|
|
| ARCON Splicer in Salisbury, Maryland manufacturers the Workhorse line of welding power sources that have Proven Reliability, Rugged Construction and Great Welding Chacteristics. Energy-saving Industrial inverter circuitry is based on the time-proven SCR Inverter design. Machines are designed to be simple to operate, deliver superior welding performance and to endure harsh work environments. All Workhorse welders now include the Seahorse Anti-Corrosion Protection Package that guarantees against corrosion-caused failures for 5-years. Welders are thermally protected in 5-zones to guard against internal damage from overheating and housed in a fiberglass reinforced case with dual fold-away handles and extra thick skids underneath to guard against external damage. Current/Time controlled cooling reduces the amount of dust being pulled into the machines. Current Workhorse models by ARCON include the Stickweld 300S with Lift-Start TIG ignition, the TIGweld 300ST with Arc Starter TIG ignition, the Robotic 300ST-R, and the MIGweld 300MS. |
|
K1297 AC/DC 225/125
The AC/DC 225/125 is the deluxe version of the world renowned AC-225 arc soldering. It uses the same traditional design of the AC-225, but adds the smoother, more stable DC splicer arc. Ideal for farm, shop, and home use where improved arc welding performance is desired.
The AC/DC 225/125 is an arc welding power source with an AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps. It is an extremely useful stick welding power source for maintenance repair, fabrication, construction, erecting and hardfacing applications. Also for cutting and piercing holes in steel. |
|
| To achieve maximum brazing rate and minimal labor cost, 6100 Automatic Welding Systems integrate a combination of standard Weldlogic products to provide a complete package. Specifically designed for precision automatic welding, 6100 systems allow circumferential, longitudinal and spot welds to be easily made with a minimum of operator skill. All components are fully intergrated to create a complete "ready-to-go" automatic welding station. |
|
| Unitek Peco's Dual Pulse Series is a full range of Capacitive Discharge (CD) power supplies supplier for precision resistance brazing applications. Their unique "Dual Pulse" function overcomes process variables; part and industrial electrode surface inconsistencies contribute to poor welds. Plating irregularities or contaminants, including oxides and oils, affect weld reliability. The Dual Pulse function virtually eliminates these problematic variables. |
|
| Studhorse 1200 stud welders require only 30A time-delay fuses and are designed for maximum portability, proven reliability and harsh environments. Digital Start/Stop replaces a mechanical contactor for increased reliability. These 1200 Amp Drawn Arc machines weld full-base studs and professional fasteners from 1/4 to 5/8 inches using time-proven SCR Industrial inverter circuitry for high-power efficiency and energy savings. Features include Step-Less .05 to 1-Second Time and Power Control; Short Circuit Protection; Corrosion Protection with a 5-year guarantee against corrosion-related failures; Pilot Current to help on dirty surfaces; Kickstart Circuit to ensure fast pull-up; Afterburn Circuit to enhance weld quality for small diameter studs; Built-In Industrial circuit breaker with 5-zones of thermal protection to protect components; and Individual Controls for Current and Time to reduce mode change time and errrors. At 1000 Amps, Duty Cycle is 1 stud every 10 seconds. The Sturdy Fiberglass- reinforced case protects machine when transported, dragged or dropped. Available in analog or digital models, complete systems are available with professional gun, cables and manual. |
|
The YD-350GB2 CO2/MAG industrial inverter brazing power source and the YW-35DD1YAD wire feeder with intelligent control box have been developed on Panasonic digital technology. It is 100% digital controlled and offers high quality welding and easy access to the IT world.
100% full digital control
Exact output parameters
Excellent welding results especially between 200A to 250A
Sharp FTT - quick and smooth arc start
Duty cycle: 350A / 60%
Dimensions: 510 x 380 x 494 mm (L x W x H), weight: 38 kg
Digital interface with Panasonic industrial robots
400 V AC, 3 phases, 50 Hz
Wire feeder with intelligent control box YD-35DE1YAD
Parameter setting through the intelligent control box
Digital display for both programmed parameter and actual welding parameter
Easy and logical parameter setting by LCD and jog dial
Motor equipped with professional encoder provides digital feed back control of wire feeding
Quality control
memory for 32 program
Monitoring function for welding current, welding voltage, wire feeding speed etc.
