|
|
| Products 151 to 180 of 317 |
Outlet Valves, DIN 42568
Bronze body, screwed topwork in brass
Outlet with cap and chain
Part No. 03199.0150.0060
Inlet: round flange drilled acc. to DIN PN 6
Part No. 03199.0320.0060
Inlet: square flange drilled acc. to DIN PN 6
Available options - on request only:
* Handwheel in cast iron
* Handwheel in bronze
* Valve with opening indicator
* Valve with locking device (with or without lock)
Applications:
Suitable for transformer oil.
Working temperatures: -25°C / -13°F (248K) up to +115°C / +239°F (388K) and maximal 5.0 bar
|
|
COAX Hose Assemblies, non-reattacheable, Page GR 11-GR 12
Type COAX 21/8
Coaxial hose assembly for dispensers with active vapour recovery (Stage II)
|
|
Pigging is the complementary technology for batch and semi-continuous processes.
It is implemented at every process step, for the transfer of raw materials (unloading of tank trucks), semi-finished products (transfer from tank to tank) and finished products (transfer to filling lines).
|
|
|
Larox Flowsys Oy is manufacturing reliable and functional pinch valves to process industries worldwide. Larox valves are well suited for shut-off and control applications involving abrasive or corrosive slurries, powders or any other types of materials that can lead to packing and hardening at the valve. Various sleeve, actuator and valve body materials are available to handle a wide range of fluids and materials. The standard range of Larox Valve solutions is for diameters 25 mm - 1000 mm, temperatures -50 C - +160 C, and pressures 0 - 100 bar.
|
|
|
Both of our inline pinch valves offer a smooth internal profile suitable for powders, granules, slurries, liquids and gases in gravity, pressure and vacuum conveying ducts and pipelines. They are easily installed and require minimal maintenance. The hand operated anvil type piston closes a reinforced rubber sleeve by pinching it, while compressed air or suitable fluid accomplishes a bubble-tight seal on a heavy duty elastomer sleeve in the pneumatic version.
|
|
QV... - for the shutting off, distributing, dosing of powdery and grained bulk goods, for viscous, soiled and aggressive liquids, gases and mixtures.
Use
- pneumatic conveyors
- food industry
- chemical industry
- environment technology
- construction industry
- silos
Advantages
- straight, not redused passage
- no jam
- opens always in a circular shape
- no pressure drop
- long service life of hoses
- simple change of hoses
|
|
|
|
|
|
Features
* The only valve that closes “drop tight” on solids
* Body cavity acts as built-in actuator
* No cavities or dead spots to bind valve operation
* Full port design
* Not affected by harsh external environments
* No packing to replace or maintain, ever
* Cost effective and maintenance free
Materials of construction
* Cast Iron or Aluminum Body
* ANSI Class 125/150#, 250/300#
* Available Elastomers
Introduced and patented by Red Valve, the air -actuated Type A Pinch Valve offers a unique, cost-effective solution to flow control problems. More Red Valve Type A Valves are in use than any other Pinch Valve throughout the world. The secret is in the rubber sleeve - the valve’s only wetted part.
Actuation of the valve, the pinching action is accomplished by air or hydraulic pressure placed on the sleeve. The valve body acts as a built-in actuator, eliminating costly pneumatic, hydraulic, or electric actuators. Adding air pressure within the annular space between the body and the sleeve can open, throttle, or close the valve.
|
|
|
Automatic elastic deformation valves comprise a valve body and a cylindrical sleeve coated in natural gum or synthetic rubber.
|
|
|
Red Valve Pinch Valves are able to outlast conventional metal valve designs because of the unmatched abrasion resistance of our elastomer sleeves. The sleeve is the heart of every Pinch Valve, providing the valve lining, flange gaskets, and seating surface all in one. Since the sleeve is the only wetted part of the valve, there is no need for expensive metal alloys to be used in the body of the valve. This design also eliminates fugitive emissions, and the packing and seats that are responsible for most valve maintenance. And since the sleeve is the only wetted part, it is also the only replacement part. The sleeve is constructed much like a heavy-duty truck tire, with bias-ply, fabric-reinforced rubber providing the structural support of the sleeve.
|
|
|
The FIP Diaphragm Valve VM is particularly suitable for regulation or on-off operations with dirty or abrasive fluids. The hand-wheel operator and the diaphragm type sealing, allow precise regulation and reduce the water hammer. It can be mounted in any position.
|
|
|
|
|
|
Superior Design:
Hayward all-plastic diaphragm valves have been specifically designed to perform in the most demanding liquid, gas, and slurry applications in both on/off and modulating service.
