|
|
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
Deburring and Roller Brushes
Use Deburring and Roller Brushes for a professional and perfect finish of cut edges. Diameter, filling material, measurements of the brush and the required bore are determined by the appointed machine and the work piece. We exclude any imbalance by evenly arranged filling material and the testing of every brush.
|
|
Deburring Brushes
Specially developed wheel brushes for deburring. These are suitable for all common deburring machines. Although they are heavier than other brushes because of their dense filling, we exclude any inbalance by evenly arranged filling material and the testing of every brush. Filled with high-quality wire, these brushes have a longer service life. All brushes are with double keyway. Please indicate the required bore.
Deburring End Brushes
These brushes are perfect for deburring tubes, profiles or even plane surfaces. Deburring end brushes are used in a set of 8, 16 or 24 single end brushes integrated in one deburring device. The metal bush fits all standard collets.
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
| ... products without technical information |
| |
Features
Including positive drum brake: Max. service and parking braking torque 12000 Nm
Suitable for special distributor blocks designed to include valve cartridges
Overall dimensions and weight lower than direct drive units
|
|
The radial piston design ensures very high starting torque efficiencies, especially at high pressures where they are most required in mobile applications. Efficiency is typically > 94% at 400 bar.
The maximum torque requirement for wheel motor applications generally occurs with the vehicle al standstill or at low speeds, for example, during acceleration from stand-still or when overcoming an obstacle or slope.
High starting torque in the hydraulic motors therefore means better vehicle performance, less energy wastage and heat generation, especially with frequent stop-start work cycles.
|
|
|
|
|
|
Description
This wheel motor is the latest addition to the Char Lynn product line. The Delta motor provides torques up to 11,500 in-lbs. Eaton has packed this motor with many "best in class" features: the optimized geroler profile ensures smooth operation; the disc valve technology has the best performance and the bearing capacity is the highest in the industry for very demanding applications.
Features:
- Excellent reliability with time proven Char-Lynn components
- Proven disc valve technology with the highest efficiencies in its class
- Leak resistant motor with the front bearing protecting the shaft seal
- Torque up to 10,500 lb-in intermittant duty / Flow up to 30 GPM intermittant
- 12 displacements available from 6.9 to 46 CID
- Shaft sizes up to 1-5/8 inch
- 3-1/4 inch front pilot and 5 inch rear pilot
- STC ports available
Benefits:
- Perfect replacement for Parker® TF-TG and WhiteTM RE motors
- Lowest no load pressure drop which leads to longer life and lower temperature operation
- Highest overall efficiency: more available HP to the system than competitive motors
- The highest side load capacity with 4,500 lbs standard at 3" from the mount face
Applications:
- Scissor Lift
- Boom Lift
- Industrial Sweeper
- Mower
|
|
MG MOTORS
90° steering angle
Up to 450 bar [6 530 PSI]
From 830 to 2 800 cm³/tr [51 to 154 cu.in/rev]
The two-speed configuration allows the operator to adjust torque to ground conditions
Integral hydraulic displacement shift solenoid eliminates hydraulic control pressure line
Integral hydraulic swivel eliminates hose and fitting wear caused by hose bending
Simple bolt-on mounting simplifies vehicle assembly
Optional pivot bracket
|
|
| ... products without technical information |
| |
|
|
|
|
Nexen offers an advanced new technology that revolutionizes linear motion. The Roller Pinion System (RPS) provides zero backlash, very high positional accuracy, unlimited length, very high speeds, 99% efficiency, high rigidity, low noise, low maintenance, corrosion resistance, and long life. This opens up
new design possibilities and provides the capability to achieve much higher levels of performance in machine designs.
The RPS's unique design eliminates many of the limitations of current linear drive systems like:
Ball Screws: Limited by critical speed, maximum speed, cumulative error, vibration, thermal expansion, supplemental cooling, noise, low efficiency, maintenance, and life.
Traditional Rack and Pinion: Limited by low accuracy and speed, backlash, tooth fatigue, noise, high cost of dual and split pinion systems, high maintenance, and short life.
Belt Drives: Limited by low accuracy, backlash, low load capacity, short lengths, belt stretch, and low rigidity.
Linear Motors: Limited by low load capacity, high cost, strong magnetic fields, and liquid cooling.
|
|
|
|
|
|
The new benchmark for electrical preload on demanding machine tool applications!
KRPX is the new version of REDEX ANDANTEX rack & pinion high-tech planetary reducers, offering cost effective, easy to implement and high performing solutions for moving column or gantry machine types as well as many other applications.
The KRPX housing is made of high quality spheroidal graphite cast iron. Its structure has been optimised with FEM analysis methods to avoid deflection during acceleration. Fixation is made by oversized screws to ensure a real still connection with the machine frame allowing the KRPX housings to be considered as an integrated part of the machine main frame.
