|
|
Designed for simple measuring applications up to 16 sensors/measurements and basic statistic analysis, Merlin represents a new concept of gage computer using the same technologies created for PDA and portable electronics, for data collection from traditional or wireless measuring devices.
Embedded technology allows: small dimensions (the whole system footprint is smaller than an A4 sheet of paper), fanless architecture and no moving parts (flash disk storage media), assuring the highest level of system reliability.
Merlin gage software based on Microsoft® Windows® CE 5.0 guarantees a friendly and easy to use operator interface. Its touch-screen designed human interface allows to program and acquire measures without any additional input/command device. |
|
The Wireless Probe System provides an excellent means to measure Temperature, EMC or MC values at hard to get to or remote locations.
It has been used in numerous research projects to measure MC inside walls , inside lumber stacks or other materials. Also it is used to just monitor MC, EMC and/or Temperature readings in predominantly smaller Kilns.
Up to 100 remote Transmitters (T,EMC,MC) can be connected. The signals are picked up by one or several receiver(s) connected to a PC. There, all readings are being numerically or graphically displayed. MC readings are corrected for individual species.
The transmitters operating range varies from approximately 75' inside a kiln to 1000' where a straight line of sight exists. They are powered by an integrated lithium battery lasting the entire life span of the unit (appr. 10 years |
|
The TITAN gas analysis system that represents a "total solution" to your next project could include:
- A modular industrial spectrometer designed for versatile external sample interfacing
- A selection of optimized gas cells
- Powerful AutoQuant Pro software
- High quality spectral reference libraries
- Assistance with method development, (including EPA and SEMATEC protocols) |
|
The 2665 Series high resolution digital automatic extensometer provides a solution to the need for faster and more efficient testing. All operations of the extensometer are fully automated.
The extensometer is available for axial and transverse measurement (2665-026).
Principle of Operation
The 2665 Series extensometer uses a servo-follower to measure the test specimen strain without any significant operating (drag) forces.In operation a pair of motorized arms positioned and remotely controlled, gauge length are closed on the test specimen.
The arms are fitted with sensitive strain gauges which are used to control the servo follower system.
The strain measurement transducer is a high accuracy digital scale and the moving parts of the extensometer run on low friction precision air-bearings.
The extensometer arms incorporate over-travel protection to prevent damage.
All operations of the extensometer are fully automated and can be controlled directly from software (via a GPIB interface) or via a handset. The available functions include setting of: axial gauge length, lower arm position, gripping force.
A self-test routine and service diagnostics assure minimum downtime in the event of a failure. |
|
Extension measurement is one of Zwick Roell´s core areas of competency. The result is a comprehensive range of high class equipment. The product palette is arranged as follows:
Non-contact extensometers with and without measurement marks.
Contact extensometers: Sensor arm extensometers, incremental and analogue clip-on extensometers as well as extensometers for compression and flexure tests.
Advantages of Zwick Roell Extensometers at a Glance
Innovation: Strain measurement is a key technology in the range of test engineering. Zwick is leading in this technology - in the application to extreme damageable materials as well as to tough specimen. The Zwick Roell product program contains extensometers that nobody else can offer.
Selection: Zwick offers a comprehensive selection of extensometers. You get a suitable system for tests on high-extension specimen like elastomers as well as for tests on brittle materials as ceramics. The choice ranges from analogue clip-on extensometers to fully automated universal extensometers.
The operator at the forefront: Zwick Roell extensometers are designed with the operator in mind. They should be as simple as possible to clamp on the specimen and to operate. Automated test sequences from clamping sensor arms to unclamping them after specimen break are available to provide high level performance.
Quality: With the acquisition of an extensometer from Zwick Roell you’ll receive the best quality, this means that the accuracy and high availability of the systems is in the forefront when processing materials of the highest quality.
|
|
The Video Gauge is a non-contact, video based instrument. It measures 2D displacement and strain on materials, components and structures.
The Video Gauge is frequently used to overcome challenging measurement problems such as high temperature or high-speed material testing.
For straightforward tasks such as batch testing of material properties it offers significant time and cost savings over traditional methods. |
|
Model 3590 Digital Electronic Calibrator
Epsilon's calibrator features 50 microinches (0.001 mm) resolution and has full 2 inches (50 mm) of measuring range.The autozero button and digital display greatly simplify calibration of extensometers. It is also available in an ultra-high resolution version with 5 microinch (0.1 micron or 0.0001 mm) resolution. |
|
The forces which arise in industrial processes such a press-fit, punching or crimping often have implications for the quality of the final connection. Such forces can also be measured indirectly in terms of the strain occurring at the surface of the machine structure. This is often simpler than taking a direct force measurement, which requires the sensor to be built into the structure.
