|
|
UK 290
The first mobile professional saw with the functions and advantages of a crosscut and mitre saw, a flush-mounted circular saw and a table saw
Three machines in one – mitre saw, flush-mounted logging saw and table saw
Can be expanded into a system circular saw
Mobile due to low weight
Motor with overload protection and soft start technology
High quality, swivelling universal guide adjustable on all sides of the machine table for mitre and parallel cutting
Infinitely swivel and height adjustable saw blade
Integrated, foldable stand with level adjustment for safety
Precise workpiece support made of aluminium profiles
Side part made of solid steel sheet
For single phase alternating current
|
|
Varispeed type P (PNEUMATIC) is a highly professional fret-saw, versately, and excellent precision cutting.
The PNEUMATIC CONTROL of slope and down stroke of the upper clamp, consent to obtain a fast fixing of the blade and reduction in working times.
Varispeed is particularly suitable for fine inlay work, handcraft work, and marquetry, it can satisfay the numerous straight or finely shaper angle fretwork.
The elevation of the blade respect the working table is basic for cutting out the flet dies in the paper and cardboard industry.
ON REQUEST:
Varispeed can be supplied with THE AUTOMATIC COUPLING OF THE BLADE into the lower clamp, with an ELECTRONIC SPEED VARIATOR manual operated or by PEDAL POTENTIOMETER.
The large and strong working top, allows a millimetre TILTING INCLINATION UP TO 45°. |
|
| Abrasive cut-off saws, 7" -30" diameter blades, dry cut and Wet cut available, special design machines also available. Please contact factory for pricing. |
|
The C300 Series cut-off machines originate from the technological development of the C250 Series. In addition to the basic features which are common to both Series, the two C300 models can accomodate cutting wheels up to 300mm diameter, and have a more powerful and sophisticated motor, controlled by a frequency inverter. The main function of the frequency inverter is to electronically control the motor power variations during the sample cutting process, improving the performances. Moreover, the inverter acts as a motor brake in case of power failure (caused, for example, by the safety switch that immediately interrupts the power supply in case the cover is open while the machine is working), allowing the complete stop of the motor in a shorter time than a machine not equipped with the inverter.
The difference between the two models of the C300 Series is the variable speed device, which is available only on the C300VS cut-off machine. |
|
SUPER TECHNICS 350
Manual circular saw, robust, fast and precise cutting of metal profiles and solid materials: for professional use in maintenance workshops and low duty production.
Optional sawdisc diam.350 mm.
Two ways miter (from 0° to 45°) and longitudinal cutting.
Three cutting speeds.
Quick lock vice with anti-burr clamping.
Mobile countervice.
Sawdisc breakage protection with safety clutch. |
|
The Lynx LCS14 Cut-Off Saw is used for fast cutting of concrete, masonry, pipe, structural steel beams ang guardrail. Lynx LCS14 features are:
- 7-9 gpm (26-34 lpm) operating range.
- 14 inch abrasive or diamond segment (wet or dry) blades.
- Available in clockwise or counter clockwise rotation models.
- Internal flow control to prevent over-speeding.
- Internal blade brake.
- HTMA quick disconnect couplers included on all models.
- Adjustable blade guard.
- Optional Saw cart.
|
|
Manual bandsawing machines, designed to cut sections and solids materials from 45° right up to 60° left.
|
|
ZIP 30
Manual band sawing machine for solid and metal profiles.
Also steel, stainless steel, brass, aluminium, copper.
Robust, versatile and handy, for artisan metal works and professional duty.
One way miter cutting (from 0° to 60°)
Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability.
Precision blade-guide with hard metal pads, bearinga and anti-corrosion treatment.
Two cutting speeds.
Vice with quick lock lever. |
|
Type SC 178VSHE
Motor 1HP
Voltage 1x230V
Blade speeds 21/23/44/58 m./min.
