|
|
|
|
|
|
Static charge and EX protection – no problem
Electrically conductive NORRES hoses are capable of electro-static discharge (according to BGR 132, formerly ZH 1/200) by grounding the spiral and are conform to the requirements of the European ATEX guideline
Applications
Abrasion-proof and electrically conductive suction and transport hoses, especially suitable (different construction)
- in areas liable to contain explosive mixtures (explosion protection)
- for abrasive solids such as dust, powder, fibres, chips and granulates
- for aggressive gaseous and liquid media
- for de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibres, for silo vehicles, as conveying hose in glassworks, docks, steelworks, stone pits, shipyards, cementworks etc.
- as robust protection hose
Some properties of electrically conductive hoses
- capable of electro-static discharge (according to BGR 132, formerly ZH 1/200) by grounding the spiral
- conforms to the requirements of the European ATEX guideline
Temperature Range
-40 °C up to +250 °C (short time to + 270 °C approx.)
Wall thickness
0.4 – 2.5 mm
|
|
PU suction and transport hoses, electrically conductive ≤ 10 4 Ohm.
Available in lightweight up to heavy qualities, hose wall: 0,7 mm up to 2,1 mm, DN 16 - DN 500
Applications:
dangerous areas, where electr. conductivity is demanded; suction and transport hoses for abrasive materials, gaseous and liquid media, oil spray extraction, protection hose against mechanical pressure
Properties:
- abrasion resistant
- resistant to oil and fuels,
- gas tight
- good chemical resistance
- free of plastizisers and halogens
- generally good UV and ozone resistance
- very flexible, lightweight
- small bend radius
- nearly smooth inside
- optimum flow characteristics
- electrically conductive to BGR 132 by grounding spiral
Installation and connecting possibilities:
hose clamps, hose reducers, hose connectors
Combiflex connecting system:
PU cuffs, PU-DIN-flanges, quick action cone flange joint system, PU threaded socket
|
|
exhaust gas hoses for temperatures up to + 1.100 °C (when exhaust gas funnels are used properly and fresh air is feed enough), DN 16 - DN 500.
Applications:
Extraction of engine exhaust gases, for all usual suction extraxtion systems such as hose reel, slotted channels, abovefloor and underfloor extraction, stationary suction plants, flue gas exhaust, vehicle construction, engine construction, aircraft industries, defence industries, general engineering, hot air, low pressure applications, furnace construction, iron- and steel works, infrared dryer plants, radiant heat protection ...
Properties:
extremely flexible, small bend radius, very lightweight,
Installation and connection possibilities:
- hose clamps
- hose reducers
- hose connectors
|
|
Today fresh, clean air in the workplace is to be expected and is considered an important productivity factor. You can make the grade with NORRES exhaust gas hoses.
Applications
Special exhaust gas hose, especially suitable
- for suction of engine exhaust gas
- for hose reel
- foe slotted floor channels
- for above and below floor suction extraction
Some properties of the NORRES exhaust gas hoses
- vibration resistant
- very good hest resistance
- minimum weight
- kink-proof
Temperature Range
-60 °C up to 900 °C (short time to +1100 °C approx.)
Wall thickness
0.4 mm approx.
|
|
Exhaust Gas Recirculation
Applications of Flexfab's charge air cooler hose or CAC...
Special pressure sensor hose, used to sense pressure differential between the exhaust manifold and the EGR tube. Connector temperatures to 450°F with no flow.
|
|
AG 2100 MARINE corrugated
Marine engine wet exhaust systems where the exhaust gases are mixed with the discharge of cooling water.
From 76 to 205 mm.
|
|
|
|
|
|
Viking, Saracen & Saxon layflat hoses
Viking fire hoses are chosen by fire fighting professionals throughout the world for their quality, performance and reliability. It is constructed with an all synthetic woven textile reinforcement encased in a blend of high tensile PVC/Nitrile rubber which forms a unified lining and cover. The outer ribbing provides excellent abrasion resistance. Viking fire hose is independently tested to BS 6391 :Type 3 1983 by RAPA Technologies.
Saracen fire hoses are for use where fire fighting is less frequent or intensive. Saracen offers an affordable alternative to Viking without any performance penalty. It is constructed in the same layered way to the Viking though without the heavy protective ribbing, nitrile-PVC is used which makes the hose lighter.
Saxon fire hoses are built to the highest quality, lightweight but with exceptional strength. They are used by fire brigades and industrial users worldwide. Available with a polyeurethane outer coating for extra abrasion resistance or uncoated for lightness, they are ideal as washdown hose.
|
|
Tube: Synthetic rubber blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: special synthetic rubber blended, black or red, weather and ozone resistant
Application: for fire fighting vehicles or use on hose reels for fixed installations.
