|
|
…from 5 g to 3,000 kg are especially easy to load.
• 1 x 3000e | 2 x 3000e (for legal metrology); class III
• High resolution can be set
• Ultra-low profile design; IP68 protection
• Painted or stainless steel finish (also electropolished)
• Can be used in Zones 1, 2, 21, 22 | FM CLASS I, II, III, DIV. 1 |
|
- Automatic calibration with external mass
- 7 segments display, small decimal digits
- On/Off display
- Data interface: RS232 I/O baud rate and parity adjustable - Remote control (tare-print, etc)
- User friendly membrane keyboard
- Sampling: with 10 pieces and multiples till 100 pieces
- Remote control (tare-print, etc.)
- Easily adaptable to environment thanks to a digital filter selectable by the user
- Bar-graph: indicates the remaining capacity of the balance even after zero taring over the whole range
- Operating temperature:10/ 40°C (optimum: 15/30°C)
- Stabilization time: 2/3 sec
- Linearity: ± 2 LSD
- External power supply: 220V - 15% / +10% 50 Hz
- Power consumption: 14 VA
- Structure and base manufacrured with structural steel oven painted
- Zinc plated platform and mechanical parts
- Magnetic load cell of our production set on a levers system and protected against dust and also splash proof
- Levelling feet
|
|
Hygienic-washdown design to meet special requirements for easy, thorough cleaning and rugged daily use in the food industry.
• AISI 304, stainless steel (Platform optional: AISI 316 Ti stainless steel electro polished)
• 4 display and control Units, type of protection IP67
• Platforms with type of protection IP68 + IP69K
• 3 platform dimensions
• 6 weighing ranges from 3 kg to 150 kg
• Overload protection
• Temperature range –10°C....+40°C
• 2 verifiable versions, accuracy class III, resolution 3.000 e and 2 x 3.000 e
• 2 versions non verifiable, resolution 15.000 d, 30.000 d |
|
Liebel Weighing System
The automatic and dynamic checkweigher can be operated in miscellaneous production environments. In addition to the characteristic use as checkweighers, they can be employed as well as trend control in order to optimize filling- and volume dosing systems. In the use of these feedback control systems the weighing system will enable an optimization in product usage through precise and dynamic weight filling. LIEBEL weighing systems offer a very interesting cost- / benefit- relationship.
- Special designs for the food industry with IP 65/66 protection
- Polished stainless steel housing for easy wet cleaning in highly hygienic production environments
- Free choice of system management languages
- Management of up to 150 article memory cells
- Easy-use and intuitive display with softkey controls
- Many options, special designs and output systems offer usage in a wide variety of industry settings
- Administration of captured data by integrated protocol printer and flash-card with Ethernet bus
- PC software for importing and organizing statistical data |
|
Chatillon hanging scales are found worldwide and used in industrial, scientific, educational, commercial and home applications. Our hanging scales are known for their quality and reliability and they offer unsurpassed accuracy and performance.
|
|
CESI certificate is valid all over EU; the instruments are suitable to be used in presence of dangerous, inflammable or explosive gases or vapours belonging to group II B (i.e.: paints, solvents, propane, ethylen). The balances are made of two parts:
- The weighing unit, that includes the weighing cell and the functional commands, intrinsic security construction
- The control unit, that includes the whole electronic part according to security rules EEX q II B T5 (quartz dust).
|
|
The group of weighing and automatic labelling at Gemini high speed functions under a computing system able to treat the weighings with speeds going to 150 products per minute.
For detailed information, visit www.preciamolen.com |
|
| Very High speed load cell interface that was especially designed for WIM application either trucks or trains. The LCIC-WIM comes with embedded application calculates "on the fly" the axle weight, axle speed and distance between axles. With 52000 samples per second high resolution A/D and powerful DSP that runs the WIM application on board, it consider to be the fastest and most intelligent Load Cell Interface that is available today in the market. The LCIC-WIM equipped with USB and RS232/485 and comes with drivers and full examples on how to communicate with the board and our monitoring package that helps to analyze the scale behavior under different speeds. |
|
Electromechanical load limiter for cranes, bridge cranes, etc.
No modficiation of wire rope needed for installation, the system is fixed on the dead end cable.
Once the prefixed load has been overriden, a relay is activated and the lifting movement of the crane is stopped.
The load limiter is supplied already set to the required capacity.
Technical characteristics
· Limiter capacity from 100 kg up to 10.000 kg per wire rope
· Cable diameter from 6mm up to 30 mm
· Elastic body of special improved steel
· 1 to 4 micro iswitches 64Am, 380V with protection IP 67
· Working temperature -30º - 60º
· Beakage coefficient 500% of nominal capacity
· Accuracy +/- 1% |
|
FEATURES
T050E is a weight transmitter amplifier microcontroller based. Four push buttons and one display that shows the guide messages, help the operator in the configuration and weight calibration.
T050E is equipped with two serial lines, a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). On T050E is also available an analog output that can be configured for 0-10 V or 4-20 mA. One or four relays, according to version, can be associated to a function required by the application. In the overload control modality (option) the instrument can be associated to category 1 as a security device (UNI EN 954-1 12-98 norm). A new load cell signal averaging method FIR, linearization and user friendly approach are the best characteristics of this transmitter.
