|
|
IMPAC Infrared provides numerous mechanical and electrical accessories for its products.
Mechanical accessories e.g. contain:
• Cooling jackets
• Mounting devices
• Flange systems
• Industrial laser aiming lights
• Air purge units
• Emissivity enhancer for low temperature metal measurement and aluminium
• Continuous casting measurement system
Electrical Accessories e.g. contain:
• Power supplies
• Indicators
• Converters
• Protocol converters
• Hand held terminals
A comprehensive professional software package for various industries is also offered to customers.
For detailed information please see:
www.impacinfrared.com/EN/products/accessories/accessories.html |
|
A portable sulphuric acid dewpoint monitor (Lancom 200) is designed specifically for plant requiring only periodic monitoring of the sulphuric acid dewpoint temperature for professional boiler efficiency checks, corrosion protection and evaluation of the effectiveness of corrective measures such as fuel additives and changes in the combustion conditions.
A continuous sulphuric acid dewpoint monitor (Model 440) is permanently installed in order to optimize combustion conditions by maintaining the temperature of the flue gas slightly above the sulphuric acid dewpoint temperature. It can continuously monitor the changes in boiler operation and provide a direct loop input to the boiler's own combustion control system. |
|
standard, DN63-80-100-125
"all stainless steel" DN100-125-150
watertight estate, DS80-125
|
|
Dresser Instruments pioneered the easy-to-read Maxivision® dial on the Ashcroft® bimetal thermometer. The Ashcroft® Maxivision® dial eliminates parallax error and can be read at any angle making it the easiest-to-read dial on the market today.
Ashcroft® bimetal professional thermometers are manufactured at an ISO 9001 certified facility in Stratford, CT to ASME B40.3 Grade A accuracy of 1% of span. The Ashcroft® bimetal thermometers come in 2", 3" and 5" dial sizes and in Farenheight, Celcius or dual scale ranges. Various configurations are offered with hermetically sealed cases such as lower, rear or everyangle connections with a tamper proof case or an external adjustment, depending on your needs. Standard stem lengths range from 2 1/2 through 24 inches while non-standard stem lengths up to 60 inches can be custom made. Trained product specialists are available to assist in the selection of thermowells for applications where the bimetal stem will be exposed to pressure, velocity or corrosive fluids.
|
|
Versatile stainless steel professional thermometer, available in 1" to 6" dials in a hermetically sealed case. Winters' Bi-metal Thermometer features a 1% accuracy Grade 1A, back, bottom and adjustable angle connections, and an anti-parallax dial that reduces operator reading errors.
Applications: Industrial Process, Food Processing, Wastewater |
|
The IR-R0 series is practical use type blackbody industrial furnaces that are used as the standard unit for comparison calibration of radiation professional thermometers.
NRLM Type Comparison Blackbody Furnaces IR-R24, IR-R26
High Temperature Comparison Blackbody Furnaces IR-R27
NRLM type comparison blackbody furnaces, which have been jointly developed with the National Research Laboratory of Metrology, are large opening blackbody furnaces for calibration of radiation thermometers, and a high temperature comparison blackbody furnace uses a standard radiation thermometer for comparison calibration.NRLM Type Comparison Blackbody Furnace
Practical Use Precision Type Comparison Blackbody Furnaces
IR-R6, IR-R7, IR-R8
Practical use precision type comparison blackbody furnaces cover the temperature range of 100 to 3000°C by 3 kinds of blackbody furnace and calibrate radiation thermometers accurately. |
|
Blackbodies are reference sources used for testing infrared systems. They are required in industry for calibration of pyrometers, infrared line industrial scanners or professional cameras.
In Defence, they are part of benches for characterisation of complex optronic systems. HGH offers a wide range of blackbodies to cover all Customers’ needs:
- DCN 1000N Differential blackbody for characterization of infrared system performances
- RCN High temperature cavity blackbody for calibration of infrared sensors
- ECN 100 Extended area blackbody for field tests and calibration without collimator
- DCN 1000L Low temperature blackbody
- DCN 1000N Vacuum cryogenic temperature blackbody for space borne systems testing
In addition, HGH have the ability to design specific infrared sources on request.
In many cases, blackbodies are associated to test targets/target industrial wheels and incorporated into infrared collimators (IRCOL).
Contact us with your specifications. |
|
Calibration Sources or blackbodies are radiation sources with a nearly ideal emissivity in the infrared spectrum. These products generate reference temperatures for the calibration of industrial thermometers, pyrometers, imaging systems and spectometers (Temperature ranges from -40 to 3000°C).
An extensive range of blackbodies guarantee the transfer of national calibration standards according to e.g. NIST, DIN/ISO and DKD. The instruments are used across industry and research. All blackbody calibration sources, wether standard or custom, are designed for the highest emissivity possible, largest aperture sizes and highest accuracy.
