Welding consumables

The FluxPlus™ manufactured by Nordson is a paste flux that has been developed to be used specifically for dispensing and reflowing of solder paste. It is available in various types such as The No Clean incorporates rosin, solvent, and ...

The PrintPlus solder paste can fill up the apertures with zero voids and little or no slump, making it well suited for Surface Mount Technology applications, from stainless steel soldering to the assembly of flex circuits. It is available ...

The SolderPlus® Dispensing Solder Paste offers premium dispensers for past formulation that is supported by a good set of solder application from the provider. Solder paste are fine pitched, low residue paste with increased wetting that ...

The Décap Express 840, fabricated by Express, is a flux intended for roofer that is suitable for newly developed metals. It is capable of holding a 320 ml capacity. In addition, this device can be use for tin soldering purposes.

The Super Decap Express 845 is a tin solder flux with a 33% or 28% tin/lead brazing alloy that allows handling of a variety of oxidized metals. This product, which is available in 320 ml containers, is the ideal solution in treating roofing ...

Flux are used to reduce the oxides that form whenever hot metals comes in contact with air. The Flux 850 is highly recommended for pre-weathered zinc. It comes in 250 mL. It is highly ecological and can be used on objects infused with ...

Wide slot nozzle push-fit Various wide slot nozzles, angle nozzles, tubular nozzles and nozzle adapters for our heat guns, welding guns and hot air blowers. Nozzle 20 mm flat (Item no.: 4002) Nozzle 20 mm flat, 15° angled, for ...

Tubular nozzles Nozzle 5 mm round (Item no.: 4000) Nozzle 5 mm round 150 mm length (Item no.: 4000.V) Nozzle 15 mm round (Item no.: 4005) Nozzle M 10 / Adapter (Item no.: 4007) Nozzle M 14 / Adapter (Item no.: 4008)

Our speed welding nozzles and tacking nozzles in a variety of sizes for processing plastic welding wire; can be slid onto a 5mm tubular nozzle or screwed onto an M10 nozzle adapter. Speed welding nozzle 5,7 mm triang, push-fit on 4000 ...

SparkTrap reliably prevents sparks, coarse particles and even cigarette butts from entering the filter system - with nearly 100 percent efficiency. By attaching this pre-separator, filter life is also increased by up to 300 percent. The ...

They're lightweight, rugged and completely portable...easy to load, easy to carry...ready to provide low cost control of welding quality in the shop or in the field. Reduce operating costs by providing your welding operators with fast ...

They’re lightweight, rugged and completely portable...easy to load, easy to carry...ready to provide low cost control of welding quality in the shop or in the field. Reduce operating costs by providing your welding operators with fast ...

Welding electrodes made of tungsten, molybdenum and their alloys are particularly suitable for welding highly conductive materials such as copper. They are used in the following processes: Spot welding, Roller welding, Projection welding, ...

Resistance Welding Electrode Electrode Tip / Cap / Shank / Holder Bending Tip & Swivel Tip Ceramic Guide Pin Nut Welding Electrode Copper Arm with order-made

Applicator: Syringe. Formulation: WW Gum Rosin, Diethyene Glycol Dibutyl, Dymerex Rosin. Use: Electrical soldering Notes: General purpose flux for soldering electrical connections. Use CAIG NO-CLEAN Soldering Flux, TYPE RSF-R39 for ...

Applicator: Jar Formulation: WW Gum Rosin, Diethyene Glycol Dibutyl, Dymerex Rosin. Use: Electrical soldering Notes: General purpose flux for soldering electrical connections. Use CAIG NO-CLEAN Soldering Flux, TYPE RSF-R39 for precision ...

Applicator: Jar Formulation: Rosin (CAS 8050-09-7), proprietary ingredients Use: Precision electrical soldering Notes: Precision soldering of electrical connections for non-clean applications. Use Soldering Flux, TYPE RSF-R80 for ...

Orifice diameter: 15 mm

Product Description welding nozzle A10.5 for 15mm sheets

Product Description welding nozzle A3.5 for 5mm sheets

Product Description welding nozzle A5.6 for 8mm sheets

Available as threaded or non-threaded and come in many different shapes and sizes for...

• Demonstrates excellent wettability even with Ag-free solder. • Suppresses the formation of solder balls. • Realizes a beautiful finish by using a clear and transparent liquid flux.

Splash-free through exclusive control even... • In a wide range temperature. • With laser soldering with rapid heating. • With various alloys.

Oxyturbo introduces a range of consumables with different functions according to the safety and welding operability requirements. The choice of coating is therefore very important and depends on the desired welding characteristics. Coated ...

Non-flammable, solvent based anti spatter, for use on site. Does not affect post welding operations. No silicones or flammable solvents. Anti-Spatter film is easily wiped away.

The HF32 electronics solder wire is based on a No-Clean flux and is available with lead-free and lead-containing alloys. It was developed for high requirements in conventional soldering and SMD soldering in industrial manufacturing as ...

EF160 Bio PV is a bio flux from Stannol‘s more sustainable greenconnect product range. By using renewable raw materials, a better ecological balance is achieved while maintaining the same high quality. According to DIN EN 16785 2, a 95 ...

Ecoloy Bi58Sn42 and Bi57Sn42Ag1 are low-melting solders with melting ranges around 139 °C. Compared to lead-free solders based on SnCu or SnAgCu alloys, the processing temperatures are lower and the thermal load on the PCB and components ...

● High quality rosin core welding wire. ● Composition Proportion: Sn 99.3%, Cu 0.7%. ● Soldering wire diameter: 0.5mm/0.8mm/1mm, gross weight: 50g, suitable for pocket. ● Melting point: 217℃~220℃. ● Easy to solder, smooth ...

This solder wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption. Removes up to four times more solder than the conventional wick . Residue left behind is halide free and non-conductive ...

● Non-corrosive, easy clean with IPA or wipe off with tissue. ● Best for soldering purpose. ● Easy to handle. ● Smooth flow. ● Low temperature for uses.

The carbon steel electrode (the tensile strength of the deposited metal is less than or equal to 500 MPa or 50 kgf/mm2) is suitable for welding of carbon steel and low-strength low-alloy steel. For low-hydrogen and iron-type electrodes, ...

For those requiring good plasticity, high impact toughness, good low temperature performance and strong crack resistance, alkaline or high toughness welding rods are used. For medium carbon steel or cast steel welding, ultra low hydrogen ...

Molybdenum and chrome molybdenum heat resistant steel electrodes are one of low alloy steels. It has a certain heat resistance in the working temperature range of 500 to 600 °C. In general, the welding performance of pearlitic heat-resistant ...