|
|
| Products 181 to 210 of 288 |
Economical introduction into the world of tensiometry with the LAUDA Ring/plate tensiometer TD 1 C.
The TD 1 C units, whose technology has been completely revised and which bear a new design, offer even easier handling due to the handy remote control Command which has proven itself with LAUDA thermostats and measuring instruments. State-of-the-art processor technology allows extended documentation options. The sample stage of the easy to handle tensiometer can be manual adjusted. So the TD 1 C is a very flexible and highly precise measuring instrument.
Advantages:
- Easy to operate
- Transmits a direct feel for surface and interfacial tension
- Specially suited for beginners and in educational settings
- Digital display of surface and interfacial tension
- Simple selection of measuring methods according to
Du Noüy-ring, Wilhelmy-plate, Lenard frame or density
measurement
- Calibration with standard weights
Application Examples
- professional training at the university’s practical training in physics: the robust and intuitive TD 1 C allows students to mesure exactly – and without additional corrections - the static surface and interfacial tension of numerous liquids according to the standardized methods of Du Noüy and Wilhelmy.
- determining the density according to the Archimedes‘ principle of liquid media
- Testing of cleaning water for detergent residues
- Determination and testing of the physical characteristics
of solutions
- Development and testing of surface-active substances such as
surfactants and emulsifiers
- Detection of surface-active substances in wastewater
and other water |
|
hese belt grinding attachements can be mounted to any lathe or stone grinding machine. They are easy to operate and reliable in operation
• zum Anbau an eine Drehbank
• einsetzbar mit Schleifbändern oder Polierscheiben
• Bürsten, polieren und satinieren
• Für alle Drehbänke
• Pendelschleifaggregat
• Pneumatischer Anpressdruck
Technische Daten:
Applications:
Surface improvements prior to plating, descaling, deburring, superfinishing, finishing for surface checking by ultrasonic, removing surface defects, decorative grinding and polishing, microfinish surface, satin finishing, chrome finishing, improving corrosion resistance, removing of coatings ...
Workpiece and parts:
Tubes, bars, pipe, profiles for furniture industry, decorative stainless, shop interior, engine components, axles, precision engine parts, paper tubes, fiber and kevlar tubes, golf shafts, stainless tube, heat element, door handle, peeled bar, hydraulic cylinder rod, telescopic cylinders, chrome bar, steel bar, boiler tube, rods ... |
|
| Acquire and transmit Resistance Temperature Detector (RTD) thermal data from transformers, motors, generators, or other system apparatus with best-in-class electrical rejection provided by the SEL-2600A. Connect any one of the following four different RTD types on each independent input: 100 Ohn Platinum, 100 Ohm Nickel, 120 Ohm Nickel, and 10 Ohm Copper. |
|
| Reduce capital and operating costs by time sharing on-line analyzers. Sample Sequencer™ is capable of operating with either continuous or batch-type analyzers. A Manifold Sampling Valve is also available for stream switching with the Sample Sequencer™. share up to 8 analyzers. CE approved. |
|
Large Aperture Scintillometers consist of a transmitter and receiver for measuring atmospheric turbulence over distances from 250 m to 8 km. ET Systems deliver surface heat flux and evapo- tranpiration data from a complete, easy to use, package.
|
|
Micromeritics’ new generation SediGraph III 5120 particle size analyzer combines the proven SediGraph analytical technique with advanced instrumentation features to provide superior repeatability, accuracy, and reproducibility in the size range of 300 mm to 0.1mm. In addition, complete particle accountability assures that all of the introduced sample is accounted for. The SediGraph III measures mass by X-ray absorption and particle size by sedimentation– no modeling is required.
The SediGraph III promises the same dependable results as its predecessor, but with greater ease-of-use and reporting power. Computer-controlled mixing chamber temperature improves repeatability and reproducibility. A highly versatile and interactive reporting system provides a wide range of custom data presentation options and now includes grain size in Phi units and particle settling velocity. Statistical Process Control (SPC) reporting and regression analyses are also available. SediGraph II 5100 files can be utilized by the SediGraph III, allowing a seamless transition to the new system.
The SediGraph III is fully automatic. Combined with the optional MasterTech 052 Autosampler, up to 18 samples can be queued to run sequentially and completely unattended, including automatic stirring or sonication prior to transfer to the analysis system. |
|
Accepting the signal from our speed sensors and from a variety of transmitters with a pulse or AC-output. The unit provides alternative input paths for high level and low amplitude. Performance data easy programmed locally at the unit by incorporated keys.
