|
|
|
|
|
|
SMI series is made up of single and three-phase asynchronous electric motors with integrated frequency converter. Power range is between 0,37 kW and 7.5 kW (frame size from 71 up to 132). Unit is made up of a high-efficiency three-phase asynchronous electric motor and a compact frequency inverter placed at the non drive end. The SMI series motors are TEFC, IP 55 (available IP56), class F (class H available). SMI motors offer a wide range of overload capacity and a high thermal reserve. The frame consists of aluminium alloy. Shields and flanges are aluminium up to axis height 90 and cast iron from 100 up to 132 frame size . The inverter housing is isolated from the motor in order to avoid heat transmission (patented system); inverter dissipator is self-ventilated. The frequency converter electronics is very reliable as it has been developed in cooperation with the main inverter manufacturer companies; control can be V/F type (frequency voltage control) or SLV type (sensorless vector control). SMI motor can be easily programmed using only three buttons. On request, motor can be arranged for main Bus fields (Profibus, Interbus-S, Device, etc.):
SMI motors are projected as built-in inverter motors and not just as simple assembly of a standard motor with an inverter.
|
|
Here at ABM the electric drives, drive mechanism, brakes and control electronics form a perfectly coordinated drive unit.
Just tell us what you want from your drive (speed, torque, speed variability from/to): We make sure that what comes out of the drive shaft is what you need.
the combination of inverter and drive (reduction ratios)
interaction of inverter and motor (configuration of winding, cut-off frequency etc.)
brake configuration (type, drive etc.)
choice of sensor
interconnection between control system and frequency converter
|
|
Type Code: AEHEVS
3-Phase Inverter Duty Induction Motor
Low Voltage, TEFC, NEMA T-Frame, Design B or C
Output 1 ~ 300 HP
Pole (Speed) 2 ~ 6
Voltage below 600V
Frequency (Hz) 50, 60
Frame Size 143 ~ 449
Protection Enclosure IP 54
Design Standard: NEMA MG-1, MG-13
Environment: non-hazardous
Stator Insulation: Class F Insulation
|
|
The Imperial AC Hoist Motor is renowned for providing enduring dependability and is configured for foot mounting with all currently popular machine designs. Additionally, NEMA C or D, Titan I flanges, and special mounts are available. A range of high and low slip single speed designs for the VVVF drive applications are offered, RPM from 1800 to 600.
NOTE: Consult your sales engineer for Class F and TEFC designs.
|
|
| ... products without technical information |
| |
180° tilter, the pallet turner
Brief description
To tilt a load through 180°. For instance, to change a pallet under a load. Because the entire load is rotated, i.e. the pallet lies on top and can be changed and then tilted back through 180° to the normal position. For technical specifications: see PDF.
|
|
DP060 Automatic pallet rotater
DESCRIPTION
Machine to rotate pallets automatically
ADVANTAGES
Rotates pallets so that bottles are positionned on the pallet with their neck up side down
Easy to adjust up to 1200 x 1200mm
Complete clamping of the sides of the pallet (bottles cannot fall out)
Rotates up to 40 pallets per hour
|
|
PalletPal Pallet Rotator / Inverter
With the ability to handle pallet loads measuring up to 48" x 48" x 60" high, the Southworth PalletPal Pallet Inverter is a simple, rugged machine designed to invert entire pallet loads. The pressure adjustable clamping mechanism easily secures loads up to 4,400 pounds and rotates them 180 degrees on a massive anti-friction turret bearing. Here are just a few uses:
Replace broken pallets
Switch loads to/from in-house or shipping pallets
Transfer from pallets to slip sheets
Replace damaged goods at the bottom of the load
|
|
*Food manufacturers can eliminate wooden pallets from the processing floor. Timber pallets can be swapped for "clean room" standard in-house plastic or steel pallet .
*In automated storage and retrieval systems where pallets are routinely checked and defective pallet loads must be exchanged.
*Export goods on rental or in-house pallets canbe transferred to another pallet (or slip sheet) suitable for export.
*Pallet loads which need to be straightened and "squared up".
|
|
Lev 600 pallet tilter
Handling for boxes
Capacities :
- Max load = 350 kg up to 1,70 m
|
|
Applications include:
-Automotive sheet metal and components
-High-speed bi-metal contact welding
-Storage Batteries
-Aircraft components (aluminum and titanium)
-Nut resistance spot welding
-Projection welds
-Motor armature fusing
-Markless welding
The ISA range of Inverter power supplies provides the highest level of control available today in large scale resistance spot welding. All models are intelligently packaged in “NEMA” style enclosures and are designed to deliver robust performance in the harshest of production environments.
|
|
|
|
|
|
Miyachi Europe offers the high end welding system AWS3 with ISQ 20-10K especially for automotive, tooling and electric/electronic industry requiring high end interfacing and high speed automation. The new product expands the weld current range up to 10kA.
