|
|
1099XPA - 1/2" square drive Ratchet
- 103 Nm max torque
- variable speed button
- 360° adjustable exhaust
- heat-treated ratchet housings
- available with 3/8" square drive (109XPA model) |
|
Yokota ratchet wrenches are used where accurate torque is required while the accessibility is limited.
Choose the right size impact socket for your ratchet wrench. If the sockets do not fit exactly this may cause a loss of power and wear of the anvil. For
detailed information about the impact sockets we refer to the special chapter Action impact sockets. Extension bars, universal joints and adaptors are also available. |
|
Get it together fast and accurately with Atlas Copco assembly tools
Ergonomically designed screwdrivers, pulse tools, nutrunners and impact wrenches from Atlas Copco are light and comfortable to hold. Correct grip diameters reduce reaction forces, noise and vibration levels are low, power-to-weight ratios are high. Optional built-in monitoring and control of torque and angle in the nutrunner range allows a wide variety of tightening strategies. |
|
The LÖSOMAT high torque pneumatic wrench works quietly and is robust, with its rotary drive motor. An air control unit supplies constant air pressure.
Main application areas:
Power plants, transport industry, chemical industry, plastics industry, cable cars and lifts, mining, tunnel construction, shipyards, oil and gas industry and cement industry |
|
Screwdrivers are available with various impact mechanisms. Each application has it’s own mechanism. Therefore please take note of the
information below before purchasing a tool.
1-Hammer
The 1-hammer system makes 1 impact per rotation at 1 side of the anvil. This causes a higher energy per blow. The screwdrivers with the 1-hammer system are especially suitable for wood and steel screws.
2-Hammer
The 2-hammer system makes 2 impacts per rotation at both sides of the anvil. This mechanism is used for wood and steel screws and works more quiet than the 1-hammer system.
Direct drive
These direct drive screwdrivers are suitable for selftapping screws and wood screws.
Clutch mechanism
Screwdrivers with a clutch type mechanism are used for standard applications with normal joints. The mechanism works by means of
spring pressure. When reaching the torque the mechanism slips.
Shut-off mechanism
To comply with the ever increasing demands for screwdriving accuracy and work safety, we present a new range of pneumatic screwdrivers with a maximum torque repeatability. Along with the exceptional torque accuracy, the new Jointech Plus 2 torque control system has automatic high speed air shut off to allow for a considerable reduction of the reaction to the operator's hand. |
|
Joining components in today's industrial environment is much more than putting wrench to bolt. It's about finding a solution that links the operator and the joint and delivers unparalleled accuracy and repeatability. Ingersoll Rand has a superior knowledge of the threaded fastening process, acquired through years of application work with the world's leading manufacturers in the motor vehicle, aerospace, appliance, and electronics industries. We understand the interface of the tool and operator - and know how to leverage the power of ergonomically-designed equipment to maximize productivity.
Beyond just product, Ingersoll Rand's extensive capabilities help you before, during, and after your line or work area is configured for production. Presented here is Ingersoll Rand's portfolio of products and services specifically tailored to the modern assembly environment. Whether your business is assembling motor vehicles, automotive components, aircraft systems, appliances, office furniture, or consumer electronics, there is solution from Ingersoll Rand that will meet your needs and exceed your expectations.
|
|
Features and Benefits:
- Combines the power of impact and hand torque wrenches in one tool.
- Multiplier increases speed and productivity, as well as accuracy.
- Interchangeable multiplier sets: 800, 1800, 3000 and 4500 ft/lbs. |
|
PNEUMATIC TORQUE WRENCHES
Square drive ¾ Inch to 1-1/2 Inch, Adjustable torque range from 165Nm to 11200Nm, 120lb.ft. to 8260lb.ft., input air pressure 2 to 7bar, with heavy duty planetary gear box, with reverse-forward drive for loosening and tightening, having idle speed from 1 to 48 rpm, suitable for use in highly explosion risk areas.
|
|
Norbar manufacture an extensive range of high quality torque wrenches to cover torque values from 1 N.m to 1500 N.m. They are designed and manufactured to exceed international standards for accuracy.