Easy transfer of programs to other 350 GB2 power sources
Customer benefits
Less spatter, constant, high quality welding lowers production costs
Reliable quality for low maintenance and service cost
Easy parameter setting by jog dial
Mobile compact size |
|
The YC-300BZ3 DC industrial inverter TIG splicer power source has been developed on Panasonic digital technology. It is 100% digital controlled and offers high quality welding.
Technical Data:
100% full digital control high performance welding
Exact output parameters
Sharp and stable arc start as low as 4 amp.
Welding Method:
1. DC TIG, DC pulse TIG for mild and stainless steel as well as titanium 0.3 6 mm, copper and brass 0.5 3 mm
2. DC TIG arc spot for mild and stainless steel with 2 x 2 mm thickness
3. DC stick for diameter 2 6 mm
Duty cycle: 300A / 40%
Weight: 36 kg
Digital interface with Panasonic professional robots
Arc drive function for stick welding
Dimensions: 510 x 380 x 410 mm (L x W x H)
400 V AC, 3 phases, 50 / 60 Hz
Digital display, LCD, jog dial
Digital display for both programmed parameter and actual welding parameter
Easy and logical parameter setting by LCD and jog dial
Quality control
99 memory programs
Digital connection with the PC / network for production
management and quality control
Customer Benefits:
Sharp and stable arc start
Reliable quality for low maintenance and service cost
Easy parameter setting by jog dial |
|
The YD-500AF2 is a MAG / Pulse MAG power source for automated brazing with Panasonic welding robotics.
Input Voltage / Frequency: 400V / 50 Hz
Input: 28 KVA
Output current, adjustable range: 40 500 A
Output Voltage, adjustable range: 12 45 V
Duty cycle: 500 A / 100%
Weight: 117 kg
Dimensions (L x W x H): 585 x 440 x 945 mm
The YD-500AF2 welding power source can be used for welding of mild and stainless steel.
Following welding methods are possible: Standard/ Pulse, Hybrid, Hard + Soft Pulse |
|
The YD-350GE2 MIG/MAG industrial inverter pulse brazing power source and the wire feeder YW-35DEB1YAD with intelligent professional remote control unit is based upon the latest generation of Panasonic digital technology. It has 100% digital controlled ensuring high quality welding and easy access to the IT world via PC based interface. It supports following welding methods: CO²/MAG, Pulse-MAG, MIG and Pulse-MIG.
Welding Power Source YD-350GE2YHD 100% full digital control
Exact output parameters
Suitable for aluminium, mild steel, stainless steel welding
Quick and instantaneous arc starts
High speed welding with less spatter with 32 bit technology
Quick response to changes in arc length
Duty cycle: 350A / 60%
Sharp FTT - quick and smooth arc start
Dimensions: 510 x 380 x 570 mm (L x W x H), weight: 66 kg
Digital interface with Panasonic professional robots
400 V AC, 3 phases, 50 Hz
Wire feeder with intelligent control box
Parameter setting through the intelligent control box
Digital display for both programmed parameter and actual welding parameter
Easy and logical parameter setting by LCD and jog dial
Motor equipped with professional encoder provides digital feed back control of wire feeding
4-drive wire feeder for aluminium, 2-drive wire feeder for mild steel and stainless steel available.
Quality control
Memory for 32 programs
Monitoring function for welding current, welding voltage, wire consumption etc.
Customer Benefits
High speed, high quality, less spatter welding
Easy parameter setting by jog dial
Exact output parameters for easy parameter adjustment |
|
Welding units WS 8000 and WS 8000S offers an exclusive technology with very high frequency pulsed current (4000 Hz). This technology confers very high level performs and incomparable features for a small size and weight.
The impulses are furnished in continuous current to optimise the brazing quality. The welding time of 10 ms and 50 impulses by second confer quality, homogeity and high efficiency of the welds.