Position Indicator:
Hayward's standard highly visible, beacon-type position indicator will always give positive position indication, unlike rising stem indicators that can be inaccurate because of misadjusted stems. Sight panels are made from clear Eastar®.
Diaphragm Saver:
The Diaphragm Saver travel stop is a standard feature on all sizes of Hayward Diaphragm Valves. Its special design prevents overcompression of the diaphragm and prolongs its service life.
No Corrosion Problems:
These valves have no wetted metal components. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments.
True Union Design:
Hayward Diaphragm Valves with socket or threaded connections have a true union design so that they can be removed from the line without having to disconnect piping connections.
|
|
For piping system control and regulation we offer pneumatically or electrically actuated valves in various materials.
Angle Seat Valves
Ball Valves
Butterfly Valves
DIASTAR Pneumatic Diaphragm Valves
Process Control Valves
Solenoid Valves
|
|
|
|
|
|
ODE presents the new solenoid valves 21JP and 31JP plastic series in order to preserve the machines from the oxidation phenomenon, from the more and more felt problem of lead and nickel release in food applications. This type of solenoid valve is suitable for applications in areas such as Vending, Coffee Machines, Pneumatics, Sterilization and other.
The new ODE 21JP and 31JP plastic solenoid valves series is characterized by the body entirely made in high quality PPS, that besides being fully compatible with applications of brass version, can reduce the limestone sedimentation ensuring a better product life. The high quality technopolymer used for this solenoid valves series is resistant against chemical and physical agents, allowing so their usage with and multiple fluids low pressure steam up to 140 ° C. The valves have 4 fixing holes ensuring interchangeability with the brass series and giving wider mounting flexibility. This new series has been subjected to numerous tests, including tests in ambient temperature and fluid for 900 hours, thermal stress and life cycles tests. Obviously all tests have been performed in real life applications. The available series includes 2/2 way N.C. and 3/2 way N.C solenoid valves, with the possibility to obtain the NSF approval and on demand the UL approved coil. The 21JP series works with coils 2.5W as well as 5W for energy savings purposes and lower operating temperatures.
|
|
|
Pneumatic pinch valves provide reliable flow control whenever a source of compressed gas is available. They typically have slower actuation times but higher pinching forces than solenoid valves, making them ideal for industrial dispensing, bulk fluid transfer, and vacuum operations.
|
|
Features
* High cycle life, repeatable control
* Sleeve is the only part in contact with the media
* Eliminates need for expensive body materials
* Versatile choice of sleeve trims
* Able to meet exact flow requirements
* External stroke adjustment
* Bi-directional droptight shutoff
Materials of construction
* Ductile Iron Body
* ATO/ATC, ATO/FC, ATC/FO
* Pneumatic, Diaphragm or hydraulic actuators
* Electric actuators also available,see 5200E
* Flanges ANSI B 16.5 Class 150
* DIN, ASA, or BS standards also available
* Available Elastomers
|
|
The new air operated pinch valves- Type VMP Compact
The compact pinch valves were developed for the automatic shutt off and dosing of several bulk and solids, for example: powder, granule, paste, suspensions, pellets and fibrous medium.
Furthermore the VMP-Compact valves get used for the shut off of dust or compressed air.
The air operated pinch valves of the series VMP-Compact are available in seven diameters, (DN010-DN050) with standard internal pipe thread according to DIN ISO 228 or NPT and optional specifications.
A selection of three different materials made in POM (Polyoxymethylen) allows the VMP-compact pinch valves to be used on food (POM nature white) and outdoor (POM black) applications, also available in POM conductive for ex-areas (EX).
