|
|
Jenway's new range of filter fluorimeters include three models covering a broad range of applications and options.
Intelligent Filter Modules ensure that the correct filters are always used for your easily defined methods.
Simple raw fluorescence measurements can be made or calibration against one, or up to six, standards will ensure a wide operating range and accurate results in your chosen units of measurement.
Accessories include an electrically heated, temperature controlled sample holder and an automatic sipper pump for discrete or continuous sampling.
These fluorimeters will find application in many applications including water and environmental analysis, molecular biology (DNA/RNA), food and drink analysis and many more... |
|
| Alba FCS™ is a dual channel spectrometer that combines a confocal scanning microscope with fluorescence correlation spectroscopy (FCS) and is optimized for both single-photon and multi-photon excitation. Alba FCS™, Spectroscopy on Single Molecules Applications Measurement of molecular dynamics Measurement of kinetic rate constants Antibody-antigen interactions Ligand-receptor interactions Nucleic acid hybridization Molecular aggregation and polydispersity Chemical reactions |
|
The AvaSpec-2048x14 Fiber Optic Spectrometers is a back-thinned type CCD spectrometer with high quantum efficiency and high UV sensitivity. The optical design is based on the AvaBench-75 symmetrical Czerny-Turner design with a 2048x14 pixels high UV sensitive CCD image sensor. The image sensor is used as a linear array of 2048 pixels binning the vertical 14 pixels to optimize efficiency. The spectrometer has a fiber optic entrance connector (standard SMA, others possible), collimating and focusing mirror and a diffractional grating. A choice of 16 different gratings with different dispersion and blaze angles enable applications in the 200-1160nm range. The AvaSpec-2048x14 comes with a 16 bit AD converter, and USB2.0 high speed interface.
The AvaSpec- 2048x14 is especially suitable for measuring low light, fluorescence and UV- applications. Digital IO ports enable external triggering and control of shutter and pulsed light sources from the Avantes line of instruments. |
|
The NanoDrop® ND-3300 Fluorospectrometer is a multi-source optical instrument for measuring fluorescence. This space-saving fluorometer offers exclusive features that allow investigators the flexibility to use fluorometry in valuable new ways.
The uniquely clean optics of the patented retention system, combined with virtual filtering (see below) for the white LED applications, enables measurements across a wide range of wavelengths using sample volumes of 1-2 ul without cuvettes and costly filter changes.
The excitation source comes from one of the three solid-state LEDs housed in a block adjacent to the measurement pedestal (see below for more details about the LEDs). Emitted light is collected using the traditional 90° angle from the respective excitation source. A 2048-element CCD array detector, covering 400-750nm, is connected by an optical fiber to the optical measurement surface. The spectrometer is configured with a cut filter to eliminate light transmission below 395 nm. |
|
The FP-6000 series of spectrofluorometers meets the demands of both research and routine analysis by combining a highly sensitive and flexible optical system with the Windows® based Spectra Manager? software platform. The FP-6000 series is equipped with a flexible sample compartment that allows use of a range of prealigned optional sampling accessories to meet many specific application requirements.
|
|
The USB2000+ Miniature Fiber Optic Spectrometer is a unique combination of technologies a powerful 2-MHz analog-to-digital (A/D) converter, programmable electronics, a 2048-element CCD-array detector, and a high-speed USB 2.0 port. This innovative combination produces our fastest spectrometer yet and provides resolution to 0.35 nm (FWHM). The USB2000 allows users to capture and store a full spectrum into memory every millisecond (that's 1,000 full spectra every second) when the spectrometer is interfaced to a computer via a USB 2.0 port. The USB2000 is perfect for chemical, biochemical and other applications where fast reactions need to be monitored.
|
|
Shimadzu, one of the world leaders in analytical instrumentation, offers the whole line of Spectroscopy equipment as
Spectrofluorophotometers:
- RF-5300
- RF-1500
|
|
| The Turner brand name is well known for its expertise in fluorometry and spectrophotometry. Turner Quantech fluorometers provide superior new solutions for quantitative fluorescence applications, while the Turner spectrophotometer line offers user-friendly operation for classroom or QA labs. |
|
Cairn's modular photometry components make it the most versatile fluorescent measurement system available. The open design allows systems to be configured tothe user's individual needs, and to be changed or extended according to future requirements. The systems are suitable for either single, dual or multiple excitation measurements and dual emission measurements (using either single-wavelength or multiple-wavelength excitation).
- Modular system for flexibility, extensibility and ease of maintenance.
- Signal detection by analogue or photon counting modules.