The high range of the delivered power, permits to weld very important thicknesses, with real precision in the regulation not only for intensity and welding tie but not for impulse shape too. These parameters can be chosed separatly.
|
|
This universal-kind of electrofusion machine is suitable for brazing low voltage Polyethylene (PE) couplers (from 8 to 48 Volts) for high pressure conduits.
The POLYWELD machine is made in compliance with the current European standards and directives. |
|
The TIME Process is a tried and tested high-performance brazing process for manual and mechanised applications that has been doing sterling service in industry for many years. By high-performance, we mean a welding process that achieves either a deposition rate of at least 8 kg/h, or a wirespeed of at least 15 m/min with 1.2 mm steel wire.
Now the TIME Process has been totally digitised. With all the attendant benefits that come as standard with Fronius digital welding systems, such as: 100 % reproducibility of all welding results, modular system principle, digital microprocessor control, superb welding properties. |
|
| Time has proven ARCON's SCR Industrial inverter Type Arc welders have a greater reliability than other inverter designs. ARCON has not found a device or circuitry that is more reliable in delivering superior welds, and tests have shown the reliability is often 100 times greater than IGBT designs. In a 20-year period, only 30 SCRs were replaced in 2000 machines being used in the Shipbuilding Industry. ARCON uses it's SCR Inverter Type design in all products that presently include Stick, Lift-Start TIG, Capactive Discharge TIG, MIG, and Stud splicer power sources. |
|
WELDARC 1100
Industrial inverter for stick brazing 3-105A
SMALL, LIGHT AND ROBUST
x Performant in light weight and small dimensions
x Easy to use : 1 knob only
x Welding comfort thanks to arc force pre adjusted |
|
2 MACHINES : 320A IN COMPACT OR SEPARATED WIRE FEEDER + 500A IN SEPARATED WIRE FEDER
PERFECT SYNERGY FOR BRAZING ALL TYPES OF METALS
NEW ELECTRONICAL CONTROL FULL DIGITAL KONTROL - AUTOMATIC CONTROL OF THE ARC HEIGHT TO CORRECT WIRE LENGHT
TWINPULS TECHNOLOGY (two pulse) FOR A MINIMUM OF PENETRATION TO WELD VERY THIN THICKNESS WITHOUT ANY DISTORTION
x TIPTRONIC : settings and recording a program
x automatic adjustment of parameters
x easy adjustment of arc height and wire feeding speed
TWINPULS TECHNOLOGY
x double pulse
x allows a minimum of penetration when welding very thin thickness without any distorsion - specifically in aluminium
A PERFECT CONTROL OF THE WELDING CYCLE
x No distortion at ignition thanks to an automatic control of wire voltage and arc lenght
x pulsation control in 1000th of seconds
x automatic regulation of the wire lenght according to the arc height
x no endcraters nor distortion at the end of the welding seam
MIG TORCHES POWERTEK
the ELEKTROPULS 340 and 500 units is associated with POWERTEK torches, aircooled or watercooled, in 3 or 4 meters
x adjustment of the arc height and arc power directly on the torch
x recall and record of a program directly on the torch |
|
Genesis 503 PME
These are industrial inverter power sources purposely designed for exceptional quality continuous wire splicer (MIG/MAG, PULSED MIG) and electrode welding (MMA); TIG welding with contact ignition is also possible.
The control panel is easy to use and 52 different synergic curves are available to the operator for MIG/MAG and pulsed MIG welding of all the most common materials.
A duty cycle tested at 40° C ensures interruption free operation to 100% at 25° C.
performance in pulsed arc welding. They are ideal for use even with thin aluminium and stainless steel sheet, with which they give a weld quality similar to that achievable with TIG welding.
The WF104 separate wire feed unit weighs only 19 kg (without wire professional reel) and can be positioned above the power source on a pin, which permits 360° rotation, or at a distance near the work place by means of a connection cable bundle up to 10 m long; the microprocessor, the Professional encoder and a sturdy 4 roller gearmotor ensure maximum precision in welding wire delivery speed.