Incorporated 2 speed alarms with SPDT relay contacts. Response characteristics individually programmable: setpoints, response characteristics and starting conditions.
Optional one 20 ma analog output with programmable span.
Signal frequency range 0 – 100 kHz.
Supply from 18-40 v or 85-265 v AC or DC.
Main design for snap-on-track, optionally in IP65 outdoor or ATEX Ex-proof enclosure.
|
|
Although modern machines are controlled centrally, complex installations often benefit from local fine-tuning and a display for operators to determine the machine status. JAQUET tachometers and speed switches are used in a wide variety of applications. Our extensive product line provides optimum solutions for both information and control.
Whether it's a digital tachometer, an analog indicator, a converter or a switch, you can rely on JAQUET for the right speed sensing equipment. |
|
Fast response to the variable, with display, analog output, contact alarms, and data interface. 2 incorporated measuring channels, to compute their ratio, difference, percentage difference (draw and shrinkage in paper and textiles), monitoring speed synchronism. Programmable adaptation to the application data, of the analog span, and of the alarms performance. Optional data bus o RS 232 or PROFIBUS. Design optional for snap-on-track, or panel mount, or 19 inch rack.
Specific versions are available to handle speed and direction output from our corresponding sensors, actuating relays with programmable response characteristics.
|
|
Speed Monitoring Systems with Enhanced Safety, for turbines, pumps, motors, as typically found in power plants.
A system intended to protect persons and assets against overspeed danger must be equipped accordingly. This concerns its parts, but also the redundancy of its structure. We offer different gradations to regard the individual requirements of the application.
All our E16 systems have 3-channel redundancy with safety relays and fast response < 15 millisec. Optional are incorporated 2oo3 voter, automatic and independent self-test routine, PROFIBUS data interface, additional alarms, analog outputs, monitoring of motion reverse, acceleration, and turngear comparison.
Design as 19-inch rack or surface mount.
|
|
Rotas programmable rotational speed monitor
The Rheintacho rotas programmable rotary speed monitor is a pulse value system – its primary application is to monitor rotary speed and velocity based on period duration measurement. If the upper or lower thresholds are exceeded, it actuates relay outputs according to the set commands. There is also a version with a scalable current output for analog measured values.
The rotas rotational speed monitor not only stands out because of its wide range of freely programmable functions and fast, flexible signal processing; it is also very easy to use, is simply and compactly designed, and has only six controls.
The integrated LC display clearly shows measurement and status values, as well as dialogs for programming.
The rotas rotational speed monitor has a huge variety of applications. It monitors combustion engines in power plants and ships, as well as in gas, water and wind turbines, and can also be used for process monitoring in paper, foil or textile production. Drive units of machine tools and processing centers can also be excellently monitored with the rotas rotational speed monitor.
The rotas rotational speed monitor takes on an important role in complex systems. Working independently, it takes the load off the higher level control system. If problems occur, it triggers an alarm function via its relay outputs. In shipping applications, the rotas acts as a secondary safety circuit to shut down the engines in emergencies. The rotas is approved as an emergency stop system by Germanischer Lloyd (GL). |
|
Good news for the measurement of extremely low interfacial tensions:
with the SITE100 the user now has a spinning drop tensiometer with automatic image analysis available.
The SITE100 continues the long tradition of KRÜSS spinning drop measurements with the most up-to-date technology. It combines the time-proven and absolutely reliable mechanisms of the preceding instrument generations with the vast experience in video-supported image analysis at KRÜSS.
|
|
| The FlowSorb III is an entry-level single-point and multipoint BET surface area instrument. The FlowSorb measures surface area using the flowing gas method, which involves the continuous flow of an adsorptive and inert gas mixture over the sample at atmospheric pressure. It is ruggedly constructed and ideal for demanding analytical environments. |
|
Micromeritics introduces the TriStar II 3020, a fully automated, three-station surface area and porosity analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements. The three analysis ports operate simultaneously and independently of one another. For additional throughput, four TriStars can be operated with one computer. The speed and accuracy of the Tristar II make it an ideal instrument for a wide variety of applications that include pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, fuel cells, high-tech ceramics, and much more.