APPLICATIONS
Weight transmission
Overload control and lifting device applications
|
|
The group of weighing manual labelling I 500 makes it possible to carry out the labelling of the fresh produce in the small boats under films.
Of a great facility of use thanks to its touchscreen, I 500 gives access easily the operations of weighing labelling (use, programming).
I 500 was designed for an integration in the corporate network (operation multipost, exchange of information by network, Ethernet TCP/IP or key USB, connection to the databases of the company.
Its great memory size is the guarantee of a traceability total (number of operation and single DSD, management of the batches, data of traceability skeletal per family of products.
For a faster seizure of the data, the terminal I 500 can be equipped with a keyboard of the type PC and a reader of bar code.
The group I 500 is composed:
Of a terminal of weighing I 500:
- an accessory measures
- 2 ports series
- 1 parallel port
- 1 port USB
Of a platform R1 DLS
Of a printer P950 or P970
Of a key USB 64 Mo
Of CD creation of labels
In option:
- second printer
- second and third ways of measurement
- Ethernet port
|
|
| Sartorius offers mass comparators for calibration and verification of weights and mass standards in national primary standard laboratories, calibration laboratories as well as in laboratories of verification, weights and measures, and metrology offices. |
|
From 3 kg/6 lb to 300 kg/660 lb, the Ohaus Industrial Bench Scale line offers a product which meets your needs for value and performance.
ChampTM II
A rugged, easy-to-use bench scale with basic weighing or parts counting functions
The Champ II line combines the popular CD-11 indicator with a 304 stainless steel platter and polyurethane painted steel frame. With a U.S. NTEP LFT resolution of up to 1:7,500, the Champ II series features rectangular platforms in 12" X 14", 16" X 20", and 17"X 22". Whether you are weighing in g, kg, lb or oz, the Champ II signifies a value in bench scales.
Capacity: 15 kg (30 lb) to 300 kg (600 lb)
Readability: 0.002 kg to 0.05 kg |
|
The LCIC-WIM is a Very High Speed, Intelligent Load Cell Interface Card that was designed for applications like Weigh Trucks / Trains in motion. You can get the LCIC-WIM with embedded application for axle by axle weighing even in high speed.The on-board powerful DSP in running our andvanced algorithm and calculates on-the-fly weight and speed per each axle and distance between axles.
|
|
Multi channels weight transmitter type G4-RM
The G4-RM transmitter is a new generation of multiple weighing transmitter / indicator.
It is based around a main frame with:
One LCD screen two lines 16 characters
A 4 keypad pannel
One CPU unit with RS232; RS485 serial communication in Modbus RTU, an one Ethernet communication interface in Modbus TCP for easy connections to PLC & supervision.
The CPU card is also equipped with a USB connector for Back Up and restore or for a printer / key board connection.
The G4-RM can also handle up to 6 weighing channels through the WF-IN1 and WF-IN2 weighing cards with an internal 24 bits A/D converter and can reach a speed reading of 300 readings / sec or up to 1200 reading / sec with the weighing card HSWF-IN1 or 2.
Each weighing channel is equipped with 4 digital Inputs and 2 digital Outputs.
All set up can be done via the 4 push buttons keys panel or a dedicated software running on PC
All set up can be saved and restore on the internal memory or on an external USB memory stick.
Field buses: Profibus DP or Device Net can be installed on the CPU card as an option.
|
|
| The NEW Series-C² is a combination Multihead weigher designe to weigh, at high speed and with extreme precision, various types of products. The working principle is based on the distribution of the product onto weigh buckets and on the identification of the best discharged combination, which is reached through an algorithm of combinatorial calculation, in order to obtain the best possible speed/precision relation. The Multihead weigher is subject to a mechanical customization based on the specific characteristics of product. |
|
Inline Multihead Weighers
The MLC range of multihead weighing machines is a compact and cost effective weighing solution. Sensors maintain a controlled feed into the infeed hoppers and the special two way top boxes maximise computer selections within a compact size. Supplied in 1/4 litre, 2 litre and 6 litre capacities, weights from 2gms up to 15kg can be handled with a high degree of accuracy. Also available is our specialist range of MLC 8/16 Multihead weighers for long piece products up to 400mm long.
Features
* Automatic self setting
* Multi screen access
* Variable stagger discharge
* Security key switch
* Defrost prevention
* Statistical information
* Self diagnostic
* Intelligent randomisation
* Count and weigh modes
* 100 product memory
* Compact design
* Enclosed pneumatics
* Lift off top boxes
* Lift off weighpans
* Enclosed Vibrators
* Enclosed weigh head assembly |
|
Sartorius is more than just a supplier of products.
Working together with you, we will engineer a solution for integration of a weighing sensor (or a force sensor) into your equipment or machine.
Put us to the test – just contact us!
The overview of our range of weigh and load cells will help you narrow down your selection and give you an impression of the capabilities we can offer you.
|
|
Automatic on-board check weighing systems for material handling vehicles.
