|
|
Ridg-U-Rak’s Push Back Rack (Push-bak™) uses a dynamic cart-on-rail system in which pallet loads are literally pushed back into the rack. When a pallet load is retrieved at the aisle, the deeper pallet load automatically advances to the aisle.
Push back storage provides a very desirable combination of high density and accessibility. Push-bak™ storage density equals that of drive-in storage, yet every lane can be accessed at all times. Any lane can be 100% filled from the aisle without affecting any other adjacent lanes above or below.
If you need to store a large number of pallets of one SKU for several months and then remove and ship them all as a seasonal product, a drive-in system is an efficient system. But, in most other cases, Push-bak™, or a combination of drive-in and Push-bak™, will be more effective. An analysis of your inventory list and inventory turnover data should be the first step in making the best rack selection.
|
|
LIFO Push-Back Pallet Storage System
Double Your Capacity Today with LIFO Push-Back Pallet Storage System
A Last In, First Out (LIFO) pallet storage system can double the capacity of a warehouse. This alternative to drive-in, static racks or storing pallets on the floor is ideal for freezer warehouses, food distribution centers and storage of medium-volume consumer goods.
Advantages of LIFO Push-Back System:
* LIFO inventory control per pallet, FIFO inventory control by storage lane
* Can store a variety of SKUs on different levels of lanes for easy product access
* Maximizes warehouse capacity/space utilization – Push-Back offers up to 90% more product storage than selective rack systems
* Available in 2,3,4,5, and 6 pallet deep styles
* Can be arranged as stand alone bay, or as a back to back system
* Available with a nested wheel cart or on series 2300 wheels
|
|
MODUL
Modular sliding storage box system for storage of all kinds of long objects. After unlocking the system, the storage box is pulled out by hand for about 15% of its length, after which the storage box should supported on the sliding support (VS), to enable it to be pulled out to about 95%of its length. When pushed in, the box is automatically locked in place. The unit can also be fitted with an optional roof structure (mezzanine). It is possible to sub-divide the compartments in the cassettes using adjustable pins.
|
|
Cantilever racks
Cantilever racks are particularly suited for the storage of long goods and bulky parts. This kind of storage system allows the arms to be horizontally inserted into the vertical columns. Despite the heavy loading capacity of the arm, this remains flexible and moves sidewards and upwards when hit for example by a forklift truck. Arms and goods remain undamaged. The columns are punched every 100 mm in order to fit with the sizes of your existing warehouse. The arms can be adjusted without any use of tools. The cantilever racks can be used one-sided or double-sided, many variations are possible.
Continuous storage space for an optimised space requirement
Columns height up to 9 mtrs (further heights are possible)
Arm loading capacity from 500 kgs up to 15 tons per arm
Arm lengths from 600 mm up to 2,500 mm
storage levels adjustable each 100 mm
suitable for forklift truck and crane handling
|
|
continuous storage space optimises your space requirements
space-saving storage of different sizes in only one storage level
no disturbing connecting columns
suitable for long material with different sizes and arranging of different single components in one storage level
different accessories like arm-bridges and grids for an optimal exploitation of the storage level
Economic through less material requirements
|
|
|
|
|
|
Pallet racks
OHRA pallet racks for individual solutions
bolted frames made of hot-rolled steel profiles for highest storage requirements
beams made of IPE-steel profiles with welded connection-elements guarantee a strong connection with the frame
easy assembly – only a few components
big storage levels, possible high loads for frames and beams
frames with adjustment grid of 100 mm
secure transfer of loads into the floor ground through solid foot-plates
Hot-rolled steel is flexible and keeps its advantages regarding the high vertical load and its static characteristics. Other pallet racks consist of cold-rolled sheet metal with 2 mm thickness which becomes unflexible even through light impacts. It can crease and loose its static figures. This is very important for the frames. Therefore our frames are made of hot-rolled steel.
Particularly suited for the storage of heavy, high-quality goods and the application in very robust, achievement-orientated and rough warehouse companies.
use of hot-rolled solid profiles
high security reserves, consideration of horizontal and dynamic forces
no reducing or optimizing of material to the burden of high security reserves
even impacts induced by a forklift truck get absorbed
payload of 15,200 kgs at a height of first shelf at 2,000 mm
|
|
PLATO
A very stable push-in pallet storage magazine for the storage of mainly plate material. The fabricated steel pallets are provided with fork pockets so they can be removed and transported by fork truck. The unit is of robust steel welded and bottled construction, capable of being dismantled, which can safely store packages without the usual wooden pallets. Removable safety pins are placed on all sides of the pallet to guard against slipping material during transportation to and from processing machines.
|
|
VERTO
Unit is for the vertical storage of plate material. It is fitted with bottom rollers to assist with the loading and retrieval of plates.
|
|
|
Dexion drive-in pallet racking combines the speed of throughput and access to individual pallets of conventional pallet packing but with increased use of the cubic space available. Used in conjunction with special purpose pallet handling equipment which may require guidance, by electronic wire or by steel rail.
|
|
NORCAN puts "Lean Manufacturing within reach"
Norcan developed new accessories making it possible to marry its aluminum system shaped with its range of covered tubes steel ABS and stainless Carenal.
