screw-in fitting / 90° angle / hydraulic / swivel
screw-in fitting
SJK

Diameter: 0.25 in - 1.5 in
Operating pressure: 315 bar

The SJK series comes with steel 42 Cr Mo 4 or stainless steel 1.4571. It has a PTFE compound seal and built-in ball-guiding tracks that are similar to ball bearings. It has swiveling and rotating movements with low speed. Its operating ...

screw-in fitting / 90° angle / hydraulic / brass
screw-in fitting

Diameter: 0.25 in - 2 in

-1/4″-2″ Standard -Brass / Steel / Stainless Steel material alternatives -S(stationary siphon) or RSP(rotary siphon) Models -Special models for special applications

screw-in fitting / straight / 90° angle / hydraulic
screw-in fitting
9000 series

Diameter: 8 mm - 65 mm
Operating pressure: 0 Pa - 40,000,000 Pa

ROTOFLUID 9000 Series Swivel Joints are widely used in applications requiring low and meidum load capacity with different material, seal and connections style alternatives. ROTOFLUID 9000 Series Swivel Joints are used for; -Hydraulics -Pneumatics -Water -Chemicals -Various ...

push-in fitting / straight / 90° angle / pneumatic
push-in fitting
FD series

Diameter: 8.75 mm - 16.9 mm

FD is another new generation fitting that has been made and created to be utilized within the lubrication frameworks. Our FD push-in fitting can remain up to a most extreme pressure of 300 bar. The universally ...

screw-in fitting / straight / 90° angle / hydraulic
screw-in fitting
NIPPLI, MANICOTTI, TAPPI

Exd Nipples allow connections between female mouthpieces. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - Stainless steel

screw-in fitting / 90° angle / straight / pneumatic
screw-in fitting
JWR series

Diameter: 4 mm - 28 mm
Operating pressure: 1,000,000 Pa

... pyramidal then push in and lock the ferrule Model: I Outside Insert Type Tube Fitting of Through End 6mm Thread:M10x1 Model: JWR-Z6M10X1 II Outside Insert Type Tube Fitting of Right Angle ...

screw-in fitting / T / 90° angle / straight
screw-in fitting
JSM series

Diameter: 4 mm - 12 mm
Operating pressure: 1,000,000 Pa

JSM Lock nut Type Tube Fitting (brass) Feature: It suitabe used on connecting nylon Pipes, Plastic Pipes.Maximum Pressures .OMpa,Convenient and Fix tightly Installation: Remove the nut first, connect the pipe to the joint ...

push-in fitting / 90° angle / pneumatic / nickel-plated brass
push-in fitting
KH series

Diameter: 12, 10, 8, 6, 4 mm
Operating pressure: 10,000,000 Pa

KH Push in Type Tube Fitting (BRASS) Use: Connect rigid pipes.semi-rigid pipes, plastic pipes. Maximum Pressure: 1.0Mpa.lt have the feature of quick push in and pull out. Installation: 1. Remove the bur and plug the pipe ...

socket fitting / 90° angle / zinc
socket fitting
S50x series

Diameter: 0.38 in - 2 in

... boxes. This liquid tight fitting is available with a variety of angle fitting options, including 45° and 90°. Specifications of Liquid Tight Conduit Fitting Material ...

See the other products
Zhejiang Flexible Technology Co,.Ltd
screw-in fitting / 90° angle / zinc
screw-in fitting
S221

Diameter: 0.38 in

Series No. S221 Product UL Listed Conduit Fitting, 3/8" Description 90 Degree Squeeze Type Conduit Size 3/8" Thread 1/2" Nut Approval C-UL-US E257570

See the other products
Zhejiang Flexible Technology Co,.Ltd
screw-in fitting / 90° angle / zinc
screw-in fitting
S231

Diameter: 0.38 in

S231 UL Listed Conduit Fitting, 3/8" 90 Degree Squeeze Type, Snap-ln 3/8" N/A Approval C-UL-US E257570

See the other products
Zhejiang Flexible Technology Co,.Ltd
threaded fitting / push-to-lock / 90° angle / pneumatic
threaded fitting
RC07

Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...

See the other products
SAF S.R.L.
threaded fitting / push-to-lock / 90° angle / pneumatic
threaded fitting
RC08

Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...

See the other products
SAF S.R.L.
threaded fitting / push-to-lock / 90° angle / pneumatic
threaded fitting
RC10

Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...

See the other products
SAF S.R.L.
abrasion-resistant fitting / 90° angle / pneumatic / cast iron
abrasion-resistant fitting
CM

Diameter: 2.5 in - 4 in

... flange produced in cast iron NiHard too and they are composed by three sectors of 30° so that they form curve in 30°, 60° and 90° and in add they allow the replacement of a single element too. The revolving split flange ...

socket fitting / 90° angle / hydraulic / copolymer
socket fitting
41415

Diameter: 0.25 in
Operating pressure: 50, 110 psi

Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...

socket fitting / 90° angle / hydraulic / copolymer
socket fitting
51824

Diameter: 0.5 in
Operating pressure: 30, 60 psi

Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...

socket fitting / 90° angle / hydraulic / copolymer
socket fitting
61515

Diameter: 0.75 in
Operating pressure: 20, 40 psi

Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...

screw-in fitting / 90° angle / hydraulic / PFA
screw-in fitting
UE

Diameter: 3 mm - 25 mm

... Specification FIT-ONE PFA (Fluoropolymer) Flare Type Union Elbow fitting Designed with simplicity and easy of installation High resistivly against pulling makes a reliable fitting ...