Kistler's new Type 9234A… strain transmitter with integral amplifier is fitted to the machine very simply by means of a single M6 screw. Thanks to its high sensitivity, accurate measurements are possible even with extremely rigid machine structures.
The robust transmitter is particularly suitable for use with presses and assembly line robots.
|
|
EPSIMETAL, SCAIME’s miniature strain sensor is available either with a high level output signal or with a direct strain gage output. Thanks to a patented mechanical device, installation and removing are made very easy, by means of screws or gluing, and the strain measurement is possible, from very low stresses up to 1000µm/m.
The amplified output version allows, by means of digital adjustment:
- Temperature compensation.
- Adjustable measurement range.
A watertight version is also available.
This is a perfect tool for load and force measurement or monitoring on existing structures and machines.
EPSIMETAL, used with EPSITRAC, offers a specially designed solution for the monitoring of molding machines and presses. It allows the measurement of tie bar stresses on die casting or plastic molding machines, or hydraulic presses. Periodic adjustment, as well as monitoring, is possible, with transportable or permanent installation. |
|
Model 3542RA Averaging Axial Extensometers
Designed for compressive strength tests on rock, concrete and other large compression samples, the 3542RA measures axial strain on opposite sides of the test specimen, and the output is an average of the two readings. Gage lengths from 1 to 8 inches (25 to 200 mm) and measuring ranges from .050 to .250 inches (1.2 to 6 mm) are available. |
|
On the basis of its well-proven concept of production line QC Testers, ATEQ has now developed a new Leak Tester, designed for specific requirements of high volume production of plastic parts. This instrument is used for the detection of localised moulding faults, insufficient membrane thickness, perforations, etc… The IONIQ is based on discharge current measurement and is able to detect defects in the region of 10 microns.
|
|
Compact Orifice Oriflow
Applications
The Oriflow compact orifice is used for flow measurements of conductive and non-conductive fluids, gases and vapours in all industrial branches. Applications include flow measurements (volume/mass) for balancing (compressed air systems, heat carries, vapours, chemical products, for example), process control and high throughput applications.
Reliability
already over 2,000 units in operation
extremely rugged and stable measuring instrument
suited for extreme applications
Special features
dry calibration is possible
highly reproducible results
easy to install without differential pressure lines
Flexibility
DN 15 to DN1000
0,4 bis 20000 m 3 /h
-40 °C to +400 °C (depending on model)
to PN 40 (higher upon request)
current output with HART®
electronical local display |
|
LAND has a range of dust, smoke and particulates monitors which are the most advanced available, using patented measurement technology to give high accuracy.
The analysers (which comprise a transmitter and a reflector) are mounted across the stack, the optical measurement technique uses no moving parts, giving the highest possible reliability with very low maintenance. |
|
In many instances, measuring key components during the manufacture of food products can prevent the loss of batches due to misformulation. Traditional methods, such as HPLC and GC, require high maintenance, expert operators, and long analysis times, making them impractical for process monitoring.
The YSI 2700 SELECTTM can meet your needs for real-time, accurate analysis of key food components during manufacturing. You can use the analyzer to measure common food ingredients, such as:
- Glucose (Dextrose)
- Sucrose
- Lactose
- L-Lactate
- Galactose
- L-Glutamate
- Choline
- L-Glutamine
- Ethanol
- Hydrogen Peroxide
- Starch
When placed in a manufacturing facility, the 2700 SELECT allows immediate verification of formulation for intervention and reformulation, if necessary.
Because the instrument is simple to use, extensive operator training is not required, allowing a number of people to operate it with confidence. Quality checks throughout its operation guarantee reproducible, accurate results.
|
|
BPA 5
Ready-to-Go-Set to determine the temperature at which a bitumen tends to break rather than to flow when stressed.
The Fraass-Breaking-Point is the temperature at which the first cracks appear in the coating.
