|
|
CAPACITY ON 6 SPIRALS HOSE: 2"
CAPACITY ON 4 SPIRALS HOSE: 2" 1/2
CAPACITY ON 2 SPIRALS HOSE: 3"
MAXIMUM CUTTING Ø: 100 mm
REVOLUTIONS/MINUTE: 2900
PNEUMATIC INPUT MAX: 7 BAR
BLADE Ø: 400 mm
SUCTION CONNECTIONS: included
WEIGHT: 240 KG
DIMENSIONS L x D x H: 1025 x 700 x 1150 mm
STANDARD VOLTAGE: 400V 50Hz 3PH
MOTOR POWER: 5.5 KW
STROKE COUNTER: included
SAFETY PROTECTION: included
MEASURING HOSEHOLDER: OPTIONAL
CENTRING DEVICE: OPTIONAL
METER COUNTER: OPTIONAL
|
|
EXTERNAL SKIVING: 2"
INTERNAL SKIVING: 2"
REVOLUTIONS/MINUTE: 200
PNEUMATIC INPUT MAX: 7 BAR
WEIGHT: 126 KG
DIMENSIONS L x D x H: 725 x 807 x 1070 mm
STANDARD VOLTAGE: 400V 50Hz 3PH
MOTOR POWER: 0.75 KW
SAFETY PROTECTION: included
PNEUMATIC VICE: included
ELECTRIC PEDAL: included
TOOLS HOLDER: OPTIONAL
|
|
.Hose size : 1/4" to 2" 4 SP
.Motor : 0,25 kW / 230-400V 3 ph
.Rotation speed : 100 rpm - 2 rotation ways
.Control by pedal
.Included : set of ODER 6-50
.Optional : ODI |
|
Description:
Cuts in 7 seconds. Jaws slide open quickly to save time between cuts.
- 11-ton (97 kN) ram powers cutting jaws. Jaws are specially hardened and precision ground to hold sharpness.
- Lightweight and easy to use. |
|
SP-02P Squeeze-Eze™ Power Pack
SP-02P is designed to use the identical jaws as the SP-01P, but delivers considerably more power for tougher applications. Made of durable aluminum, the tool is small (5 1/2" long x 1 3/4" diameter), lightweight (13 oz) and can be operated at air pressure of 60-100 psi (850 lbs. of cutting force). Will cut up to 0.10" soft steel wire.
A foot operated model is available (SP-02PF) which includes two (2) 5 foot air hoses and hex keys. Optional WS-2000 work station, A-202 bench stand and 105 four way footswitch are available.
As with the SP-01P, the SP-02P uses the jaw sets listed below. Jaws are optional. Order separate. |
|
System for crimping 10-1200 mm²
We have hydraulic crimp systems to compress connectors from 10 to 1200 mm². The system is built up of pumps and crimping heads that can be freely combined. There is a wide range of accessories for crimping, pre-rounding, cutting, etc. |
|
| The HPA 400 offers the well established advantages of the dieless Novopress indent crimp in combination with a state of the art electro-hydraulic battery drive. With only 7.5 kg and exemplary ergonomics, our HPA 400 sets new standards in terms of operator convenience and safety in its class. Without any die change you crimp in only 9 sec. and up to 120 times per charge, various make of lugs or sleeves in CU and AL quality from 16 to 400 mm2. The 90° rotatable crimping head allows convenient crimping even in restricted working space. Delivered including box, charger and spare battery. |
|
Description:
360° rotating head - comfortable to use at any jobsite.
- Lightweight, compact size makes it easy to carry and easy to use.
- Two-speed hydraulic pump for short cycle time.
- Automatic retraction when crimping and cutting cycles are complete.
- Includes a steel carrying case with spaces for blades and adapters.
- Uses all optional CCX blades and adapters (see page 145).
- U.S. Patent #6,206,663 and Patent Pending. |
|
Crimping connectors with the Stanley Hydraulic Tools CT Series crimpers is quick and easy. They are 5-10 times faster than hand-pumped tools and more than twice as fast as high pressure double acting crimpers.
The CT Crimpers require no booster or intensifier which means they can be operated directly from the hydraulic circuits already installed on your line trucks, or from a dedicated power unit, or from one of the STANLEY® lightweight, portable HP Power Units.
Swivel Design on all models provides 360° continuous rotation of the die head for easy alignment to give higher quality crimps.
1650 Models allow the use of the CT on almost any hydraulic system of at least 1,650 psi (114 bar). An accurate, built in relief valve ensures that at these system pressures and higher, a full die load is achieved preventing over-crimping.
|
|
.Hose size : up to 1 1/4" 4 SP
.Blade diameter : 300 mm
.Motor : 2,2 kW (3 HP) / 230-400V 3 ph / 3000 rpm
.Weight : 36 kg |
|
| The machines of the series TU or BM operate with the block through a mandrel that is inserted in the pipeline. The tool post disk is able ascend from a minimum of two till four turrets allowing a progressive and continuous workmanship. The interval of diameters that is able to be worked goes from a minimum of 18 mm to a maximum of 600 mm, for the standard versions. |
|
The US series portable pipe beveling tools
are designed for high quality bevels, facing
and machining on pipe and tube for weld
preparations on all machinable alloy pipes
including stainless steel, duplex, super duplex,
inconel or any others.