Temperature: -30℃～+80℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
APPLICATIONS: For use on hose reels in buildings and factories for first aid fire fighting purposes.
TUBE: Synthetic rubber.
REINFORCEMENT: High tensile synthetic textile filament yarn.
COVER: Red.
COLOR: Ozone and weather resistant synthetic rubber.
SURFACE: Smooth.
OPERATING TEMPERATURE:-20°C - +80°C
|
|
Hardly inflammable PU suction and transport hoses,
available in lightweight up to heavy qualities, DN 16 - DN 500
Temperature range: -40 °C up to +90 °C,
intermittent up to +125 °C
Applications
Hardly inflammable PU hoses for abrasive materials, woodworking machines, chips exhaust in woodworking industries, protection hose against mechanical pressure
Properties:
- hardly inflammable acc.to DIN 4102 BI
- extremely flexible, small bend radius
- extremely abrasion resistant
- generally good UV and ozone resistance
- nearly smooth inside, optimum flow characteristics
- crusch resistance (only Master-PUR STEP)
Recommended connecting elements:
hose clamps, hose reducers, hose connectors
Combiflex connecting system:
PU cuffs, PU DIN flange, quick action cone flange system, PU threaded socket
Hoses are also available in the following qualities:
- microbe and hydrolysis proof
- food quality (FDA)
- antistatic and electrically conductive
|
|
NORRES offers an entire range of flame-retardant hose products that have all undergone independent laboratory testing and which have official approvals and/or certificates for the complete hose.
Applications
Abrasion-proof and flame-retardant suction and transport hose, especially suitable:
- for applications, where flame-retardant hoses are demanded
- for abrasive solids such as dust, powder, fibres, chips and granulates
- for gaseous media
- for de-dusting and suction plants
-
Some properties of flame retardant hoses
- highly flexible and compressible
- flame-retardant according to: UL94-V2, DIN 4102-B1, DIN 5510
- kink-proof
Temperature Range
-70 °C up to +600 °C (short time to +700 °C approx.)
Wall thickness
0.6 – 1.5 mm
|
|
|
Ny-Shield Tubing is black 95 Durometer Polyurethane Tubing with a flame retardant outer jacket to protect the tubing from sparks associated with welding. In addition, the outer jacket also resists oils, grease, Ultra-Violet Light, heat deterioration and many chemicals. Since the outer jacket does not stick to the inner tube, it can be easily peeled back so that push-in, compression or barbed fittings can be installed. Ny-Shield is available in a choice of black, red, yellow or blue outer jackets and can also be coiled into Precision Coils and Self-Storing Air Hoses.
|
|
NORRES flame retardant polyurethane hose for he wood industry: TIMBERDUC®
TIMBERDUC® hoses were special developed and optimised for the removal of wood dust and chips.
Applications
Special suction and blast hose in flame-retardant polyurethane and wood preservatives, especially suitable (in different types):
- for the suction of wood dust and wood chips on wood processing machines
- for abrasive solids like dust, powder, fibres and chips
- for de-dusting and suction plants
- for CNC machines
- as robust protection hose
Properties
- conforms to the safety regulations of the German Wood Trade Association
- flame-retardant according to: UL94-HB, DIN 4102-B1
- capable of electro-static discharge (according to BGR 132, formerly ZH 1/200) by grounding the spiral
Temperature Range
-40 °C approx. to +90 °C approx. (short time to +125 °C approx.)
Wall thickness
0.4 – 1.5 mm
|
|
# PVC Sheathed Nylon tube (Flame retardant & standard PVC)
# Weld Spatter Tube (Flame retardant PVC Covered PPU)
# PVC covered Nylon
|
|
FLEXWELL Safety Pipe®
FSR - an innovative product, tried and tested many times over
Our patented FLEXWELL Safety Pipe® provides you with a dual-wall system to transport combustible or water-hazardous media - doubly sure, monitorable and design-approved.
Areas of application
Transport of environmentally hazardous, combustible, toxic fluids and gases.
|
|
Highly flexible during use, unsurpassed elasticity and unbeatable return force. The new, dimensionally stable PUN-S from Festo.
• Harmonised with all fittings and couplings thanks to internal and external calibration
• Also available in the form of preassembled variants
• Suitable for compressed air and vacuum
• Wide choice of tubing lengths and diameters
|
|
LPG®
Properties
Can be installed quickly and simply, with no need for welding or X-ray tests. Just single compression connectors at the start and end of the entire pipe
LPG®
Installation/assembly of a special steel pipe for high pressure, large lengths.
Area of application:
transport of liquid and gaseous media.