The SkidWeigh product line is using hydraulic pressure transducer installed in lifting circuit to measure the load placed on the forks. Heavy duty,simple two button calibration, can be installed by forklift technician.
Systems are available world wide. |
|
- Automatic calibration with external mass
- On/Off display
- Data Inteface: RS232 I/O baud rate and parity adjustable
- Remote control (tare-print, etc)
- Operating temperature: : 10-40°C (optimum 15/30°C)
- User friendly membrane keyboard
- Sampling: with 10 pieces and multiple till 100 pieces
- 7 segments display
- Easily adaptable to environment thanks to a digital filter selectable by user
- Bar-graph: indicates the remaining capacity of the balance even after zero taring over the whole range
- Structure and base manufactured with structural steel oven painted
- Zinc plated mechanical parts
- Magnetic load cell of our production set on a levers system and protected against dust and also splash proof
- Levelling feet
- Stainless steel pan
- Stabilization time: 3-4 sec
- External power supply: 220 V - 15% / +10%, 50Hz
- Power consumption: 14VA
|
|
Chatillon has a long tradition of servicing commercial applications with "Legal For Trade" weighing scales. "Legal For Trade" are generally considered those scales intended for use in commercial applications where product is sold by weight. Commercial applications will generally come under the definition of the various weights and measures jurisdictions, NIST Handbook 44 and NIST Handbook 130. Each State's weights and measures jurisdiction have adopted Handbook 44, except in instances where an individual State has adopted a more specific language to define "commercial". Chatillon "Legal For Trade" scales are designed to be used in commercial applications and they meet all requirements of NIST Handbook 44 and applicable State and Local Weights and Measures requirements.
|
|
Substructure platform steel powder coated
Capacity display. An ascending bar graph displays the remaining available weighing range
High resolution readout with all verifiable models: readout d for 10 sec increased by 1 decimal place
40 Tare memory units, 40 Reference memory units (PCS), 20 memory units for weighing with tolerance ranges. Input in weight, pieces, %
Tare deduction numerical or from the memory unit
Piece counting with fixed reference quantities 1, 2, 5, 15, 20, 25, 30, 50, 100 pieces
Piece counting with variable reference, numerical or from the memory unit
Summing up of weight values and quantities
2 identification numbers, max. 40 digits each
Date/time
Information key for displaying individual user settings |
|
Combics - Weighing Platforms
…from 0.1 g to 3,000 kg, these are a whole new generation of rugged and flexible industrial scales.
• Accuracy 3,000e, 2 x 3,000e, class III; 15,000d, 30,000d
• 13 different sizes
• IP65 | IP68 | IP69K protection
• Finish: painted or various stainless steel grades
• Accessories include drive-on ramps, pit frames
• Stainless steel models can optionally be operated in Zones 2 and 22
Combics - Indicators
…high operating reliability; practical application programs; customizable printouts; additional, optionally retrofittable interfaces.
• Up to 9 application programs (e.g. counting, plus-minus checkweighing, …)
• Standard RS-232C interface port
• EC type-approval certificate; with suitable load cells, verifiable for legal metrology
• Analogue bar graph, color-coded LEDs
• Stainless steel models can be optionally used in Zones 2 and 22 |
|
Thanks to their flat, rugged and maintenance-friendly design, the DCV plattform scales are perfectly suitable für use in virtually any industry.
High-quality design (optionally electropolished, stainless stell up to grade V4A), easy cleaning (removable load plate) and a wide range of accessories qualify the scales for use in sophisticated applications, e.g. in the chemical and food industries. |
|
Chatillon has a long tradition of servicing commercial applications with "Legal For Trade" weighing scales. "Legal For Trade" are generally considered those scales intended for use in commercial applications where product is sold by weight. Commercial applications will generally come under the definition of the various weights and measures jurisdictions, NIST Handbook 44 and NIST Handbook 130. Each State's weights and measures jurisdiction have adopted Handbook 44, except in instances where an individual State has adopted a more specific language to define "commercial". Chatillon "Legal For Trade" scales are designed to be used in commercial applications and they meet all requirements of NIST Handbook 44 and applicable State and Local Weights and Measures requirements.
|
|
CM 50-C2 N only: Test weight included. Balance test software "BalanceCal Light" free downloadable on our website under "Software"
Hard case cover. Protection against pressure and dust, with integrated pocket calculator.
Ready for use. Batteries size AAA (2x 1.5 V) are included. AUTO-OFF function after 4 min without a change of load to preserve the batteries, disengageable. |
|
| These quality portable beam scales are designed specifically for industrial applications, warehouses and terminals. Ideal for heavy use applications. The HB-1000 is available with H44 Class III "Legal for Trade" for point of sale use subject to on-site verification by local Weights and Measures jurisdications. HB Series scales are constructed of heavy duty cast iron with corrosion resistant loops, bearings and nose irons. Wheels make the scale easy to move and relocate to accomodate alternative work sites. Beams are graduated on the front and rear with weight indicated at the center of the poise. |
|
|
|
Weighing, Scales
