|
|
-Temperature and humidity adjustable
-Optical operating display (LED)
-High switching capacity
-Clip fixing
The electronic hygrotherm senses the ambient temperature and relative humidity in anenclosure with electric/electronic components, and turns on a heater (or alternatively, a fan) at either set point, helping prevent the formation of condensation in the enclosure.
The LED integrated in the adjustment knob on the active controller is lit when theconnected device is in operation.
Approvals: VDE + UL File No. E164102 |
|
The FB-08 is an attractively finished rectangular bench standing unit. The controls for temperature and fluidising air flow are mounted on a recessed panel on the front of the unit, together with on-off switches for the power supply and the dust extractor and indicators for various functions.
The inner container is well insulated and the outer case is vented so that it remains safe to touch even when the bath is operating at its maximum temperature. The inner container is filled from the top with alumina. When fluidised this medium is heated by four immersion heaters close to the container wall; the control thermocouple is close to the heaters. |
|
SBL- 1:
With a temperature range of up to 350°C this unit covers a wide range of uses. Simple to operate and maintenance free the SBL-1 Fluidised Bath when fitted with the optional TC-8D temperature control unit, will maintain temperature to within ±1°C. The SBL-1 has a working volume of 228mm diameter and 120mm deep. The unit is fitted as standard with an energy regulator.
SBL- 2:
For temperatures up to 600°C the SBL-2 Fluidised Bath will maintain temperature to within ±1°C when used with the TC-8D. The working volume of the unit is 228mm diameter and 140mm deep. Three 1kW heaters give a heat up time from ambient to 600°C of approximately 100 minutes. All the SBL range of units have a pocket in the fluidised bath that will accept a 5mm diameter control thermocouple.
SBL-2D:
This extra depth fluidised bath is based on the SBL-2 but with a working depth of 350mm. Four 1kW heaters give a heat up time from ambient to 600°C of approximately 100 minutes.
TC - 8D:
Designed to improve the temperature stability and temperature setting obtainable with the energy regulator supplied as standard with the SB series of fluidised baths. The TC-8D is a self contained unit and is supplied complete with a chromel/alumel Type K thermocouple which fits into the sheath supplied with the SBL baths. The unit has digital set point and readout of bath temperature on an LED display and incorporates PID control. |
|
340/C1 Single input K-type with GK12M , carrying case
341KC1 Single input K with GK11M, battery and boot
341KC2 Single input K with GK13M, battery and boot
343C1 Dual input K-type with (2) GK11M, A304, A340 soft pouch (For
High Temp. over 400°F)
343C2 Dual input K-type with (2) GK13M, A304, A340 soft pouch (For
Low Temp. under 400°F)
343C3 Dual input K-type with (2) CK21M, (1) GK13M, A304, A908
carrying case (For Diff. Temp.)
351/F1 Water proof single input thermistor, bipole connector, boot,
FX12B
362/C1 Dual input, J/K/T w/two GK11M, clamp straps, battery & hard
carrying case
363 Tuffman single input sub-mini K-type with A604 protective boot
and NO PROBES
364 Tuffman single input sub-mini J, K, T w/ record and A604 boot
and NO PROBES
365 Tuffman single input Lumberg K-type with A604 boot and NO
PROBES
366 Tuffman single input Lumberg J, K, T w/ record and A604 boot
and NO PROBES
VKF300M K-type Fahrenheit Calibration Box
VKC300M K-type Celsius Calibration Box |
|
TH-2A Temperature and Humidity Probe
- For industry, laboratories and hospitals
- Temperature measurement in °F or °C
- Humidity measurement (relative humidity R%)
- MIN and MAX storage with time indication
- Auto power off
- DATA HOLD
- Dual LCD display |
|
HUMIPORT 05/10/20
Handheld Thermo Hygrometers
Handheld thermo-hygrometers of the HUMIPORT series set new standards because of the combination of the latest technology and design. HUMIPORT thermo- hygrometers offer very accurate measurement of relative humidity and temperature and also calculation of dewpoint temperature and absolute humidity.
Excellent readability of the very large and illuminated display, the simple thumbwheel operation and the very robust case also allow use in tough industrial environments.
3 models are available:
HUMIPORT 05: Compact handheld thermo / hygro- meter with fixed sensing probe
HUMIPORT 10: Handheld thermo / hygrometer with fixed sensing probe
HUMIPORT 20: Handheld thermo / hygrometer with flexible sensing probe
OMNIPORT 20
Multifunctional Handheld Instrument
To measure various climate and processes values with a handheld, user-friendly instrument requires extraordinary measurement technology. The handheld meter of the OMNIPORT 20 series meets these multiple demands.