It can be applied for any homogeneous road or industrial bitumen. |
|
Fully automatic yet simple and precise - the entry level into surface and interfacial tension with the LAUDA Ring/plate tensiometer TD 2
The LAUDA Tensiometer TD 2 is used to measure surface and interfacial tension, to determine the density of liquids and to measure small weights. The fully-automatic and cost-effective instrument consists of a precise electromagnetic weighing cell plus a remote control panel with a userfriendly graphic LCDscreen for precise measurements.
Advantages:
- Easy to operate
- Transmits a direct feel for surface and interfacial tension
- Specially suited for beginners and in educational settings
- Digital display of surface and interfacial tension
- Results can be displayed, printed, saved or transferred to a PC
- Precise electromagnetic weighing cell
- Simple selection of measuring methods according to
Du Noüy-ring, Wilhelmy-plate,
Lenard frame or density measurement
- Calibration with standard weights
Application Examples:
- Testing of cleaning water for detergent residues
- Determination and testing of the physical characteristics
of solutions
- Development and testing of surface-active substances such as
surfactants and emulsifiers
- Detection of surface-active substances in wastewater
and other water |
|
The Triathler gamma counter is a compact, portable, manual instrument for counting gamma labels in the 10 keV .. 500 keV energy range.
Key characteristics:
- 32 x 32 mm NaI detector, through hole, well diameter 14 mm. Background shield 8 mm of lead
- 1000 channel Multi Channel Analyser
- Max sample diameter 13 mm.
- > 75 % counting efficiency for I-125
- Optimised to count e.g. radio-immunoassay and cytotoxicity
- Single or dual label counting with spillover correction.
- 32 character alphanumerical display
- RS-232 port to drive a PC or a printer
- Preset nuclides:I-125, I-129, Co-57, Cr-51, Cs-137, Co-58
- Software for MS WindowsR to download the results to a file or MS Excel worksheet is included
- Remote control of the Triathler via the RS-232 port
- Power input: 12V DC, 1.5 A or 100 .. 240 V AC, 50/60Hz
- Mechanical data: H 190 mm, D 330 mm, W 250 mm, weight 9 kg
Delivered with:
- Owner’s Handbook
- PC interface software
- RS-232- cable
Available options:
- Additional internal lead shield, thickness app. 6 mm, weight 6.5 kg
- Equipment and field cases |
|
| The RSU (Reformate Supply Unit) is a gas mixing station that can prepare a hydrogen rich stream suitable to feed into fuel cells of different types, such as Pem, high temperature PEM, SOFC, etc. It can also be used to test other fuel cell related components such as shift and prox reactors. |
|
KOFLOC MFC-Gas Mixer (8500)
The KOFLOC MFC-Gas Mixer (8500) integrates 3 KOFLOC Gas Mass Flow Controller MODEL 8500 SERIES and a gas mixer in one convenient package. The result is a compact device that not only saves space and avoids clattering, but a unit with superior performance than a conventional system of separate mass flow controllers, a gas mixer and piping. The KOFLOC MFC-Gas Mixer (8500) is especially suited for burn control applications by greatly reducing flame flickering and stabilizing burn better than conventional setup.
FEATURES
- High-lift actuator for large flows
- Single 24 VDC power source
- Choice of RS232C or RS485 interface
- Standard totalizer function
- 14-bit converter for 4-1/2-digit display and operation
- Isolated thermal sensor for measuring inflammable gases
- Choice of SUS316L or SUS316 stainless steel
- Standard dimensions and fittings for easy replacement
- Free mounting position
- SV setting, plus 5 pattern settings
- Auto-zero function
- Wide selection of fittings, seals, wetted materials and communication interfaces
- Easy maintenance
APPLICATIONS
♦ Gas mixing
♦ Burn control |
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
B&B Thermo-Technik is specialized in the production of gas analysis probes. Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Transmitters |
|
| The Clif Mock sample probe was the first truly isokinetic sampler available for crude oil sampling and is still the most accurate and reliable method for extracting a sample from a pipeline for BS & W analysis. Designed to be used with C-22 Isokinetic Samplers, the CD20 drive units are available in four configurations and are capable of pulse counting, timing, pacing from computer and sending out a "loss-of-signal" alarm. In the last few years, there has been increasing demand for much more elaborate systems. These CLIF MOCK True Cut™ systems commonly have multiple receptacles for separate products or batching operations and have controllers, which interface with central computer systems. |
|
A cost effective, handheld, single-axis magnetic field meter that provides the user with a quick, reliable and easy way to measure electromagnetic field (EMF) radiation levels generated by power lines, cables, computer monitors, TV sets, Video equipment and many other similar devices. Can be switched between gauss and Tesla readings.
