|
|
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
Deburring and Roller Brushes
Use Deburring and Roller Brushes for a professional and perfect finish of cut edges. Diameter, filling material, measurements of the brush and the required bore are determined by the appointed machine and the work piece. We exclude any imbalance by evenly arranged filling material and the testing of every brush.
|
|
Deburring Brushes
Specially developed wheel brushes for deburring. These are suitable for all common deburring machines. Although they are heavier than other brushes because of their dense filling, we exclude any inbalance by evenly arranged filling material and the testing of every brush. Filled with high-quality wire, these brushes have a longer service life. All brushes are with double keyway. Please indicate the required bore.
Deburring End Brushes
These brushes are perfect for deburring tubes, profiles or even plane surfaces. Deburring end brushes are used in a set of 8, 16 or 24 single end brushes integrated in one deburring device. The metal bush fits all standard collets.
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
| ... products without technical information |
| |
Diamond Chain offer a range of British Standard products.
The standard range will cover 05B to 32B sizes and are manufactured to meet all ISO606/DIN8187/BS228 standards.
These are available in simplex, duplex & triplex.
There is also a small range of Oval Contour side plate (08B to 16B) and Stainless Steel 300 series (06B to 16B) product available
|
|
|
High performance roller chains and bush chains for drive and conveyor systems are available from stock. Every day new items are developed and applied for special applications successfully. We produce roller chains up to size 400 with 127 mm pitch, oilfield roller chains and marine-diesel roller chains.
|
|
|
The secret of our success at Tsubaki is the use of sophisticated computerized production techniques and a dedication to detail. Tsubaki RS Roller Chain bushings are specially produced for perfect concentricity and cylindrical accuracy. Tsubaki carburizes the pin surfaces using an advanced heat treating process. The link plates and rollers are shot- peened, and the surface areas between pins and bushings and between bushings and rollers are pre-lubricated. We then pre-load our roller chains continuously and accurately on multi-sprockets after assembly. The result is a great improvement in performance. We can confidently say that in terms of wear-life, durability, and maintenance cost Tsubaki RS Roller Chain clearly outperforms the competition.
|
|
Teleflex Morse coated helical cables and our competitor’s flocked cables were exposed to 240
hours of salt spray testing per ASTM B117. The results showed some red rust at the ends of the
Teleflex Morse cables and very small traces where the gear tooth broke through the plastic coating
after cycle testing. The flocked cables showed severe red rust throughout its length
|
|
|
All standard roller chains undergo continuous quality assurance and quality inspection. Iwis chains are pre-stretched, have a highly effective initial lubrication and are extremely wear-resistant with a service life significantly above the average.
|
|
Power transmission roller chains
BS Series
Simplex (from 8mm to 76.20mm pitch)
Duplex (from 9.525 to 76.20mm pitch)
Triplex (from 9.525 to 76.20mm pitch)
ASA Series
Simplex (from 12.70mm to 63.50mm pitch)
Duplex (from 12.70mm to 63.50mm pitch)
Triplex (from 12.70mm to 63.50mm pitch)
Other types
Stainless steel chains
Extended pitch chains
Bush chains
Guide chains
|
|
|
|
|
|
Can-Eng’s Roller Hearth Furnace Systems are workhorses for heat treating a great variety of materials. Whether you are annealing, bright annealing, normalizing, reheating, stress relieving or tempering, Can-Eng furnaces deliver consistent quality and reliable performance.
•Excellent for atmosphere and non-atmosphere heat treating
•Capacity up to 80,000 lbs/hr
•Flexible processing capabilities
•Excellent uniformity part to part
•Suitable for long product processing
•Recuperative and regenerative burner designs available for fuel efficiency
•Both direct and indirect-fired combustion systems are available
•Versatile product conveyance.
•Rolls allow for direct product loading or the use of fixtures and trays.
•High alloy heat resistant cast rolls
•Uniform temperature in heating chamber.
•Capacity up to 80,000 lbs./hr. (37,000 kgs/hr.)
•Combined over/under hearth firing available
•A wide range of protective atmospheres are available
•A variety of convective heat transfer fans are available
Applications: Carbon steels, Tool steels, Aluminum, Alloy steels, Stainless steels, Brass, Copper
Processes: Bright annealing, Stress relieving, Annealing, Normalizing
Quench and Temper, Reheating, Tempering
|
|
|
|
|
|
Steel rods and pipes are mainly heat-treated using roller hearth furnaces. The high temperature consistency and low energy consumption of these furnaces, normally gas-fired, ensure reproducible quality and short treatment times. The processes used for heat treating non-alloyed and alloyed carbon steel pipes at temperatures between 450°C and 1050°C include stress relieving, recrystallizing, normalizing, soft annealing and spheroidizing in indirectly fired continuous roller hearth furnaces. For the spheroidizing of pipes made from high-carbon ball bearing steel, vacuum vestibules to completely isolate the furnace atmosphere from the surrounding air are essential, at least at the furnace entry. Vacuum vestibules are also needed at the entry and exit of continuous roller hearth furnaces for the bright solution annealing of high-alloy austenitic pipes. In the heat treatment of copper alloy bars and pipes, zinc, which can be easily oxidized, is the critical element in the alloy. Rapid cooling is essential to ensure that the zinc is kept in solution. This can be achieved using optional high-convection cooling chambers with a hydrogen atmosphere.
|
|
Wellman's broad experience in building Roller Hearth Furnaces includes direct-fired and atmosphere furnaces for temperatures to 2100°F (1150°C). Fuel-fired or electrically heated designs are available.