The selection of the appropriate sensing probe and accordingly the configuration of the handheld meter allow for displaying the following values with the highest accuracy:
relative humidity RH
temperatur T
dew point temperature Td
absolute humidity dv
mixing ratio r
air velocity v
water activity (in oil) aw
water content (in oil) x |
|
The most advanced portable Relative Humidity Meter available today. Utilize the power of mobile PCs to display, record, document, annotate and report measurements with GrayWolfs accurate, fast response sensors.
-Measures %RH, Temperature, Dew Point, Wetbulb Temperature, Humidity Ratio, Specific Humidity, Absolute Humidity and more...
-Stores enhanced survey information; data and text and graphic notes and specific data file names and more...
-On board sensor tips, calibration & care information, help files and more...
-Extremely easy to use
-Desktop data analysis and reporting w/included WolfSense PC software
-Optional WolfSense ARG Advanced Reporting software makes recurring report generation quick and efficient |
|
%RH, °C td/tpd, gm3, g/kg,aW, °C, J/g, hPa, U/min, mA, VOL% CO2, ppm CO
•Reference humidity: Inter-laboratory test in national/international institutes confirms sensor accuracy of ±1 %RH
•Precision temperature: System accuracy up to 0.05 °C, resolution up to 0.001 °C
•Probes for measuring the process and indoor air humidity
•Calculation of all parameters of the psychrometric chart
•Convenient measurement data administration, reading memory up to 500,000 readings |
|
- Fast response time
- 3% accuracy, Relative humidity (RH) 10- 25%
- Temperature -5° to 175°F (-20° to 80°C)
- Data record function for maximum and minimum temperature
and humidity reading
- Serial output through RS 232C
- 39” cable length, hard wired
- Data hold and Auto Power Off
- Protective boot included |
|
Applications:
Compact thermohygrometer with a lot of features, perfect
for measuring ambient conditions:
HVAC, food storage, buildings, offices, production plants.
Easy to use: For detecting critical temperature-humidity
environments, e.g.: mould in living quarters
- Building industry
- HVAC
- Education
- Laboratory
- Food (process & storage)
Features:
- Very fast capacity humidity sensor from the switzerland
- Indicates dewpoint and wetbulb
- 1-second measuring interval
- MAX-MIN-HOLD-Function
- C/F-switchable
- Switchable Auto-off-function
- Incl. pouch and stand |
|
Dry lumber will pick up moisture if stored in a moist place. Beautiful wood floors will cup when ambient conditions change. Furniture suffers severe damage when moving from a wet climate to a dry climate. Chairs may have loose joints, cabinet doors may not close. Even a piano can be out of tune from too much moisture. For lived-in areas at 70oF (20oC) and 35% rel. humidity, wood stabilizes at 6-8%. Changes of these conditions can cause shrinking, cracking or warping.
We recommend the PN Hygrometer for low relative humidity readings and a short response time. |
|
| The TRH22 measures relative humidity (RH) and temperature. It measures humidity from 0% to 100% and displays temperature from -20 °C (-4 °F) to 60 °C (140 °F). in either Fahrenheit or Celsius. Dual display shows both values simultaneously. |
|
The new launched BTU meter with RS-485 output allows user collect the output signal to computer for analysis. this also facilitates the programming!
The BTU meter is designed for energy calculation. It contains necessary circuits to measure flow rate and temperature for calculating, logging and displaying. Together with velocity-type flow sensor and platinum temperature sensors, the meter measures flow rate and temperature, and calculate the energy consumed. The meter can be conveniently read from and 8-digi display with units and symbols. All the data are stored in the non-volatile flash memory of the microprocessor. It can be applied to dormitory, shopping mall, department store, hotel and etc. |
|
The BFS is designed for applications requiring a constant high temperature source for calibration. The BFS has a hinged lid and a cylindrical bath 218mm in diameter and 254mm deep. Substantial fire brick insulation is incorporated within the outer container and the lid.
