|
|
| Products 241 to 270 of 317 |
AMOT valves are used for accurate temperature control of liquids in diverting or mixing service. Three distinct temperature control valve groups are available:
3-Way Temperature Control Valves, electric or pneumatic actuated For tighter temperature control, remote sensing, and low pressure drop.
3-Way Thermostatic Valve, self powered Traditional "AMOT" valve with internal sensing temperature elements. For 2-way valve, block port "B" on valve.
2-Way Thermostatic Valves, self powered Ideally suited to minimize water usage ("Water Saver") in a city or river water cooling system used on compressors, oil coolers, tank heating and cooling service. For larger flow rates, use a 3-way valve with port "B" blocked off.
Typical applications include temperature control of cooling or heating systems, lube oil systems, cogeneration systems, heat recovery loops, process control, and other mixing or diverting temperature control systems.
|
|
|
The 971 Series is a 10-inch (DN 250) top-entry, pilot-operated pressure reducing regulator that uses the combination of the PRX Series and Type SA/2 pilot supply regulator as its piloting system to give a operating pressure range of 7.3 to 1015 psig (0,5 to 70 bar). The 971 Series can operate at high inlet pressure up to 1450 psig (100 bar) and high-pressure drops.
|
|
Thermostatic Expansion Valves :
Thermostatic Expansion Valves are used to meter the flow of liquid refrigerant entering the evaporator at a rate that matches the amount of refrigerant being boiled off in the evaporator. The valve provides a pressure drop in the system, separating the high pressure side of the system from the low pressure side of the system, allowing the low pressure refrigerant to absorb heat onto itself.
|
|
Specifications
0-90 psig adjustment range
Bypass bleeds available
Construction: Brass, copper and stainless steel
Optional external equalizer
U.L. recognized for maximum operating pressure of 500 psig high side, 225 psig low side
|
|
|
Thermostatic Expansion Valves are available as parts programme, i.e. with separate valve body and orifice assemblies, or as complete valves (fixed orifice).The category also contains Thermostatic Injection Valves.
|
|
|
|
|
|
Thermostatic expansion valves are designed for a wide range of air conditioning, refrigeration, heat pump and chiller applications.
Our integral valve line includes valves for commercial and refrigeration applications, as well as heat pump and residential applications. The "Take-A-Part Series" valves are the answer to your unique needs, available for almost any type of application, temperature range, or any known refrigerant. We also offer a complete line of specialty valves. Consult us for your specific system requirements.
The Thermo® Expansion Valve is a precision device designed to regulate the rate of refrigerant liquid flow into the evaporator in the exact proportion to the rate of evaporation of the refrigerant liquid in the evaporator. The amount of refrigerant gas leaving the evaporator can be regulated since the Thermo Valve responds to the temperature of the refrigerant gas leaving the evaporator and the pressure in the evaporator. This controlled flow prevents the return of refrigerant liquid to the compressor. The Thermo Expansion Valve controls the flow of gas by maintaining a pre-determined superheat.
|
|
Festo’s Tiger Classic valve series has proven itself millions of times - it’s robust and reliable, even under extreme conditions. A valve for many applications, and a comprehensive range of options.
Flow rate
G1/8: 500 l/min.
G1/4: 800 l/min.
G1/2: 3700 l/min.
G3/4: 7500 l/min.