- Absolute fluorescence, or fluorescence ratio measurements by analogue signal-processing modules and / or real-time software.
- Choice of fast stepping/spinning filter wheel of monochromator for multiple excitation wavelength selection.
- Standard system supports up to six excitation wavelengths with up to four photodetectors, allowing simultaneous use of two (or more) indicators.
- Connects to all popular fluorescence microscopes or incorporates our cuvette holder for cell suspension measurements.
- Optical interconnections can be made by light guides for greater convenience.
- Vibration free operation allowing simultaneous electrophysiological measurements.
- Full compatibility with imaging, cell edge tracking, and flash photolysis requirements.
- Very competitive pricing. |
|
| The FT/IR-4100 was designed to provide operational features and sensitivity levels found only in more expensive instruments. The innovative technology incorporated in these instruments results in exceptionally high signal-to-noise ratio specifications. Both models offer exceptional flexibility and can be easily upgraded to meet new requirements. Optional expandability includes microanalysis with an IR microscope, IR imaging with a multichannel microscope, and rapid scan option. The JASCO Quick Start System enables users of all experience levels to measure samples and perform data processing functions quickly and easily with a simple push of a button. |
|
Varian 670/680-IR FT-IR spectrometer
The World's Best FT -IR Spectrometers
The leader in molecular spectroscopy innovation now introduces a range of FT-IR spectrometers that provides unrivaled analytical performance under real-world conditions - the Varian 670/680-IR series.
The Varian 670-IR air-bearing FT-IR spectrometer redefines the meaning of high performance. Designed to extend performance boundaries in application areas such as polymers/materials, pharmaceuticals, biotechnology and chemicals.
The Varian 680-IR step-scan spectrometer features patented Digital Signal Processing Software (DSP1™, DSP2™ and DSP3™) which offers the research scientist additional capabilities in multiple modulation spectroscopy, ideal for research in polymers, materials, biological compounds and gases.
The Varian 670/680-IR spectrometers can be controlled by Resolutions Pro™ software. These spectrometers can also be fitted with a wide range of accessories to provide extra capabilities. |
|
| The MIDAC Illuminator is for spectroscopists who need dedicated instrumentation or custom sampling configurations. Trying to adapt a standard laboratory FTIR to these custom tasks can be like trying to fit a square peg into a round hole. Either you find yourself compromising performance, ending up with an awkward or unreliable mechanical jumble, or paying for instrument features you simply don't use. Finally, there's a solution designed specifically for your needs. The MIDAC Illuminator is a rugged, compact, and high performance FTIR module that easily and efficiently integrates with a variety of sample interfaces in virtually any configuration. |
|
Power & Versatility - Nicolet 6700 FT-IR
The Nicolet 6700 FT-IR spectrometeris the most powerful FT-IR spectrometer in the industry. It is useful as both a routine analyzer for everyday applications, and as an advanced instrument for research-grade experiments. It is easily upgradeability and features many add-on options, including microscopes, FT-Raman, and hyphenated techniques. This makes it easy to invest in a basic instrument today that can be developed into a fully loaded, well-configured system over time. |
|
Shimadzu, one of the world leaders in analytical instrumentation, offers the whole line of Spectroscopy equipment as e.g.
Infrared Spectrophotometers(IR/FTIR):
- NEW: IRAffinity-1
- FTIR-8400S
- IRPrestige-21
- IRsolution
- AIM-8800 Microscope |
|
| The Antaris NIR product line presents an industry-driven migration of NIR spectroscopy from laboratory to industry with fit-for-purpose NIR analyzers. This initiative creates a solution that migrates process analysis from the lab into production and directly measures points in product manufacturing. Antaris NIR analyzers share the same software, qualification tools, method tools, and support. All Antaris NIR Analyzers use state of the art NIR technology. |
|
Features:
- A modular industrial spectrometer designed for versatile external sample interfacing
- A selection of optimized gas cells
- Powerful AutoQuant Pro software
- High quality spectral reference libraries
- Assistance with method development, (including EPA and SEMATEC protocols) |
|
QMS 403 C Aëolos® - Quadrupole Mass Spectrometer
The QMS 403 Aëolos® quadrupole mass spectrometer is a new compact mass spectrometer with a heated capillary inlet system for routine analysis of gases and, in particular, volatile decomposition products of thermal analysis. This system has been optimized for coupling to differential scanning calorimeters, dilatometers and thermogravimetric analyzers.
The high temperature of the gas transfer system and the absence of pressure reduction orifices practically eliminate condensation of decomposition products during thermal analysis experiments. This achieves a high detection sensitivity and facilitates quantitative detection of all identified gas components.