In addition to the normal 'adjustable' torque wrenches, Norbar offer Production 'P' Type versions which can be pre-set and dedicated to a particular application. This setting system is designed to discourage unauthorised alteration.
All Norbar torque wrenches are offered as standard with a quality ratchet. For applications where interchangeable end fittings are required, 'Torque Handles' are also available in various models up to 550 N.m. |
|
TorcUP Industrial Bolting Tools introduces the RAPTOR Series on industrial pneumatic torque wrenches. The new line provides continous and repeatable torque with an accuracy of +/- 5%. Unlike previous pneumatic torque wrenches, the RAPTOR series has the fastest speed when it counts, which is during actual torque and not during free nut run down! Inherent in all RAPTOR models is a Patented gear technology which creates greater durability, lower operational temperatures and increase efficiency. The RAPTOR series ranges in torque from 120 Ft/Lbs to 3,000Ft/Lbs and Free Speeds of up to 45 RPM.
The RAPTOR is a tool designed to exert torque on a fastener to achieve proper tightening or loosening of a connection through the use of pneumatics. A torque wrench is applied to the nut either directly or in conjunction with an impact socket. Pneumatic torque wrenches apply a predetermined, controlled amount of torque to a properly lubricated fastener.
TorcUP Inc. Raptor Series Features
*Square Drive
Direct Socket Engagement.
Available in 3/4", 1" or 1 1/12" Square Drives.
* Pistol Grip Control
Firm Pistol Grip Control.
*Reaction Member
Sturdy "Non-Welded" Construction.
*Air Drive
Constant Speed Rotation.
*Internal Gear Drive
Patented Planetary Design.
*Operation Trigger
Feather Controlled Forward/Reverse. |
|
QA 4 / QA 6 / QA 8
Precision Air Nutrunners
High precision shut off clutch
for consistent repeatability and process quality
Adjustable shutoff clutch provides repeatability that improves joint quality
Quick, precise clutch shutoff limits torque scatter and reaction to the operator
ISO 5393 tested
Cycle counting capability enables integration into process control systems for QA4 and Remote tools.
Clutch tested to over 1 million cycles without failure
Proven components from our world-class line of DC electric tools
2 Year Warranty on clutch and angle heads
Three powerful motor options to match your torque and speed requirements
Adjustable Shutoff Clutch or Stall
Multiple drive sizes, spindle lengths, and floats
Single or Multi-spindle fixtured systems to increase productivity and improve joint quality
Run with Lube or Lube free |
|
QC Qualifier
Counting capabilities for Air Tools
Basics of operation
The QC Qualifier is designed to assist in error-proofing, batch and cycle time counting, and process flow control for the installation of threaded fasteners. The QC Qualifier is an error proofreading system and does not provide torque control or torque monitoring.
The QC100 is designed for non shut-off tools. Its solenoid valve allows to shut-off the air when the cycle is complete, thus providing shut-off control with a non shut-off tool. It can also be used with a QXLH air hose with indicator light to signal the operator when to stop by releasing the throttle.
The QC200 is used for error proofing with shut-off tools. Torque accuracy is dependent upon the capability of the selected pneumatic tool for the application. |
|
ADJUSTABLE “CLICK TYPE” TORQUE WRENCHES
Ratcheting and Non Ratcheting head models with torque range from 2 - 2000 Ft. Lbs., 0.3 - 275 Kgf. mts. and 3 - 2700 Nm. Repair and Re-calibration Facilities available;
|
|
Torque Tools
Dial Torque Wrenches
Electronic Torque Meter
Micrometer Torque Wrenches
Torque Multipliers
Torque Accessories
3/4" Drive 60-300 Foot Pound Ratchet Head Micrometer Torque Wrench
(J6018AB )
Length 32"
Weight 14 lbs
Drive Size 3/4"
Head Depth 2-1/16"
Head Length 2-5/8"
Increments (ft/lb) 2 ft. lb.