JMFH, MFH: without solenoid coil and plug socket (F solenoid coil)
Voltages
- 12 ... 48 V DC
- 24 ... 240 V AC/50 ... 60 Hz
- Explosion protection Variants
3/2-way valves
- Normally closed or normally open
5/2-way valves
- Single solenoid with mechanical or pneumatic spring return
- Double solenoid valves
|
|
LEYBOLD KF valves are available with any of three drive systems and three types of body having a nominal width of DN 16, 25 and
40 KF
Advantages to the User
Isolation component with handy and easy to operate four position rotary knob
Permits careful venting of systems
Suited as a manually operated variable leak valve to roughly control gas flows
Leak tight in both directions up to a pressure of 2.0 etc. 1.5 bar and easy to open
Installation in any orientation
|
|
MANUAL :
two and three way for vacuum interception and distribution
TRISEA :
versions with horizontal clapet or with vertical spring return, they serve for automatically sealing a vacuum circuit
PUSH VALVES :
with a pin or ball valve shutter and combined with the various suckers, they start suction only on contact with the object to be handled
SHUT-OFF VALVES :
fitted on the suckers they automatically shut off suction in the case of leaks, avoiding the loss of vacuum on the correctly gripping suckers
|
|
|
|
|
|
A&N offers three (3) varieties of vacuum valves: poppet valves, gate valves, and ball valves.These valves are designed to perform fully opened or closed and therefore are not intended for flow control. A brief description of each style of valve follows:
Poppet Valves are available in three (3) body styles: 90° Angle, In-Line, and Angle In-Line. These valves are made of a body, actuator, and internal poppet. A pneumatic, bellows-sealed actuator transports the poppet linearly. The poppet seal is typically elastomeric therefore base pressures down to 10^-8 Torr may be achieved. An all-metal version, with copper bonnet and valve seat, is also available.
Gate Valves provide straight-through, unimpeded flow with the smallest valve body profile. Gate valves are ideal for space- constrained applications that require maximum conductance. An elastomer seal is compressed against a sealing surface providing base pressures down to 10^-8 Torr.
Ball Valves offer straight- through, unimpeded flow with minimal space requirements and ¼ turn actuation. Because of its unique valve seat configuration, the ball is wiped clean as it is opened. As a result, these robust valves are less sensitive to particulate contamination and are especially useful in dirty vacuum applications.
|
|
Differents kinds of vacuum valves:
- Angle and Inline Valves (VAH, VIH, VAP, VIP) DN16, DN25, DN40
Manually Actuated
Pneumatically Actuated
- Solenoid Actuated Angle Valves with ISO-KF Flanges (VAM) DN16-40
- Angle Valves (VAH, VAP) DN63
Manually Actuated
Pneumatically Actuated
- Manually Actuated Angle Valves with CF-Flanges (VAH) DN16-63
Standard
All-metal
- Angle Valves (VAH, VAP) DN100
Manually Actuated
Pneumatically Actuated
- Angle Valves (VAP) DN160
- Pneumatically Actuated Angle Valve (VAP) DN250
|
|
The Vactrap™ is a check valve that "traps" the vacuum pressure in vacuum systems for an indefinite period of time in non-porous applications. The object can be handled with an extremely high degree of safety even if the supply of compressed air should be cut off, if a pump failure should occur or if the emergency stop should be activated, thus preventing the object from being dropped.
The Vactrap™ is also equipped with a built-in blow-off check valve to provide quick release of the object with compressed air supplied from the outside. The Vactrap™ can be used in an existing centralized vacuum system with external blow-off possibilities and it is also possible to get the Vactrap™ with an integrated Pi12-2 COAX® cartridge for decentralized systems.
|
|
|
The Pfeiffer Vacuum product portfolio contains several valves in numerous designs, e. g. manually, electropneumatically or electromagnetically operated.
|
|
|
Connections, Flexible devices, Valves, Clamps for: Watering, Compressed air, Welding, Irrigation, Fire, Hydraulics
|
|
Stainless steel valves
Two complete ranges of stainless steel products, for all industrial applications
"Industry" ranges(ISO, Metric, ANSI...)
- Ball valve in S.S.316, plain ends or threaded (BSP or NPT), with flanges, between flanges,
2 or 3 ways, manual or automated
- Butterfly valve between flanges, cast iron / S.S.316, manual or automated
- Knife gate valve, diaphragm valve, globe valve, electrovalve...
- check valve, non-return valve, filter, stainer, sight glass...
"Food & beverage" range (SMS, DIN, Tri-Clamp, Macon...)
- Butterfly valve in S.S.316L, welding ends, threaded ends, male/female, manual or automated
- seat valve, stop or divert valve...
- check valve, safety valve, filter, sight glass, sampling valve...
