|
|
Mass production, all products of the same quality, subsequent components identical.
Extraction of harmful substances like dust, steam and solvents
Our pull-ring system with U-shaped seals can be used in almost every line of business because it is tight against condensed liquids.
Certificates "shock explosion proof up to 3 bar overpressure"are available on request (angle flange connection is shock explosion proof up to 10 bar).
|
|
|
|
|
|
The Exel pull-winding, co-winding and prepreg wrapping techniques enables the manufacture of high-performance composite tubes while optimizing the structure and minimizing the use of raw material. The wide range of Exel tubes from 3mm to 300mm diameter, together with suitable wall thickness, different types of reinforcement and resins allow you to have an optimized product according to your needs.
The choice of reinforcing materials is determined by the technical demands, such as weight, stiffness and strength, and its ability to insulate heat and electricity. Glass fibre is a widely used reinforcing material that gives the product the following properties: light weight, durability, stiffness and is readily pigmented. Carbon fibre enables the manufacture of even lighter and stiffer tube. It should be noted that carbon fibre conducts electricity. Although carbon fibre tubes are black, they can be coloured by introducing a glass fibre surface layer. A hybrid is a product that combines more than one material. It is thus possible to optimize lightness, stiffness, strength and costs.
Tubes usually have a non-wowen surface, and the surface resin is pigmented throughout. The pigment can be selected from numerous standard colours, for instance, according to the RAL or PANTONE colour codes. If requested, the colour can be made to the customer’s requirements. Tubes may also be given a spiral surface. The customer’s name or some other information may be printed on the tube surface.
Exel quality and environment policy complies with the requirements of the standards ISO 9001:2000 and ISO 14001 (Bureau Veritas Certification).
|
|
Round pipes of the company h.hiendl GmbH & CO. Kg
Hiendl of round pipes are made from natural fiber strengthened composite materials of the Hiendl NFC® of material system as well as of purely synthetic thermoplastics (polypropylene, polyethylene, ABS, PVC, PP). The selection of the material is determined in each case by the characteristics, which are optimal for application. The universal products of Hiendl NFC® and of conventional plastics are manufactured for the construction industry, the interior fittings, the laboratory, charge, measurement and the furniture making. With Hiendl NFC® the fossil raw materials common with plastics are replaced to substantial portions by regenerating raw materials. This reduces the load of the atmosphere by CO2-Emissionen. In the comparison e.g. to aluminum - also this material can be replaced by Hiendl NFC® - consumption at primary energy is considerably smaller in the production and processing.
|
|
|
|
|
|
GALVA-GARD®, "The Ultimate Corrosion Fighter" is a prefabricated, preinsulated, fiberglass clad galvanized steel conduit system for low to high pressure steam, HTHW and general fluid transportation.
GALVA-GARD® the original "corrosion fighter" just got better. As always, galvanization is applied to the exterior, as well as the interior of the outer pipe providing a clean, corrosion resistant system for underground heat distribution. Now PERMA-PIPE® has added a thick cladding of fiberglass reinforced plastic on top of the galvanized system for maximum resistance to adverse corrosion and environmental conditions. There is no need for cathodic protection. The outer conduit is clad with our filament wound fiberglass cladding 100 mils thick and designed to withstand a 35,000 volt holiday test. GALVA-GARD® is a smooth wall, hot dipped galvanized, 10 gauge steel conduit. Single or multiple steel carrier pipes can be insulated with any type of pipe insulation. We recommend mineral wool that has passed a certified boiling test. Other options for this piping system include a Energy Loss Detection and Location system and electric heat tracing.
- Temp Range: 250°F to 750°F (standard), above 750°F (special)
- Max Pressure: Determined by the carrier pipe selected
- Pipe Sizes: Nom. Diameter ½" - 44", Nom. Length 20' and 40'
|
|
Product Details
Product Code: USH33
Product Description: 82mm U/Ground Single Sckt T/Cotta (1/20)
Brand: Polypipe
Colour: 82mm U/Ground Single Sckt T/Cotta (1/20)
Material: PVC
Product Dimensions
Outside Diameter: 82
|
|
|
Ductile iron pipes have the corrosion resistance of cast iron and almost the same strength and ductility of steel. Because of their high reliability, ductile iron pipes are widely used in pipelines to convey potable water, sewage water, agricultural or industrial water, gas, etc. Recently, there has been a strong demand for earthquake-resistance ductile iron pipes, especially those employing NS-type earthquake resistance joints, with about 50 percent of our current domestic-oriented shipments being earthquake-proof piping.
|
|
The Film Manifold consists of several layers of resin film bonded together
in which fine channels are engraved. It is much smaller and lighter than
glass or resin block manifolds and can be used in microfluidic applications
such as chips or reactors. It is bendable and temperature control of the
channels is easy. Our miniature valves etc. can be mounted on the film
manifold.