The output pinions are machined to the same diameter as the shafts, allowing the best possible balance between transmissible torque and rigidity at the rack. In addition, output bearing consists of two preloaded and substantially oversized angular contact roller bearings.
This exclusive design offers exceptional compound stiffness which allows to dramatically decrease the radial bending (up to 60% of the overall distortion) and to increase the natural frequencies of the global Racks & Pinions drive systems.
Designed as an association of two high-tech planetary reducers, KRPX allows perfect mounting on both sides of the machine frame and enables true zero backlash when coupled with an electrical preload system.
Available in 3 standard universal sizes (2, 3 and 4) KRPX is very compact, a definitive advantage for helping implementation with respective pinion height not higher than 104, 127 and 148 mm.
With this new and innovative concept, the machine-tools designers can easily expect to exceed market standards with maximum feed capacity up to 105 000 N and stiffness on the rack up to 333 000 N/mm.
|
|
Dedicated to racks & pinions drive applications, the KRP+ design is based either on the use of one single unit or on the association of two top quality planetary reducers, mounted in parallel on the machine main frame.
When used as a SingleDRIVE, the KRP+ gives the benefit of an ultra high stiffness feed gearbox, dedicated to high performances rack & pinions drive systems.
When choosing the mechanical preload solution, the KRP+ become a DualDRIVE unit, which achieve the true backlash free feature by torsionally winding one pinion against the other through the rack.
Immediate benefits are to need only one motor, and to dramatically simplify the motor control.
When choosing the Electrical preload solution, the KRP+ is used as a TwinDRIVE unit, where the backlash is cancelled by the opposite torque balance between the two pinions, according with the two motors and drives remote control.
|
|
Dedicated to racks & pinions drive applications, the DRP+ design is based on the association of two top quality planetary reducers, mounted in parallel on an extra high stiffness universal frame.
When choosing the mechanical preload solution, the DRP+ become a DualDRIVE unit, which achieve the true backlash free feature by torsionally winding one pinion against the other through the rack.
Immediate benefits are to need only one motor, and to dramatically simplify the motor control.
When choosing the Electrical preload solution, the DRP+ is used as a TwinDRIVE unit, where the backlash is cancelled by the opposite torque balance between the two pinions, according with the two motors and drives remote control.
|
|
| ... products without technical information |
| |
Diamond Chain offer a range of British Standard products.
The standard range will cover 05B to 32B sizes and are manufactured to meet all ISO606/DIN8187/BS228 standards.
These are available in simplex, duplex & triplex.
There is also a small range of Oval Contour side plate (08B to 16B) and Stainless Steel 300 series (06B to 16B) product available
|
|
|
High performance roller chains and bush chains for drive and conveyor systems are available from stock. Every day new items are developed and applied for special applications successfully. We produce roller chains up to size 400 with 127 mm pitch, oilfield roller chains and marine-diesel roller chains.
|
|
|
The secret of our success at Tsubaki is the use of sophisticated computerized production techniques and a dedication to detail. Tsubaki RS Roller Chain bushings are specially produced for perfect concentricity and cylindrical accuracy. Tsubaki carburizes the pin surfaces using an advanced heat treating process. The link plates and rollers are shot- peened, and the surface areas between pins and bushings and between bushings and rollers are pre-lubricated. We then pre-load our roller chains continuously and accurately on multi-sprockets after assembly. The result is a great improvement in performance. We can confidently say that in terms of wear-life, durability, and maintenance cost Tsubaki RS Roller Chain clearly outperforms the competition.
|
|
Teleflex Morse coated helical cables and our competitor’s flocked cables were exposed to 240
hours of salt spray testing per ASTM B117. The results showed some red rust at the ends of the
Teleflex Morse cables and very small traces where the gear tooth broke through the plastic coating
after cycle testing. The flocked cables showed severe red rust throughout its length
|
|
|
All standard roller chains undergo continuous quality assurance and quality inspection. Iwis chains are pre-stretched, have a highly effective initial lubrication and are extremely wear-resistant with a service life significantly above the average.
|
|
Power transmission roller chains
BS Series
Simplex (from 8mm to 76.20mm pitch)
Duplex (from 9.525 to 76.20mm pitch)
Triplex (from 9.525 to 76.20mm pitch)
ASA Series
Simplex (from 12.70mm to 63.50mm pitch)
Duplex (from 12.70mm to 63.50mm pitch)
Triplex (from 12.70mm to 63.50mm pitch)
Other types
Stainless steel chains
Extended pitch chains
Bush chains
Guide chains
|
|
|
|
see the results for the following category : 
