|
|
These high accuracy professional scales are trusted for their absolute precision and long-lasting reliability. Widely used by hospitals, laboratories, universities and heath service organizations, they represent the "standard" for clinical applications. Scales are constructed of chrome-plated steel with a 13-inch glass covered double dial. Full capacity is reached in three pointer revolutions. Runners are indexed for each revolution. A zero adjust features allows zeroing of up to 10% capacity. Scales come standard with a machined stainless steel pinion and phosphor bronze rack combination for low friction performance even at elevated temperatures. Twin brass dashpots eliminate pointer oscillation. The large, easy-to-read dials features a knife edge pointer.
|
|
Beside the loss-in-weight-feeder with a continuous mass flow Gericke offers also batch feeders, with the following characteristics:
- Small quantities can be dosed (p.e. 100 g in a 20 kilo feeder).
- Interruption and continuation of the mass flow is easily possible.
- Only volumetric mass flow is possible.
|
|
Used for products with regular or irregular granulometry, like confectionery, pasta, vegetables, cut products, dried fruits, coffe, seeds, dried vegetables, etc.
IN A LINE
ELECTRONIC WEIGHING SYSTEM WITH 1 TO 4 HEADS IN A LINE.
In automatic versions to fit onto a bagger, or semiautomatic versions with a stand and working table.
FEATURES
Pneumatically actuated
Number of heads: one, two, three or four
Number of shakers: one, two, or three per lane.
CONTROL: Electronic with microprocessor. Data key-in using bagging machine keypad. Pre-dosage with fine-tuning with independent speeds, for the shakers and belt.
OPERATIONS:
Pre-bowl (accumulation to advance weighing). Automatic tare weight setting. Automatic weighing correction. Chute end management. Fine-tuning repetition. Memory for 20 different settings. Weight display on screen (built-in on Eva-260). Poss. vary discharge per cycle. Production statistics (totals). RS232 Professional printer output. Fast and tool-less bowl removal for cleaning.
|
|
MULTIBELT single- and multi-idler belt weighers
- continuous bulk solids measurement in belt conveyor suppliers systems
- feed rates: up to 20,000 t/h
- attainable accuracy: up to + 0.25 %
- also available in legal-for-trade version
- simple and quick assembly
MULTIBELT applications:
- throughput and consumption measurements in production plants
- balancing of supply and withdrawal
- load limit alarm
- batching in loading stations
- legal-for-trade weighing
- prefeeder control
|
|
European Conformity
Directive 89/392/CEE relative to Machines.
Directive 73/23/CEE relative Low Voltage Equipment.
Directive 89/336/CEE relative to Electro-Magnetic Compatibility.
Functions
Control of the variable speed weighing manufacturer of conveyor belt.
Management of the upstream accelerating supplier of conveyor (rate regulator).
Dynamic weight acquisition.
Classification in 2 to 5 weight grades.
Direct command of up to 4 dispatching or ejection systems.
Batch processing with: 2 digital references, batch statistics.
Average and running standard deviation.
Batch statistics printout: average, standard deviation, min., max., number of parcels, articles per weight grade, number and percentage.
Several operating modes: catch weigher, parcel stop for topping up, parcel stop for removal, sorter/grader with removal.
Application
The TLV sorting scale has been designed for all weighing applications,
in movement or at a halt, for automatically conveyed products:
catch weigher measurement,
tolerance checking during production,
weight grading,
command conformity check,
check of prepackaged articles.
The TLV%u2019s robust design, ease-of-use and options make it ideal for
numerous industrial applications. |
|
With highly precise, dynamic weighing systems, you can assure and optimize the specified weight of your products.
Our products are uniquely outstanding for their modular design, high performance conveying systems and easy maintenance.
• Wide range of designs and performance classes
• Modular construction for maximum flexibility
• Unsurpassed processing quality and reliability |
|
The HC-WD is the ideal solution in industrial sectors that have especially high hygiene and cleaning requirements. The unique and innovative construction along with the solid stainless steel design makes it perfectly suitable for installation in moist and wet environments as well as for intensive and frequently repeating cleaning cycles (e.g. with steam jets).
The optional cleaning program facilities safe and through cleaning while the machine is running including automatic logging in the machine's electronic logbook.