Via the inlet system with the fused silica capillary, other gas sources can be investigated with the QMS 403 C Aëolos® independent of thermal analysis; for that purpose, the QMS is operated with the self-contained software.
The concept of the NETZSCH thermal analysis instruments has been laid out from the start for coupling with gas analysis systems like the QMS 403 C Aëolos® or an FTIR system with a gas cell, through consistent optimization of the gas paths with complete heating from the furnace to the gas detector. This eliminates gas loss through condensation at cold spots and only very low carrier gas flows are sufficient for complete transfer. |
|
| TSI offers a full line of combustion gas analyzers, from our single gas monitors to our full-featured emissions analyzers. They are used for maintaining combustion systems, compliance monitoring, engine research and monitoring, combustion research and industrial emission sampling. |
|
Oxford Instruments has launched the new robust X-ray Fluorescence (XRF) analyzer The New X-MET5000, for highly accurate and reliable elemental analysis.
Engineered for high performance and reliability, this brand new analyzer combines Oxford Instruments’ patented PentaFET® detector technology offering guaranteed fast analysis and lower detection limits for all elements of interest.
Purpose-built for the most demanding quality control applications: scrap metal recycling, analysis of metals for PMI, screening for lead in toys and consumer products for RoHS compliance testing. The X-MET5000 also serves the needs of the mining community for ore exploration, as well as the measurement of heavy metals in soils for environmental monitoring.
The X-MET5000’s major strength is the Light Element Treatment (LET) mode, enabling fast and accurate analysis of heavy elements, even when the sample contains light elements like Aluminum and Silicon. This has not previously been possible when using only fundamental parameter calibrations.
This rugged and reliable tool is IP54 (NEMA 3) approved for superior dust and splash protection. The X-MET5000 is perfect for the harshest environments. The battery’s operating time of one working day enables extended productivity.
The powerful user programmable software delivers highly accurate results for reliable Go/No-Go decisions. The X-MET5000 will identify material type and automatically choose the best analysis method.
An optional bench-top stand enables hands-free operation for multi-tasking without the loss in confidence in measurement results. |
|
Metal alloy verification is crucial to the success of many businesses, regardless of application - QA/QC, scrap sorting, PMI, failure analysis.
In late 1998, NITON LLC revolutionized the alloy analysis industry with the introduction of its XL-800 Series Alloy Analyzer - the first ever high-performance handheld x-ray fluorescence (XRF) device for alloy composition and grade verification. Since that time, NITON products have become the standard for material analysis in applications ranging from scrap metal sorting to petrochemical positive material identification (PMI), to in-house QA/QC of alloy components in manufacturing. |
|
Features:
EDX-Pocket-II is a real-time instrument for on-site detection with bluetooth technique. It is specially developed for outdoor inspection, large or portable sample' detection. It is not only good at RoHS analysis, but also full elements analysis from S to U in few minutes. It is the smallest portable XRF in the world.
Specification:
Model: EDX-Pocket-II
Detector analysis range: S to U; With Helium , the analysis range: Na to U
Applications: Full elements analysis of metal, ore or ceramics samples and RoHS detection
RoHS detection: hazardous heavy metals like Pb Hg Br Cd and Cr
Excitation source: 40kW mini W-target X-ray tube
X-ray beam diameter: 6mm
Filter: Auto switch dual filters
Measurement time: 10s-200s
Measurement range: K to U and RoHS (Pb Hg Br Cd Cr)
Detection limit: Plastic as an example Cd: 15ppm; Pb, Hg: 8ppm; Br: 8ppm; Cr: 25ppm
Correction mode: EU RoHS Plastic Standard Sample and correction data
Safety: All parameters are under good protection by the administrator mode with self-carried password.
Viscosity: The test data can be saved and transferred in computer and be printed out by bluetooth technique, massive storage card is inside of the device..
Configuration:
Amplifier
High-voltage power supply
X-ray tube
Two Sets of Lithium Batteries
Charge Supply:220V/110V, 50Hz/60Hz
Safety:
The instrument has shield cover to prevent Xray from leaking.
The X-ray tube has interlocks with the software and the tube does not work if the software is not running. |
|
The TEST-MASTER PRO is a robust, mobile spectrometer for precise analysis of metallic samples.
This decisive newly developed product is optimised for sorting demands common in depot/storage facilities of steel producing and metalworking plants. In arc-mode, measuring times of less than 2 seconds are possible allowing a complete analysis of large batches in a short time.