Standard equipment includes a separate air supply control unit which incorporates two flowmeters for monitoring the air supply and a charge of fluidising medium (aluminium oxide) and air diffuser (zirconium oxide). |
|
Precise measurement and control of Humidity (%RH) and Temperature is essential in the pharma, food, chemical and other industries. The models featured here suits various applications of simultaneous measurement and control of %RH and Temperature. Indicators are available for simultaneous display of temperature and %RH on 0.5%u201D to 4%u201D large displays. PID controls are available for maintaining %RH and Temperature in the stability chambers, Walk in chambers, dryers etc%u2026 Eight and Sixteen channel Data loggers with suitable sensors and transmitters are available for validation of chambers, storage rooms etc%u2026 Small models are also available for monitoring of %RH and Temp. in server rooms, clean room storage, hot air driers etc%u2026 All models are available with serial interface for communicating with computer. 21 CFR part 11 compliant software is also provided as per FDA regulations.
APPLICATIONS
For BOD, Environmental/ Walk-in test chamber, HVAC applications and for validation purpose
|
|
| Quest Technologies offers a variety of thermal environmental and WBGT heat stress monitors. Datalogging heat stress monitors also available. |
|
Digital UP/DOWN timer displays Temperature, Humidity, and Heat Index
* User settable Heat Index alarm
* Stopwatch/chronograph mode with 1/100 second resolution
* Fastest/Slowest/Average Lap recall
* 99 lap counter with 30 lap/split memory
* 10 hour countdown timer with audible beeper warning for the last 5 seconds
* Programmable alarm
* Calendar mode displays day, month, and date |
|
AHT-300 series, utilizing temperature and humidity integrated sensor with high accuracy, and the micro electronic circuit design, which ensures its high stability, is perfect for the HVAC system to buildings, offices, server rooms, residential applications, green house, warehouse, food transportation, environmental control and etc.
In addition, LCD display is also an optional function that provides a simultaneous indicator on site. For installation, there are two different mounting type, wall-mount and duct-mount, in which the duct-mount type designed with dust-proof housing is perfect for severe environmental applications. |
|
EE10 Series
HVAC Humidity & Temperature Transmitter for Indoor Applications
EE10 room transmitters are the ideal solution for indoor applications such as HVAC in residential and official buildings.
The very stylish, functional housing makes easy installation and fast exchange of the sensing unit for service purposes possible.
The standard humidity output of EE10 transmitters is 4 - 20 mA or 0 - 10 V. The temperature output signal can be active or passive.
All EE10 versions can be equipped with a good legible LCD display.
EE16 Series
Humidity & Temperature Transmitters for HVAC Applications
EE21 Series
High-Precision Humidity / Temperature Transmitter for HVAC
EE22 Series
Humidity / Temperature Transmitter with interchangeable Probes
EE23 Series
Multifunctional Humidity / Temperature Transmitter
The EE23 series stands for multifunctionality, highest accuracy, easy mounting and service. The new IP65 water proof housing concept offers easy installation and the possibility for fast exchange of the sensor unit for service purposes.
Following models are available for selection:
A and B versions are dedicated for wall or duct mounting
C version with the remote sensing probe has a working temperature range ?40...120 degC
F wall mounting version with rear cable outlets is dedicated for clean room applications
G version with optional radiation shield is dedicated for meteorological applications
H version remote miniature probe for concealed mounting (e.g. in museums...) or in tight spaces |
|
Intrinsically safe Non-Contact Temperature Meters Ex-MX2 / Ex-MX4 BT
Intrinsically-Safe Non-Contact Temperature Meter Ex-MP4
Intrinsically-Safe Sensor-Temperature Measuring Unit Ex-Pt 720
Handheld Infrared Thermometers 63, 66, 68 |
|
JOFRA ATC-125 - the coolest temperature calibrator in the world
The JOFRA ATC-125 ultra cooler features a unique technology for optimum performance and superior temperature homogeneity throughout the block at very low temperatures. The JOFRA ATC-125 ultra cooler is the world's first temperature dry-block calibrator capable of reaching -90°C. Featuring patent-applied for Free Piston Stirring Cooler (FPSC) technology for cooling, together with a special heating element, the ATC-125 offers high accuracy, excellent stability and extremely fast heating and cooling times.
The ATC-125 ultra cooler calibrator may be used to perform fully automatic calibration routines without using an external computer. It is also possible to use the computer for full upload and download capabilities. The ATC-125 may also be supplied with inputs for external reference sensors and for sensors-under-test. All ATC calibrators feature RS232 serial communication and the standard delivery also includes the JOFRACAL calibration PC software.
|
|
Protimeter HygroTrac
The Protimeter HygroTrac is a simple and cost-effective system for remote environmental monitoring in buildings. Data can be viewed live over the internet showing parameters such as moisture content relative humidity and temperature.
Set threshold alarms
Receive alarm warning via email and text message
Comprehensive site reports
Reduce costly site visits
Wireless Sensors
Transmit data at user-selected intervals to data acquisition gateway.