Maximum dimensions: 250mm x 250mm
Material: Polyimide, Polyethylene naphthalate
Minimum channel width: 50 ìm
Available layer thickness: 25ìm, 50ìm, 75ìm
|
|
Fire Protection Sleeves
Designed to avoid the expenses of fireproof ducting, the sleeves are efficient and cost effective.
Two semi-circular metal shells are lined with intumescent material that when heated expands making a fire barrier.
|
|
- Stainless steel pipe
- Diameters 22 to 100 mm (3/4'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
Novaporte RP
Flat Inspection door. Steel. Stainless steel.
Natural rubber seal
Smooth convex outside cover without retention. 180° opening
Constant closing pressure by spring assembly
Double bottom, smooth convex inside without retention (DG version)
Fast opening and closing by toggle fastener with possibility of locking
Flat welding lugs
|
|
|
|
|
|
The High Capacity Rainwater System
The 115mm x 75mm Semi-elliptical gutter system, and 68mm diameter downpipe system is available in brown, white, grey and black. This system is extremely efficient, and can reduce the number of required downpipes in many installations, thus reducing costs dramatically.
Deepstyle
Deepstyle's high capacity nature provides a very efficient system for the drainage of large roof areas, whilst still providing a discrete unobtrusive rainwater system. In fact Deepstyle offers an increase of 50% in flow capacity when compared to the 112mm Roundstyle System. The high capacity nature of Deepstyle has the potential to reduce the number of downpipe and drainage runs required. This speeds installation and can reduce overall costs dramatically.
The system is characterised by an easy fix clip system, which facilitates simple installation whilst external fixing lugs allow easy access for cordless power tools. Deepstyle is fully compatible with other leading deep flow systems.
|
|
Half Round Rainwater
RL140B: 110mm Large Hopper Head Black
RL428B: 110mm Shoe Black
RL600B: 150mm X2M H/Round Gutter Blk 1/255
RL602B: 150mm H/R Gutter Union Bracket Blk
RL603B: 150mm X90Deg H/R Gutter Angle Black
RL605G: 150mm H/R Gutter Running Outlet Gry
RL609G: 150mm H/R Gutter Fascia Bracket Gry
RM325B: 50mm Round Downpipe Connector Black
RM328W: 50mm Round Downpipe Shoe White
RR106G: 112mm H/R S/End Running Outlet Grey
|
|
Metal inspection cover and opening window
Metal inspection cover and plexiglas opening window
Seal
bis - Window seal
Seal on base
Based to be fixed by screws or crimped by 4 fold down tabs
Smooth convex outside cover without retention. 180° opening
bis - Smooth outside Plexiglas window. 180° opening
Fast opening and closing by safety clip
Four dia. 7 holes on dia. 185 for attachment by M6 screws
Four fold down crimping tabs
Adaptable support sleeve on tube
Base - Adaptable collar to be welded on sleeve
Special base to be crimped on collar
|
|
Novaporte RC
Rotatable inspection door with collar. Steel. Stainless steel
Natural rubber seal
Rotatable base with collar
Smooth convex outside cover without retention. 180° opening
Constant closing pressure by spring assembly
Double bottom, smooth convex inside without retention (DG version)
Fast opening and closing by toggle fastener with possibility of locking
Welding collar
Clamping collar
|
|
Features :
- Use with non-cryogenic fluids and gases
- Three mounting styles
- Custom configurations available
- Units with VCR® fittings
- Stainless steel construction
|
|
|
|
|
|
Liquid Feedthroughs:
Nor-Cal's product line of liquid and liquid nitrogen feedthroughs includes the most commonly required for general, high and ultrahigh vacuum applications. Tubing is .25 and .375 inch OD, type 304 stainless steel with CF or NW flanges. They are available without fittings or terminated with industry standard Swagelok® or Cajon® VCR tube fittings. Maximum bakeout with CF flanges is 450°C and 204°C with NWs. Vacuum ranges are 10-11 Torr and 10-8, respectively.
