|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 20Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 200 - 230V AC or 100 - 115V AC
Marking: CE, UL and cUL
|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 30Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 110/115V AC or 220/230V AC
Marking: CE, UL and cUL
|
|
H-compact
Maximum power - minimum size
The increasing significance of energy-saving, environmental legislation, the desire for even smaller dimensions and the demands of domestic and international markets have led to the further development of the H-compact series that has proven itself over the years.
H-compact motors are used in the widest range of industry sectors - such as oil & gas, paper, chemical industry or steel. In these sectors, they are used to drive compressors, blowers, refiners, crushers and air separation systems.
H-compact is available in a version for direct connection to the line supply and in a version for converter operation.
H-compact is also available in an explosion-proof version.
As a result of its innovative technology, H-compact sets new standards for high-voltage motors.
|
|
As a result of their modular design, the 1R.5 slipring rotor motors (US: wound-rotor motors) can be produced with various cooling systems. This means that the motors can be flexibly adapted to the customers's application.
The enclosed slipring compartment – located inside the NDE bearings – guarantees a high degree of protection for the complete motor, i.e. for the motor and slipring compartment.
Brief overview
Motor type: Slipring rotor
Water-cooled motors: 1RU5 type series
Air-cooled motors: 1RR5 type series
Shaft heights: 400, 450, 500, 560, 630, 710, 800, 900 mm
Power range: 0.3 to 8 MW
Rated voltages: 3.3 - 11 kV
Degree of protection: IP55
Cooling type: IC 611, IC 81 W, IC 01
Type of construction: IM B3 (IM 1001)
Bearings: Roller bearings (up to SH 710), sleeve bearings (from SH 800)
Regulations/Standards: IEC, EN
|
|
N-compact Standardline
N-compact Standardline motors are favorably priced and standardized low-voltage motors. They are based on the technology of our well-proven N-compact series that, for sophisticated applications, already set standards for low-voltage motors.
4-pole N-compact Standardline motors cover a power range from 250 to 500 kW.
|
|
|
With the X-Class, Force Control transforms oil-shear technology into affordable, off-the-shelf designs. Four standard models-XB1, XB2, XB3, and XB4, covers the most popular size range for brakes. Convenient double C-face or motor brake mounting and Clamped-Split-Quill allows drop-in, bolt-up installation.
|
|
WATT EUSAS motors are top quality three-phase AC industrial models from Watt Drive’s customer-oriented modular WATT MAS 2000 motor system.
EUSAS stands for EUROPA - USA - ASIEN and means that the wide voltage range and simple voltage selector in the terminal box enable the motor to be operated with virtually any supply voltage and frequency worldwide.
|
|
Properties of the three-phase AC motors
The long, slim three-phase AC motors made of extruded aluminium profile are optimally attuned to the CDA3000 inverter and the CDD3000 servocontroller. They usually construct a size smaller than standard IEC motors (with the same output in mode S1) and are dynamic as asynchronous servomotors.
What customizations are possible for three-phase AC motors?
* Protection up to IP66
* Special voltage and special rotation speed
* Specific connection technique
* Different design
* Cast motors
* Special shafts
* Flange adaption
|
|
Asynchronous-/ Main Spindle Drives
With the 1PH motor series, compact motors with different variations are available :
1PH2, water-cooled integrated motors for direct mounting of the motor in the driving shaft
1PH4, water-cooled compact asynchronous motors
1PH6 / 1PH7, air-cooled compact asynchronous motors
Features
Asynchronous motor with squirrel-cage rotor
Almost maintenance-free
Compact design with high power density
High speeds up to 12000 rpm
Integrated, high-quality measuring system for speed and position control
Almost servo quality in conjunction with SIMODRIVE 611
Power spectrum from 3.7 kW up to 100 kW
|
|
Direct drive Dividing Apparatus TA Sk 50:
Rotational axis for dividing in machine tools or other processing machines. Due to the direct drive implemented in this machine far higher r.p.m. rates can be achieved than as with comparable worm driven devices. Work pieces can thus for instance be treated by cylindrical surface grinding. The drive is absolutely free from any play or float.
|
|
STALL TORQUE:
10 to 600 Nm
POLARITY:
12, 24, 30 poles
RATED SPEED:
200 - 300 - 400 - 500 - 1000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
high torque density and high performance
CE certification
cURus certification
OPTIONS:
feedback by encoder/resolver (Heidenain, Stegmann, Tamagawa)
hollow shaft
frameless
water cooled
|
|
H-modyn: Individual drive solutions for application and industry sector-specific customer requirements
The H-modyn machines for induction motors, synchronous motors and generators are suitable for use in the whole of the process industry. Either Oil & Gas, Offshore, Chemical, Steel, Water or Wastewater, Air separation, Pulp & Paper, or others - every branch will find the right machine.