With their wide range, they are perfect from
the smallest boiler tube application up to a
24” pipe heavy wall. They can all be equipped
with different motors with a wide selection of
horse power, electrical, or hydraulical drive.
Their rugged design features self accepting
torque system and self centering inner
clamping, which allow one skilled operator to
perform alone and extremely quickly, multiple
machine-like bevels, avoiding the dangerous
and slow grinding operation.
Each machine is equipped with standard
tool plates accepting multiple tool bits,
allowing up to four simultaneous machining
operations. Such operations may include
beveling, compound beveling or “J” prepping
on heavy wall, facing, and counterboring. |
|
TECHNICAL DATA :
o Basic jaws: diameter 623 to 782 mm
Add. Jaws: diameter 486 to 652 mm
o Thickness : 1.5 to 15 mm
o Weight : 600 Kg
o 8 concentric stainless steel clamping jaws very close to the blade.
o Different motors available : 220V, 110V, pneumatic
|
|
The MM180 Clamshell Lathe from D.L. Ricci Corp. was designed for very large diameter, heavy cutting and beveling applications. This World's Largest gear driven split frame clamshell is portable for on-site machining applications and can accommodate flange and pipe sizes ranging from 144" to 177" OD. Utilizing our patented, fully adjustable, heavy duty bearing design, these portable type pipe cutting machines are capable of cutting, beveling, facing, boring and OD turning on all types of wall thickness. As a result of its superior strength, the MM180 pipe cutting and beveling machines are ideal for all on-site machining applications in new construction, decommissioning, component replacement and fabrication projects. Two patents are pending as a result of this new technology.
When you want big time accuracy in a portable clamshell lathe, with lots of machining options, you want the MM180 from D.L. Ricci Corp. |
|
| For the workmanships on the on the exchangers to pipes bandage, Cofim offers all the pipes cutter range ( series MU ). |
|
HB, Profile bending machines – Precision bending up to 180°
Easy to operate
Particularly suitable for the tight and precise bending of round and flat bars and other profiles.
Precise bending of whole series
True to size bending of whole series possible, thanks to angular and linear stops.
High bending power
with covered needle bearing and nickel plated turn-table.
Various sizes
for various different applications. |
|
Description:
- Ratchet action for increased leverage.
- Bypass the ratchet for fast, direct bending on smaller sizes.
- Heavy-duty welded construction for long, reliable service.
- Built-in bending degree indicator and easy to use bending charts for accurate, consistent bends. |
|
| The cutting tools have blades made of high tensile steel. The cutting edges are designed to make the cut surface as smooth and straight as possible, with the minimum force. We have two functional cutting and stripping tools, the SCT001 (0.5-6 mm²) and the Embla (0.02-16 mm²). For stripping the insulation from power cables there is the Tor stripping tool (ø 4.5-40 mm). The Oden stripping tool (ø 4.5-40 mm) is used among other things for signal, telephone and computer cabling. |
|
Description:
Two-speed mechanism saves cutting time by closing the blades rapidly and shifting to normal speed to perform the cut.
- No more pushing on stubborn release buttons-the blades open automatically when the cut is complete.
- Completely new ratchet mechanism improves durability.
- Narrow profile permits use in deep boxes, against walls, or on floors.
- Durable, lightweight fiberglass handles. |
|
This inexpensive and rugged machine can be bolted to any solid surface. The fully welded construction ensures that it will give years of maintenance-free service. It is simple and quick to use and has all the necessary features to ensure accurate repeatability.
The bender features an eccentric quick-clamping block which locks the copper bar in place. An extension bar provides the leverage to bend the copper round a 10mm radius former. An adjustable stop can be positioned to limit the bending angle and an adjustable length stop can be set to ensure that the bend is at the correct distance from the end of the bar.
|
|
Weight : 55 kg
.Hose size : up to 1 1/4" 4 SP
.Swage force : 137 tons
.Opening : Die diameter + 18 mm
.Standard die packages : 15 21 27 33 or 15 18 21 27 33 39 45
.Double speed pump |
|
Bending machine functioning on the principle of stamping.
6 standard models of bending machine allowing to curve tubes of 3/8 " to 16 ", and up to 20 " in option:
0B58 (jack 8 Tons) capacity: 3/8 " to 1 1/4 "
OB 30 (jack 12 Tons) capacity: 3/8 " to 2 "
OB 40 (jack 18 Tons) capacity: 3/8 " to 3 "
0B 50 (jack 30 Tons) capacity: 2 " to 4 "
OB 50 P (jack 30 tons) capacity: 4 " to 8 "
Super OBMP150 (jack 100 tons): 4 " to 16 " (20 " in option)
Three types of motorization: electric, pneumatic, gasoline.
Accessories available for bending until 180° for models OB 30 and OB 40
|
|
The Holmatro hydraulic cutter range is specially designed for heavy industrial applications and consists of different models with different blades and (cutting) features, for a wide range of industrial cutting applications.
Our mobile cutters are made of lightweight high-grade aluminium and are optimised for mobile use.
Our stationary models are specially developed for continuous use, processes whereby repeated tasks are carried out at a fixed point on a production line. The accent has been placed on durability of the tool and ergonomics for the operator. |
|
|
|
Tools for Pipes, Tubes, Cables