Watercooled liquid feedthroughs are a cost-effective and reliable way to introduce water into a vacuum system. The .035 inch single wall tube construction is designed for the transmission of water as a cooling agent.
Liquid nitrogen feedthroughs are constructed with dual and coaxial tube geometries. This thermal barrier effectively reduces condensation and ice buildup on the atmosphere side of the feedthrough around the mounting flange interface, protecting the seal's integrity. This is necessary because of the extreme thermal gradients encountered with liquid nitrogen.
Swagelok® stainless steel tube compression fittings provide a leakproof, torquefree vacuum seal by swaging the stainless steel tube to which they are mated. They require no gaskets.
Cajon® VCR stainless steel tube compression fittings properly handle rapid makeup in tube, pipe and welded vacuum systems. These zero clearance fittings make them the perfect installation solution when space is a problem. Compression of a removable copper gasket creates a vacuum seal between air and process sides.
|
|
|
|
|
|
The LFT series of feedthroughs are used for the transfer of fluids (or gases) through a Conflat flange into, or out of, a vacuum system. Typical fluids transferred include water, Freon, or liquid nitrogen.
The LFT feedthroughs comprise one or two separate stainless steel tubes, each terminating in a UHV leak tight connection on the vacuum side of the LFT. Several sizes of tube bore are offered to fulfill different requirements. All of the LFT's have been designed with a thermal break on the atmospheric side of the tube. This comes into action when using liquid nitrogen as it forms a long heat path between the tube and the mounting flange. This results in less heat being absorbed by the liquid nitrogen (reducing losses). It also results in less cooling of the mounting flange which means that less condensation forms around the conflat flange. This reduces any corrosion that may form in this area when used over a long period of time, and so reduces the chances of contamination or leakage occurring.
Features :
- All stainless steel construction
- Wide range of styles with 0.5 inch or 0.25 inch tubing
- Special internal UHV connections
- UHV compatible
- Bakeable to +450 ºC
- Internal TIG welding
- Use at 10-11 mbar
|
|
Pressed segments with small radius for bulk good handling and pressed bends (with good flow characteristics) with a radius twice as large as diameter (up to 400 mm) for exhaust air/dust extraction plants.
Mass production, all products of the same quality, subsequent components identical.
|
|
Skimmer
The Dantherm Filtration Skimmer is a high volume coarse particle pre-separator, developed particularly for the asphalt industry but equally suitable for coarse separation of particulate matter in flue gases from metal melting and similar processes.
Key features
• Typical separation of particles larger than 63 micron
• Wide range of airflow volumes up to 100,000m3/h
• Adjustable vanes to optimize separation ratio
• Incorporates discharge hopper with various outlet options
• May be supplied in tandem with FS filter to save space and installation time
• Suitable for higher temperature operation
Typical applications
• Asphalt manufacturing processes
• Metal melting flue gas cleaning
|
|
|
Nylon tubing is a popular choice for low pressure pneumatic applications because of its combination of flexibility and toughness. Nycoil uses a heat and light stabilized, very flexible high grade Nylon 12 compound that yields the finest quality tubing available. Some of the qualities of tubing extruded from the Nylon 12 raw material are good chemical resistance, low water absorption and superior dimensional stability. Nylon is the most recommended tubing material for all types of pneumatic circuits.
|
|
|
|
|
|
XTRU-THERM®, our "State of the Art" preinsulated piping system for fluids from cryogenic temperatures up to 250ºF. The extruded HDPE jacket results in a completely bonded system that moves as a single unit for maximum efficiency and service life.
XTRU-THERM® is a process driven product, developed to eliminate problems inherent in foam injected systems. The pipe is insulated using a special spray applied continuos feed insulating process which works in line with our extruded high density polyethylene plastic material. The JACKET remains flexible at low temperatures and has a higher temperature rating than PVC. The HDPE jacket has been specifically designed to bond to the insulation. Designed for both above and underground insulated pipe applications. The hardness, tensile and flexural strength, toughness, diameter and thickness of the jacket are controlled.