These furnaces are ideal for lamination annealing, tube annealing and many other processes. For example, a successful Roller Heath line was provided for reheating molybdenum and tungsten sheets for rolling. It features a unique pulse-fired combustion system.
|
|
Reheating furnaces for blooms, slabs and billets
- car bottom, chamber and bell-type furnaces
- pusher-type furnaces
- suspended monorail furnaces with quenching and special dipping facilities for the quenching and tempering of axles, shafts and small parts
- conveyor-type quenching and tempering lines for forgings
- roller hearth furnaces for the heat treatment of wire coils
- special rotary hearth furnaces for the solution annealing and spheroidizing of CrNi steel wire coils
|
|
|
This is a continuous furnace suited for production of light alloy products such as engine parts and cast aluminum wheels. The solution heat treating process is ensured by good temperature distribution achieved through hot air circulation and a fast-feeding roller hearth mechanism to transfer the work load to the quench chamber.
|
|
| ... products without technical information |
| |
SRM 4555 Precision Roller-Style Coffee Grinder - Ideal for Gourmet, Laboratory, Pilot Facililty and Plant Applications
The superior grind quality of a roller style coffee grinder at the size and cost of a "disc" style grinder.
Since 1956, Modern Process Equipment has manufactured quality coffee grinding equipment, and the SRM 4555 roller style coffee grinder represents another product innovation from MPE.
The SRM 4555 is the world's smallest roller style coffee grinder producing up to 600 pounds per hour of ground coffee with an extremely uniform particle size. Utilizing the same technology as large "industrial" coffee grinders, the SRM 4555 produces grinds superior in quality to those attainable on disc or plate style
|
|
|
The material to be milled is placed between the feed and center rolls. Each adjacent roll rotates at progressively higher speeds. For example; the feed roll may rotate at 30 rpm, the center roll at 90 rpm and the apron roll at 270 rpm. Material is transferred from the center roll to the apron roll by adhesion. The dispersion is achieved by the shear forces generated between the adjacent rolls. The milled material is removed from the apron roll by a knife that runs against the roll.
|
|
|
Laboratory roll mills are machines for testing the quality and processing characteristics of polymer material by means of discontinuous plastification, mixing or kneading. In both, plastics and rubber processing as well as processing of ceramics or special materials, roll mills by Dr. Collin are setting new standards in terms of precision and reliability.
|
|
Laboratory 2-roll mills
RODOLFO COMERIO laboratory 2-roll mills are suitable to satisfy any mixing, measuring and development requirement of the product arising in the analysis laboratories and research Institues. These machines are designed to combine operational constancy and easiness with simble tests data determination and, furthermore, with control and measurement requirements of the operational parameters. A computer gives the possibility to program and automate the whole mixing process, thus improving the reproducibility of the tests of the whole sequence by means of tests carried out in automatic mode.
|
|
NFB "fuhrrheydt" roller shutters or roller grills are constructed with horizontally joined profiles made of aluminium and galvanised or stainless steel in single or double sheet version. These doors are coiled on a hollow shaft system by irreversible worm gear drives.
The basics are put together by roller shutters with various profiles, the tracks, the drum, the drive system with the stop brake and the control device. On request these doors are delivered in noise and climate insulated version as well as fire protection doors and bulletproof doors. Windows are available. At the bottom, the doors are sealed with a rubber profile, and at the top with brush sealings.
|
|
The powerful wireless components from elero can also overcome complex control tasks: whether wireless retro-fitting of existing drives, control of roller shutters or sun protection via venetian blind switches or integrated light control.
Innovative products offer installers the possibility to optimise the advantages of using wireless technology for every installation site, and develop individual radio solution from this.
|
|
| ... products without technical information |
| |
Hypro roller pumps are the number one all-around choice by farmers throughout the world. The rollers (from 4 to 8, depending on the model) revolve inside the pump housing to force the spray solution through the outlet to the nozzle. Roller pumps have a low initial cost and are extremely versatile. They operate efficiently at PTO speeds of 540 and 1000 rpm and have a wide pressure range of up to 300 psi and flow rates of 2 to 74 gpm. Roller pumps are self priming and easily adapt to PTO or gas engine drives. Specific seal, roller and casting materials can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
|
|
Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids. The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Construction features include a cast-iron, Ni-Resist or the new SilverCast%u2122 body and Super Rotor, 416 stainless steel shaft, sealed factory-lubricated ball bearings, cartridge-type lip seals of Viton, Buna-N or leather, and versatile Super Rollers.
Performance Information
- Max. flow: 33.1 gpm/125 lpm at 540 rpm; Max. flow: 62.1 gpm/235 lpm at 1000 rpm
- Max. pressure: continuous 100 psi/6.9 bar; Max. pressure: intermittent 150 psi/10.3 bar
- Max. rated speed: 1000 rpm
- Max. fluid temperature: 140°F/60°C
|
|
|
|
see the results for the following category : 