IFS compatible product monitoring
HACCP/LMHV/FDA conform design
Optimal cleanliness evaluation
Open under frame
Wash Down environments IP 69K |
|
OCS Check weighers is an internationally recognized partner for efficient checkweighers, catchweighers, as well as in-motion professional scales. The name is synonymous with high-quality, ultra fast solutions and outstanding service. Our products stand for 100% in-line control in your production. Regardless of which branch you belong to.
|
|
Technologies Supporting Consumer Safety and Security These next-generation check weighers support HACCP and GMP standards for excellent confidence, reliability and validation.
To assure both environment-friendliness and customer safety and security, they have all been certified in compliance with the ISO14001, OIML R-51, and European Type Approval.
1. A highly rigid structural design supports stable reliable weighing with a high accuracy of within 200 mg at high speeds of up to 400 pcs/minute.
The combination of a highly rigid structural design and Anritsu-original signal processing technologies permits high-speed and high-accuracy weighing (3ƒÐ: +/-0.2 g) with a 50% better response and 100% better rejection accuracy than previous Anritsu checkweighers.
Measurement of previously unsupported long products and incorporation into high-speed lines is now possible.
A multi-range function supports auto-switching of weight range and scale to match the products being weighed, thereby improving accuracy.
2. Operation errors are eliminated by the large, easy-to-use color LCD.
The large 10.4inch color TFT Professional lcd displays various information on a single familiar Windows GUI with touch panel and large popup menus for simple operability.
Operators can use the screen customize function to display only the items they need (when KW3001AF/KW3001AP built-in).
3. HACCP-compliant construction for easy cleaning and no accumulation of food residues, etc.
The simple open-frame structure makes cleaning easy.
Conveyor specifications removal and professional fitting uses an easy one-touch mechanism.
The SUS304 frame structure improves sanitation considerations.
|
|
Liebel Weighing System
The automatic and dynamic checkweigher can be operated in miscellaneous production environments. In addition to the characteristic use as checkweighers, they can be employed as well as trend control in order to optimize filling- and volume dosing systems. In the use of these feedback control systems the weighing system will enable an optimization in product usage through precise and dynamic weight filling. LIEBEL weighing systems offer a very interesting cost- / benefit- relationship.
- Special designs for the food industry with IP 65/66 protection
- Polished stainless steel housing for easy wet cleaning in highly hygienic production environments
- Free choice of system management languages
- Management of up to 150 article memory cells
- Easy-use and intuitive display with softkey controls
- Many options, special designs and output systems offer usage in a wide variety of industry settings
- Administration of captured data by integrated protocol professional printer and flash-card with Ethernet bus
- PC software for importing and organizing statistical data |
|
Liebel Weighing System with Return Belt for faulty Products
The automatic and dynamic checkweigher can be operated in miscellaneous production environments. In addition to the characteristic use as checkweighers, they can be employed as well as trend control in order to optimize filling- and volume dosing systems. In the use of these feedback control systems the weighing system will enable an optimization in product usage through precise and dynamic weight filling. LIEBEL weighing systems offer a very interesting cost- / benefit- relationship.
- Special designs for the food industry with IP 65/66 protection
- Polished stainless steel housing for easy wet cleaning in highly hygienic production environments
- Free choice of system management languages
- Management of up to 150 article memory cells
- Easy-use and intuitive display with softkey controls
- Many options, special designs and output systems offer usage in a wide variety of industry settings
- Administration of captured data by integrated protocol professional printer and flash-card with Ethernet bus
- PC software for importing and organizing statistical data |
|
Multi-Lane Weighing System - interesting for you?
Often products have to weighed in a multi-lane environment. What to do? Measure all products in a line, separate all products into one lane? Not necessary with the new LWS 1400 ML, which measures up to 12 lanes separately - and will separate underweight products, also by line!
Please contact us to find out more about the possibilities at your site. Have a look at the fotos. The system is very compact runs very effectively in bakeries, meat production and in the non-food sector. This machine generally has a high RoI, as underweight products can be separated out by single piece. You can measure each product and sort out every product. This saves product and increases quality! |
|
GARVENS dynamic weighing solutions offer intuitive operator interfaces making setting quick and simple reducing downtime during product change-overs and maximising line efficiency. Compliant with regulations such as IFS and HACCP, GARVENS check weighers offer advanced statistical reports and data security.