Torque Range (ft/lb) 60 - 300
45 tooth gear/floating pawl design for small 6.8"arc swing
13% smaller head for access in tight work areas
Reversing lever designed for quick, one handed operation
10-80 ft/lb thru 140-700 ft/lb
21-116 Nm thru 217-976 Nm
Packaged in blow molded plastic box for protection and easy storage
Calibrated ~2% one direction available upon request
|
|
| Handheld tightening tools of the DSH series are especially designed for the hand-operated use. The power spectrum here is from 2 Nm up to 40 Nm, without mechanical support of the tightening tools. Further torques are possible at any time on inquiry. |
|
Our bit exceed DIN / ISO standard, it is good to use in industrial area. Our brand is GFB. The packing can be card packing, bulk packing and your design. Special bits are very well come, please supply your samples or drawing.
Features:
. Good quality, exceed DIN / ISO standard.
. Our registered brand GFB.
. Accept all special bit holder, nutsetter and screwdriver bits.
. Welcome sample purchase. |
|
Bondhus® accessories extend the usefulness of our tools. In addition, custom manufactured products and hex stock are also available.
Bondhex™ cases provide a convenient means of keeping hex keyss neat and organized. Sizes are printed on the case and allow identification at a glance. Cases are color coded yellow for inch, red for metric, and green for Star tools.
Hex-Tenders provide that extra reach when needed. Simply couple two like sized tools together. Inch and metric are both available in a range of sizes. |
|
Torx is wide use in many aera. since the torque is higher than ordinany type
We can make screw driver bit from T1 to T100 for industry use
different shank are acceptable
Our brand is GFB |
|
GFB Bits exceed DIN standard
NOVUMTEC is specifically making high quality wide range bits and accessories for all kind of ScrewDrivers, Power tools, Machines, Tools.
"GFB" bits at Taiwan price, meet DIN Standard, match any screw heads perfectly is long life bits. |
|
When assembly time is critical, power bits and blades are the answer. They save time and reduce labor costs.
Bits that are used for industrial production are subject to the extreme conditions of constant usage. All Bondhus® bits are made of Protanium® Steel, and are the hardest, strongest, and most durable professional bits available.
Bondhus® bits and blades are manufactured in a wide range of sizes and lengths.
Insert bits:
- Ball end insert bits are designed for power tools having 1/4" hex adapters.
- Ideal when assembly time is critical.
- Bits are 1" (25MM) long.
Power bits:
- Ball end power bits are designed for power tools having 1/4" hex adapters.
- Save time and increase productivity.
- Bits are 3" (76MM) long.
Ball end blades:
- Ball end blades can be used in a variety of handle types.
- Use directly in socket wrenches and power tools.
- Lengths of 3.4" (86MM) to 12" (305MM). |
|
- precision tools for heavy-duty use, manufactored from long-lasting steels
- flexible manufactoring facilities for fast and economic production of customized series
- superior hardness and torque, exceeding DIN and ISO requirements
- comprehensive range
- cold forged PZ-tips for extra precision and durability
- clearly defined quality standards and complete documentation by our ISO 9001 and QS 9000 certified QM-system |
|
Lock your bits firmly
Our holder is precision made that is meet DIN standard non Magnetic or strong magnetic. Your design are very welcome, we have very strong developing department price competitive.
Features:
. Precision made.
. Strong magnetic.
. Sample purchase. |
|
IMPACT SOCKETS
Extra Heavy Duty, Single / Double Hex, Standard / Deep Length, for impact / heavy duty manual application, Square Drive sizes from 1/4 Inch to 2.1/2 Inch, A/F sizes from 6mm to 160mm, available in SAE sizes as well, made from Chrome vanadium (EN-47) Alloy Steel with Rust Resistant Black Industrial Finish.
|
|
|
|
Screwing tools