For detailed information please see:
www.impacinfrared.com/EN/products/calibration-sources/calibration-sources.html
or
www.mikroninfrared.com/products/products-s3-blackbody.htm
|
|
A comprehensive range of six LANDCAL blackbody calibration sources provides high precision calibration of radiation professional thermometers within the temperature range -10 to 1600°C/15 to 2900°F, both on-site and under laboratory conditions.
The sources are divided into two main groups, classified as being either primary or reference standard. The primary and reference standard sources are further divided into Portable, Transportable or Bench mounted groups.
Primary Standard Sources
The calibration of a primary source is traceable directly to National Standards via a certified probe installed in the radiation cavity.
Reference Standard Sources
Traceability to National Standards can be achieved either by using optional certified radiation thermometers for calibration by the comparison method, or by purchasing a certified source. |
|
| Datapaq prides itself on having the most comprehensive range of temperature profiling equipment available to suit many applications including systems for narrow or low clearance industrial ovens, high temperature processes and confined space systems. We have systems for electronics manufacturing, food processing, high temperature metal heat treatment and ceramics firing. Whether your process challenge is high temperature (up to 1300°C), has a duration of days, includes wet or steam environments, requires real-time monitoring, and many more, we have the range and the price to suit. |
|
Liquid and odd/big size sensor calibration
Two models of the ATC series (ATC-140 and ATC-250) fitted with a 160 mm deep well with a diameter of 63.5 mm (2.5 in) can be used both as dry-block professional calibrators and as liquid calibration baths with a magnetic stirrer.
A liquid bath and a dry-block diameter of 63.5 mm (2.5 in), which is twice the size of any other JOFRA dry-block, are both new in the JOFRA product range. With these options it is now possible to calibrate even more industrial temperature sensors at the same time and to calibrate large as well as odd sizes and shapes of detection, which were not possible to calibrate in the existing range. The compromise compared to the existing models is longer cooling, heating and stabilization times.
ATC-140 & ATC-250 can be used without an external reference sensor, but if a STS-100 reference sensor is connected directly to a B version or the JOFRA reference industrial thermometer DTI-1000, you obtain better accuracies and thereby use the full potential of the calibrators.
|
|
Compact, accurate and reliable liquid baths for the temperature calibration of thermal detectors.
- 5, 7 and 12 litres.
- -35°C* to 250°C.
- Temperature stability as good as ±0.005°C.
- Drain professional tap.
- Water cooling coil.
For use in the area of temperature calibration this range of compact liquid baths offers exceptional control stability over a temperature range of -35°C* to 250°C.
The bath comes in 5, 7 or 12 litre capacity with a choice of controller options giving control stability as good as ±0.005°C. |
|
The new calorimeter from DDS has a revolutionary vessel. The vessel features safety standards, data tracking requirements and reliability.
The vessel is the heart of the calorimeter and features a printed circuit board containing; a microprocessor, memory, temperature sensors suppliers and other electronics, which are built into the base of the unit.
The solid-state temperature detection are strategically placed around the outer wall of the vessel and are embedded into the aluminum ‘skin’ of the unit. The position of the sensors integrates the various temperature readings obtained from the outer surface of the stainless steel core. The way in which a sample burns causes a varying heat pattern transfer to the core.
An added benefit is that the memory of the unit is permanent, requiring no battery to retain the data.
|
|
Nominal Sizes:Ø63mm,Ø100mm and Ø160mm
Types : Bi-metal, Liquid filled and Mercury filled Themometers
Accuracy: CL ±1% and CL ±2%
Temperature Range: -30/ 60°C 0/120°C 0/160°C 0/200°C 0/250°C
0/300°C 0/350°C 0/400°C 0/500°C
Conformity: EN 13190 |
|
3 possibilities to mount
- frontpanelmounting with integrated springclips
- frontpanelmounting with 3-hole front flange
- surface mounting with back flange
without bi-metal compensation
accuracy ± 3 %
case: ABS, black or white
window: Plexiglass
options:
- coloured professional scale
- available case colours blew, red, yellow, green
- fronframe and case ABS chromed
- u-clamp |
|
Indicators
Bimetal measuring system
Liquid- or gas-filled measuring system
Microswitch contact
Accessories
Panel- and surface-mounting
Panel-mounting
Slow-break contact
Accessories
Contact dial industrial thermometers in a steel or stainless steel housing, 1 switching output, 100 and 160mm diameter or square bezel 96 x 96mm, Class 1, Protection up to IP65 (60.8425)
|
|
Digital pyrometer RT903 with external sensor at only 18,- Euro!