These designs make it possible to profit from the advantages of the two systems: esthetics, the robustness, very good ageing in the time of the carrying aluminum structures shaped and flexibility at low cost out of tubes and rails with Carenal rollers for the organization and the functional part of the structures.
|
|
compact block storage
convinient storage
effective usage of space
last-in-first-out principle
Especially with drive-in racks you can see the advantages of the solid construction made of hot-rolled steel profiles for the columns. In particular, the columns do not require protection against collisions from forklift trucks, when driving into the rack.
|
|
The system allows you to gain space by eliminating access aisles. Available as drive in and drive through racking.
Drive in should be considered where bulk storage demands improved access, more control and more protection for the goods.
|
|
Cantilever racking is specially designed to store long items or items of varying length, such as metal beams, pipes, moulding, wooden planks, pipes, and metal and plastic sheets among other materials.
Depending on the height and weight of the merchandise, either light or heavy duty racking are available. Both can be fitted on one side of the structure only, or on both sides.
Advantages:
- Allows extra long items to be stored.
|
|
|
The cantilever racking META MULTISTRONG has proved of value with regard to the storage of long goods. The range includes small compact rack rows for light to medium heavy long goods and extends to super heavy duty racks for heavy bar and sheet materials. MULTISTRONG cantilever racks offer you a steady brand quality, numerous options for extensions and a quick access to the goods. By this way you increase your storage productivity.
|
|
The most robust system for hand loaded storage of tubes,
sections, profiles and panels etc...
- Cold profiled 15/10 galvanised frames
- 20 or 15/10 profiled steel arms adjustable every 50mm
- 1300 wide, 2100 mm high. 4 levels of arms + base.
|
|
|
For five decades, Dexion have saved space, saved time, cut costs, with products that – simply – do the job better than any others. Whether you need a simple run of tough steel shelving, or a complex mezzanine storage area, or something in between, you’ll find it in the Dexion range.
|
|
COMPATTA is a system of mobile shelves on rails, that by reducing service aisles to a minimum allows up to twice as much space to be used with respect to normal shelving systems. Handling can occur using a pushing, hand wheel or electromechanically operated system, whilst the closure system favours the protection against dust and unauthorised entry. The use of mobile dividers, drawers and pull out shelves, supports for magnetic filing and other accessories allows the best use of available space. The quality and experience of the hundreds of systems provided by ICAM make COMPATTA the best product available on the market.
Advantages
Maximum exploitation of space
Facility closing system
Protection against dust
Future expandability of filing system
Equipable with various accessories
Electromechanical version can be connected to the operating SW
|
|
Drive-in racking is ideal for homogeneous products with low levels of turnover and a high number of pallets per article type. This system offers the highest use of available space in terms of both area and height.
Advantages:
- Maximum use of available space (85%).
- Elimination of aisles between the racking.
- Rigorous entrance and exit control.
- Drive-in racking can generally accommodate as many article types as there are loading aisles.
Two management systems are available: the drive-in system, with only one access aisle, and the drive-through system, with access to the load from both sides of the rack.
The system is frequently used in cold stores (refrigeration and freezing) which require maximum use of space for the storage of products in a controlled temperature.
Drive-in racking can also be used in construction of clad-rack buildings whose most striking feature is that they do not require the existence of a building prior to construction.
|
|
Shelving for live picking is made up of slightly inclined platforms of wheels and rollers on which the goods are deposited at one end. They then slide down on their own until the far end, positioned at the exit aisle.
This guarantees the perfect turnover of the product, avoids interference in replacement and pick-up tasks and speeds up order preparation.
Advantages
- Perfect turnover of products (FIFO system - first box in, is the first box out).
- Higher numbers of article types in the shelving units.
- Reduction in order preparation time.
- More storage space.
- This storage system is ideal for a wide range of sectors, from warehouses storing mass consumer goods, pharmaceuticals, cosmetics, computer goods, spare and parts for cars amongst others.
Pick-to-light system
This automated system is connected to the warehouse management system for the preparation of orders without the need to raise manual paperwork. This reduces errors and increases the speed of operations.
|
|
|
|
|
|
In order to increase the profitability of your warehouse, the optimal use of existing capacities is necessary. Therefore customized solutions are required which often complete the whole concept by a clever combination of the shelving systems.
META flow rack systems proved their value where flexibility, performance and profitability is necessary.
The frequency of use compared to conventional rack systems is at approx. 60% and the economy of space is up to 30%.
