|
|
|
The DeviceNet protocol dramatically reduces costs by integrating up to 62 devices on a 4-wire trunk network. Communications data is carried over two wires with a second pair of wires carrying power. Discrete and analog devices may be connected into the DeviceNet protocol.
|
|
|
AS-Interface networks up to 62 field devices onto a single pair of wires that delivers both signal and power. Actuator Sensor Interface, or AS-Interface, was developed by a group of sensor manufacturers and introduced into the market in 1994. Since that time, it has become the de facto standard for discrete sensors in process industries throughout the world. AS-Interface may be used in hazardous process environments using explosion proof, tray cable, nonincendive and for nonincendive wiring protection concepts.
|
|
Applications include:
-Automotive sheet metal and components
-High-speed bi-metal contact welding
-Storage Batteries
-Aircraft components (aluminum and titanium)
-Nut resistance spot welding
-Projection welds
-Motor armature fusing
-Markless welding
The ISA range of Inverter power supplies provides the highest level of control available today in large scale resistance spot welding. All models are intelligently packaged in “NEMA” style enclosures and are designed to deliver robust performance in the harshest of production environments.
|
|
Applications include:
-Automotive sheet metal and components
-High-speed bi-metal contact welding
-Storage Batteries
-Aircraft components (aluminum and titanium)
-Nut resistance spot welding
-Projection welds
-Motor armature fusing
-Markless welding
The ISA range of Inverter power supplies provides the highest level of control available today in large scale resistance spot welding. All models are intelligently packaged in “NEMA” style enclosures and are designed to deliver robust performance in the harshest of production environments.
|
|
Features:
- Displays Summary Process Data
- Closed-Loop Temperature and Time Control
- Real Time Temperature Graph
- Stores up to 15 Heating Profiles
- Statistical and Graphical Output to PC
- Process Alarms and Counters
- Remote Programming via PC
Uniflow2 is a power supply for selective hot bar soldering, heat sealing and conductive adhesive bonding applications. Utilizing pulsed heat technology, it provides targeted heating and precision temperature control for a variety of components including flex circuits, ribbon cables, wires, SMT components, single or dual sided edge connectors and thermocompression bonding of gold ribbon.
|
|
Features:
- Displays Summary Process Data
- Closed-Loop Temperature and Time Control
- Real Time Temperature Graph
- Stores up to 15 Heating Profiles
- Statistical and Graphical Output to PC
- Process Alarms and Counters
- Remote Programming via PC
Uniflow2 is a power supply for selective hot bar soldering, heat sealing and conductive adhesive bonding applications. Utilizing pulsed heat technology, it provides targeted heating and precision temperature control for a variety of components including flex circuits, ribbon cables, wires, SMT components, single or dual sided edge connectors and thermocompression bonding of gold ribbon.
|
|
In order to meet demands for complete, comprehensive system solutions, power supplies for mounting rail installation are available in the B&R product line. This extensive spectrum ranges from 2.1 A single-phase up to three-phase power supplies which can supply 40 A. All switching power supplies can manage a wide range of AC and DC input voltages. This input ranges from 100 to 240 VAC or 400 to 500 VAC and from 85 to 375 VDC. Devices are protected against short-circuit, overload, and open-circuit which allows them to be operated without functional limitations or derating even when overloads between 15% and 25% occur.
|
|
The ASX Series is a family of High Performance Switching AC power sources covering the power range from 1.5kVA to 6kVA (12kVA to be released soon). The product line offers both single and three phase models.
Power conversion within the ASX Series is achieved by high frequency pulse width modulation, resulting in cool, quiet and efficient operation.
Key Features Provide Application Versatility
- CE or ETL Listed available on request
-22 Waveform Library - Arbitrary Waveform Generator
-15 to 1,200 Hz Operation - 5,000 Hz Bandwidth
-Precision True-RMS metering of volts, amps, and power for displays and reporting
-RS-232 Interface with SCPI compatibility
-1 Phase/3 Phase Switch Selectable Output from front panel or bus command
-99 stored programs for both static and dynamic Transient Testing
-LabVIEW for Windows®/LabWindows® drivers
-Waveform Creation by Harmonic Synthesis
-Harmonic Analysis (Voltage and Current)
-Metering of RMS and Peak Values
-Continuous Self Calibration (CSC)
-Precision Voltage Programming - 0.05% with CSC engaged
-Programmable Output Impedance
-Up to 0-300 VAC Direct Coupled Out
-Power Levels from 1.5 kVA to 12 kVA
|
|
The AMX Series is a family of High Performance Linear AC power sources covering the power range from 500 VA to 12 kVA (Optional to 30kVA). The product line offers both single and three phase models.
An exceptionally broad bandwidth (50 kHz small signal) combined with peak/RMS current of 4-6:1 give the AMX Series the ability to produce high quality, low distortion output power into the most dynamic loads.
Key Features Provide Application Versatility
-CE and ETL Mark available
-IEEE-488.2 or RS-232C with SCPI compatibility
-LabVIEW for Windows®/LabWindows® drivers
-Waveform Creation by Harmonic Synthesis
-Graphical Analysis (Voltage and Current)
-Harmonic Analysis (Voltage and Current)
-Metering of RMS and Peak Values
-Continuous Self Calibration (CSC)
-Line Sync Option
-6:1 Peak Current Capability
-Low Impedance for IEC555 Testing
-Programmable Output Impedance
-Up to 0-300 VAC Direct Coupled Out, Higher voltage ranges available
-1 Phase / 3 Phase Switch Selectable from front panel or bus command
-20-5000 Hz Full Power Bandwidth
-Power Levels from 500 VA to 30 kVA
-Externally Referenced Meter Calibration
|
|
The G-Series are Solid State AC Power converters from 18kVA to 90kVA.