Small and handy digital thermometer with immersion probe, which is fixed by magnet to the thermometer. The cable length is 1 m.
With a measuring range of -50... 300°C and an accuracy of plus/minus -1°C this instrument is usable for many applications. The resolution is 0.1 and the sampling rate 1 sec. The digital thermometer's protection is IP65 and it offers many features:
- High and Low Alarm
- HOLD Feature
- Memory of MAX and MIN temperature
- Auto power off
- °C / °F selectable
This thermometer is one of the new low cost series of B&B's temperature measuring instruments. Also available: Digital Thermometer for surfaces, Digital Thermometer with exchangeable detection, Solar Professional thermometers, Hygro-Thermometers...
See more information in our shop:
***www.temperature-shop.de***
*Price valid excluding tax and transport charges
|
|
Temperature Indication Module with external sensor and alarm output (frequency output 4kHz) for the activation of a buzzer (additional circuit necessary).
Features:
- Digital temperature display
- External sensor (3 m cable)
- Alarm output
- Quick mounting
- Power feeding by battery
See more information in our shop:
***www.temperature-shop.de***
|
|
Electronic Industrial Thermometer without
external auxiliary power and with new, integrated measuring transducer
The microprocessor controlled industrial thermometer SIKA SolarTemp/DiTemp works with a Pt 2000-sensor.
This means compared with conventional dial professional thermometers decisive advantages in accuracy and sensor installation possibilities, without maintenance at the same time.
Fully electronically, and without the need for auxiliary power, the SolarTemp/DiTemp guarantee high precision with long-term stability at detailed registration of measuring values for the full range of the projected lifetime.
The measurement elements are free of wear by doing away mechanical components.
For high explosive Applications an intrinsically safe version of the SolarTemp / DiTemp is available.
|
|
"Plant automation has an increasing demand for compatible and cost effective control units.
Fluid power or lubrication systems for this range of applications require for the precise control of the fluid temperature compact controls which intergrate simply into both, the electrical control system and the mechanical installation.
Beside just alarm outputs it is more and more requested to provide also continous signals for remote processing.
The Thermotronic 71 has been particulary designed for this kind of applications . Directly attached to the temperature sensor specifications, the unit can be installed on to the tank top. Alternatively, the control unit can be wall mounted with an intermediate cable to the sensor.
The Thermotronic is microprocessor controled and easy to programme by three keys. The Light emitting diode display provides excellent visibility and indicates also all status information.
The actual operating temperature of the fluid can be displayed either in °C or °F.
Depending on the version, the Thermotronic provides either two adjustable alarm outputs, or two alarm outputs plus a 4-20 mA signal.
LED-display with excellent visibillity
two adjustable alarm outputs
or
two adjustable outputs plus a 4-20 mA signal
easy tank top or remote installation
ready for installation delivery
easy to operate" |
|
GMH 175
Battery powered digital-precision industrial thermometer
for plug-in probes Pt1000 2 wire
range: -199,9 / +199,9°C
display: 3 ( + ”-” Zeichen)
display size: 13 mm
resolution: 0,1°C
accuracy: ± 1 digit between -70...+199,9°C
professional power supply: 9 V battery, type IEC 6F22
lifetime of battery: approx. 200 operating ours
case: ABS, impact resistant
accessories: GES 175
Pt1000 2-wire, class. B, insertion probe
download datasheet |
|
SmartMeter - Portable Temperature Meter
SmartMeter is a portable dual channel temperature meter which accepts 2 simultaneous thermocouples, Pt100 detection or mV signals.
It features a slick yet sturdy enclosure with protective rubber corners and improved hand grip. The swivel stand provides bench position and is also a professional belt carrying fixture.
A high contrast multi-segment LCD display with specific icons shows min/max, hold, difference and average measurements.
Product Details
Measures 2 simultaneous thermocouples (types J, K, T, E, N, R, S and B), Pt100 RTD and 0-50mV signals with decimal point.
Temperature unit Celsius or Farenheit.
User friendly configuration interface.
Performs about two samples per second.
Allows a custom range limits configuration for the 0-50 mV input with decimal point.
Programable auto shutt off time.
Low battery indication.
Internal buzzer for alarm indication.
Input for external power adaptor.
Shows min, max and average measurements.
Shows relative and difference values.
Function Hold.
Allows the user to refine calibration values.
Includes thermocouple type K.
Long lasting battery life.
Excelent handling, light and allows belt carrying.
Sampling rate: 2 measurements per second.
|
|
* Digital pyrometers ( DTM-800) :
_CE-Mark approval
_Hand-Held lightweight design
_With pocket hook
_Highly accurate professional thermometer
_With MAX/DATA HOLD function
_Auto-power off function
_With XC and XF function |
|
|
|
Temperature measurement instruments
