|
|
| Products 91 to 120 of 138 |
Action
If you work with impact wrenches we advise you to use the right impact socket with your specific tool in order to achieve the best result and the highest safety during the job. Also extension bars, Adapters and universal joints are available.
Surface Drive Sockets are used in places where fast assembling is required. The easy and fast fitting of the socket on the bolt makes it possible to put the socket on the bolt with a running tool and to make the joint.
Sleeve Drive Sockets have been developed by Action at the request of Yokota to improve the quality of a joint tightening with impulse wrenches. Sleeve Drive Sockets minimize play between socket and tool thus reducing “wobble” and stabilizing the torque setting. The use of Sleeve Drive Sockets is not only of benefit to the actual joint but also reduces vibration to the tool and operator, also reducing noise levels and tool wear.
All Action impact sockets are manufactured according DIN 3121 and DIN 3129. Universal joints and thin wall sockets are supplied without warranty.
Worn sockets cause loss of power and wear to the square drive of the tool increases vibration to the operator. Replace your worn sockets in time. |
|
Lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations.
We take a pride in creating products that provide long life under the harsh applications of industrial usage. |
|
Impact Sockets
No. 5 Spline Drive
3/4 Inch Drive
1 Inch Drive
1-1/2 Inch Drive
1/4 Inch Drive
3/8 Inch Drive
1/2 Inch Drive
Hex Bits
2-1/2" Drive
|
|
For clean your situation, never rust, use stainless.
When you drive stainless screw, the magnet power is not useable.
You need retaining part.
So our nutsetter is for special conditions.
Our brand GFB |
|
All the FAB, RAF and Pluto series screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller. The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached.
Heavy duty construction for industrial environment with as many options as you can name (soft start, adjustable speed, torque signal,screw depth control, number of cycles control, remote start, remote reverse, multiple outputs, etc.) position these controllers at the top of their class. |
|
The smallest and best value torque multiplier, with manual power application from 100 to 13.000 Nm. Particularly light and handy with return stop. The LÖSOMAT high torque multiplier is maintenance-free.
Main application areas:
Steel construction, power plants, transport industry, chemical industry, plastics industry, cable cars, mining, shipyards and paper factories |
|
Norbar gearboxes are built to an extremely high standard of precision. All gears rotate on needle roller bearings about hardened and ground journal pins. As a result, Norbar Handtorques can be relied upon to have a torque multiplication accuracy of 4%, throughout the operating range, taking the uncertainty out of high torque tightening.
No gearbox is 100% efficient and so the velocity ratio (the number of turns that the input has to make to achieve one revolution of the output) is not the same as the torque multiplication ratio. Norbar multipliers are engineered such that each gear stage has a velocity ratio of typically 5.45:1 which results in a true torque multiplication factor of 5:1.
Torque output calculations are therefore a matter of simple arithmetic with little risk of incorrect bolt loading due to conversion errors. Other manufacturer's multipliers often require graphs or formulae to calculate the input torque to achieve a particular output.
The Norbar Handtorque is the most comprehensive multiplier range available. Standard products are available up to 47,500 N.m (35,000 lbf.ft) and 'specials' to 100,000 N.m (73,000 lbf.ft). A range of 'nose extensions' for reaching difficult to access bolts and full range of torque transducers for highly accurate torque monitoring are available.
|
|
Features and Benefits
Maximum rated input of 154 foot per pound (209 Nm)
Maximum rated output of 8,000 foot per pound (10,846 Nm)
Effective multiplication 52.0:1 +/-5%
Reaction system: reaction plate with slave drive
Gear System: three stage planetary
Anti-backlash device: self-contained, 3 position
Product Details
Length 15-3/16"
Weight 50.3 lbs
Gear Ratio 60:1
Head Depth 10-3/4
Head Length 51-3/16
Input Drive 1-1/2" Sq. Female
Output Drive 1-1/2" Sq. Male |
|
Features and Benefits
Maximum rated input of 154 foot per pound (209 Nm)
Maximum rated output of 8,000 foot per pound (10,846 Nm)
Effective multiplication 52.0:1 ~5%
Reaction system: reaction plate with slave drive
Gear System: three stage planetary
Anti-backlash device: self-contained, 3 position
Product Details
Length 15-3/16"
Weight 50.3 lbs
Gear Ratio 60:1
Head Depth 10-3/4
Head Length 51-3/16
Input Drive 1-1/2" Sq. Female
Output Drive 1-1/2" Sq. Male
Exist in 750ft, 1200ft, 2200ft, 3200ft, 5000ft and 8000ft
|
|
FUTEK's Torque Wrench - Torque Sensor offers a unique solution for Torque auditing applications. The TAT500 Torque Wrench - Torque Sensor is available in Stainless
Steel construction with an comfortable rubber grip.