The foam insulation is spray-applied and rises, unrestricted, to its final thickness. The free rise allows cell structure of the foam to be uniform in all directions. Because the foam is spray-applied and not injected, XTRU-THERM® is guaranteed to be 100% void-free. The blowing agent (HCFC, a gas that expands the foam and creates cell structure) does not dissipate from the cell like other water-based agents. Therefore, the cell structure and thermal value is maintained and the foam will not shrink.
- Temp Range: -320ºF to 250ºF
- Max Pressure: Determined by the carrier pipe selected
- Pipe Sizes: Nom. Diameter 1/ 2" - 36" (standard), Nom. Length 20' and 40'
|
|
- Stainless steel pipe
- Diameters 22 to 100 mm (3/4'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
Tyco Fire Suppression & Building Products' support systems are a result of close co-operation between manufacturer, engineer, distributor and customer. The support systems range comprises:
- Unistrut metal framing products and the new Kwikstrut fittings
- Wopf pipe supports
- Suspension fasteners
- Electrical supports including cable & basket trays and cable ladders.
We can assist you with the design of your installation, help with material take-off and selection of the right product for the right application. If you have a large project, ask for our software calculation package.
|
|
Tyco Fire Suppression & Building Products' UNI Channel systems have been recently reviewed into one comprehensive product line that can offer solutions to every construction issue. As well as a range of conventional fittings, you could choose our fast fix system, saving you time and money.
The UNI Channel system offers 4 channel types, varying in thickness and produced in different lengths. Imprinted length markings and serration inside the channel to ensure a better grip of the channel nut have been introduced, and the development of a new Kwik-Fix nut allows fast installation.
- One range of channels can be used conventionally or with the fast fix system
- One type of Kwik-Fix nut for all channel types
- Complete range of fittings and and accessories for support structures
- Accessories for making beam or concrete connections
|
|
SONIC PIG LOCATOR
As is the case with the SLDS system, the signals leave from a point (in the SLDS case, the leak) and move in both directions towards the adjacent acoustic sensors.
In the case of the SPL – SONIC PIG LOCATOR – the sonic signal’s “starting point” is the PIG itself, as it moves in the pipeline. The operator can follow the PIG’S movement in the pipeline with great precision. If the PIG gets stuck in any pipeline dent, curve, valve or in any other restriction, the acoustic emitter installed in it will issue signals in a frequency warning the PIG is immobilized at that point, allowing for immediate rescue actions.
|
|
SONOPIPE 12, the non-intrusive ultrasonic pig signaler, was developed for the detection of pigs in pipelines. It controls the passage of cleaning- and testing pigs in pipes for oil, liquid gases and water.
The advantage of this easy and reliable method is the outside coupling of the sensors at the pipes, so there is no wear. Furthermore, environmental risks due to dangerous holes in pipeline walls, as in systems with mechanical pig detectors, belong to the past.
The installation as well as the set up are easy and can be carried out during line operations. The sensors are certified after ATEX.
|
|
|
|
|
|
OLCOMPONENTS is the new product range launched by Olmark, that includes:
- BLOCK PIPE CLAMPS in polypropylene, polyammide or aluminium for single, twin or multiple pipes. Available series: Standard (rubber insert version also available) suitable for pipes with O.D. from 6 to 120 mm; Heavy (rubber insert version also available), suitable for pipes with O.D. from 6 to 168 mm; Twin, suitable for twin pipes with O.D. from 6 to 42 mm. All Olcomponents block pipe clamps can be equipped with cover and base plates, mouting rails and accessories for overlapped clamps.
- STEEL BALL VALVES wuitable for working pressures up to 500 bar, available in the following versions: two or three valves, flanged or MINI. Broad range of handles in zinc, stainless steel or aluminium, and in different shapes: straight, bent, short. Available diameters: from 1/8" to 1"1/4.
- QUICK-RELEASE COUPLINGS for all hydraulic applications at medium, high and very high pressure. Available series: ball valve, poppet valve, flat face and screw-on. Available materials (depending on the series): steel, stainless steel and brass.
All OLCOMPONENTS products meet most important international technical standards of the sector.
|
|
|
|
Pipes, Tubes, Accessories