The new TriStar II features a dedicated Po port, allowing the measurement of saturation pressure on a continuous basis. A 2.75-liter Dewar and extended length sample tubes allow complete adsorption and desorption isotherms to be collected without operator intervention. The TriStar II can collect up to 1000 data points. Fine details of the isotherm can be observed and recorded providing high resolution and revealing pore structure details. The instrument also features a krypton option, allowing precise measurements in the very low surface area range.
The TriStar II also combines versatility in analysis methods, data reduction, and reporting to allow the user to optimize analyses to specific applications. Reports include adsorption and desorption isotherms, BET surface area, mesopore pore size and area distributions, Statistical Process Control (SPC), new isotherm and thickness models, isosteric heat of adsorption, and integrated DFT models. |
|
TAPlus Texture Analyser
Texture Analyser 102 kgf (1 kN, 225 lbf)
The system is capable of storing up to 600 test results from a choice of 10 programmable test set-ups. For enhanced performance, the TAPlus can be used with Lloyd Instruments NEXYGENPlus data analysis software . The software contains an extensive library of pre-programmed texture test set-ups based on international standards. Test information can easily be exported to Microsoft® products such as Word, Excel® and Outlook®.
The machine can be fitted with a wide range of specially engineered food texture fixtures and probes as well as multi-purpose grips for general applications such as packaging testing.
Key Features
Simple to set up, operate and maintain
Load measuring system exceeds the requirements of all recognised international standards
Large working area - 175 mm (6.9 in) throat for large specimens
Crosshead travel 500 mm (19.69 in)
Speed range 0.05 - 1270 mm/min (0.002 to 50 in/min)
Flexible work surface configurations
Base table, stainless steel drip tray and 12 mm (1/2 in) cylinder probe supplied as standard
Load rate control
Data sampling rate 8 kHz
High resolution backlit LCD display with intuitive operator interface
Multi-lingual and multi-unit display options as standard
Flash memory upgradeable
Full PC integration with ISO TickIT accredited NEXYGENPlus data analysis software.
|
|
New Powerful CT3 Texture Analyzer Features Both Compression and Tension!
Brookfield Engineering introduces the New CT3 Texture Analyzer, the most powerful, lowest cost, stand-alone Texture Analyzer ever produced. This new generation instrument features not only the traditional Compression Mode, but now includes a brand new Tension Mode. Now manufacturers can test their products and the packaging as well. The large vertical work area of the CT3 is ideal for large sample placement. This also allows for increased travel distance maximizing the functionality of the new Tension Mode.
The CT3 offers load cells in 100g, 1,000g, 1,500g, 4,500g and 10kg. The 10kg load limit more than doubles the limit of it’s predecessor, the LFRA Texture Analyzer. It also features a broader speed range for probe movement, a USB port for direct connection to a PC, and an optional temperature probe.
The CT3 Texture Analyzer features seven test modes. These Report Test Modes include: Normal Test, Hold Time Test, Cycle Count Test, Bloom Test, TPA Test, Tension Test and Static Load Calibrator Check.
Brookfield provides a complete line of fixtures for use with the CT3. In addition, Brookfield will work with customers to develop custom equipment for their specific texture measurement applications. |
|
| Complete representation of a real low voltage installation in industrial and residential areas. The board includes all typical elements found in real systems: sockets, electrical loads, lightning and earthing systems for TT, TN and IT types of installations. |
|
In some critical bolting applications, factors such as friction or bolt/joint geometry are such that the measurement of applied torque alone will not provide the degree of accuracy necessary to control the preload within the required limits. Likewise, many critical applications also demand that bolt preload be monitored over the service life of the fastener as part of a predictive or preventative maintenance program. In these applications, ultrasonic measurement of fastener elongation and/or load has frequently proven to be the most accurate, reliable and cost effective solution.
Ultrasonic measurement of bolt preload is made possible by introducing a sonic pulse at one end of the fastener and accurately measuring the time of flight (TOF) required for the echo to return from the opposite end; using material constants, the USM-II converts this TOF into an "ultrasonic length" of the fastener, providing a baseline from which future measurements will be made. When the fastener is tightened, the TOF increases and the USM-II will again utilize material constants to eliminate the effects of stress and temperature variations on sound velocity, providing an accurate elongation or load measurement.