Structure
Flexible, endless production, single-wall, mechanically reinforced pipe system. Medium pipe: special steel
|
|
|
|
|
|
SAT tubing is produced with specially designed exstruders and extrusion process in clean-room, we use only PFA and FEP UHP certificated, SAT is certified ISO 9001, during the exstrusion we have the costant control of the OD and ID by electronic laser and a sy for the discharge of the electrostatic charge, all the components of the exstruder are manufactured with special materials that don't release impurity. Tubing cleanliness is maintained during and after extrusion including continue nitrogen purge, immediate capping and packaging in heat-sealed double polyethylene bags. The tubing coils are stocked in clean-room.
SAT PFA and FEP tubing Feature:
- Low levels of extractable fluoride ions
- Improved crack resistance and strength
- Improved chemical resistance
- Excellent resistance to extremes of temperature
- Reduced chemical carryover and permeability
- Improved wash ability through generated charge levels and smoother surfaces
- Non-flammability
- Reduced ionic attraction
- High resistance to weater and ageing
- Ecellent dielectric properties
- Non-stick characteristics
- Increased mechanical abilities
- Higher burst pressure
|
|
|
Heating hose has been especially developed to maintain the temperature of the most diverse types of media, such as chemicals, solvents, oils, greases and even abrasives materials. For example thes heated hose can be used for loading and unloading lorries and ships.
|
|
lexible Nylon Tube Imperial
* Nylon 12
* Stock sizes from 1/8” to 1” OD (Available in medium or light wall)
* Choice of Colours
* Flexible
* Lightweight
* Good Chemical Resistance
|
|
|
|
|
|
SAT tubing is produced with specially designed exstruders and extrusion process in clean-room, we use only PFA and FEP UHP certificated, SAT is certified ISO 9001, during the exstrusion we have the costant control of the OD and ID by electronic laser and a sy for the discharge of the electrostatic charge, all the components of the exstruder are manufactured with special materials that don't release impurity. Tubing cleanliness is maintained during and after extrusion including continue nitrogen purge, immediate capping and packaging in heat-sealed double polyethylene bags. The tubing coils are stocked in clean-room.
SAT PFA and FEP tubing Feature:
- Low levels of extractable fluoride ions
- Improved crack resistance and strength
- Improved chemical resistance
- Excellent resistance to extremes of temperature
- Reduced chemical carryover and permeability
- Improved wash ability through generated charge levels and smoother surfaces
- Non-flammability
- Reduced ionic attraction
- High resistance to weater and ageing
- Ecellent dielectric properties
- Non-stick characteristics
- Increased mechanical abilities
- Higher burst pressure
|
|
|
|
|
|
FEP belongs to the category of meltable fluoroplastics. Longer production lengths and improved tolerances are possible, because of a different process being used in production. There is also a great variety of sizes available. Current diameters range from 0.20 mm to 130 mm.
FEP tubes from Saint-Gobain Isofluor distinguish themselves by their excellent ductility. In most cases the permeation coefficients 0 meltable fluoroplastics are superior to those of PTFE. The chemical resistance of FEP is only slightly inferior to that of PTFE. FEP is more transparent in contrast to the milk white PTFE material. FEP tubing is always the right choice whenever the observation of the flow of liquids in the tube is necessary. FEP is a material with a very good transmittance over a wide range of wavelengths.
The tubes can be supplied on spool and in coils or already cut to length in sections to the customers' specification.
Product Facts and Data at a Glance:
- Temperature stability from - 70 °C to +205 °C
- Low absortion of water
- Large factory lengths possible
- Available diameters ranging from 0.20 to 130 mm
- Tubes available in 10 colours from standard production
- Customized sizes - tooling costs not charged in most cases
- High transparency
- Also available in cut-to-lengths sections
- Very tight tolerances on request
|
|
Platinum-cured Versitec® Silicone tubing is designed for use in applications where flexibility, resiliency and durability are required especially when exposed to long periods of pinching, without altering its life expectancy.
Easy to fit on all types of connectors, its smooth inner surface reduces the risk of particulate entrapment and microscopic buildup during sensible fluid transfer especially in food, beverage and cosmetic industries.
Because of specific compound and extrusion process Platinum-cured Versitec® is taste and odor free ; it also meets FDA and BfR criteria.