Sawing rounds 0° - 178mm
45° - 305mm
Sawing squares0° - 178x305mm
45° - 115x180mm
Saw blade 2362x19,05x0,8
Swivel 45°
Weight 150kgs |
|
Manual sawing machines using an HSS circular blade to cut metal solids and sections up to 120 mm diameter from 45° SX to 45°DX
|
|
250 mm (10") H.S.S. sawblade
cuts steel, stainless steel, nonferrous metals
head miters 0°- 45°
vise opens 105 mm (4.1")
pull-out coolant tank
2-piece safety guard |
|
Oil-bath lubricated gear
Safety clutch prevents gear or blade breakage if an overload occurs (exception KKS 250)
Integrated coolant tank
Head swivels 45° to the left and to the right
KKS 250 / 315 - base included |
|
Structure
- Heavy-duty hydraulic cylinder with precision ground hinge
support
- Cast iron quick set up vise
- Pan shaped base with built-in coolant & hydraulic system
Blade Drive
- 2 hp motor, heavy-duty reducer, & variable step drive assembly
- 4-speed transmission with the best worm gear and shaft
Blade Guidance & Lubrication System
- Carbide blade guides with roller bearings
- Two addtional bearings to support blade from the top
- Integral coolant system
- Blade brush
Control & Automation
- Down feed rate & cutting pressure control via hydraulic
down feed valve
- Simplified control switches mounted on saw head
Material Feeding & Clamping
- Cast iron vises
- Secure clamping via dependable manual lead screw system
- Anti-slip hand wheel
Safety
- Conduits protection measure
- Orange alert safety design
Standard Accessories
- Easy blade change with front access at waist level
- Bi-metal saw blade
- Tool box, leveling pads, and an additional wire brush
- Operation & parts manual |
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range. |
|
KM10 10" abrasive mitre saw
Angles for 0 to 45 degrees - left or right.
Positive index holes - up and down stops.
Two cam-lock vises - lever-lock for table.
Spindle speed 3450 rpm, 5/8" arbor
Capacities: 1 1/2" solids, 2 1/2" shapes @ 45 degrees.
Dimensions: L 25" x W 24" x H 17"
1 PH or 3 PH (Specify)
220 lbs.
Options:
WS10 workstop
12M steel stand
Model:
KM10-1 1 phase/220 volt
KM10-3 3 phase 220/440 volt
Other products available :
|
|
For Cutting Steel, Stainless Steel and Nonferrous Tubes and Profiles
With HSS Sawblades 225 x 32 mm (9")
Head Miters Through 0°- 45°- 60° Degrees
Strong Vise, Opens 102 mm (4")
Low Consumption Oil Lubrication
Cast Aluminum Guards
Worm & Wheel Drive
1-ph. or 3-ph. Drive
Cast Iron Base |
|
KGS 303 Plus
For all cutting tasks, ideal for interiors
For cutting wood, coated panels and plastics
Simple cutting of all angular, bevel and rafter cuts
Powerful, maintenance-free universal motor
Turntable with precise angle adjustment
Die-cast aluminium work bench
Suitable for right-handed and left-handed operators
Cutting width increased to 300 mm
Saw head can be tilted by up to 48° on both sides
Multi-supported draw gear
High guide profiles that can be moved at the side, for the improved fixing of the workpiece
Standard-equipped with a flange laser
Integrated cutting depth control
Transport lock
Extensive range of accessories
|
|
2300 Watt Metal Chop Saw CS 23-355
For single phase alternating current
Especially suitable for the fast, precise cutting of steel, non-ferrous metals, iron and cast profile
Motor and gear with ball bearing and designed for high loads
Spindle lock for easy disc change
Quick clamping device with variable mitre conversion up to 45° on both sides
Easy to transport due to built-in handle and locking device
Swivelling blade guard
Adjustable spark guide plate
Bottom access guard
Adjustable depth guide |
|
HSM14 14" semi-auto Aluminum saw
14" high speed mitre saw for cutting ALUMINUM and other non-ferrous material with steel blade.
5HP, 3ph, 3450rpm motor.
4400 spindle speed. 1" spindle arbor
Power down feed. Air over oil 0-12 FPM. Semi-automatic
Double v-belt drive. Cast iron contruction!
Double air vises, OSHA safety blade guard.
Mitres left and right to 45deg.
Vise opens to 6"
Capacities: 4-1/2" pipe and square.
Dimensions: 30"L x 48"W x 60"H MADE IN USA !!
750 lbs.
Model: HSM-14 5 hp, 3 ph, 220/440 volt ( specify voltage)
Other products available:
|
|
PH 101
Small portable bandsawing machine for hobbyists and fitters to cut at 0° up to 45° left.
Model is realized completely in aluminium die casting and is available single-phase.
A FEW FEATURES:
- Brush motor 1500 W with electronic speed variator.
- Transmission is given by double coupling of casehardened steel gears with helical teeth.
- Head swivels and is locked by means of a screw for mitre cutting.
- Control handle with microswitch and safety switch to start or stop blade motion.
- Adjustable front band guide so as to position it according to the dimensions of the material which is being cut.
- Bi-metal band.
- Adjustable stop to make cuts of the same length.
- Instructions manual for maintenance and spare parts list.
|
|
WAL-ZER 1 AND WAL-ZER 2
Portable bandsaws, very easy to carry, offer a wide cyìutting range to suit your application (steel, aluminium, brass, teflon, PVC etc.)
Ideal for the electrician, blacksmith, thinker, plumber, ect.
Fast sawing speeds and economical cost-per-cut. |
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range. |
|
| ... products without technical information |
| |
|
|
Manual cut off saws, Manual miter saws