The standard TAT500 Torque Wrench - Torque Sensor can be modified or customized to meet your requirements and most capacities are in our inventory, making them available for quick delivery. The TAT500 Torque Wrench - Torque Sensor Series is manufactured in USA and uses metal foil strain gauge technology.
Product Highlights:
Designed for Torque auditing
Strain Gauge Based
Stainless Steel Construction
Rubber Grip |
|
Norbar manufacture an extensive range of high quality torque wrenches to cover torque values from 1 N.m to 1500 N.m. They are designed and manufactured to exceed international standards for accuracy.
In addition to the normal 'adjustable' torque wrenches, Norbar offer Production 'P' Type versions which can be pre-set and dedicated to a particular application. This setting system is designed to discourage unauthorised alteration.
All Norbar torque wrenches are offered as standard with a quality ratchet. For applications where interchangeable end fittings are required, 'Torque Handles' are also available in various models up to 550 N.m.
|
|
| Crane Electronics new angle and torque wrench is more than a simple audit wrench. The torque measurement specialist has merged comprehensive SPC, an advanced torque readout and a superior torque/angle wrench into an ergonomic package that is hard to beat. The wrenches cover a torque range from 0.1Nm to 1500Nm. They have automatic tool head ID and lenght compensation function. Wireless communcation makes Poke-Yoke applications possible. |
|
| Proper torquing of NALGENE closures is critical to leakproof sealing. These wrenches can be used to confirm capping machine settings, on-line inspection and to check prototype torques. Must be used with NALGENE torque wrench fittings. Be sure to order fittings that match closure resin. |
|
Features and Benefits
This Proto Torque Wrench is made from high grade steel for strength & durability
Positive locking mechanism to dial and lock in desired torque
Thin head design to allow access in tight areas
Manufactured to meet ASME B107.14M specifications
The "C" Series torque wrenches meet normal industrial torque applications, general industry, heavy equipment and maintenance
Calibrated to +/-3% in clockwise direction and +/-6% in counter clockwise direction
Product Details
Length 15-1/2",393.7mm
Weight 3 lbs, 1.36 kilos
Drive Size 3/8"
Head Depth 1-1/64"
Head Length 1-7/16"
Torque Range (Nm) 16 - 80 |
|
Applying a precise level of fastener torque is critical in many assembly operations. Teledyne Instruments offers a number of products for measuring fastener torque and calibrating torque wrench tools.
The LC-20 Torque Wrench Calibrator is a microprocessor-based instrument that provides measurements traceable to NIST. Lightweight and portable, it can be used in the field, laboratory or on the factory floor. The LC20 can be purchased as a torque wrench calibrator or a checker. |
|
Lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations.
We take pride in creating products that provide long life under the harsh applications of industrial usage. |
|
Features:
- All styles of metric and fractional hex sizes through 1 1/4 inch
- 1/4 -1 inch standard square drives
- Special shapes, sizes and drives made to order
- Magnetic, ball, vacuum and other fastener retaining styles |
|
Sockets & Socket Sets
Impact Socket Sets
Impact Sockets
Standard Socket Sets
Standard Sockets
Nut Setters & Nut Setter Sets
Socket Accessories
Bolt Extractor Sockets & Bolt Extractor Socket Sets
Spline Sockets
|
|
| ... products without technical information |
| |
|
|
Screwing tools