In these industry sectors, with a high power requirement, these machines are preferably used for the following applications:
* Compressors
* Pumps
* Generators
* Refiners
* Blowers
and more
|
|
HT-direct motors are permanent-magnet synchronous motors that can provide high torques at low speeds directly at the driven machine. High efficiencies and good power factors can also be achieved at low speeds as a result of the permanent magnet rotors.
The HT-direct motors are offered as a harmonized system together with SINAMICS drive converters.
The HT-direct motor / SINAMICS drive converter represents a drive solution with a long service lifetime but with low lifecycle costs and high efficiency for applications with low operating speeds.
|
|
| ... products without technical information |
| |
milling spindle
with three-phase motor or synchronous motor drive
No refrigeration needed
Attachment of the spindle unit with housing, flange Pinole
Rugged construction with hardened and ground spindle
Tool fixture SK40, HSK63
Speed range up to 6,000 rpm
Drive power to 27kW
Spindle bearing inner diameter 70mm
Labyrinth seal with sealing air connection
Automatic tool change with hydraulic actuation possible
Internal coolant supply or minimum quantity lubrication possible
|
|
The muscle behind the motion.
Rugged, robust and reliable, hydraulic motors from Hägglunds can be used just about anywhere on land or at sea. From the bitter cold of Siberia to the blistering heat of Africa, they withstand the challenges of any environment and any type of industry.
Likewise, our motors can drive any application, from small winches to the largest bucket wheel reclaimers. Our broad range of motors covers the whole spectrum of needs, providing either shaft or housing rotation and handling everything from 5000 to 1 400 000 Nm.
|
|
Proving that size matters.
Hägglunds’ Marathon motor is a giant – not only when it comes to size, but also when it comes to performance. By far the largest hydraulic motor in the world, Marathon is specially engineered for extreme, high-torque applications.
Despite its heavy-duty design and intimidating size, the Marathon motor offers excellent controllability and resistance to shock loads. As a result, it lets you handle large, dusty, corrosive and explosive applications with unexpected finesse. Even in extreme heat or freezing cold, a Marathon drive provides years of reliable service.
|
|
The muscle behind the motion.
Rugged, robust and reliable, hydraulic motors from Hägglunds can be used just about anywhere on land or at sea. From the bitter cold of Siberia to the blistering heat of Africa, they withstand the challenges of any environment and any type of industry.
Likewise, our motors can drive any application, from small winches to the largest bucket wheel reclaimers. Our broad range of motors covers the whole spectrum of needs, providing either shaft or housing rotation and handling everything from 5000 to 1 400 000 Nm.
|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
Image Desc
click to enlarge
Image Desc MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
Xenus
100-240 VAC Digital CANopen Amplifier for Brushless/Brush Motors
Built-in position sensor (12 µ repeatability)
Moving-rod actuator
Moving-forcer motor
Matched Xenus and Accelnet controllers
High rigidity version with outrigger bearings
No lubricant, internal actuator bearing
Drop-in cylinder replacement
Quiet operation
Food-safe
Holding brake option
|
|
FHA-C mini Series Servo Actuators, combining precision Harmonic Drive gearing with AC servo motors, offer unique features unsurpassed by conventionally geared drives. Used in highly demanding industrial servo systems they provide precision motion control and high torque capacity in a very compact package.
Sine-commutated AC servo motors provide smooth torque without the brush wear or commutation limit associates with DC servo actuators. Encoder, mounted directly onto the motor shaft, provide position feedback information. The backlash-free Harmonic Drive gear is provided with grease lubrication specially developed to ensure minimum maintenance requirements and long service life.
The fully digital SC-610 Series Controllers are available for the control of these Servo Actuators. A menu driven setup software running under MS-Windows allows a comfortable parameter optimisation and system diagnosis.
|
|
| ... products without technical information |
| |
Enclosed DOL starters, safety switch disconnectors, thermal-magnetic motor circuit breakers
Description
TeSys wall-mounted DOL starters LG, LJ
Enclosed DOL starters are used to control starting or stopping of the machine
TeSys motor-starter solutions incorporate 2 auxiliary contacts which allow them to be integrated in safety wiring diagrams
TeSys Vario switch disconnectors
Installed on an enclosure or in a cabinet, these rotary control switch disconnectors act as circuit load breakers
Available in open or enclosed version
Fixed on the front panel or DIN rail mounted
Padlockable versions
Thermal-magnetic motor circuit breakers TeSys GV2-ME
|
|
Circuit Breaker and Transient Voltage Surge Suppressor
The Siemens circuit breaker and transient voltage surge suppressor is comprised of a highly effective TVSS module integrated with (2) 1-pole circuit breakers. This device incorporates the robust features of our secondary circuit breaker surge arrester with a lower clamping voltage ratings.
Two red LED indicator lights are provided to show that surge protection is provided for all circuits connected to the panelboard. As a Siemens exclusive feature, the device notifies the owner of loss of surge protection by tripping one or both of the circuit breakers. These breakers should be used for circuit protection of frequently used household or facility circuits because the lights and devices connected to these circuits provide an effective indication that surge protection is being provided.
|
|
|
|