G-Series Systems are readily configurable as frequency converters, line conditioners, programmable test systems, and uninterruptible power systems.
The basic building block of a G-Series AC Power System is the mainframe. The mainframe consists of the cabinet and AC to DC power supply. Up to five mainframes may be paralleled to increase system output power up to 90 kVA.
Each Pacific power source is burned in and meticulously tested before it can leave the Pacific factory. With close attention to detail, handcrafted workmanship comes through with every system delivered.
Due to its modular design, failed device disconnect circuitry, and on-line module replacement, Pacific G-Series Systems are unmatched in reliability and ease of service.
|
|
|
Our power supplies are used in test laboratories, service centres, research and development departments and for production quality testing. They can be supplied with isolation windings, manual or automatic controls, electronic regulators or rectifiers to provide a DC output.
|
|
Achievers for Large Areas and High Sputter Rates
Generators in the medium frequency (MF) range combine several advantages:
* Higher process stability than direct current systems,
* More cost effective than RF solutions,
* Ideal in large area sputtering processes with high coating rates,
* In dual magnetron applications, they are the building blocks for architectural glass and thin film coating systems.
As the leading manufacturer of generators for large-area coating worldwide, HUETTINGER offers the best there is in generators in the medium-frequency range.
|
|
This type of generators represent a new industrial standard for applications
in under vacuum metallizing chambers.
The configuration of the power circuits.
The cooling by air (the system does not need any cooling by water,
avoiding all the problems may arise with this type of cooling)
The construction completely with solid-state components.
A modern Touch Panel used for the control of the generator, of the energy applied to the plasma chamber and for the management of the Mass-Flow-Control.
Are all requisities that position these equipments ahead for this type of applications.
|
|
Macro Results for Micro Processes
Radio Frequency (RF) generators for plasma excitation are useful for a variety of sputtering and etching applications. Many critical processes can only be successfully performed with RF solutions.
RF generators, with their very high output stability, are used in manufacturing the tiniest of devices, such as semiconductors and micro components.
Listed below are the HUETTINGER generators available in the RF range.
|
|
Alternative power supply 150 va
The EFS 8171 power supply provides a sinusoidal output, isolated from the line.
The output frequency may be set from 50 to 60 Hz and adjustable from 0 to 700 vrms in 6 ranges.
|
|
With the combined voltage and current source in a single compact chassis, the FX Series is the ideal choice for the simulation of high power levels. Either single or multi-phase, this versatile source can simulate power levels from just a few milliwatts
to 54kW single phase or 162 kW three-phase and provides a universal system for both manual and programmable control applications.
|
|
Performance:
The CXH series of hybrid, high frequency power supplies is designed to operate at a fixed frequency over the range of 2 to 40 MHz. The rugged amplifier design is well suited to demanding industrial applications where stability and reliability in the presence of erratic loads is required. The solid-state driver section features microprocessor control for precise power control and diagnostic monitoring.
Applications:
The CXH series of high power supplies provides stable, reliable RF power for industrial heating applications including drying, plastic welding, silicon crystal growing and flat panel.
Features:
Standard power ranges: 15kW, 25kW and 50kW
Rugged, reliable design for years of trouble-free operation
Simplified operation through microprocessor- controlled user interface
CX series solid-state driver requires no tuning or adjustments
Water cooling increases tube life by reducing thermal stress in high VSWR mismatched loads
RS-232 package standard
ETL Mark on CXH 25kW
|
|
Performance:
The CLF series generators provide stable process power up to 5 kW. The half-rack supplies operate at any fixed frequency from 20 to 50 kHz. The full- rack models can operate at any fixed frequency from 20 to 450 kHz or auto-tuned up to +/- 15% bandwidth. In many applications, the combination of auto-tune and excess power headroom will allow delivery of power to changing reactive loads without the need for mechanically tuned matching networks.
Applications:
The CLF series is designed to meet the performance demand in RF-driven plasma systems for semiconductor processing. Applications include etch, RIE, parallel plate, ICP, RF sputtering, CVD and PVD, as well as induction and dielectric heating processes in industrial systems.
|
|
G&M Power Plant has considerable experience in the design and manufacture of specialist industrial generators for the provision of:
- Base Load Power - (in the absence of a mains supply).
- Emergency & Standby Power - (in the event of mains supply failure).
- Peak-lopping - (a combination of base-load and emergency using the generating set to supplement the mains supply during periods of high demand in an effort to maintain lower pricing tariffs, whilst being available in the event of a mains supply failure).
Full choices of reliable, highly efficient industrial engines are used as prime movers. The generating sets, engineered for operation under all climatic conditions, can be found throughout the world in all of the above modes of operation.
|
|
EPOS 300 is the universal current and voltage source which comes into its own whenever maximum power and high signal accuracy are required. This makes EPOS the perfect choice when testing, setting and calibrating electricity meters, protection relays, fault recorders, power meters or power quality analysers, to name but a few applications.
Intelligent amplifier technology and fully synthetic signal generation make it possible to issue any signal shape across a wide frequency range or even to play back complex transient fault records.
EPOS 300 is designed for use as a stand-alone device or for operation via a PC. Using additional interfaces EPOS 300 can also be fully controlled by external devices such as reference meters, for example.
|
|
The EFS 8371 is an alternative voltage source that provides a sinusoidal output at 220 VA isolated from the main supply with a frequency of 50Hz or 60Hz. The output voltage is adjustable
from 0 to 700 Veff in 6 ranges (30V, 60V, 150V, 300V, 500V et 700V). It has a voltage
display and an accurate measurement of output current.
|
|
| ... products without technical information |
| |
|
|