|
|
Suction and transport hoses, made of polyurethan (PU), polyolefin, (PO) and silicone, with non rusting spring steel wire
Applications:
Food industry
pharmaceutical industry
comestics industry
chemical industry
the raw materials comply with the legal foodstuffs directives:
EC-line 2002/72/EG
2004/19/EG
FDA-directives
21 CFR 177.1680
21 CFR 175.105
21 CFR 177.2600
Properties:
- taste and odourless
- extremely flexible
- small bend radius
- gas tight
- smooth inside
- optimum flow characteristics
- high tensile and burst strength
- free of platizisers and halogens
- generally good UV and ozone resistance
- good chemical resistance
- electrically conductive to BGR 132 by grounding spiral on both sides
Installation and connection possibilities:
Combiflex connecting system:
FDA-approved cast-on swivel, fixed and cone flanges as well as threaded sockets
Further installation and connection possibilities:
- hose clamps made of stainless steel, hose reducers, hose connectors, heat shrink cuffs
|
|
IIR tubing for water
Very high gas and air impermeability ;
Very good dialectical properties and excellent resistance at UV radiations.
In compliance with FDA (177.2600-21) for food and water;
Temperature: -30°C~ +120°C
Length: as request( Up to 200m/roll)
Packing: Plastic bag, carton, Pallet
|
|
Food Grade Silicone Hose
Silicone hose does not crack or become porous, it maintains a very long and useful life.
- Can last up to 5 times longer than other materials
- Has a high tear strength - it is much stronger than plastic or ordinary rubber hose.
- Is resistant to ultraviolet rays
Silicone is not affected by bacteria
- The smooth continuous bore allows no place for bacteria to grow.
- If needed, silicone hose can be sterilized in boiling water
Silicone hose is efficient and easy to use
- The translucent hose allows you to see your product move through the hose
- Low compression set means no re-tightening of fittings or clamps
- Metal fittings can be easily pushed onto the hose
- Remains flexible to -55ºC
BEND RADIUS:
- 9/16", 5/8" and 3/4" = 5"
- 7/8" and 1" = 7"
VACUUM CAPABILITY:
- 9/16" and 5/8" = 3.9 psi
- 3/4" = 3.4 psi
- 7/8" and 1" = 2.9 psi
TEMPERATURE RANGE: -80ºF to +500ºF
- Up to 250ºF when using in tomato processing
|
|
|
|
|
|
PROTAPE® PUR 327 MEMORY
Special hose withstands frequent crushing. Its innovative design and the special properties of the raw materials make it ideal for long-term use in the open, no matter how abrasive the media conveyed.
Applications:
Abrasion-proof suction and transport hose, especially suitable:
- for public utility street cleaning vehicles
- for lawnmowers, grass sweeping machines and leaves exhaust
- for abrasive solids such as dust, powder, fibres, chips and granulates
- for gaseous and liquid media
- for feed transport
Properties:
- vibration resistant
- crush-proof
- highly abrasion-proof
- flexible
- optimized flow properties
- high tensile strength and tear resistant
- microbe and hydrolysis resistant
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
- very good low temperature flexibility
- small bending radius
- softener and halogen free
- gas and liquid tight
Material:
- wall: special premium ether-polyurethane
- spiral: special hollow plastic helix
Wall Thickness: 0.9 mm approx.
Temperature Range:
- 40 °C approx. to + 90 °C (short time to 125 °C approx.)
|
|
Provides lower emissions for a cleaner environment- excellent resistance to gasoline, oils greases and petroleum based fuels. Highly flexible and kink resistant. tight tolerances and consistant fitting retention. Resistant to heat preventing premature aging. Flammability rating: UL 94HB (liner and cover). High abrasion and tear resistance. Meets the stringent permeation requirements proposed by Californian Air Ressource Board (CARB) and the US Environmental Protection Agency (EPA). Translucent -Hardness SHORE A: 85- Specific Gravity : 1.18
Maximum recommended operating temperature : 85 C
|
|
Tube: black NBR/PVC, smooth, oil resistant
Reinforcement: textile braided high tensile synthetic yarn
Cover: black and smooth NBR rubber, oil, ozone, weather, abrasion resistant
Application: in fuel system like gasoline, diesel fuel, also suitable for loading and unloading tank cars, automobiles, oil refine plants and oil related industries, etc.
Temperature: -40℃～+100℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
TUBE: Oil and fuel resistanl conductive black NBR.
REINFORCEMENT: High lensile synthetic textile
COVER:Oil, ozone and weather resistant, black CR/NBR/PVC.
APPLICATION: For diesel, mineral oil and grease.
TEMPERATURE: -30°C-+85°C(-22°F-+185°F)
|
|
Petrol pump
VOLUKLER
For equipement of petrol pumps: regular, super and unleaded petrol and diesel oil.