The USM-II uses state of the art hardware and software to achieve these measurements with maximum automation, and minimizes the need for operator interpretation. Offering digital recordation and transmission of data, as well as calibrated analog signal output the USM-II provides a complete system for measurement, recordation, and control of fastener tension in the most demanding applications. |
|
DIGICAT 100 Buried Service Locator
The DIGICAT 100 can be used to find live (energised) power cables, trace buried metal services which reradiate signals. The highly visible digital LED display makes a swift service location possible.
DIGICAT 200 Buried Service Locator
In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. ± 10%.
DIGICAT 200 GIS Buried Service Locator
The DIGICAT200 GIS offers all the functions of the DIGICAT 200 with additional wireless connectivity. Compatible with a wide range of field proven hardware platforms and combined with simple interfacing with a variety of industry standard GIS software.
The DIGICAT 200 GIS is an ideal solution for systems integrators seeking to integrate buried service locating with GIS and survey mapping processes, using industry standard wireless connectivity. The advanced data output format provides system integrators with the opportunity to further develop innovative data capture and operational management solutions to meet new market opportunities. |
|
| The spectral responses of every UV Radiometer are carefully adapted to the respective measurement application. Precision manufacturing and individual spectroradiometric calibrations ensure a high degree of reproducibility and comparability from unit to unit. The calibrations are linked to other calibration references through Kipp & Zonen's international cooperation in projects to establish UV radiation standards |
|
| Moving up in the heavyweight class, Seraphin® produces heavy duty provers for testing tank trucks, containers, testing tanks and large volume meters. These are all made with the same accuracy and attention to detail and quality as the smaller test measures. A prover has a bottom drain and a graduated neck . Seraphin® provers are easy to use, reliable, and low cost way to measure the output accuracy of liquid metering equipment. All Seraphin® provers are manufactured of type 300 Stainless Steel eliminating the interior coating required of carbon steel models and therefore are corrosion resistant over an indefinite period of time. Many Seraphins® are still in use after decades of use. They are built and calibrated to the latest OIML R-120, Measurement Canada, API and NIST handbook 105-3 standards. Seraphin's® provers are used world wide and are considered the de-facto leader in the industry. |
|
The new Meteo - Multisensor type FMA 510 was made for measurement of air temperature, relative humidity, barometric pressure, wind speed, wind direction, rainfall, duration of rainfall and rain intensity. The sensor is easy adaptable to all ALMEMO dataloggers from AHLBORN. Due to its low power consumtion the sensor is suitable for stationary as well as for mobile weather stations.
|
|
The Vaisala Weather Transmitter WXT510 offers a full set of sensors in one instrument, enabling you to easily set up a weather station. It measures wind speed and direction, liquid precipitation, barometric pressure, temperature and relative humidity — all in one instrument.
The WXT510 is compact, durable, simple to install and easy to integrate. As the instrument has no moving parts, it requires little to no maintenance. The WXT510 provides unparalleled flexibility due to its various options - opening new possibilities for weather measurement.
The wind measurement is based on the advanced ultrasonic Vaisala WINDCAP® Sensor. It measures both horizontal wind speed and direction using a Vaisala patented array of three equally spaced ultrasonic sensors. This design ensures accurate wind measurement from all wind directions without blind angles or corrupted readings.
The precipitation measurement in the WXT510 is based on the new Vaisala RAINCAP® Sensor. Compared to traditional precipitation gauges, the sensor gives more detailed information about precipitation.
The WXT510 measures accumulated rain fall, rain intensity and duration — all in real time. The Vaisala RAINCAP® Sensor is the only maintenance-free precipitation sensor on the market.
|
|
Sensus data logger
Tripod
Internal lead-acid battery
Solar panel
Aerial sensor array
Sensors: Air temperature, Humidity, Wind speed, Rainfall, Solar radiation
Wind direction
Barometric pressure
Anchoring kit, with tools and compass
Customised carrying cases
Online Pro PC software |
|
Meteo station HM30
For pressure, humidity, temperature and altitude
Compact and easy to operate
Multi-function measuring instrument for climatic data for on site use at any time
RS232 interface
Datalogging with real time clock
Data transfer to PC
Windows supported software |
|
X-Ray Fluorescence Gauges are used to measure coatings containing quantities of metal or heavy elements, on plastic or paper substrates. The sensor energy level is selected for the application, such that the photons striking the material cause it to fluoresce. The returned fluorescence energy provides the information necessary to precisely calculate the coatweight. This selective technique has significant advantages in simplicity of operation, accuracy, and reduced equipment costs.
|
|
| ... products without technical information |
| |
|
|
Other measuring instruments