Offering wash-down designs up to IP69K and optional integrated metal detection, GARVENS checkweighers and checkweighing solutions are enhanced by a world-wide after-sales service network. |
|
GARVENS dynamic weighing solutions offer intuitive operator interfaces making setting quick and simple reducing downtime during product change-overs and maximising line efficiency. Compliant with regulations such as IFS and HACCP, GARVENS checkweighers offer advanced statistical reports and data security.
Offering wash-down designs up to IP69K and optional integrated metal detection, GARVENS checkweighers and checkweighing solutions are enhanced by a world-wide after-sales service network. |
|
GARVENS dynamic weighing solutions offer intuitive operator interfaces making setting quick and simple reducing downtime during product change-overs and maximising line efficiency. Compliant with regulations such as IFS and HACCP, GARVENS checkweighers offer advanced statistical reports and data security.
Offering wash-down designs up to IP69K and optional integrated metal detection, GARVENS checkweighers and checkweighing solutions are enhanced by a world-wide after-sales service network. |
|
GARVENS dynamic weighing solutions offer intuitive operator interfaces making setting quick and simple reducing downtime during product change-overs and maximising line efficiency. Compliant with regulations such as IFS and HACCP, GARVENS checkweighers offer advanced statistical reports and data security.
Offering wash-down designs up to IP69K and optional integrated metal detection, GARVENS checkweighers and checkweighing solutions are enhanced by a world-wide after-sales service network. |
|
GARVENS dynamic weighing solutions offer intuitive operator interfaces making setting quick and simple reducing downtime during product change-overs and maximising line efficiency. Compliant with regulations such as IFS and HACCP, GARVENS check weighers offer advanced statistical reports and data security.
Offering wash-down designs up to IP69K and optional integrated metal detection, GARVENS checkweighers and checkweighing solutions are enhanced by a world-wide after-sales service network. |
|
| Setra is please to announce the latest addition to our fine line of industrial balances. The Check weigher offers the same range of capacities as well as many of the valuable benefits of our counting scales including custom professional label generation, control of accuracy, and bar coding capabilities. |
|
| Varpe, as self-manufacturer, adapts his equipments to the needs of each client, offering tailor-made solutions that adjust to the lines and to the production processes of your industry. |
|
| Varpe, as self-manufacturer, adapts his equipments to the needs of each client, offering tailor-made solutions that adjust to the lines and to the production processes of your industry. |
|
| The HC-IS is for weighing tall and small products, which pitch to topple over easily. Therefore a typical application area is the dynamic in-line weight control of aerosols. According to the application this machine type is optionally available as ATEX compliant version which is applicable in explosive zones 1 and 2 (II 2 G IIB T4). |
|
| Specially the pharmaceutical and cosmetic industry uses the check weighing HC-MI for 100% in-motion checkweighing of small products (e.g. bottles filled with tablets). The HC-MI is the dedicated solution for the precise dynamic weighing with mg-resolution and has a throughput of up to 250 ppm. The product distance is created by a time screw thus the safe product handling is granted. |
|
Special professional scales of control for moulds
Scales of control with regulation of the tendency
The scales of control are adapted to the continuous assessment of the weight of products in moulds. The moulds can be various types, for example moulds with wholewheat breads or cakes. The system optimizes the average value of the product by automatic adjustment of the dispenser of paste by means of a regulation of the tendency.
The system of weighing tares/gross, available in option, measures the net net weight thanks to preliminary weighing and with the memorizing of the weight of the empty moulds. The fact that the empty moulds of the production often have a different weight is taken into account, the value of the tare is thus constantly variable. Once the filling of paste carried out, the net net weight of filling is available thanks to the memorizing of the weight of the empty mould.
Very precise values can thus be provided to the installation to control the filling in paste. The abnormal value due to weights different of tare of the empty moulds is eliminated and does not need to be taken into account.
The scales were developed for a continuous dynamic weighing during the process of production. It is conceived for severe conditions of use in manufacture of food products, without any concession as regards measuring accuracy. Thanks to the concept tares/gross, the trend impulses transmitted to the filling systems are definitely more precise than with traditional scales. The scales of control are entirely out of stainless steel and are thus with the height of the highest requirements as regards quality of treatment. |
|
|
|
Weighing, Scales