At switch-off, the last welding condition is stored, making it easier to re-start work after interruptions. |
|
| The Workhorse MIG/Stick product is designed for ruggedness and portability in high volume production and construction. Small size allows for more professional workstation flexibility without the need for facility expansion. At 80 pounds, the MIGweld 300MS delivers superior smooth arc eliminating the need for costmetic "repairs" to make welds look good. Modern 14-pin connector manufacturers accepts a wider variety of wire feeders and spool industrial guns. This machine features a built-in industrial circuit breaker, corrosion protection and 5-zone thermal protection at no additional charge. |
|
| Machines for PROFESSIONAL SAW brazing in combination with Kjellberg welding power units a wide range of technological solutions for an effective use in the industrial welding production. |
|
The latest generation of industrial welding equipment can be programmed with specific process preferences of your individual choice or for the actual splicer processes. Based on a solid state power source, it weighs just 1/80 of the 70 year old ancestors but has more power. Our different plasma cutting equipment enables you to quickly and accurately cut all types of metals.
|
|
MIG/MAG - conventional all-rounders and digital experts.
Our 1000 times tried and trusted step switch controlled machine series MIRA, SATURN and WEGA or the completely digital PHOENIX industrial inverter machine series - it's your choice!
THE CONVENTIONAL ALLROUNDER - THE STEP SWITCH CONTROLLED MIG/MAG WELDING LINES MIRA - SATURN - WEGA
Tried and trusted more than a thousand times over: Robust, step switch controlled - specially designed for applications in trade and industry involving tough operating conditions. They offer universal applications thanks to the many different machine versions from compact/decompact and gas /water cooled through to various wire feed units. They also offer impressive, self-explanatory and intuitive operating concepts for varying requirements - the simplest possible operation for everyone!
PHOENIX - THE DIGITAL MIG/MAG PULSE SPLICER MACHINES
This is our completely digital inverter range of machines with maximum simplicity and ease-of-use for all requirements from manual to complex automated MIG/MAG pulse and standard applications. The PHOENIX range promises maximum efficiency thanks to the low-spatter welding on all materials and application, perfect ignition and welding properties with 100 % reproducible results with maximum quality and optimised control interfaces for every application - and these machines keep that promise! It's up to you: PHOENIX PROGRESS - the ideal introduction to the digital machine range - or PHOENIX EXPERT - the high-end system for complex applications, and not just in automated systems. Whichever you choose, you will get pre-programmed welding tasks (256 JOBs) so that you can concentrate fully on your work. The portable design of the PHOENIX 300 also impresses with maximum mobility for assembly work. All in all, the PHOENIX range is ideal for industrial robot, industrial bus and mechanised applications and documentation via optional interfaces! |
|
Metal Inert Gas brazing and Metal Active Gas welding are the most widely used welding processes in the world today. The range of possible uses is especially wide in the case of the versatile MAG process, which is suitable for unalloyed, low-alloy and high-alloy base metals. This makes it ideal for use in both the production field and for repair welding. The MIG process, on the other hand, is used for aluminium and copper materials.
All in all, then, a highly versatile welding process. |
|
Cold Metal Transfer (CMT), a new chapter in the history of brazing. The TPS 5000 CMT is a fully digital micro-processor controlled inverter welding system that supports the Fronius CMT process. Besides MIG/MAG, the system is also suitable for TIG and electrode welding.
The innovation that the CMT process introduces is that wire feeding is integrated into process driver. This makes it possible to reduce the amount of heat applied; and that means no spatter on the work piece join.
The TransPuls Synergic 5000 CMT with 500 A is ideal for applications in the automotive and automotive supplies industry, avionics and spaceflight, metal working and portal building. In fact, the system is suitable for any automated or professional robot assisted job. The typical fields of application are thin and ultra-thin sheet joins of 0.3 mm or more, MIG soldering of galvanized sheet metal, and steel/aluminum joints.
|
|
|
|
Welding stations