The technical added values of Platinum-cured Versitec® make it the ideal means of transferring potable water and all kind of sensitive beverages.
|
|
|
The Series HL foodstuffs hose is another innovation and stands out because of its compact build. The heating element is wound onto the inner liner of the NBR hose and is thus vulcanised in the inner core. There is practically no more difference to an unheated hose either optically or in technical applications terms. The temperature sensor is also worked into the hose and captures the temperature directly at the hose wall.
|
|
|
|
|
|
The NORRES hoses for the food and pharmaceutical industry – Made in Germany - are especially aimed at the requirements of this market:
Applications
Form ultralight, compressible vacuum hoses to heavy-duty, totally smooth delivery and pressure hoses suited for vacuum applications, the different NORRES food and pharmaceutical hoses are especially suitable for:
- solids such as dust, powder, fibres and chips
- gaseous media such as vapors and smoke
- de-dusting and suction plants
- the food and pharmaceutical industry
- the chemical industry
- screening machines and tumbler screening machines
Some properties of our food and pharmaceutical hoses
- food quality wall complies with: FDA 21 CFR 177.2600 and 178.2010, EC guideline 2002/72/EC incl. the latest amendment 2007/19/EC, German guideline XXXIX BfR polyurethane
- approval according to EC guideline 2002/72/EC incl. the latest amendment 2007/19/EC for the complete hose by independent institute
- flexible
- odourless and tasteless
- microbe and hydrolysis resistant
- free of softener and halogens
Temperature Range
-200 °C up to +250 °C
Wall thickness
0.4 – 6.0 mm
|
|
|
|
|
|
Corroflon hose was the first convoluted PTFE lined hose product in the world to be developed specifically for process fluids transfer applications in pharmaceutical and chemical plants.
Corroflon was launched in 1978, and since then all of the major advances in convoluted PTFE hose design have been pioneered by Aflex Hose and incorporated into the Corroflon hose product range. These include anti-static PTFE, polypropylene braid, and EPDM or silicone rubber hose covers. Aflex Hose also developed and introduced PTFE lined and flared end fittings which protect the end fitting from contact with the process fluid, and provide clean, uninterrupted fluid flow through the end fitting.
Over the years, Corroflon hose and end fittings have been continuously developed and improved to maintain market leadership, and design features which have been identified as prime requirements have been incorporated at every stage.
These include the thickest wall and the best processed tube lining available, to prevent the development of porosity in the PTFE, which is the primary cause of premature failure in competitors’ products.
Corroflon is also fully kink resistant and vacuum resistant due to the tight helical wire reinforcement and the convoluted design profile.
The build quality and design excellence of Corroflon hose have been tested and proved in numerous applications worldwide, and hundreds of thousands of Corroflon hoses have been applied and used successfully over the last 30 years.
|
|
Silv-Ion™
Colex Silv-Ion™ PVC Hose and Tube contains a special FDA food approved formulation of clear flexible PVC Shore A 74.
This material has been developed to combat the microbial organisms that can be harmful to people, such as MRSA, E-Coli, Pseudomonas, Streptococci and Salmonella.
This material can also protect against microbial organisms that cause product deterioration, discoloration and bad odours.
Applications
Colex Silv-Ion™ is suitable for use in Hospitals and Healthcare due to it’s ability to destroy bacterial cells.
However, community-acquired MRSA (or C-MRSA) can now be found in communal areas, such as Schools, health-clubs and houses, making the applications for Colex Silv-Ion™ endless.
|
|
|
Goodyear can offer a variety of Food Transfer hoses that comply to FDA standards. Visit our website below for a complete list of the hoses available
|
|
Goodyear can offer a variety of Food Transfer hoses that comply to FDA standards. Visit our website below for a complete list of the hoses available
APPLICATION:
Goodyear's Exstatic® hose is for tank truck and/or in-plant transfer of dry,
bulk foodstuffs where there is a potential for electrical static build-up.
CONSTRUCTION:
TUBE: FDA UHMWPE (static dissipating/static conductive) has FDA/USDA compliant materials
COVER: Blue Plioflex® synthetic rubber (corrugated)/spiral transfer brand(wrapped impression)
REINFORCEMENT: Spiral-plied synthetic fabric with double wire helix
TEMPERATURE: -25°F to 180°F (-32°C to 82°C)
PACKAGING: 100' length, coiled, polywrapped
BRANDING: Continuous spiral brand "Goodyear™ Plicord Exstatic FDA Dry Material handling 150 psi."
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure. Use Goodyear's Insta-Lock Cam Groove Fittings with this product. See page 221 for available Insta-Lock products.
|
|
LIGHT DUTY BULK FOOD DELIVERY HOSE
TUBE:Non-toxic,food quality, abrasion resistant white NR.
REINFORCEMENT:High tensile synthetic cord with anlistalic copper wire.
COVER: Weather, ozone and abrasion resistant, smooth, cloth impression blue NR/EPDM
APPLICATION: Used (or delivery of bulk. Abrasive foodstuff.
TEMPERATURE:-30°C - +85°C (-22°F - 185°F)
|
|
|
|
Hoses