From 15 to 25 mm.
|
|
Fuel Hoses and Hose Lines
We develop and produce complete line systems from the tank through to the engine. Our systems comply are cost-efficient and easy-to-install. Our special competence is the manufacture of tight connections between hoses, pipes and fittings and the assemblies to which these are hooked up. Safe and reliable parts are the result. Our product range includes supply and return lines and ventilation lines.
The Product Range Covers
- supply and return lines
- ventilation hoses and
- tank fillers
|
|
Fuelling Hoses without Helix "Yellow Band" for Petroleum Based Products, Page 103-104
Type HD (reel hose)
Type HD BIO (reel hose for biodiesel)
Type HD-RV (hose for flexible pipe joints)
Type XHD (fuel oil reel hose "Economy")
Reverse Side: Pressure Drop for ELAFLEX "HD" Hoses
|
|
Single line or twin line available
Tube: EPDM/SBR (NR/SBR) blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: EPDM/SBR (NR/SBR) blended, Red, Blue, Green. smooth weather and ozone, abrasion resistant
Application: for conveying welding gases
Temperature: -40℃～+90℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
straight-way type, for connecting to gas sockets models G2016 and G2019, inlet: Bayonet connection male, outlet: female thread, internal hose: stainless steel corrugated hose, external hose: rugged agraff hose made of stainless steel,
ambient temperature max. 70 °C, working pressure 0,1 bar,
|
|
Methane Gas Recovery Hose
(Landfill Hose)
Used on the well head, Flexfab's Methane Gas Recovery Hose provides a durable, flexible solution.
Flexfab's hose consists of two layers of spiral wound black Chloroprene coated fiberglass fabric with wire helix between the plies.
A loose orange hose jacket of conductive silicone coated fabric protects the inner liner from ultraviolet, ozone, and shields from abrasion
LEAKAGE: Zero leakage under water at 1 psi
MINIMUM CENTERLINE BEND RADIUS: 1 1/2 times the hose inside diameter
WALL THICKNESS AT CUFF: 0.090" to 0.065" - (except at fabric overlaps)
VACUUM CAPABILITY: 1" TO 6" ID - 3 psi vacuum at 200ºF
TEMPERATURE RANGE: -40ºF ambient to +200ºF*
PROOF PRESSURE: 66% of burst pressure
INSIDE DIAMETER TOLERANCE: +/- .030"
CUFF LENGTH TOLERANCE: Plus 3/8", Minus 1/8"
LENGTH TOLERANCE:
- Plus 1/4" per foot of hose length or portion thereof
- Minus 1/8" per foot of hose length or portion thereof
|
|
Gas and welding
PLUTON TWIN EN 559
Twin line rubber hose for welding gas supply.
From 5 to 10 mm.
VULPANE EN 559
Rubber hose for LPG (gas cylinders, heaters, welding, and LPG lines).
From 5 to 10 mm.
|
|
Description:
Pipe for harsh environments.
Tube intern combined with hexagonal ceramics plates.
Advantages:
New technology on the market.
High internal abrasive resistant
Long life of life.
Applications:
Harsh environments (steel-works, thermo plants, cement factories, mines,...).
Nanomaterials aspiration and repression very abrasives (dry cement, powder of coal, minerals hard).
|
|
Goodyear offers a variety of Material Handling hoses suitable for abrasive, bulk transfer, cement and concrete applications. Visit our websites below for a complete list of the hoses available
Bulk Transfer - http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=24&search_app_ID=Go%21
Cement & Concrete - http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=25&search_app_ID=Go%21
|
|
|
Goodyear offers a variety of Material Handling hoses suitable for abrasive, bulk transfer, cement and concrete applications.
|
|
Heavy Duty Suction Hose
* Constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 1” to 6” ID
* Bottle green and/or grey
* Weather resistant and durable
* Constructed from 100% PVC
* Excellent pressure and vacuum ratings
|
|
PowerWash programme
The force behind high-pressure cleaning
Gates' specialist hose and coupling programme designed for powerful performance in high-pressure cleaning systems.
Key benefits:
- First-class resistance to aggressive cleaning agents, high temperatures, high pressures, abrasion, oil and mechanical wear
- Lightweight
- Highly flexible
- Easy to handle
- Available in three colours: black, grey and blue. Grey and blue PowerWash hoses are suitable for use in hospitals, swimming pools and other applications where hygiene is of the utmost importance
- Including a comprehensive range of couplings for compatibility with industry's needs and PowerWash sleeves to protect your couplings in the most demanding environments
|
|
The water cleaning hose range is dedicated to hobby and professional water cleaning machines, with cold and hot water (not suitable for vapour steam applications).
It is designed according to safety norm IEC-2 with safety factor burst/working pressure 4:1.