Essential advantages of the META MULTILINE® flow racks:
- Higher storage capacity
- Increase of the transshipping performance
- Self-conveyance of goods
- Higher access possibility
- Reduction of transit times and working hours and thus cost savings
- Separate loading and unloading paths
- Improvement of the work flow
- Supporting rack construction from the proven META MULTIPAL® system
Whether you use META MULTILINE® S as flow rack according to the FIFO principle (First In First Out) or as push back rack according to the LIFO principle (Last In First Out), the pallets are always at hand.
Two service passages are maximum required and the storage room is reduced by 30% of the room, which is necessary for a conventional pallet system.
In META MULTILINE® L racks your goods are compactly stocked in transport containers. They flow automatically into the picking area and can be taken from here ergonomically.
|
|
CARENAL is a system of simple, flexible and economic construction composed of elements adapted for these applications by always seeking the practical and advantageous versions of a rational system.
Applications: dynamic storage FIFO (fixed and mobile), storerooms, work station, auxiliaries of the services industrial, service roads of assembly, various
For these applications the systems Kan Ban proved to modernize the work conditions and also to rationalize the methods of logistics.
|
|
effective usage of space
optimum filling degree
independent store-in and store-out; to be loaded from the front side and to be retrieved from the rear side
the goods advance through own weight, to the retrieval position
the ideal rack for commissioning tasks
|
|
|
A dynamic "first in first out" system to aid order picking and simplify handling from cartons to pallets
|
|
ShelfTRACK carton flow is the original full-width-roller track that replaces existing plastic wheel tracks. "Drop-in" design for fast, easy installation in your flow rack shelves.
ShelfTRACK full-width rollers provide total carton support and superior flow. Rugged steel side channels and axles, and aluminum rollers withstand tough handling in any environment. Backed by a Seven Year Warranty.
Maintenance-Free: ShelfTRACK eliminates the high cost of replacing damaged plastic wheel tracks without altering your shelves or rack structure.
Track Length: ShelfTRACK sections are available in "to-the-inch" cut lengths from 3' to 12'. To determine track length required, measure the length of the plastic wheel lanes to be replaced or measure the clear distance between the inside of the shelf's back angle and the inside of the front angle. Sections can be spliced end-to-end to create longer runs.
|
|
Among order picking installations that work according to the operator-to-goods principle, live storage is on the increase.
Higher investment costs are more than compensated by improvements in efficiency.
The subdivision of the total order picking area in several picking zones, the utilisation of sophisticated loading and retrieval technology and computer monitoring by modern warehouse management software make this storage/order picking system an economic benefit.
Advantages of the system
storage according to the FIFO principle (first - first out)
easy control of production batches and sell-by dates
considerable reduction of travel times
excellent overview of all references on stock
increased productivity due to separate loading and order picking aisles
space savings of up to 30 %
loading and retrieval can be done by automatic stacker cranes
|
|
Span-Track Can be Added to Any New or Existing Pallet Rack. No Shelves or Intermediate Support Required!
Super Flexibility
Simply pick up track to easily rearrange/reslot Span-Track to match SKU's.
High Capacity, High Durability
Span-Track takes the abuse of active warehouses and assembly plants. Galvanized steel side channels, 3/4" diameter tempered aluminum full width rollers and full length 3/16" steel axles handle loads up to 50 lbs. per ft.
Unrivaled Flow
Full-width rollers for total carton support - 300% more product contact than plastic wheel - eliminate hang-ups, increase throughput.
Economical
Installs in 1/3 the time of wheel tracks Longer useful life No replacement cost
|
|
Storing steel calls for robust solutions.
When planning for this steel wholesale store, storage requirements put on the racks by the stored material were heavily considered. Cantilever racks provided the perfect solution.
Steel in rods, tubes, and sheets: cantilever racks suit customer's storage requirements with the flexible and robust construction.
|
|
Racking compromises of frames and beams. Galvanised finish - Yellow beams RAL 1028
Maximum load capacity per frame: 7000kg with a first level at 1200mm
Maximum load capacity per level: 1600 and 2240kg
Level adjustable every 75mm
Length: 2700 or 3300mm.
Height 3000 or 4500mm
4 steel anchors per frame
|
|
|
We are a company specialized in the manufacture of Cantilever. Thanks to its broad line of goods, We are capable to offer a choice of approximately 50.000 columns with heights up to 12 meters and of approximately 5000 arms with different loads. The company has average data processing powerful which make it possible his/her collaborators to answer any request under 24 H.
|
|
|
We develop storage solutions for offices, archives and repositories at government institutions, libraries, museums, universities , financial organisations and healthcare organisations. We provide the Sysco® and Compactus® series of flexible and space saving filing and storage solutions: from simple to highly complex, for multinationals as well as local businesses.
|
|
|
|