Purchase price is $119.95 plus shipping. Combine with our Lab Kit, LK120, to create a complete set of investigative and problem-solving tools for issues dealing with electromagnetic fields. Customers in Germany and Austria, or The Netherlands, Belgium, Luxembourg are to be placed directly with the distributors in Germany and The Netherlands respectively. |
|
7000 Series Gaussmeter:
- Bright 1/4-VGA readout
- Fully menu-driven for easy operation
- Large electroluminescent graphic display
- Auto Zero and Auto Calibration
- Over 100 standard probes available
6000 Series Gaussmeter:
- Large Format LCD
- Dual 33/4 digit readouts
- Temperature measurement
- Displays in Gauss, Tesla or Ampere/Meters
- Peak Hold
5100 Series Gaussmeter:
- The Best Accuracy in its class
- The only handheld instrument utilizing DSP (DigitalSignal Processing)
- Probe Included
- Auto Zero
- Min/Max Hold
4100 Series ELF Meter:
- Low Cost, Small, Lightweight, and Portable
- High Accuracy
- Gauss or Tesla Display Units
- 0.1 mG /.01µT resolution
- Low Battery Detection |
|
Level foundations improve machine availability. LEVALIGN® is tailor-made for precision measurement of machine foundations, bed plates, flanges and machine half casings. The system and its powerful PC software LEVALIGN® Editor features:
- Straightness and flatness measurement
- InfinispliceTM to measure infinite number of points and surface area
- Linking separately measured surfaces
- Measured surface profiles shown in 2-D and 3-D graphics |
|
Free falling powder and bulk products
Pipe Ø 100-600 mm / 4-24 inch
or Pipe Ø 100-300 mm / 4-12 inch
Typically, the GF types are used in gravity feed pipes and provide highest performance in detecting magnetic and non-magnetic metals. The bulk material falls through the metal detector. With the reject flap EX-S smallest metal objects are separated out of the product stream promptly.
With a maintenance free design and high quality construction, for reliable operation in the most challenging industrial environments. |
|
HDT/VicatPlus Tester
The Davenport HDT/VICATPlus is designed to determine the temperature of deflection of thermoplastic samples in accordance with both national and international standards.
The unit consists of a temperature controlled oil bath, with up to six testing stations, each of which may be configured for either HDT or VICAT test methods. The weight loading mechanism and test fixture mountings are designed as a single unit, which is lowered and raised in to the oil bath by electric motor under software control. The design of this assembly includes extensive safety features. The bath is closed off in the lower and upper positions, the oil surface only being exposed when the assembly is in motion. A nitrogen safety blanket is also fitted as standard. The unit functions as an independent unit, or can be PC controlled using NEXYGEN" software for the HDT/VICATPlus, Lloyd Instruments' advanced test and results analysis package.
|
|
Either in environmental related gas analysis like stack testing, continuous emission monitoring (CEM), vehicle emission testing or LEL warning indication and in process applications like combustion efficiency monitoring, boiler trim, ethylene plants or petro chemistry, sample gas needs to be extracted from the gas stream.
It is obvious, that for a reliable analysis the sample gas must be extracted free of ambient gas leaking into the system and at the same time the dew point of the sample must remain stable.
This explains why the sample gas probe is the important interface between the process and the analyser system.
Quality, reliability and low operation cost have been the main targets for the development of this programme. The results are outstanding: the modular design allows application specific combinations in a very price effective manner.
The GAS 222 series of sample probes provides "down to earth" solutions based on advanced modular designs.Depending on the application, a variaty of heated or unheated basis units can be combined with in-situ or downstream filters. The filter material can be chosen from sintered ceramic to sintered stainless steel or even pleated stainless steel. Filters with large surfaces provide long life time. For the in-situ filters a highly efficient blowback system is available at reasonable cost.
Bühler sample gas probes are the best solutions if cost effective installation and low operational cost are a concern! |
|
The gas sample probes are used for continuous extraction of gases from dust loaden, high temperature or humid processes for the gas analysis.
Unheated, heated, explosion proof and portable versions are available.
Due to its modular design the gas sample probes can be adapted to nearly all process conditions.
. |
|
| Designed for use with furnaces and induction heating systems, these extensometers use Epsilon's exclusive self-supporting design. A wide range of options cover most testing applications. |
|
|
|
Other measuring instruments