The water blasting hose range is designed with criteria of maximum robustness and easy handling, complete with adedicated fitting solution, in consideration of safety and performance aspects connected with blasting applications.
Safety factor burst/working pressure is 2,5:1, it complies with international specifications (AS/NZ 4233.2, RMA-USA, ISO7751, BFPA-UK, prEN1829-2).
|
|
BELL suggests and supplies the EUROPOWER hose 352 type for the whole range of pumps.
It is a flexible hose for great perfomances, created for higher mecanichal and dynamic standards, with a more longevity and excellent flexibility.
Particularly useful for hydraulic systems with very high pressure and it is compatible with hydraulic oils, lubricants, minerals and phosphats.
|
|
Programme
• Smooth 1/8" to 4" (DN3 to DN100)
• Convoluted ¼" to 4"
• Virgin and anti-static PTFE
• Stainless steel (gas) high pressure hoses
• Nylaflow hoses with SAE approval
• Double/single braid
• Assembled or bulk hoses
Options
• Anti-static
• Ultra high pressure (KEVLAR®)
• Sanitary
• Silicone/Polyolefin/PP/PVC/Hytrel cover
• Anti-kink spirals
• Stainless steel wire (vaccuum convoluted)
• Fittings according NEN 3268, DIN 477 and
EN 13221
• Degreased, suitable for oxygen applications
|
|
Properties :
Application ==> Medium pressure circuits with restricted installation spaces, pre-control hoses
Standard ==> EN 857 1 SC
Inner layer ==> oil resistant synthetic rubber
Insert ==> one high tensile steel wire braided insert
Outer layer ==> oil resistant and weatherproof synthetic rubber
Colour ==> black
Min. temperature - 40 °C Max. temperature + 100 °C
Elongation + 2 % to - 4 %
Special features ==> narrow bending radius
Media : *Mineral oil
*Polyglycol based oil
*Water oil emulsions
*Water (0°C to + 70°C)
|
|
|
|
|
|
HIGH PRESSURE THERMO-HEATED HOSES
PREO high pressure thermo heated hose range is composed from several models (STANDARD, HIGH TEMPERATURE, SPRAY, WATER PROOF, SPECIAL) and either standards length according to Customer’s request ensuring accuracy and reliability for any type of application.An electric heating element, which controls the glue temperature inside the hose, screws around the pipe formed by a 8 mm diameter Teflon hose reinforced with a stainless steel sheath which can resist high pressures. The element is PTFE insulated, covered and screened with a glass fiber band and equipped with an earth wire and the temperature detecting probe. Finally a thick silicon foamed sheath guarantees a perfect thermal insulation, while a polyester anti wear cover increases the whole endurance to heat, impact and abrasions. The foam covering holds both the wiring for gun heating and powering and the 24 Volts supply to the electro valve. The solid housing of the hose end are hydraulically connected to the console and to the gun by two nipples, the electrical connection gets through fast external plugging.
|
|
Provides lower emissions for cleaner environment. Resistant to fuels and industrial lubricants - Excellent bend radius resulting in kink resistance . Thermoplastic liner offers good fitting retention and fast assembly. Ozone and UV light resistant. Flammability rating : UL 94 HB (liner and cover). Good premature aging performance. Meets the stringent permeation requirements proposed by both California Air Ressource Board (CARB) and the US Environmental Protection Agency (EPA).
Opaque gray Cover- Hardness Shore A 74- Specific Gravity : 1.13
Maximum recommended temperature : 82°C
|
|
|
|
|
|
Hoses made of HT-PUR are much more resistance to heat- up to a constant temperature of 125 °C, even short-term to 150 °C.
Applications
Universal and abrasion-proof suction and transport hose, especially suitable (light to heavy hoses):
- for abrasive solids solids such as dust, powder, chips, granulates and for high flow-rates extremely abrasive solids such as sand, gravel, refuse glass
- for gaseous and liquid media
for printing machines, blowers and compressors, for industrial vacuum cleaners, granulate conveying systems, for silo vehicles as conveying hose in glassworks, docks, steel works, stone pits, shipyards, cement works etc.
Properties
-very good heat resistance (better than comparable TPE and neoprene)
-highly abrasion-proof
- smooth interior
- optimized flow properties
- high tensile strength and tear resistance
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
-softener and halogen free
- gas and liquid tight
- capable of electro-static discharge by grounding the spiral
Material
- wall: special premium high-temperature-polyurethane (HT-PUR and Pre-PUR)
- spiral: spring steel wire
Temperature Range
-40 °C up to 125 °C (short time to +150 °C approx.)
|
|
|
Clippard offers a variety of miniature hose and tubing from copper, nylon and polyethylene tubing to flexible urethane and vinyl hose.
|
|
|
|
Hoses
