|
|
|
Introducing the classic countersinks + patented RotoDrive Crancked Countersinks. Allows the user to chamfer holes, deep holes and continuous rotation for fast and accurate chamfering.
|
|
Hand Socket Adaptor 1/2" 3/4" Dr.
1. Extra Long arm . 18" 24"
Torque be big, when the power wrench is not available
our socket adaptor will help you get high torque
2 Ratchet high torque in all direction
easy to operate the socket.
3 Flexible easy your working
Eg. good for lady to have this socket adaptor in her car.
when she need to change the car wheel by herself
|
|
Clinch studs are inserted through pre-pierced sheets into clinch dies. Initially the hole in the sheet is widened by the calibrating collar. After that, the clinch stud is precentred by means of the calibrating collar. Finally, the sheet material is forced into the annular groove and the Torx locking feature is pressed in. A very high loadcarrying capacity is achieved by means of the patented underhead geometry.
The reduction of production stages and of energy consumption results in considerable cost savings. An additional advantage is the possibility of processing several clinch studs in a single stage.
|
|
The tooling can be used with nearly all tool and press systems. Standardised components are used normally. This allows very rapid individual setting up of punch blocks and dies. The simple and intelligent construction guarantees reliable function of all system components. Due to the variable options of feeding techniques this system is suitable for small-batch and large-series facilities.
The versatility of applications, the profitableness, and the efficiency of the processing method, as well as the multitude of adcantages compared with traditional joining techniques make more and more users all over the world to rely on this unique system.
|
|
lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations
We take pride in creating products that provide long life under the harsh applications of industrial usage
|
|
Slip Joint Pliers 6", 8", 10"
Locking Pliers 6", 7", 10"
Long Reach Pliers 11-1/2"
Diagonal Plier 5" to 7"
Ring Pliers
Misc Pliers
|
|
Combination Pliers
- General purpose pliers for gripping and holding, as well as cutting, soft and hard wires and cables
- Long cutting edges, additionally inductively hardened
High Leverage Combination Pliers
- Power-assisted general purpose pliers for gripping and holding, as well as cutting, wires and cables ranging in hardness from soft to extremely hard
- Long cutting edges, additionally inductively hardened
- Less force required thanks to leverage properties
Needle Nose Pliers (Snip Nose Pliers)
- Gripping and holding, as well as cutting, soft and hard wires and cables, preferably in mechanical and electrical applications
- Pointed, half-round tips with serrated gripping surfaces, capable of withstanding high stresses
- Long cutting edges, additionally inductively hardened
|
|
Trim your production process: FIPA has the complete air nipper program.
From rather sensitive to pretty strong!
Manually operated: 8 sizes, Ø 23 mm – Ø 75 mm for plastic sprues up to Ø 12 mm.
Automation: 7 sizes with round or square cross section, cutting force up to 4700 N.
|
|
The PNEUMATIC SPRUE CUTTERS serve to cut the sprue from the piece.
The body is in aluminium alloy, whereas the blades, ordered
separately, are in special high strength steel.
The sprue cutters have a one-way type function.
|
|
SEALS use special treament material for the blade, just for copper wire, iron wire, plastic, connector,wire locker, etc. There are six series with thirty models for variety of chooese.
SEALS use aluminum material for the body with the advantages of light and convenience. Meanwhile,we adapt the volume adjuster for moderate operation power.
It is easy to replace the blade.
|
|
|
Power cutters have simplyfied cutting and pressing in mass production. Versatile applications of the power cutter by selection of suitable blades, make it possible to increase production. The working pressure is 4-5 bar.
|
|
ProHold® Tip Screw Holding Technology Bondhus is the developer and exclusive manufacturer of patented ProHold® tip tools - the best screw holding technology available.
- Holds screws tight on the tool every time
- Available for both hex and star tools
- Bondhus is the only manufacturer making screw holding tools in sizes as small as .050" and 1.27mm
- Smooth tool rotation is preserved
- Does not reduce the strength of the tool or cause damage to the screw head
- Non-magnetic
- Never drop a screw again
- Available in a full range of Hex and Star sizes: .050" to 3/8", 1.27mm to 10mm, and T9 to T60
|
|
Screwdriver Sets
Bits & Bit Sets
Hex Keys & Hex Key Sets
Insulated Tool Sets
Nut Drivers & Nut Driver Sets
Screw Starters
Screw & Hex Accessories
Screwdrivers
|
|
A Real Multi-tasker and Ideal for Precision Work.
- The flexible, versatile precision reversible-blade system
- With colour-coded, telescopic blades
The Compact Allrounder.
- Flexible, versatile reversible-blade system in industrial quality
- With colour-coded, telescopic blades
|
|
The screwdriver handle requires little introduction, since anyone who has ever used a tool, is probably familiar with this handle style already. Like many things, however, the screwdriver handle has recently evolved into a more ergonomic and useful design than anything that existed in the past.
Screwdriver Considerations:
A good choice when low to medium torque is required or the blade is smaller than 3/16 inches.
Protects against blade breakage better than any other handle type.
Allows fast insertion and removal.
Allows spinning with the fingertips.
Reaches areas too restricted for operating a T-Handle.
The utility of the screwdriver handle is greatly extended when mated with a ball end tip.
Bondhus® Advantages:
The handle core is molded from durable plastic, and designed to last a lifetime.
The ergonomic design has a comfortable feel in the hand, even after long periods of use.
A slightly cushioned feel helps to prevent fatigue and improve grip.