See the other products
BUENO TECHNOLOGY
screw-in fitting / 90° angle / hydraulic / PFA
screw-in fitting
FE

Diameter: 6 mm - 25 mm

Specification FIT-ONE PFA (Fluoropolymer) Flare Type Female Elbow fitting Designed with simplicity and easy of installation High resistivly against pulling makes a reliable fitting ...

See the other products
BUENO TECHNOLOGY
screw-in fitting / 90° angle / hydraulic / PFA
screw-in fitting
EA

Diameter: 19.05, 25.4, 31.8, 38.1 mm

Specification FIT-ONE PFA (Fluoropolymer) Elbow Adaptor fitting Designed with simplicity and easy of installation High resistivly against pulling makes a reliable fitting ...

See the other products
BUENO TECHNOLOGY
screw-in fitting / right-angle / hydraulic / nickel-plated brass
screw-in fitting
335-2

screw-in fitting / 90° angle / hydraulic / brass
screw-in fitting
3020

Diameter: 0.25 in - 2 in

screw-in fitting / 90° angle / hydraulic / stainless steel
screw-in fitting
4008

Diameter: 0.25 in - 3 in

screw-in fitting / 90° angle / hydraulic / stainless steel
screw-in fitting
4011

Diameter: 0.13 in - 3 in

push-in fitting / straight / 90° angle / 45° angle
push-in fitting
LF 3000®

Diameter: 4 mm - 16 mm
Operating pressure: 20 bar

The LF 3000® pneumatic fitting range, with its wide variety of shapes and configurations, allows you to find the perfect connector to meet your needs and thus optimise the use of your equipment.

screw-in fitting / push-in / straight / 90° angle
screw-in fitting
KQ2 series

Diameter: 2 mm - 23 mm
Operating pressure: -100,000 Pa - 1,000,000 Pa

KQ2, One-touch Fitting, for Metric Size Tube, M/R/Rc Connection Thread KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of ...

See the other products
SMC Corporation of America
cutting ring fitting / 90° angle / hydraulic
cutting ring fitting

The Gates EMB range of tube fittings is an integral part of the Port-to-Port product portfolio of Gates. It ensures leak free connections between hydraulic tubes, hoses and adaptors. The “made in Germany” quality ensures ...

screw-in fitting / 90° angle / hydraulic / stainless steel
screw-in fitting
2507-400-2-4

Diameter: 0.25 in
Operating pressure: 551 bar

This tube fitting was manufactured from stainless steel, which makes its design durable and resistant to various factors that can affect the quality of an application. With a standard cleaning and packaging (SC-10) process ...

See the other products
SWAGELOK
push-in fitting / right-angle / T / pneumatic
push-in fitting
KQ2 series

Diameter: 2 mm - 16 mm
Operating pressure: -100,000 Pa - 1,000,000 Pa

These one-touch fittings accept nylon and urethane tubes and are used for vacuum and positive pressure applications. These fittings have release collars, designed to allow easy removal of tubing to avoid ...

90° angle fitting / copper
90° angle fitting
LOKRING Cu 90-EB series

Diameter: 9.53 mm - 41.3 mm
Operating pressure: 0 bar - 50 bar

Description Supplied with the necessary stabilisation inserts. In accordance with EN 12735-1. Max. operating pressure: 50 bar (725 psi)

See the other products
VULKAN LOKRING Rohrverbindungen GmbH & CO. KG
ring fitting / compression / 90° angle / brass
ring fitting
KSY-WV90-15

Diameter: 15 mm

Compatible with polyamide and special aluminium alloy pipes Extremely robust and weatherproof, all parts made from brass Used in combination with plastic pipes the required support sleeves should be ordered with the compression ...

See the other products
Schneider Druckluft GmbH
socket fitting / 90° angle / stainless steel
socket fitting

Diameter: 80 mm - 300 mm

... protection. Bends with a diameter of more than 400 mm are made of lobster back segments. For limited space we offer bends R = 1 D, 90° in the common diameters up to 250 mm out of drawn half-liners. Bends for bulk ...

See the other products
Fr. Jacob Söhne GmbH & Co. KG
screw-in fitting / 90° angle / hydraulic / pneumatic
screw-in fitting
FS2500-FG series

Diameter: 0.25 in - 1.5 in

See the other products
BRENNAN Industries
push-in fitting / 90° angle / for compressed air / plastic
push-in fitting
PM22xxxxE series

Diameter: 12, 22, 15, 18 mm
Operating pressure: 7, 10 bar

Push-fit technology Quick disconnection without the need for tools Easy to alter or extend a system No corrosion Reduced maintenance and installation times

See the other products
JOHN GUEST
screw-in fitting / quick / 90° angle / hydraulic
screw-in fitting
SMS series

Diameter: 7.9 mm - 45.5 mm

Material: PA (Nylon) Colour: grey / black Sealing insert: TPE Temperature range: -30 °C to 100 °C Protection type: IP 68 Free of silicone, cadmium, halogen Further international approvals available Characteristics: Quick, simple ...

See the other products
Hugro Armaturen GmbH
cutting ring fitting / screw-in / 90° angle / hydraulic
cutting ring fitting
SR-506

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar

See the other products
Schwer Fittings
threaded fitting / 90° angle / for vacuum
threaded fitting
SVS-W Series

The complete program for safe vacuum and electrical connections. Threaded unions and plug-in connections, hose nipples, hoses in different designs and materials and retaining elements. For cabling vacuum valves and vacuum switches a multitude ...

See the other products
Albert Fezer Maschinenfabrik