Applications:
Automotive: Lead frame welds, connectors, compacting, pumps, motors, coils
Tooling: Burrs, saw blades large
Electric/Electronic: Components (e.g. capacitors, resistors), fuses, motor switches, relays, contacts, electrical motor fusing, magnet wire welding
Technical Specifications:
max current weld head with short secondary cables 2 x 400mm², length 500mm measured = 10kA
Benefits:
+ Compact design like ISQ20-6
+ High duty cycle
+ High output power (250A)
+ External transformer water cooled
+ Interfacing identical to ISQ20-6
+ Full AWS3 functionality
Dimensions (mm):
Inverter: 216 x 420 x 480 (W x D x H)
Transformer: 284 x 110 x 170 (W x D x H)
Weight (in kg): Inverter: 20kg; Transformer: 16kg
Power requirements: 3 x 400VAC, 50/60 Hz, 20kVA
Legal Approvals: CE compliant
|
|
Inverter Power Supply - IS 120
Inverter Power Unit
Controlled DC Inverter for a wide range of applications - Compact device with terminal and remote transformer
Features
External programming panel
Connection to all mian voltages
Indication of all actual values
Status and error detection in clear text
Applications
Well-suited for automation
Maximum quality requirements
Safety critical environment
Materials with very poor welding properties
Use
Economical and efficient operation
Stable processing and high reproducibility
High grade of weld
Integrated process monitoring
Optimum quality documentation
|
|
Inverter type power supply for spot welding (resistance)
Average rate 1000 - 2000 Hz
18 to 72 KA standard - Parallel to strong currents
QUALITY - PERFORMANCE
- Provision of energy very quickly
- Time welding reduced
- Low projection area
- High quality welding
- Increased speed welding
- Ideally suited for hard coating materials
- Welding of non-ferrous materials (aluminum - copper - brass - etc ...)
- High reproductibility of welding points
- Loop and exhibit no influence on the welding
- Ease of integration transformer welding weight and small size (board)
ECONOMY
- Performance (70%)
- Reduction of energy consumption
- Reduced infrastructure costs
- Need cooling reduced
- Low wear electrodes
CONTROLLER FOR THE RESISTANCE WELDING
|
|
|
The perfect integration between motor and inverter, with a powerful and efficient algorithm in a robust IP66 casing. Features versatile control with a wide range of field buses and a practical and flexible interface. A product that marks an innovative response to the most rigid demands for application.
|
|
PR+MSF worm geared motors with pre-stage helical units.
Worm gear speed reducers type SF-MSF are a new generation of products developed by our company.
|
|
| ... products without technical information |
| |
Wide selection with the inverter series
Our wide-ranged lineup meets customer needs when it comes to functions and indoor unit types.
Enhanced comfort with Daikin inverter
Comfortable air conditioning is achieved through variable output control made possible by the inverter, which continually maintains the set temperature while detecting load, which varies with time of day and number of room occupants.
|
|
Reversible medium capacity air-to-water INVERTER heat pump for heating and cooling in individual or collective housing, tertiary, hotel or healthcare sectors.
May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes), air handling units or low-temperature radiators.
Designed as standard for outdoor installation in an urban environment without any special weather protection.
2 models available
- IVDC: Reversible heating or cooling with hydraulic system, without tank
Heating capacity from 41 to 53 kW
Cooling capacity from 36 to 47 kW
|
|
PV inverter choke
Application :
PV inverter from 2kW up to 30kW
Gamme :
Current range from 5A up to 50A
|
|
| ... products without technical information |
| |
ith Amcon's origins in the cushioning market, we have unparalleled expertise in fabricating the myriad of foam shapes and densities critical to today's bedding, mattresses, office and residential furniture, restaurant booths and chairs, and more.
We stock a wide variety of high-resiliency, premium quality foams and medium density foams, as well as flame retardant and anti-microbial foams in many different densities and firmnesses. Our diversified fabricating capabilities can manufacture foam in any shape or size, and can laminate different densities of foam together. We can assist you with design and material selection, assuring you the best material for your application.
|
|
Our special conductive blend and manufacturing process ensures full surface coverage with minimal residue for consistent, cost effective, ESD protection.
Amshield and Amstat can be custom fabricated to almost any size or shape per your specifications.
Amshield is a permanent, conductive, polyurethane material available in three densities.
Amstat is a permanent, static dissipative, polyurethane material which is also available in three densities.
|
|
At Amcon, we solve problems that help customers win business.
* We stock many formulations of polyurethane foam in a range of grades, from fire-retardant and anti-microbial to colorfast.
* We stock polyethylene foam in densities ranging from 1.2 to 9 pounds per cubic foot, with anti static, military specification, and fire retardant options available upon request.
* We stock beaded expanded polyethylene (EPE) and expanded polypropylene (EPP) in various colors, sizes, and densities.
* We stock many grades of neoprene, vinyl nitrile, and crosslinked polyethylene, as well as low permeability foam, reticulated foam, polyester foam and felted foam.
* We can perform any level of subassembly, kitting, or final assembly.
|
|
e offer a full range of materials, including polyurethane, polyethylene, polypropylene, and neoprenes, in any shape or size an application might require.
At Amcon, we solve problems that help customers win business.
* We stock many formulations of polyurethane foam in a range of grades, from fire-retardant and anti-microbial to colorfast.
* We stock polyethylene foam in densities ranging from 1.2 to 9 pounds per cubic foot, with anti static, military specification, and fire retardant options available upon request.
* We stock beaded expanded polyethylene (EPE) and expanded polypropylene (EPP) in various colors, sizes, and densities.
* We stock many grades of neoprene, vinyl nitrile, and crosslinked polyethylene, as well as low permeability foam, reticulated foam, polyester foam and felted foam.
* We can perform any level of subassembly, kitting, or final assembly.
|
|
This generator powered by the Honda GX390 engine comes standard with a wheel kit for easy use. It also has the option of electric start for further convenience. Thanks to the Honda OHV commercial grade engine, this generator can produce a maximum of 6500 watts of power and features automatic voltage regulator, auto idle, automatic choke and fuel cut solenoid for operation with the optional remote start kit. In addition this generator has an full frame for protection and 120/240V operation.
The voltage selection switch allows for total generator output to be available through each of the 120 volt outlet for powering electric motors with large starting requirements (Output is limited to the rating of each receptacle). This model is an ideal emergency home power generator when a 1 Hp deep well pump is present.
|
|
|
|
