsum inline particle probe (IPP) is a rugged particle size analyzer based on the principle of spatial filter velocimetry. Installed directly into a line or unit it delivers continuous real-time data for particles or granulates in the size range 50 - 5900 µm, carried in dry streams. It is simple to use and requires neither calibration nor sample preparation. The Parsum is successfully used in industries ranging from food production to chemical manufacture to monitor processes such as granulation, agglomeration and milling.
|
|
Analytical Imaging - Morphologi® G3, Sysmex FPIA-3000, SyNIRgi
Particle shape and chemical composition image analyzers
Morphologi® G3 is an advanced particle characterization system for size and shape analysis. With a fully automated, dry sample dispersion device, and sophisticated data analysis software, it delivers reproducible, statistically significant data, with minimal manual intervention. Capturing microscope quality images of hundreds of thousands of particles in just a few minutes, Morphologi® G3 measures 20 different size and shape parameters.
Sysmex FPIA-3000 is a flow cytometry-based system using image analysis for the fully automated characterization of the shape and size of particles suspended in liquid media. Using a CCD camera and strobe illumination, it produces images of each suspended particle. With a choice of configurations, it measures particles from 0.8 - 300 µm using as little as 1 ml of sample.
The SyNIRgi near infrared chemical imaging (NIR-CI) system provides analysis of the nature and spatial location of chemical components within a sample. It combines the species identification capabilities of conventional near IR spectroscopy with digital imaging and is ideal for non-destructive routine analysis of samples with spatially complex arrangements of chemical species. Chemical imaging's application to solid dosage forms, allows determination of content uniformity, blending efficiency, polymorph distribution, moisture content, contaminant location, non-destructive coating thickness, and high-speed counterfeit detection.
Select Morphologi G3, Sysmex FPIA-3000 or SyNIRgi from the link. |
|
The new CAMSIZER generation is a compact laboratory instrument for simultaneous measurement of particle size distribution and particle shape. Using the measuring principle of digital image processing, two specially rated digital cameras measure pourable solids in the range from 30 µm to 30 mm. The unique scanning of all particles with the new advanced software means that for the first time it is possible to obtain screening results directly without any additional adaptation procedures. This makes CAMSIZER the ideal time- and cost-saving alternative for incoming and outgoing controls and for in-process quality control.
The AutoSampler - option for the CAMSIZER allows a high sample throughput in automatic operation mode.
Product Advantages:
- NEW: improved comparability to sieve analysis , also for multimodal distributions
- NEW: optimized, intuitive software
- NEW: additional shape parameters (e.g. surface analysis)
- NEW: several language versions (German, English and other languages)
- Results are saved in more than 1,000 size classes
- Simultaneous analysis of particle size, shape, number and density
- Greatest possible accuracy and reproducibility
- No-contact, non-destructive measurement
- Very short measuring time (2-3 min.)
|
|
JAQUET has a long tradition of being the leading supplier of overspeed protection systems and instruments. In fact JAQUET invent-ed the hand held tachometer and pioneered the first digital tacho-meter and overspeed protection systems for turbines.
Real-time speed measurement is essential to continuous moni-toring. In emergency situations the less than 10 ms reaction time provides a fast shutdown before damage can occur. Where the protection of your valuable investment is concerned compromise is out.
Today JAQUET provides an extensive range of products for overspeed protection and speed measurement. Availability and Safety are the key words describing our overspeed protection solutions. Every shutdown costs money - but safety comes first. Whether they be single channel or in complex 2 out of 3 voting logic, we promise you fastest reaction time, maximum security and optimum availability. Let JAQUET's expert application knowledge, long experience and top product quality protect your investmen |
|
Icount PD
A new generation of detectors of particles on which industry can "count"
Technical description:
Technology of luminous screening per laser diode recognized by industry
Approved calibration, methods on line
Indicators LED for levels detected ISO & NAS
Technology entirely PC compatible /PLC
Simple connection by catches of M16 test or with an interface by sensors STI on line.
Advantages:
The most modern technology in the field of the analysis of the contamination by solid particles
Trace program of preventive maintenance
Analyzes on site combined with the laser technology
Simple communication protocols for the configuration of use and exploitation
Ecological nylon material reinforced with glass fiber
Accreditation IP66
Economic solution.
Applications:
Mobile sylviculture
Industrial facilities, paper Paper & pulp - Steel-works - energy Conversion
Transformation of alternative energy - Systems of transmission for wind mills
Installations of military support on the ground - testing grounds & quality control.
|
|
|
Other measuring instruments