Handle and blade torque are matched, to prevent breaking the tip.
Bondhus® screwdriver handles, up to 3/16", can generate a screws full recommended seating torque.
The subtle texture covering the handle provides good grip, even when hands are wet or oily.
Bondhus® handles will not roll off an inclined or vibrating surface.
Protanium® Steel
ProGuard™ dry finish
|
|
The screwdriver handle requires little introduction, since anyone who has ever used a tool, is probably familiar with this handle style already. Like many things, however, the screwdriver handle has recently evolved into a more ergonomic and useful design than anything that existed in the past.
Screwdriver Considerations:
A good choice when low to medium torque is required or the blade is smaller than 3/16 inches.
Protects against blade breakage better than any other handle type.
Allows fast insertion and removal.
Allows spinning with the fingertips.
Reaches areas too restricted for operating a T-Handle.
The utility of the screwdriver handle is greatly extended when mated with a ball end tip.
Bondhus® Advantages:
The handle core is molded from durable plastic, and designed to last a lifetime.
The ergonomic design has a comfortable feel in the hand, even after long periods of use.
A slightly cushioned feel helps to prevent fatigue and improve grip.
Handle and blade torque are matched, to prevent breaking the tip.
Bondhus® screwdriver handles, up to 3/16", can generate a screws full recommended seating torque.
The subtle texture covering the handle provides good grip, even when hands are wet or oily.
Bondhus® handles will not roll off an inclined or vibrating surface.
Protanium® Steel
ProGuard™ dry finish
|
|
MECHANICAL, HYDRAULIC & HYDRAULIC SELF-CENTERING PULLERS
Capacity 5 Tons to 60 Tons, Two/Three Arms, Reach 225mm to 727mm, Spread 60mm to 920mm in various models, Full Hydraulic Puller Sets, Master Pullet Sets, Grip Pullers sets also available
|
|
T-Handle Considerations:
The T-Handle is the best selection for applications where maximum torque is needed for insertion/extraction of screws.
Compared to a screwdriver handle, less effort is needed to generate comparable torque.
The T-Handle is capable of producing a flywheel affect for 'spinning' fasteners in or out of low friction materials.
A common misconception is that a shorter blade can generate more torque than a longer blade. In reality, blade length has no affect on torque.
Bondhus® Advantages:
The slight downward angle of the handles is ergonomically superior to a straight T-Handle for comfort and functionality.
Cushioned feel reduces fatigue.
Handle size matches blade torque to prevent over-torqueing.
The mass of a Bondhus® T-Handle enables a flywheel affect, allowing screws to be quickly spun in or out.
Bondhus® T-Handles do not have ball end tips on blades that are smaller than 5/32 inches or 4MM, since a T-Handle could easily over-torque and break these smaller size ball ends.
6", 9", and graduated blade lengths are available.
Bondhus® T-Handles are securely welded to guarantee they will never loosen or slip. Handles that are friction fit, but not welded, eventually begin to wear and loosen. When the wear becomes excessive, the blade falls out of the handle.
Custom lengths are available on special order.
Protanium® Steel
ProGuard™ dry finish
|
|
The EasyPull, TMMA 8E, combines the user friendliness and safety of the mechanical EasyPull with the effortless force generation by an integrated hydraulic spindle. The TMMA 8E has a maximum withdrawal force of 80 kN (8 tons imp). The puller is protected from overload by a safety valve built in the hydraulic spindle.
- Ready-to-use, integrated hydraulic cylinder, pump and puller - separate hydraulic spindle and pump are not required
- The unique red rings spring-operated opening mechanism allows the puller to be placed behind the component with one movement of the hands
- Self-locking arms facilitate firm grip behind the component, minimising the risk of the puller slipping while under load
- The long stroke of 80 mm (3.1 in) facilitates dismounting in one operation
- Safety valve prevents spindle and thereby puller overload if excessive force is applied
- The spring-loaded centre point on the hydraulic spindle allows easy centring of the puller on the shaft without damaging it
- For dismounting jobs requiring less force, SKF offers a 50 kN (5 tons imperial) version; Hydraulic EasyPull TMMA 5E with a maximum stroke of 75 mm (3 in).
|
|
|
The hydraulic FAG extractors PowerPull SPIDER are used where higher extraction forces are required. The ten extractor sizes have a range of extraction forces from 40 to 400 kN, covering very wide range of possible applications. These devices allow rolling bearings, gears, sleeves and many other shrink fitted parts to be quickly and easily dismounted. In addition, the low mass of the extractors allows for use in any position. If necessary, greater grip depth can be achieved through the use of extra long extraction arms (available as accessories). For protection of operators, the extractors SPIDER40 to 80 have a safety grid. All larger hydraulic extractors are supplied with a transparent, very tough safety cover. The cover can be easily placed around the workpiece or tool and secured using velcro strips.
|
|
|
PFERD was established in 1799 by manufacturing files for farriers. Today PFERD-brand files, known for top quality and consistency, are used on every continent. With a wide range of standard and specialty products, PFERD provides solutions for your filing needs.
|
|
Wrench Sets
Adjustable Wrenches
Box Wrenches
Combination Wrenches
Crowfoot Wrenches
Industrial Wrenches
Offset Slugging Wrenches
Offset Striking Wrenches
Open End Wrenches
Pipe Wrenches
Specialty Tools & Sets
Spline Double Box Wrenches
|
|
| ... products without technical information |
| |
|
|
Hand tools: Pliers, Wrenches ...