A high frequency power source operating in argon allows the exact analysis of nearly all metals (including cast iron) on the one hand and on the other hand, rapid sorting (including carbon determination) is completed within 4 seconds. To cool the instrument heat is transferred, without any air flow, using a heat exchanger, to dissipate heat produced during normal operation. This WAS innovation, ensures that the TEST-MASTER PRO stays operative in the most challenging of environments. (i.e. automated testing systems). |
|
| The SPECTRO iSORT performs a 'fingerprinting' procedure to independently recognize the sample material. The optimal instrument settings for the material are then automatically used for the analysis without manual operator intervention. |
|
X-MET5000 Metal recycling tool
Oxford Instruments has launced the new, robust X-Ray Fluorescence (XRF) analyzer - the X MET5000, for accurate and reliable identification of metal alloys.
This design experience combined with Oxford Instruments' patented PentaFET® detector technology guarantees fast analysis and lower detection limits for all elements of interest.
The current high prices of commodities metal, in particular Nickel, make the accurate determination of alloy composition critical in the financial success of modern recycling operations. The X-MET5000 quickly and accurately measures Nickel even in concentrations below 1%. The same instrument can be loaded with both a metals analysis program and plastic analysis program making it ideal for the growing scope of recycling industry. An analytical program for precious metals analysis is also available.
The X-MET5000's major strength is the Light Element Treatment (LET) mode, enabling fast and accurate analysis of the matrix elements even when the sample contains light elements like Aluminum and Silicon. This is not possible when using Fundamental Parameters (FP) on an analyzer that does not detect the light elements.
This rugged and reliable tool is IP54 (NEMA 3) approved for superior dust and splash protection. The X-MET5000 is perfect for the harsh conditions of a scrap yard. The battery's operating time is one working day and enables extended productivity in the yard.
An optional bench-top stand enables hands-free operation for multi-tasking without the loss in confidence in measurement results. |
|
The NITON XLt 794, manufactured by Thermo Fisher Scientific, offers a highly reliable and accurate non-destructive method for monitoring the levels of toxic metals present in plastics with little to no sample preparation. High quality analytical results can be obtained in a matter of just seconds in PE, PVC, or other polymer types. Additionally, because portable XRF is a nondestructive energy-dispersive technique, simultaneous analysis of a range of elements may be performed on a sample with just one test. Samples are left unaffected so critical parts may be effectively screened as one step in a QC testing protocol.
|
|
The Thermo Scientific NITON XL3t handheld (x-ray fluorescence) XRF analyzer combines the most powerful x-ray tubes ever used in a portable XRF instrument with advanced electronics and materials technology. The result directly benefits our users with the fastest measurement times, lowest detection limits, and the most reliable, easy to use tools for elemental analysis in the industry. From the integrated tilting color touch-screen display to the customizable menus for ease of use, the lightweight XL3t delivers heavyweight performance with a set of features engineered to improve our customers' productivity and profitability.
|
|
Advantages include:
For the first time ever, use portable XRF to identify Light Elements Si, Mg, Al and P
No Helium gas or compressed tanks to lug around
No cumbersome vacuum pumps to wear or attach
Just connect the vac-purge device for 10 seconds, disconnect and begin testing
The Smart Software automatically optimizes testing conditions
And, the internal vacuum is maintained for hours at a time |
|
The AvaSpec-3648 Fiber Optic Spectrometers is based on the AvaBench-75 symmetrical Czerny-Turner design with 3648 pixel CCD Detector Array. The spectrometer has a fiber optic entrance connector (standard SMA, others possible), collimating and focusing mirror and diffractional grating. A choice of 15 different gratings with different dispersion and blaze angles enable applications in the 200-1100nm range. The AvaSpec-3648 comes with a 14 bit AD converter, and USB2.0 high speed interface. The AvaSpec- 3648 is especially suitable for measuring high speed and high resolution applications, such as LIBS and pulsed light sources. An optional detector coating can enhance the CCD performance for the UV range and a detector collection lens offers high sensitivity.
Digital IO ports enable external triggering and control of shutter and pulsed light sources from the Avantes line of instruments.
The new AvaSpec-3648 has a USB2 interface with fast data sampling of 270 spectra per second and data transfer in 3.7 msec and supports analog in-and outputs as well. Optional BluetoothÒ (-BT) communication and an SDRAM card for on-board saving of spectra can be added. The AvaSpec-3648-USB2 runs on USB power and comes with AvaSoft-basic, a complete manual and USB interface cable.
|
|
|
|
Spectrometers, Spectrophotometers,...