%RH
Temperature
Moisture content in materials
Data Acquisition Gateway
Data collection point receives and stores data from all wireless measurement sensors. Information is then sent to a secure web server. Data can also be stored directly on the gateway if an internet connection is not available.
Applications:
Permanent installation into a wide range of building environments where moisture and subsequent mold growth is a concern.
Monitor storage facilities where moisture sensitive products are held such as paper and timbe |
|
MOLTEN METAL TEMPERATURE INDICATOR
PRODUCT DESCRIPTION:
Libratherm offers microcontroller based Molten Metal Temperature Indicator model LMI-2010, which is designed to accurately measure temperature of the molten metals, both ferrous and non ferrous. The measurement of this temperature is a critical process, since the expendable thermocouple is dipped for merely 3 to 4 seconds and then withdrawn. In this short measurement time, the operator is guided through the measurement cycle by audio/visual alarms for thermocouple continuity, measurement in progress and measurement over. Any error in measurement or thermocouple open condition is also immediately detected by activating the audio/visual alarm.
User can select the desired type of thermocouple (either K, R, S, or B type, (depending upon the measuring range from 1200 to 1800oC), and can also set other parameters using front panel key board. During measurement, the indicator ignores the slag temperature and the Average or Plateau reading is determined using the advanced algorithm and the same is latched and displayed on the bright 7 segment 2” LED display. This reading can also be displayed on 4” remote display LRU-2010 and can be logged on to a computer using serial RS485 MODBUS RTU protocol for recording and analysis purpose. Libratherm offers supporting window based software.
|
|
This is the key tool for all professionals in HVAC and industry fields.
AMI 300 can measure, store up to 12,000 values and restore on PC (wireless communication) up to 6 parameters alternately.
Pressure, temperature (RTD, thermocouple, NTC), humidity, air quality (CO/CO2), air velocity and airflow (vanes or hotwire), tachometry.
For visual comfort, AMI has a large colored display and easy browsing is done thanks to its joystick on keypad.
Innovative and evolutive :
- AMI can be equipped with wireless probes (Radio frequency) supplied with a multifunctional key allowing measurement and settings.
- It can be equipped with interchangeable measurement modules which are individually calibrated and are automatically recognized by the instrument thanks to the Smart-plus system.
- These measurement modules are available for pressure, thermocouple temperature (4 channels), climatic conditions (hygrometry, air pressure and temperature) and current/voltage parameters.
- For instance, AMI can be equipped with several pressure measurement modules with different measuring ranges. This new system allows evolution according to measurements that must be carried out…
- Based on the same principle, all probes have the Smart-plus system and are therefore automatically recognized by the instrument. Probes are available with adjusting or calibration certificate.
* exept thermocouple probes
- A large choice of probes allows a step-by-step evolution of the instrument according to your needs : vanes Ř 14 mm, 70 mm and 100 mm, high resistance gooseneck–shaped hotwire, CO/.CO2, multifunction, high temperature hygrometry, RTD probes, thermocouple... |
|
The Rosemount 248 Temperature Monitoring Assembly was designed to meet temperature monitoring application requirements. This head mount transmitter with HART® protocol can easily be ordered with a variety of sensors, connection heads, and thermowells. All of this comes in a Rosemount product design to provide an accurate, reliable reading.
Easy to Order. Transmitter and Sensor Assembly in a Single Model Number
Ready to Install. Remove It from the Box and Install into the Process for significant cost savings
Unsurpassed Performance for Temperature Monitoring Points
Industry Standard DIN Form B Size Enables Mounting in Any Connection Head
Reliable EMC Performance by Meeting NAMUR NE 21 Recommendation
Communicates Using Open HART / 4-20 mA Protocol |
|
The SCAN infrared line scanner is used for remote temperature map measurement (thermography) for process control monitoring.
This fast speed infrared imaging (up to 400 lines per second) has applications in a wide range of industries such as:
• cement
• glass
• steel
• metallurgy
• paper
• tobacco
• plastic
• electronics
|
|
SITRANS FUE1010 is a highly accurate clamp-on non-intrusive ultrasonic flowmeter for revenue grade thermal energy sub-metering and energy efficiency distribution monitoring, with a real time coefficient of performance (COP) for HVAC systems. The meter is available in single and dual channel or dual path configurations, with your choice of IP65 (NEMA 4X) dedicated wall mount or IP40 (NEMA 1) portable enclosures.
|
|
|
|
Temperature measurement instruments
