|
|
SPRAY MASTER™ 250, 350 & 450 AMP AIR-COOLED
80% duty cycle, mixed gases :
- Heavy-duty contact tip and diffuser for improved
performance in high heat applications
- Rated at 80% duty cycle using Argon/CO2 gases
- Ergonomic handle design reduces welder's fatigue
- Simplified direct rear plug for ease of installation
- Easy to repair and maintain - only 10 parts
- Optional locking trigger or dual schedule trigger
(350 & 450 Amp only)
- Ideal for use with Argon mixed gas for Spray and
Pulse welding applications |
|
Axxair develops and produces in-line orbital welding machines for tubes. SATO-115 and 170 allow to make weldings for diameters from 12 to 170 mm and thicknesses from 1 to 3 mm (from 1 to 8 mm with bevelling).
SATO115: from ø 12 to 115 mm
SATO170: from ø 25,4 to 170 mm |
|
Opened drum reel, automatic recall by spring.
With detent pawl (ratchet) for manual blocking of the drum.
Pipe twinned oxygen-acetylene. Center & seal turning brass, 10 bars.
Construction steel with protector paint (blue), high industrial quality, drum assembled on ball bearing.
With guide pipe with rollers to facilitate rolling up and unfolding.
With twinned pipe, fittings & swell of stop assembled on pipe.
Option: swivelling mural fixing code 14/7000-BZ. |
|
Welding filters are manufactured from the highest quality glass or polycarbonate to comply with the requirements of the
Australian/New Zealand and other national standards (eg. ANSI Z87.1 & EN 169).
All CIGWELD Glass Filter lenses are fully standards approved. If non-approved lenses are used with CIGWELD standards approved
helmets it will void the standard mark approval and liability.2 |
|
The SEK500 and SEK600 series weld heads provide precision and repeatability for thousands of dollars less than similar weld heads. The SEK weld head activates the weld at a user defined pressure setting. This ensures that welds will be repeatable for small and large production runs.
The SEK500 series is designed to meet the needs of the battery manufacturing sector, while the SEK600 series weld heads are designed for general fine spot opposed resistance welding. The SEK500A and SEK600A are air actuated while the SEK500B and SEK600B use a foot pedal to lower the weld head. Air actuation has advantages in ease of use and convenience for high volume applications. The manual foot pedal weld heads have a lower initial cost and are well suited for short periods of use. |
|
Type TN:
- Three models are available, starting by 30 daN up to 150 daN.
- Welding force supplied by a servomotor type brushless. A Piezo sensor for force checking during the welding cycle can be set up. |
|
Unitek Peco Thin-Line Weld Heads consist of three families of full-featured products for precision metal joining: The 80 Series- 20 lb. (89N) - 40 lb. (178N); the 180 Series- 100 lb. (445N); and the 90 Series- 150 lb. (667N).
|
|
The Thinline Weld Heads consist of three families of full-features products for precision metals joining:
80 Series - 20 lb. and 40 lb.
180 Series - 100 lb.
90 Series - 150 lb.
FEATURES:
Adjustable Force-Firing
Low Inertia Designs
Air Actuated Option
Adjustable Tare Spring
Single Air Regulator
Up to 1.5 inch (38 mm) stroke
Up and Down Stops
Rugged Design
EZ-AIR Technology |
|
| Unitek Peco's Dual Pulse Series is a full range of Capacitive Discharge (CD) power supplies for precision resistance welding applications. Dual Pulse Series power supplies are microprocessor controlled, store multiple weld schedules, and provide consistent weld energy. |
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
Smith torch handles are available in three capacities to match job
requirements - Heavy, Medium, and Standard Duty. Torches have
silver brazed joints to provide overall strength and rigidity for safe
performance under rugged conditions. Torch handles are individually
tested to maintain the Smith reputation for quality and dependable
performance. And all standard Smith torches are covered by our
exclusive LIFETIME Warranty & Service Agreement. |
|
| The SW servo actuator family is designed for longer life and no-maintenance performance in a scissors, pinch or C-style resistance welding guns. Featuring an integrated motor this short body, compact package is designed to retrofit nearly every pneumatic fixture or robotic welding gun providing high force and fast moves. The SW actuator can be used with Tolomatic's Weld Axis™ or a robot's integral drive, providing excellent thrust control and repeatability. Factory lubricated for life with zero maintenance. |
|
| BrazeTec Italbras manufactures the complete product range of brazing alloys for soft soldering. Soft soldering alloys are supplied in several forms: wire, rod, bar, paste. Soft soldering alloys are mainly used in the installation technology. All soft soldering alloys do not contain lead. |
|
| Fusion Paste Soldering Alloys contain finely atomized filler metal, a fluxing agent, and a paste-like binder. Each of these components has a unique function to perform when blended into a Fusion Paste Alloy. All pastes are designed to be automatically dispensed to control costs and yield superior part joint quality. |
|
| With the exception of the conventional apparatuses, than they are based on the stored energy, the systems series MFR use the technology Smart Heat for to have distributed in automatic rifle all the power where, when and how much serves. Besides not to never demand the calibration, these systems incorporate two independent doors and also the exclusive device of car-extinction when not in use. MFR-SDX is born like saldatore and dissaldatore, but its configuration can be widened adding the thermal clamp for the rework of Smd. The reason for which we do not call it simply saldatore or dissaldatore, but arranges of rework, has had to the fact that already with the solo I draft and the nourished series of sagomate tips, every system MFR concurs to knit the little one chip, thus like removing, dissaldare and river-to knit every type of integrated circuit, until arriving to the SOIC, PLCC and QFP also of great dimensions. |
|
New system PS-800E rivoluziona the methods of manual welding arranging the power and the unsurpassable guaranteed control of process from the SmartHeat technology, with an innovative design.
Planned and realized for being a compact apt system for repetitive manual weldings, PS-800E is constituted from innovative power supply a collocabile one or over that under the work bank, bound together to an ergonomic one I draft and portasaldatore winning, because as they say. "also the eye wants its part".
The power distributed in way automatic rifle when it serves and the heart of the SmartHeat technology that remains on I only draft concurring the fast change of the single tip, not only render extremely economic PS-800E regarding the inziale purchase of the system, but also of the tips of reciprocation.
And it does not go forgotten that PS-800E, thus as all the SmartHeat® systems, NEVER do not demand the calibration.
|
|
| Brouwer Metaal is specialised in the production of spot welding electrodes. We machine any electrode according the drawings or samples of our customers. Electrodes can be machined out of CuCrZr, CuCo2Be, CuCoNiBe, CuNiCrSi or CuBe2 copper alloys. We produce them out of drawn, square, rectangular or hexagon bars as well as from pressed and forged copper plates. |
|
| Brouwer Metaal is specialised in the production of cold formed electrode caps. Besides the standards caps which can be found on our web site we also produce special caps according drawings. Cold formed caps outlast machined caps because of their undamaged copper structure. |
|
| Heron transgun---hanging spot welding machine, ZDN-025/035/040/050-005A-0001, the transformer is powerfull and pack design, we have X type and C type gun with different arm style, apply to the automotive car body weld and the other steel weld field |
|
|
|
Welding accessories and equipment