Reduced weight, low maintenance, easy to re-sleeve and very cost effective are just a few of the new VMP pinch valve advantages.
|
|
Durbin Dual Adjustable Orifice Drain Valve
Cold Water Circulation
Durbin Soft-Seated Dual Adjustable Orifice Drain Valve
Maximum Pressure: 500 PSI
Maximum Temperature: 450º F (232º C)
Port Sizes:
3/4” - 1 1/2”
|
|
|
|
|
|
Series 240
Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Application
Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA)
Valve size ½" to 6"
Pressure rating ANSI Class 125 to 300
Temperatures -20 to 430 °F (-29 to +220 °C)
Industry codes ANSI, ASME and ASTM
Type 3241 Globe Valve with:
Type 3271 Pneumatic Actuator (Type 3241-1 Control Valve)
Type 3277 Pneumatic Actuator (Type 3241-1 Control Valve) for integral positioner attachment
Type 3275 Pneumatic Piston Actuator (Type 3241-9 Control Valve)
Valve body manufactured of:
Stainless carbon steel in acc. with ASTM specification
Forged steel or stainless forged steel
Stainless carbon steel
Undivided valve bonnet
Valve plug: Soft sealing, Lapped-in metal.
Standard version for temperatures ranging from –20 °F to 430 °F (-29 °C to +220 °C)
- Type 3241-1 DWA (Fig. 1) · ½" to 3" with Type 3271 Actuator (see Data Sheet T 8310-1 EN)
- Type 3241-7 DWA (Figs. 2 and 4) · ½" to 3", valve in forged steel up to 3", with Type 3277 Actuator for integral positioner attachment (see Data Sheet T 8310-1 EN)
- Type 3241-9 DWA (Fig. 3) · ½" to 6", with Type 3275 Piston Actuator (see T 8314 EN), for integral positioner attachment and/or limit switch (see Data Sheet T 8310-1 EN)
|
|
- Model / code: V134
- Category: Pneumatically Operated Valve
- Body Material: Aluminium bronze stainless steel
- Inlet Pressure: 400 bar; 280 bar
- Connections: 1/4 " BSPP
- Valve Size: 4,2 and 3,2 mm
- Function: 2/2 and 3/2 normally closed / normally open; universal
- Pilot Pressure: 5 to 7 bar
|
|
Pneumatically operated control valve in angle seat construction. The integrated positioner makes a compact design. All parts getting in contact with the fluid are made from stainless steel. Available also with digital positioner Type 8048.
|
|
|
Control valves for the food processing industry made of polished stainless steel with cavity-free body, PTFE packing or diaphragm seal and connection to a steam or sterile fluid line (optional). The valves comply with FDA and EHEDG regulations and can be sterilized using CIP or SIP.
|
|
|
Larox PVEG is a new pinch valve designed especially for waste treatment plant and other light slurry lines. The body material is polyamide blend, which makes the valve body very light, durable and cost effective. Larox PVEG has standard face to face ANSI B16 dimensions so it can easily be used as replacement to ball, plug and diaphragm valves. Currently Larox PVEG is supplied with handwheel for working pressure up to 10 bar. The available valve sizes are 50mm, 80mm, 100mm and 150mm.
|
|
Powder rotary valve
- High filling efficiency
- Sheared angle inlet
- Minimum air leakage
- Explosion proof models available up to 10 bar g
- Customised solutions
- Bored flanges in accordance with PN 10, ANSI 150 lbs and JIS
|
|
|
|
|
|
Winnow with diaphragm MUCON
A range supplements valves with diaphragm for the powders and the powders, with models for all industries.
The diaphragm is out of fabric or rubber. Only a column of product rests on the diaphragm and the unit is very robust.
The closing of the diaphragm is soft and does not damage the conveyed products (ideal for the gélules, compressed, confectioneries etc...).
These valves are completely tight and have a compactness.