We also have a range of products in brass, copper, bronze, cast iron...
|
|
30 Series: Shutoff Valves
Globe or angle pattern
Built-in metallic stop prevents over-torquing - reduces seat wear
30-1100 Series: available with metering capability (long stem optional)
Bi-directional flow (all models)
CC Series: Metering Valve
Precise control at very low flows
20+ turns from shutoff to full open
Non-rotating stem reduces seat wear
VA/VG Series: Air Operated ON/OFF Valves
Normally open or normally closed
Balanced main valve - reduces required actuation pressure (30-60 PSIG)
Compact package
Toggle actuate optional
Solenoid valve actuation (Pneumatic assist) optional
VJ Series: Cartridge Valves
Bi-directional flow
Built-in metallic stop
Globe or angle pattern
O2 compatible design
|
|
|
|
|
|
Top Line Process Equipment Company continues to be a leading supplier of quality hygienic stainless steel valves for over 40 years.
Sanitary Stainless Steel Valves such as:
Butterfly, Ball, Diaphragm, Sample, Divert, Plug, Ball Check, Disk Check
Top Line Process Equipment Company continues to be a leading supplier of quality hygienic stainless steel process equipment for over 40 years.
Our commitment to fine craftsmanship, high quality, unequaled service, and competitive pricing has led to our company's successive years of growth which has placed us among the leaders in our industries.
Top Line Process Equipment Company, originally founded in Janesville, Wisconsin in the 1950's as a provider to the dairy farm industry, is headquartered in Bradford, Pennsylvania, USA. Top Line services the Food, Dairy, Beverage, Cosmetics, Pharmaceutical, Biotechnology and electronics industries.
Top Line primarily markets its products to the Food, Dairy, Beverage, Pharmaceutical, and BioTech Industries through a world-wide network of distributors, large OEM's, and National Accounts. Top Line's involvement with its distributors includes not only providing competitively priced products but to support an ongoing line of communication between ourselves and the ultimate end user of the product. Top Line sales people travel regularly throughout the country making company and product presentations to our distributors and to their processor companies for purposes of specifying, recommending and outlining the benefits of Top Line products. Full factory support is provided to our customers along with customer and project leads.
|
|
Electronic Auto Drain Valve
Electronic Auto Drain
Bossmanfilter have set the industrial standard on condensate autodrain drainage. With its high reliability, and designed to handle even the most oily condensate for all compressed air applications.
Additional Features
Easy replacement of timer card only and not full assembly
Longest drain time frequencies for saving compressed air energy.
Individual application capacities like receivers, filters and separators etc.
Longer service life by way of having Built in 'Y' type strainers.
Location
Air receiver, After Cooler, Moisture separator, Filters, Dryers etc.
|
|
Type:
Gate valves (Design according to API600, ANSI B16.34 or BS 1414)
‘‘Through conduit gate’’ valve according API 6D – B16-34
Gate valves for Navy application
Jacketed gate valves
Cryogenic gate valves
Gate valves for Oxygen service
Bellows sealed gate valves
Parallel slide gate valves
Pressure sealed bonnet gate valves
Custom made gate valves
Design: API600 – B16-34 – API 6D – API 6A (5000 & 10000)
Nominal Sizes range: DN15 (1/2”) to DN650 (26”)
Pressure rating range: PN10/PN16 – Class 150 to Class 2500
End connections: flanges, socket welding, Hub ends,…
|
|
Offshore
Pisler supplies a multiplicity o( valves in different materials for offshore usings. Main application is the service and maintenance area as well as the building of ships and platforms. For subsea application the valves can be fitted with special systems for robotic operation.
|
|
Swagelok® Valves and Manifold Valves
Valves: Ball, Bellows-Sealed, Bleed and Purge, Check, Diaphragm-Sealed, Manifold, Metering, Needle: Shutoff and Regulating, Pinch, Quarter-Turn Plug, Relief, and Sample Stream Select
Integral tube fitting ball valves in sizes up to 2 in. and 50 mm
Flanged process valves up to 3 in. (DN80)
A large variety of special application valves
|
|
| ... products without technical information |
| |
|
|
Other valves 