Thanks to the concentric closing of the diaphragm, the flow could be controlled and a proportioning could be carried out. Diameter 50mm with 450mm according to model. Hand drive operation, motorized electric or pneumatic. Material: aluminum or stainless steel.
The valve with diaphragm series JS was especially designed to seal on chutes of Big-Bag (partial draining). Body of valve notched for an optimal regulation of the flow, partly lower fixing out of standard. Simple diaphragm out of nylon or nylon polyurethane. Diameter 300 mm and 375 mm
Material of the body: Aluminum
|
|
|
|
|
|
VORTEX® IRIS VALVE
The patented Vortex® Iris Valve is designed specifically to handle dry bulk solids in gravity discharge of free-flowing material from bins, bulk bags, chutes, and hoppers.
Traditional iris valves rely on plastic components to actuate the valve that can easily break during use. The Vortex® Iris Valve is designed with stainless steel control rings and metal trigger locks and handles to eliminate these problems, enabling you to meet your objectives by increasing production, while decreasing labor and equipment costs.
Valve Specifications
- Size/Bore Options: 50mm, 75mm, 100mm, 125mm, 150mm, Diameters
- Media: Powder, Pellets, Granulars
- Connection Options: Flanged, Tube Stub, or Ferrule Couplings
- Media Temperature: 100°C continuous to 120° C intermittent service.
- Media Pressure: 0.1 MPa, Gravity Only
- Metal Construction Options: 304 or 316L Stainless Steel, and/or Aluminum
- Sleeve Material Options: Nylon, Teflon, Urethane, or Rubber
- Drive/Actuation Options: Infinite Position Hand Lever or Quick Lock Hand Lever
- Position Detection: Visual
- Compliance/Approvals: CE, FDA
- Industry Use: Plastics, Petrochem, Chemicals, Foods, Minerals, Textiles, Agriculture
|
|
Pressure valves
As screw-in cartridges or intermediate plate valves
Excellent pressure adjustment over the entire operating range
Pressure relief valves
Unloading valves
Pressure reducing valves
Proportional pressure relief valves
|
|
|
|
|
|
KOFLOC 6600/6800
The KOFLOC Pressure Regulating Valve MODEL 6600 SERIES is a compact, lightweight precision pressure regulator with superior repeatability to provide reliable and speedy regulations. MODEL 6600 SERIES is a non-bleed valve and has successfully been put to rigorous leak tests and is designed as a panel mount unit for easy assimilation into sensitive analytical equipment. Components are carefully cleaned before assembly, making this product ideal for used as a component of high-sensitivity instruments for analysis or other R&D activities. The MODEL 6800 SERIES is a type of check valve to obtain a constant level of pressure upstream of the valve. It makes it easier and speedier to control pressure in the tank with a large buffer, and siphoning, operations that were rather difficult with a secondary control valve commonly in use.
FEATURES
♦ Compact
♦ Low-cost
♦ Quick and easy control
♦ Clean, grease-less valve
♦ Leak-integrity
APPLICATIONS
♦ Tank-pressure control
♦ Gas mixing
♦ Research
♦ Analytical equipment
♦ General gas control
♦ Precision pressure control
|
|
Series PC (Pressure Compensated)
General Description
These valves are designed to regulate flow at a selected rate then maintain this flow constant within ?5% as inlet and outlet pressures may vary. However, changes in fluid temperature will prevent flow from holding constant.
There are 2 types of Series PC valves. Series PCM valves can be adjusted for required flows after being installed. Series PCK valves are factory-set for a specified flow and are not adjustable by the user
|
|
MODELS : VR1E02 (PANEL MOUNTED/SUB-PLATE)
VR4* (SUB-PLATE / THREADED/CARTRDIGE)
VR5* (FLANGE MOUNTED)
VVV01 (SOLENOID VENT VALVE)
SIZES - 1/4 " TO 1-1/2"
FUNCTIONS : REDUCING / RELIEF / SEQUENCE / UNLOADER
FLOWS : 1.7 - 159 gpm / 6.6 - 600 lpm
|
|
LS-V25s
Proportional Pneumatic Control Valve
The LS-V25s is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
|
|
Other valves 
